| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2016 Socionext Inc. |
| * Author: Masahiro Yamada <yamada.masahiro@socionext.com> |
| */ |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <dm/device_compat.h> |
| #include <linux/bitfield.h> |
| #include <linux/bitops.h> |
| #include <linux/bug.h> |
| #include <linux/io.h> |
| #include <linux/iopoll.h> |
| #include <linux/sizes.h> |
| #include <linux/libfdt.h> |
| #include <mmc.h> |
| #include <sdhci.h> |
| |
| /* HRS - Host Register Set (specific to Cadence) */ |
| #define SDHCI_CDNS_HRS04 0x10 /* PHY access port */ |
| #define SDHCI_CDNS_HRS04_ACK BIT(26) |
| #define SDHCI_CDNS_HRS04_RD BIT(25) |
| #define SDHCI_CDNS_HRS04_WR BIT(24) |
| #define SDHCI_CDNS_HRS04_RDATA GENMASK(23, 16) |
| #define SDHCI_CDNS_HRS04_WDATA GENMASK(15, 8) |
| #define SDHCI_CDNS_HRS04_ADDR GENMASK(5, 0) |
| |
| #define SDHCI_CDNS_HRS06 0x18 /* eMMC control */ |
| #define SDHCI_CDNS_HRS06_TUNE_UP BIT(15) |
| #define SDHCI_CDNS_HRS06_TUNE GENMASK(13, 8) |
| #define SDHCI_CDNS_HRS06_MODE GENMASK(2, 0) |
| #define SDHCI_CDNS_HRS06_MODE_SD 0x0 |
| #define SDHCI_CDNS_HRS06_MODE_MMC_SDR 0x2 |
| #define SDHCI_CDNS_HRS06_MODE_MMC_DDR 0x3 |
| #define SDHCI_CDNS_HRS06_MODE_MMC_HS200 0x4 |
| #define SDHCI_CDNS_HRS06_MODE_MMC_HS400 0x5 |
| #define SDHCI_CDNS_HRS06_MODE_MMC_HS400ES 0x6 |
| |
| /* SRS - Slot Register Set (SDHCI-compatible) */ |
| #define SDHCI_CDNS_SRS_BASE 0x200 |
| |
| /* PHY */ |
| #define SDHCI_CDNS_PHY_DLY_SD_HS 0x00 |
| #define SDHCI_CDNS_PHY_DLY_SD_DEFAULT 0x01 |
| #define SDHCI_CDNS_PHY_DLY_UHS_SDR12 0x02 |
| #define SDHCI_CDNS_PHY_DLY_UHS_SDR25 0x03 |
| #define SDHCI_CDNS_PHY_DLY_UHS_SDR50 0x04 |
| #define SDHCI_CDNS_PHY_DLY_UHS_DDR50 0x05 |
| #define SDHCI_CDNS_PHY_DLY_EMMC_LEGACY 0x06 |
| #define SDHCI_CDNS_PHY_DLY_EMMC_SDR 0x07 |
| #define SDHCI_CDNS_PHY_DLY_EMMC_DDR 0x08 |
| #define SDHCI_CDNS_PHY_DLY_SDCLK 0x0b |
| #define SDHCI_CDNS_PHY_DLY_HSMMC 0x0c |
| #define SDHCI_CDNS_PHY_DLY_STROBE 0x0d |
| |
| /* |
| * The tuned val register is 6 bit-wide, but not the whole of the range is |
| * available. The range 0-42 seems to be available (then 43 wraps around to 0) |
| * but I am not quite sure if it is official. Use only 0 to 39 for safety. |
| */ |
| #define SDHCI_CDNS_MAX_TUNING_LOOP 40 |
| |
| struct sdhci_cdns_plat { |
| struct mmc_config cfg; |
| struct mmc mmc; |
| void __iomem *hrs_addr; |
| }; |
| |
| struct sdhci_cdns_phy_cfg { |
| const char *property; |
| u8 addr; |
| }; |
| |
| static const struct sdhci_cdns_phy_cfg sdhci_cdns_phy_cfgs[] = { |
| { "cdns,phy-input-delay-sd-highspeed", SDHCI_CDNS_PHY_DLY_SD_HS, }, |
| { "cdns,phy-input-delay-legacy", SDHCI_CDNS_PHY_DLY_SD_DEFAULT, }, |
| { "cdns,phy-input-delay-sd-uhs-sdr12", SDHCI_CDNS_PHY_DLY_UHS_SDR12, }, |
| { "cdns,phy-input-delay-sd-uhs-sdr25", SDHCI_CDNS_PHY_DLY_UHS_SDR25, }, |
| { "cdns,phy-input-delay-sd-uhs-sdr50", SDHCI_CDNS_PHY_DLY_UHS_SDR50, }, |
| { "cdns,phy-input-delay-sd-uhs-ddr50", SDHCI_CDNS_PHY_DLY_UHS_DDR50, }, |
| { "cdns,phy-input-delay-mmc-highspeed", SDHCI_CDNS_PHY_DLY_EMMC_SDR, }, |
| { "cdns,phy-input-delay-mmc-ddr", SDHCI_CDNS_PHY_DLY_EMMC_DDR, }, |
| { "cdns,phy-dll-delay-sdclk", SDHCI_CDNS_PHY_DLY_SDCLK, }, |
| { "cdns,phy-dll-delay-sdclk-hsmmc", SDHCI_CDNS_PHY_DLY_HSMMC, }, |
| { "cdns,phy-dll-delay-strobe", SDHCI_CDNS_PHY_DLY_STROBE, }, |
| }; |
| |
| static int sdhci_cdns_write_phy_reg(struct sdhci_cdns_plat *plat, |
| u8 addr, u8 data) |
| { |
| void __iomem *reg = plat->hrs_addr + SDHCI_CDNS_HRS04; |
| u32 tmp; |
| int ret; |
| |
| tmp = FIELD_PREP(SDHCI_CDNS_HRS04_WDATA, data) | |
| FIELD_PREP(SDHCI_CDNS_HRS04_ADDR, addr); |
| writel(tmp, reg); |
| |
| tmp |= SDHCI_CDNS_HRS04_WR; |
| writel(tmp, reg); |
| |
| ret = readl_poll_timeout(reg, tmp, tmp & SDHCI_CDNS_HRS04_ACK, 10); |
| if (ret) |
| return ret; |
| |
| tmp &= ~SDHCI_CDNS_HRS04_WR; |
| writel(tmp, reg); |
| |
| return 0; |
| } |
| |
| static int sdhci_cdns_phy_init(struct sdhci_cdns_plat *plat, |
| const void *fdt, int nodeoffset) |
| { |
| const fdt32_t *prop; |
| int ret, i; |
| |
| for (i = 0; i < ARRAY_SIZE(sdhci_cdns_phy_cfgs); i++) { |
| prop = fdt_getprop(fdt, nodeoffset, |
| sdhci_cdns_phy_cfgs[i].property, NULL); |
| if (!prop) |
| continue; |
| |
| ret = sdhci_cdns_write_phy_reg(plat, |
| sdhci_cdns_phy_cfgs[i].addr, |
| fdt32_to_cpu(*prop)); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static void sdhci_cdns_set_control_reg(struct sdhci_host *host) |
| { |
| struct mmc *mmc = host->mmc; |
| struct sdhci_cdns_plat *plat = dev_get_plat(mmc->dev); |
| unsigned int clock = mmc->clock; |
| u32 mode, tmp; |
| |
| /* |
| * REVISIT: |
| * The mode should be decided by MMC_TIMING_* like Linux, but |
| * U-Boot does not support timing. Use the clock frequency instead. |
| */ |
| if (clock <= 26000000) { |
| mode = SDHCI_CDNS_HRS06_MODE_SD; /* use this for Legacy */ |
| } else if (clock <= 52000000) { |
| if (mmc->ddr_mode) |
| mode = SDHCI_CDNS_HRS06_MODE_MMC_DDR; |
| else |
| mode = SDHCI_CDNS_HRS06_MODE_MMC_SDR; |
| } else { |
| if (mmc->ddr_mode) |
| mode = SDHCI_CDNS_HRS06_MODE_MMC_HS400; |
| else |
| mode = SDHCI_CDNS_HRS06_MODE_MMC_HS200; |
| } |
| |
| tmp = readl(plat->hrs_addr + SDHCI_CDNS_HRS06); |
| tmp &= ~SDHCI_CDNS_HRS06_MODE; |
| tmp |= FIELD_PREP(SDHCI_CDNS_HRS06_MODE, mode); |
| writel(tmp, plat->hrs_addr + SDHCI_CDNS_HRS06); |
| } |
| |
| static const struct sdhci_ops sdhci_cdns_ops = { |
| .set_control_reg = sdhci_cdns_set_control_reg, |
| }; |
| |
| static int sdhci_cdns_set_tune_val(struct sdhci_cdns_plat *plat, |
| unsigned int val) |
| { |
| void __iomem *reg = plat->hrs_addr + SDHCI_CDNS_HRS06; |
| u32 tmp; |
| int i, ret; |
| |
| if (WARN_ON(!FIELD_FIT(SDHCI_CDNS_HRS06_TUNE, val))) |
| return -EINVAL; |
| |
| tmp = readl(reg); |
| tmp &= ~SDHCI_CDNS_HRS06_TUNE; |
| tmp |= FIELD_PREP(SDHCI_CDNS_HRS06_TUNE, val); |
| |
| /* |
| * Workaround for IP errata: |
| * The IP6116 SD/eMMC PHY design has a timing issue on receive data |
| * path. Send tune request twice. |
| */ |
| for (i = 0; i < 2; i++) { |
| tmp |= SDHCI_CDNS_HRS06_TUNE_UP; |
| writel(tmp, reg); |
| |
| ret = readl_poll_timeout(reg, tmp, |
| !(tmp & SDHCI_CDNS_HRS06_TUNE_UP), 1); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int __maybe_unused sdhci_cdns_execute_tuning(struct udevice *dev, |
| unsigned int opcode) |
| { |
| struct sdhci_cdns_plat *plat = dev_get_plat(dev); |
| struct mmc *mmc = &plat->mmc; |
| int cur_streak = 0; |
| int max_streak = 0; |
| int end_of_streak = 0; |
| int i; |
| |
| /* |
| * This handler only implements the eMMC tuning that is specific to |
| * this controller. The tuning for SD timing should be handled by the |
| * SDHCI core. |
| */ |
| if (!IS_MMC(mmc)) |
| return -ENOTSUPP; |
| |
| if (WARN_ON(opcode != MMC_CMD_SEND_TUNING_BLOCK_HS200)) |
| return -EINVAL; |
| |
| for (i = 0; i < SDHCI_CDNS_MAX_TUNING_LOOP; i++) { |
| if (sdhci_cdns_set_tune_val(plat, i) || |
| mmc_send_tuning(mmc, opcode, NULL)) { /* bad */ |
| cur_streak = 0; |
| } else { /* good */ |
| cur_streak++; |
| if (cur_streak > max_streak) { |
| max_streak = cur_streak; |
| end_of_streak = i; |
| } |
| } |
| } |
| |
| if (!max_streak) { |
| dev_err(dev, "no tuning point found\n"); |
| return -EIO; |
| } |
| |
| return sdhci_cdns_set_tune_val(plat, end_of_streak - max_streak / 2); |
| } |
| |
| static struct dm_mmc_ops sdhci_cdns_mmc_ops; |
| |
| static int sdhci_cdns_bind(struct udevice *dev) |
| { |
| struct sdhci_cdns_plat *plat = dev_get_plat(dev); |
| |
| return sdhci_bind(dev, &plat->mmc, &plat->cfg); |
| } |
| |
| static int sdhci_cdns_probe(struct udevice *dev) |
| { |
| DECLARE_GLOBAL_DATA_PTR; |
| struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev); |
| struct sdhci_cdns_plat *plat = dev_get_plat(dev); |
| struct sdhci_host *host = dev_get_priv(dev); |
| fdt_addr_t base; |
| int ret; |
| |
| base = dev_read_addr(dev); |
| if (base == FDT_ADDR_T_NONE) |
| return -EINVAL; |
| |
| plat->hrs_addr = devm_ioremap(dev, base, SZ_1K); |
| if (!plat->hrs_addr) |
| return -ENOMEM; |
| |
| host->name = dev->name; |
| host->ioaddr = plat->hrs_addr + SDHCI_CDNS_SRS_BASE; |
| host->ops = &sdhci_cdns_ops; |
| host->quirks |= SDHCI_QUIRK_WAIT_SEND_CMD; |
| sdhci_cdns_mmc_ops = sdhci_ops; |
| #ifdef MMC_SUPPORTS_TUNING |
| sdhci_cdns_mmc_ops.execute_tuning = sdhci_cdns_execute_tuning; |
| #endif |
| |
| ret = mmc_of_parse(dev, &plat->cfg); |
| if (ret) |
| return ret; |
| |
| ret = sdhci_cdns_phy_init(plat, gd->fdt_blob, dev_of_offset(dev)); |
| if (ret) |
| return ret; |
| |
| host->mmc = &plat->mmc; |
| host->mmc->dev = dev; |
| ret = sdhci_setup_cfg(&plat->cfg, host, 0, 0); |
| if (ret) |
| return ret; |
| |
| upriv->mmc = &plat->mmc; |
| host->mmc->priv = host; |
| |
| return sdhci_probe(dev); |
| } |
| |
| static const struct udevice_id sdhci_cdns_match[] = { |
| { .compatible = "socionext,uniphier-sd4hc" }, |
| { .compatible = "cdns,sd4hc" }, |
| { /* sentinel */ } |
| }; |
| |
| U_BOOT_DRIVER(sdhci_cdns) = { |
| .name = "sdhci-cdns", |
| .id = UCLASS_MMC, |
| .of_match = sdhci_cdns_match, |
| .bind = sdhci_cdns_bind, |
| .probe = sdhci_cdns_probe, |
| .priv_auto = sizeof(struct sdhci_host), |
| .plat_auto = sizeof(struct sdhci_cdns_plat), |
| .ops = &sdhci_cdns_mmc_ops, |
| }; |