| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Cadence USBSS DRD Driver - gadget side. |
| * |
| * Copyright (C) 2018 Cadence Design Systems. |
| * Copyright (C) 2017-2018 NXP |
| * |
| * Authors: Pawel Jez <pjez@cadence.com>, |
| * Pawel Laszczak <pawell@cadence.com> |
| * Peter Chen <peter.chen@nxp.com> |
| */ |
| |
| #include <cpu_func.h> |
| #include <dm.h> |
| #include <dm/device_compat.h> |
| #include <asm/cache.h> |
| #include <linux/bitops.h> |
| #include <linux/delay.h> |
| #include <linux/usb/composite.h> |
| #include <linux/iopoll.h> |
| |
| #include "gadget.h" |
| #include "trace.h" |
| |
| #define readl_poll_timeout_atomic readl_poll_timeout |
| #define usleep_range(a, b) udelay((b)) |
| |
| static struct usb_endpoint_descriptor cdns3_gadget_ep0_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| .bmAttributes = USB_ENDPOINT_XFER_CONTROL, |
| }; |
| |
| /** |
| * cdns3_ep0_run_transfer - Do transfer on default endpoint hardware |
| * @priv_dev: extended gadget object |
| * @dma_addr: physical address where data is/will be stored |
| * @length: data length |
| * @erdy: set it to 1 when ERDY packet should be sent - |
| * exit from flow control state |
| */ |
| static void cdns3_ep0_run_transfer(struct cdns3_device *priv_dev, |
| dma_addr_t dma_addr, |
| unsigned int length, int erdy, int zlp) |
| { |
| struct cdns3_usb_regs __iomem *regs = priv_dev->regs; |
| struct cdns3_endpoint *priv_ep = priv_dev->eps[0]; |
| |
| priv_ep->trb_pool[0].buffer = TRB_BUFFER(dma_addr); |
| priv_ep->trb_pool[0].length = TRB_LEN(length); |
| |
| if (zlp) { |
| priv_ep->trb_pool[0].control = TRB_CYCLE | TRB_TYPE(TRB_NORMAL); |
| priv_ep->trb_pool[1].buffer = TRB_BUFFER(dma_addr); |
| priv_ep->trb_pool[1].length = TRB_LEN(0); |
| priv_ep->trb_pool[1].control = TRB_CYCLE | TRB_IOC | |
| TRB_TYPE(TRB_NORMAL); |
| } else { |
| priv_ep->trb_pool[0].control = TRB_CYCLE | TRB_IOC | |
| TRB_TYPE(TRB_NORMAL); |
| priv_ep->trb_pool[1].control = 0; |
| } |
| |
| /* Flush both TRBs */ |
| flush_dcache_range((unsigned long)priv_ep->trb_pool, |
| (unsigned long)priv_ep->trb_pool + |
| ROUND(sizeof(struct cdns3_trb) * 2, |
| CONFIG_SYS_CACHELINE_SIZE)); |
| |
| trace_cdns3_prepare_trb(priv_ep, priv_ep->trb_pool); |
| |
| cdns3_select_ep(priv_dev, priv_dev->ep0_data_dir); |
| |
| writel(EP_STS_TRBERR, ®s->ep_sts); |
| writel(EP_TRADDR_TRADDR(priv_ep->trb_pool_dma), ®s->ep_traddr); |
| trace_cdns3_doorbell_ep0(priv_dev->ep0_data_dir ? "ep0in" : "ep0out", |
| readl(®s->ep_traddr)); |
| |
| /* TRB should be prepared before starting transfer. */ |
| writel(EP_CMD_DRDY, ®s->ep_cmd); |
| |
| /* Resume controller before arming transfer. */ |
| __cdns3_gadget_wakeup(priv_dev); |
| |
| if (erdy) |
| writel(EP_CMD_ERDY, &priv_dev->regs->ep_cmd); |
| } |
| |
| /** |
| * cdns3_ep0_delegate_req - Returns status of handling setup packet |
| * Setup is handled by gadget driver |
| * @priv_dev: extended gadget object |
| * @ctrl_req: pointer to received setup packet |
| * |
| * Returns zero on success or negative value on failure |
| */ |
| static int cdns3_ep0_delegate_req(struct cdns3_device *priv_dev, |
| struct usb_ctrlrequest *ctrl_req) |
| { |
| int ret; |
| |
| spin_unlock(&priv_dev->lock); |
| priv_dev->setup_pending = 1; |
| ret = priv_dev->gadget_driver->setup(&priv_dev->gadget, ctrl_req); |
| priv_dev->setup_pending = 0; |
| spin_lock(&priv_dev->lock); |
| return ret; |
| } |
| |
| static void cdns3_prepare_setup_packet(struct cdns3_device *priv_dev) |
| { |
| priv_dev->ep0_data_dir = 0; |
| priv_dev->ep0_stage = CDNS3_SETUP_STAGE; |
| cdns3_ep0_run_transfer(priv_dev, priv_dev->setup_dma, |
| sizeof(struct usb_ctrlrequest), 0, 0); |
| } |
| |
| static void cdns3_ep0_complete_setup(struct cdns3_device *priv_dev, |
| u8 send_stall, u8 send_erdy) |
| { |
| struct cdns3_endpoint *priv_ep = priv_dev->eps[0]; |
| struct usb_request *request; |
| |
| request = cdns3_next_request(&priv_ep->pending_req_list); |
| if (request) |
| list_del_init(&request->list); |
| |
| if (send_stall) { |
| trace_cdns3_halt(priv_ep, send_stall, 0); |
| /* set_stall on ep0 */ |
| cdns3_select_ep(priv_dev, 0x00); |
| writel(EP_CMD_SSTALL, &priv_dev->regs->ep_cmd); |
| } else { |
| cdns3_prepare_setup_packet(priv_dev); |
| } |
| |
| priv_dev->ep0_stage = CDNS3_SETUP_STAGE; |
| writel((send_erdy ? EP_CMD_ERDY : 0) | EP_CMD_REQ_CMPL, |
| &priv_dev->regs->ep_cmd); |
| |
| cdns3_allow_enable_l1(priv_dev, 1); |
| } |
| |
| /** |
| * cdns3_req_ep0_set_configuration - Handling of SET_CONFIG standard USB request |
| * @priv_dev: extended gadget object |
| * @ctrl_req: pointer to received setup packet |
| * |
| * Returns 0 if success, USB_GADGET_DELAYED_STATUS on deferred status stage, |
| * error code on error |
| */ |
| static int cdns3_req_ep0_set_configuration(struct cdns3_device *priv_dev, |
| struct usb_ctrlrequest *ctrl_req) |
| { |
| enum usb_device_state device_state = priv_dev->gadget.state; |
| struct cdns3_endpoint *priv_ep; |
| u32 config = le16_to_cpu(ctrl_req->wValue); |
| int result = 0; |
| int i; |
| |
| switch (device_state) { |
| case USB_STATE_ADDRESS: |
| /* Configure non-control EPs */ |
| for (i = 0; i < CDNS3_ENDPOINTS_MAX_COUNT; i++) { |
| priv_ep = priv_dev->eps[i]; |
| if (!priv_ep) |
| continue; |
| |
| if (priv_ep->flags & EP_CLAIMED) |
| cdns3_ep_config(priv_ep); |
| } |
| |
| result = cdns3_ep0_delegate_req(priv_dev, ctrl_req); |
| |
| if (result) |
| return result; |
| |
| if (config) { |
| cdns3_set_hw_configuration(priv_dev); |
| } else { |
| cdns3_hw_reset_eps_config(priv_dev); |
| usb_gadget_set_state(&priv_dev->gadget, |
| USB_STATE_ADDRESS); |
| } |
| break; |
| case USB_STATE_CONFIGURED: |
| result = cdns3_ep0_delegate_req(priv_dev, ctrl_req); |
| |
| if (!config && !result) { |
| cdns3_hw_reset_eps_config(priv_dev); |
| usb_gadget_set_state(&priv_dev->gadget, |
| USB_STATE_ADDRESS); |
| } |
| break; |
| default: |
| result = -EINVAL; |
| } |
| |
| return result; |
| } |
| |
| /** |
| * cdns3_req_ep0_set_address - Handling of SET_ADDRESS standard USB request |
| * @priv_dev: extended gadget object |
| * @ctrl_req: pointer to received setup packet |
| * |
| * Returns 0 if success, error code on error |
| */ |
| static int cdns3_req_ep0_set_address(struct cdns3_device *priv_dev, |
| struct usb_ctrlrequest *ctrl_req) |
| { |
| enum usb_device_state device_state = priv_dev->gadget.state; |
| u32 reg; |
| u32 addr; |
| |
| addr = le16_to_cpu(ctrl_req->wValue); |
| |
| if (addr > USB_DEVICE_MAX_ADDRESS) { |
| dev_err(priv_dev->dev, |
| "Device address (%d) cannot be greater than %d\n", |
| addr, USB_DEVICE_MAX_ADDRESS); |
| return -EINVAL; |
| } |
| |
| if (device_state == USB_STATE_CONFIGURED) { |
| dev_err(priv_dev->dev, |
| "can't set_address from configured state\n"); |
| return -EINVAL; |
| } |
| |
| reg = readl(&priv_dev->regs->usb_cmd); |
| |
| writel(reg | USB_CMD_FADDR(addr) | USB_CMD_SET_ADDR, |
| &priv_dev->regs->usb_cmd); |
| |
| usb_gadget_set_state(&priv_dev->gadget, |
| (addr ? USB_STATE_ADDRESS : USB_STATE_DEFAULT)); |
| |
| return 0; |
| } |
| |
| /** |
| * cdns3_req_ep0_get_status - Handling of GET_STATUS standard USB request |
| * @priv_dev: extended gadget object |
| * @ctrl_req: pointer to received setup packet |
| * |
| * Returns 0 if success, error code on error |
| */ |
| static int cdns3_req_ep0_get_status(struct cdns3_device *priv_dev, |
| struct usb_ctrlrequest *ctrl) |
| { |
| __le16 *response_pkt; |
| u16 usb_status = 0; |
| u32 recip; |
| |
| recip = ctrl->bRequestType & USB_RECIP_MASK; |
| |
| switch (recip) { |
| case USB_RECIP_DEVICE: |
| /* self powered */ |
| if (priv_dev->is_selfpowered) |
| usb_status = BIT(USB_DEVICE_SELF_POWERED); |
| |
| if (priv_dev->wake_up_flag) |
| usb_status |= BIT(USB_DEVICE_REMOTE_WAKEUP); |
| |
| if (priv_dev->gadget.speed != USB_SPEED_SUPER) |
| break; |
| |
| if (priv_dev->u1_allowed) |
| usb_status |= BIT(USB_DEV_STAT_U1_ENABLED); |
| |
| if (priv_dev->u2_allowed) |
| usb_status |= BIT(USB_DEV_STAT_U2_ENABLED); |
| |
| break; |
| case USB_RECIP_INTERFACE: |
| return cdns3_ep0_delegate_req(priv_dev, ctrl); |
| case USB_RECIP_ENDPOINT: |
| /* check if endpoint is stalled */ |
| cdns3_select_ep(priv_dev, ctrl->wIndex); |
| if (EP_STS_STALL(readl(&priv_dev->regs->ep_sts))) |
| usb_status = BIT(USB_ENDPOINT_HALT); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| response_pkt = (__le16 *)priv_dev->setup_buf; |
| *response_pkt = cpu_to_le16(usb_status); |
| |
| /* Flush setup response */ |
| flush_dcache_range((unsigned long)priv_dev->setup_buf, |
| (unsigned long)priv_dev->setup_buf + |
| ROUND(sizeof(struct usb_ctrlrequest), |
| CONFIG_SYS_CACHELINE_SIZE)); |
| |
| cdns3_ep0_run_transfer(priv_dev, priv_dev->setup_dma, |
| sizeof(*response_pkt), 1, 0); |
| return 0; |
| } |
| |
| static int cdns3_ep0_feature_handle_device(struct cdns3_device *priv_dev, |
| struct usb_ctrlrequest *ctrl, |
| int set) |
| { |
| enum usb_device_state state; |
| enum usb_device_speed speed; |
| int ret = 0; |
| u16 tmode; |
| |
| state = priv_dev->gadget.state; |
| speed = priv_dev->gadget.speed; |
| |
| switch (ctrl->wValue) { |
| case USB_DEVICE_REMOTE_WAKEUP: |
| priv_dev->wake_up_flag = !!set; |
| break; |
| case USB_DEVICE_U1_ENABLE: |
| if (state != USB_STATE_CONFIGURED || speed != USB_SPEED_SUPER) |
| return -EINVAL; |
| |
| priv_dev->u1_allowed = !!set; |
| break; |
| case USB_DEVICE_U2_ENABLE: |
| if (state != USB_STATE_CONFIGURED || speed != USB_SPEED_SUPER) |
| return -EINVAL; |
| |
| priv_dev->u2_allowed = !!set; |
| break; |
| case USB_DEVICE_LTM_ENABLE: |
| ret = -EINVAL; |
| break; |
| case USB_DEVICE_TEST_MODE: |
| if (state != USB_STATE_CONFIGURED || speed > USB_SPEED_HIGH) |
| return -EINVAL; |
| |
| tmode = le16_to_cpu(ctrl->wIndex); |
| |
| if (!set || (tmode & 0xff) != 0) |
| return -EINVAL; |
| |
| switch (tmode >> 8) { |
| case TEST_J: |
| case TEST_K: |
| case TEST_SE0_NAK: |
| case TEST_PACKET: |
| cdns3_ep0_complete_setup(priv_dev, 0, 1); |
| /** |
| * Little delay to give the controller some time |
| * for sending status stage. |
| * This time should be less then 3ms. |
| */ |
| usleep_range(1000, 2000); |
| cdns3_set_register_bit(&priv_dev->regs->usb_cmd, |
| USB_CMD_STMODE | |
| USB_STS_TMODE_SEL(tmode - 1)); |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| static int cdns3_ep0_feature_handle_intf(struct cdns3_device *priv_dev, |
| struct usb_ctrlrequest *ctrl, |
| int set) |
| { |
| u32 wValue; |
| int ret = 0; |
| |
| wValue = le16_to_cpu(ctrl->wValue); |
| |
| switch (wValue) { |
| case USB_INTRF_FUNC_SUSPEND: |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| static int cdns3_ep0_feature_handle_endpoint(struct cdns3_device *priv_dev, |
| struct usb_ctrlrequest *ctrl, |
| int set) |
| { |
| struct cdns3_endpoint *priv_ep; |
| int ret = 0; |
| u8 index; |
| |
| if (le16_to_cpu(ctrl->wValue) != USB_ENDPOINT_HALT) |
| return -EINVAL; |
| |
| if (!(ctrl->wIndex & ~USB_DIR_IN)) |
| return 0; |
| |
| index = cdns3_ep_addr_to_index(ctrl->wIndex); |
| priv_ep = priv_dev->eps[index]; |
| |
| cdns3_select_ep(priv_dev, ctrl->wIndex); |
| |
| if (set) |
| __cdns3_gadget_ep_set_halt(priv_ep); |
| else if (!(priv_ep->flags & EP_WEDGE)) |
| ret = __cdns3_gadget_ep_clear_halt(priv_ep); |
| |
| cdns3_select_ep(priv_dev, 0x00); |
| |
| return ret; |
| } |
| |
| /** |
| * cdns3_req_ep0_handle_feature - |
| * Handling of GET/SET_FEATURE standard USB request |
| * |
| * @priv_dev: extended gadget object |
| * @ctrl_req: pointer to received setup packet |
| * @set: must be set to 1 for SET_FEATURE request |
| * |
| * Returns 0 if success, error code on error |
| */ |
| static int cdns3_req_ep0_handle_feature(struct cdns3_device *priv_dev, |
| struct usb_ctrlrequest *ctrl, |
| int set) |
| { |
| int ret = 0; |
| u32 recip; |
| |
| recip = ctrl->bRequestType & USB_RECIP_MASK; |
| |
| switch (recip) { |
| case USB_RECIP_DEVICE: |
| ret = cdns3_ep0_feature_handle_device(priv_dev, ctrl, set); |
| break; |
| case USB_RECIP_INTERFACE: |
| ret = cdns3_ep0_feature_handle_intf(priv_dev, ctrl, set); |
| break; |
| case USB_RECIP_ENDPOINT: |
| ret = cdns3_ep0_feature_handle_endpoint(priv_dev, ctrl, set); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| /** |
| * cdns3_req_ep0_set_sel - Handling of SET_SEL standard USB request |
| * @priv_dev: extended gadget object |
| * @ctrl_req: pointer to received setup packet |
| * |
| * Returns 0 if success, error code on error |
| */ |
| static int cdns3_req_ep0_set_sel(struct cdns3_device *priv_dev, |
| struct usb_ctrlrequest *ctrl_req) |
| { |
| if (priv_dev->gadget.state < USB_STATE_ADDRESS) |
| return -EINVAL; |
| |
| if (ctrl_req->wLength != 6) { |
| dev_err(priv_dev->dev, "Set SEL should be 6 bytes, got %d\n", |
| ctrl_req->wLength); |
| return -EINVAL; |
| } |
| |
| cdns3_ep0_run_transfer(priv_dev, priv_dev->setup_dma, 6, 1, 0); |
| return 0; |
| } |
| |
| /** |
| * cdns3_req_ep0_set_isoch_delay - |
| * Handling of GET_ISOCH_DELAY standard USB request |
| * @priv_dev: extended gadget object |
| * @ctrl_req: pointer to received setup packet |
| * |
| * Returns 0 if success, error code on error |
| */ |
| static int cdns3_req_ep0_set_isoch_delay(struct cdns3_device *priv_dev, |
| struct usb_ctrlrequest *ctrl_req) |
| { |
| if (ctrl_req->wIndex || ctrl_req->wLength) |
| return -EINVAL; |
| |
| priv_dev->isoch_delay = ctrl_req->wValue; |
| |
| return 0; |
| } |
| |
| /** |
| * cdns3_ep0_standard_request - Handling standard USB requests |
| * @priv_dev: extended gadget object |
| * @ctrl_req: pointer to received setup packet |
| * |
| * Returns 0 if success, error code on error |
| */ |
| static int cdns3_ep0_standard_request(struct cdns3_device *priv_dev, |
| struct usb_ctrlrequest *ctrl_req) |
| { |
| int ret; |
| |
| switch (ctrl_req->bRequest) { |
| case USB_REQ_SET_ADDRESS: |
| ret = cdns3_req_ep0_set_address(priv_dev, ctrl_req); |
| break; |
| case USB_REQ_SET_CONFIGURATION: |
| ret = cdns3_req_ep0_set_configuration(priv_dev, ctrl_req); |
| break; |
| case USB_REQ_GET_STATUS: |
| ret = cdns3_req_ep0_get_status(priv_dev, ctrl_req); |
| break; |
| case USB_REQ_CLEAR_FEATURE: |
| ret = cdns3_req_ep0_handle_feature(priv_dev, ctrl_req, 0); |
| break; |
| case USB_REQ_SET_FEATURE: |
| ret = cdns3_req_ep0_handle_feature(priv_dev, ctrl_req, 1); |
| break; |
| case USB_REQ_SET_SEL: |
| ret = cdns3_req_ep0_set_sel(priv_dev, ctrl_req); |
| break; |
| case USB_REQ_SET_ISOCH_DELAY: |
| ret = cdns3_req_ep0_set_isoch_delay(priv_dev, ctrl_req); |
| break; |
| default: |
| ret = cdns3_ep0_delegate_req(priv_dev, ctrl_req); |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static void __pending_setup_status_handler(struct cdns3_device *priv_dev) |
| { |
| struct usb_request *request = priv_dev->pending_status_request; |
| |
| if (priv_dev->status_completion_no_call && request && |
| request->complete) { |
| request->complete(&priv_dev->eps[0]->endpoint, request); |
| priv_dev->status_completion_no_call = 0; |
| } |
| } |
| |
| void cdns3_pending_setup_status_handler(struct work_struct *work) |
| { |
| struct cdns3_device *priv_dev = container_of(work, struct cdns3_device, |
| pending_status_wq); |
| unsigned long flags; |
| |
| spin_lock_irqsave(&priv_dev->lock, flags); |
| __pending_setup_status_handler(priv_dev); |
| spin_unlock_irqrestore(&priv_dev->lock, flags); |
| } |
| |
| /** |
| * cdns3_ep0_setup_phase - Handling setup USB requests |
| * @priv_dev: extended gadget object |
| */ |
| static void cdns3_ep0_setup_phase(struct cdns3_device *priv_dev) |
| { |
| struct usb_ctrlrequest *ctrl = priv_dev->setup_buf; |
| struct cdns3_endpoint *priv_ep = priv_dev->eps[0]; |
| int result; |
| |
| /* Invalidate Setup Packet received */ |
| invalidate_dcache_range(priv_dev->setup_dma, |
| priv_dev->setup_dma + ARCH_DMA_MINALIGN); |
| |
| priv_dev->ep0_data_dir = ctrl->bRequestType & USB_DIR_IN; |
| |
| trace_cdns3_ctrl_req(ctrl); |
| |
| if (!list_empty(&priv_ep->pending_req_list)) { |
| struct usb_request *request; |
| |
| request = cdns3_next_request(&priv_ep->pending_req_list); |
| priv_ep->dir = priv_dev->ep0_data_dir; |
| cdns3_gadget_giveback(priv_ep, to_cdns3_request(request), |
| -ECONNRESET); |
| } |
| |
| if (le16_to_cpu(ctrl->wLength)) |
| priv_dev->ep0_stage = CDNS3_DATA_STAGE; |
| else |
| priv_dev->ep0_stage = CDNS3_STATUS_STAGE; |
| |
| if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) |
| result = cdns3_ep0_standard_request(priv_dev, ctrl); |
| else |
| result = cdns3_ep0_delegate_req(priv_dev, ctrl); |
| |
| if (result == USB_GADGET_DELAYED_STATUS) |
| return; |
| |
| if (result < 0) |
| cdns3_ep0_complete_setup(priv_dev, 1, 1); |
| else if (priv_dev->ep0_stage == CDNS3_STATUS_STAGE) |
| cdns3_ep0_complete_setup(priv_dev, 0, 1); |
| } |
| |
| static void cdns3_transfer_completed(struct cdns3_device *priv_dev) |
| { |
| struct cdns3_endpoint *priv_ep = priv_dev->eps[0]; |
| |
| if (!list_empty(&priv_ep->pending_req_list)) { |
| struct usb_request *request; |
| |
| trace_cdns3_complete_trb(priv_ep, priv_ep->trb_pool); |
| request = cdns3_next_request(&priv_ep->pending_req_list); |
| |
| /* Invalidate TRB before accessing it */ |
| invalidate_dcache_range((unsigned long)priv_ep->trb_pool, |
| (unsigned long)priv_ep->trb_pool + |
| ROUND(sizeof(struct cdns3_trb), |
| CONFIG_SYS_CACHELINE_SIZE)); |
| |
| request->actual = |
| TRB_LEN(le32_to_cpu(priv_ep->trb_pool->length)); |
| |
| priv_ep->dir = priv_dev->ep0_data_dir; |
| cdns3_gadget_giveback(priv_ep, to_cdns3_request(request), 0); |
| } |
| |
| cdns3_ep0_complete_setup(priv_dev, 0, 0); |
| } |
| |
| /** |
| * cdns3_check_new_setup - Check if controller receive new SETUP packet. |
| * @priv_dev: extended gadget object |
| * |
| * The SETUP packet can be kept in on-chip memory or in system memory. |
| */ |
| static bool cdns3_check_new_setup(struct cdns3_device *priv_dev) |
| { |
| u32 ep_sts_reg; |
| |
| cdns3_select_ep(priv_dev, 0 | USB_DIR_OUT); |
| ep_sts_reg = readl(&priv_dev->regs->ep_sts); |
| |
| return !!(ep_sts_reg & (EP_STS_SETUP | EP_STS_STPWAIT)); |
| } |
| |
| /** |
| * cdns3_check_ep0_interrupt_proceed - Processes interrupt related to endpoint 0 |
| * @priv_dev: extended gadget object |
| * @dir: USB_DIR_IN for IN direction, USB_DIR_OUT for OUT direction |
| */ |
| void cdns3_check_ep0_interrupt_proceed(struct cdns3_device *priv_dev, int dir) |
| { |
| u32 ep_sts_reg; |
| |
| cdns3_select_ep(priv_dev, dir); |
| |
| ep_sts_reg = readl(&priv_dev->regs->ep_sts); |
| writel(ep_sts_reg, &priv_dev->regs->ep_sts); |
| |
| trace_cdns3_ep0_irq(priv_dev, ep_sts_reg); |
| |
| __pending_setup_status_handler(priv_dev); |
| |
| if (ep_sts_reg & EP_STS_SETUP) |
| priv_dev->wait_for_setup = 1; |
| |
| if (priv_dev->wait_for_setup && ep_sts_reg & EP_STS_IOC) { |
| priv_dev->wait_for_setup = 0; |
| cdns3_allow_enable_l1(priv_dev, 0); |
| cdns3_ep0_setup_phase(priv_dev); |
| } else if ((ep_sts_reg & EP_STS_IOC) || (ep_sts_reg & EP_STS_ISP)) { |
| priv_dev->ep0_data_dir = dir; |
| cdns3_transfer_completed(priv_dev); |
| } |
| |
| if (ep_sts_reg & EP_STS_DESCMIS) { |
| if (dir == 0 && !priv_dev->setup_pending) |
| cdns3_prepare_setup_packet(priv_dev); |
| } |
| } |
| |
| /** |
| * cdns3_gadget_ep0_enable |
| * Function shouldn't be called by gadget driver, |
| * endpoint 0 is allways active |
| */ |
| static int cdns3_gadget_ep0_enable(struct usb_ep *ep, |
| const struct usb_endpoint_descriptor *desc) |
| { |
| return -EINVAL; |
| } |
| |
| /** |
| * cdns3_gadget_ep0_disable |
| * Function shouldn't be called by gadget driver, |
| * endpoint 0 is allways active |
| */ |
| static int cdns3_gadget_ep0_disable(struct usb_ep *ep) |
| { |
| return -EINVAL; |
| } |
| |
| /** |
| * cdns3_gadget_ep0_set_halt |
| * @ep: pointer to endpoint zero object |
| * @value: 1 for set stall, 0 for clear stall |
| * |
| * Returns 0 |
| */ |
| static int cdns3_gadget_ep0_set_halt(struct usb_ep *ep, int value) |
| { |
| /* TODO */ |
| return 0; |
| } |
| |
| /** |
| * cdns3_gadget_ep0_queue Transfer data on endpoint zero |
| * @ep: pointer to endpoint zero object |
| * @request: pointer to request object |
| * @gfp_flags: gfp flags |
| * |
| * Returns 0 on success, error code elsewhere |
| */ |
| static int cdns3_gadget_ep0_queue(struct usb_ep *ep, |
| struct usb_request *request, |
| gfp_t gfp_flags) |
| { |
| struct cdns3_endpoint *priv_ep = ep_to_cdns3_ep(ep); |
| struct cdns3_device *priv_dev = priv_ep->cdns3_dev; |
| unsigned long flags; |
| int erdy_sent = 0; |
| int ret = 0; |
| u8 zlp = 0; |
| |
| trace_cdns3_ep0_queue(priv_dev, request); |
| |
| /* cancel the request if controller receive new SETUP packet. */ |
| if (cdns3_check_new_setup(priv_dev)) |
| return -ECONNRESET; |
| |
| /* send STATUS stage. Should be called only for SET_CONFIGURATION */ |
| if (priv_dev->ep0_stage == CDNS3_STATUS_STAGE) { |
| spin_lock_irqsave(&priv_dev->lock, flags); |
| cdns3_select_ep(priv_dev, 0x00); |
| |
| erdy_sent = !priv_dev->hw_configured_flag; |
| cdns3_set_hw_configuration(priv_dev); |
| |
| if (!erdy_sent) |
| cdns3_ep0_complete_setup(priv_dev, 0, 1); |
| |
| cdns3_allow_enable_l1(priv_dev, 1); |
| |
| request->actual = 0; |
| priv_dev->status_completion_no_call = true; |
| priv_dev->pending_status_request = request; |
| spin_unlock_irqrestore(&priv_dev->lock, flags); |
| |
| /* |
| * Since there is no completion interrupt for status stage, |
| * it needs to call ->completion in software after |
| * ep0_queue is back. |
| */ |
| #ifndef __UBOOT__ |
| queue_work(system_freezable_wq, &priv_dev->pending_status_wq); |
| #else |
| __pending_setup_status_handler(priv_dev); |
| #endif |
| return 0; |
| } |
| |
| spin_lock_irqsave(&priv_dev->lock, flags); |
| if (!list_empty(&priv_ep->pending_req_list)) { |
| dev_err(priv_dev->dev, |
| "can't handle multiple requests for ep0\n"); |
| spin_unlock_irqrestore(&priv_dev->lock, flags); |
| return -EBUSY; |
| } |
| |
| ret = usb_gadget_map_request(&priv_dev->gadget, request, |
| priv_dev->ep0_data_dir); |
| if (ret) { |
| spin_unlock_irqrestore(&priv_dev->lock, flags); |
| dev_err(priv_dev->dev, "failed to map request\n"); |
| return -EINVAL; |
| } |
| |
| request->status = -EINPROGRESS; |
| list_add_tail(&request->list, &priv_ep->pending_req_list); |
| |
| if (request->zero && request->length && |
| (request->length % ep->maxpacket == 0)) |
| zlp = 1; |
| |
| cdns3_ep0_run_transfer(priv_dev, request->dma, request->length, 1, zlp); |
| |
| spin_unlock_irqrestore(&priv_dev->lock, flags); |
| |
| return ret; |
| } |
| |
| /** |
| * cdns3_gadget_ep_set_wedge Set wedge on selected endpoint |
| * @ep: endpoint object |
| * |
| * Returns 0 |
| */ |
| int cdns3_gadget_ep_set_wedge(struct usb_ep *ep) |
| { |
| struct cdns3_endpoint *priv_ep = ep_to_cdns3_ep(ep); |
| |
| dev_dbg(priv_ep->cdns3_dev->dev, "Wedge for %s\n", ep->name); |
| cdns3_gadget_ep_set_halt(ep, 1); |
| priv_ep->flags |= EP_WEDGE; |
| |
| return 0; |
| } |
| |
| const struct usb_ep_ops cdns3_gadget_ep0_ops = { |
| .enable = cdns3_gadget_ep0_enable, |
| .disable = cdns3_gadget_ep0_disable, |
| .alloc_request = cdns3_gadget_ep_alloc_request, |
| .free_request = cdns3_gadget_ep_free_request, |
| .queue = cdns3_gadget_ep0_queue, |
| .dequeue = cdns3_gadget_ep_dequeue, |
| .set_halt = cdns3_gadget_ep0_set_halt, |
| .set_wedge = cdns3_gadget_ep_set_wedge, |
| }; |
| |
| /** |
| * cdns3_ep0_config - Configures default endpoint |
| * @priv_dev: extended gadget object |
| * |
| * Functions sets parameters: maximal packet size and enables interrupts |
| */ |
| void cdns3_ep0_config(struct cdns3_device *priv_dev) |
| { |
| struct cdns3_usb_regs __iomem *regs; |
| struct cdns3_endpoint *priv_ep; |
| u32 max_packet_size = 64; |
| |
| regs = priv_dev->regs; |
| |
| if (priv_dev->gadget.speed == USB_SPEED_SUPER) |
| max_packet_size = 512; |
| |
| priv_ep = priv_dev->eps[0]; |
| |
| if (!list_empty(&priv_ep->pending_req_list)) { |
| struct usb_request *request; |
| |
| request = cdns3_next_request(&priv_ep->pending_req_list); |
| list_del_init(&request->list); |
| } |
| |
| priv_dev->u1_allowed = 0; |
| priv_dev->u2_allowed = 0; |
| |
| priv_dev->gadget.ep0->maxpacket = max_packet_size; |
| cdns3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(max_packet_size); |
| |
| /* init ep out */ |
| cdns3_select_ep(priv_dev, USB_DIR_OUT); |
| |
| if (priv_dev->dev_ver >= DEV_VER_V3) { |
| cdns3_set_register_bit(&priv_dev->regs->dtrans, |
| BIT(0) | BIT(16)); |
| cdns3_set_register_bit(&priv_dev->regs->tdl_from_trb, |
| BIT(0) | BIT(16)); |
| } |
| |
| writel(EP_CFG_ENABLE | EP_CFG_MAXPKTSIZE(max_packet_size), |
| ®s->ep_cfg); |
| |
| writel(EP_STS_EN_SETUPEN | EP_STS_EN_DESCMISEN | EP_STS_EN_TRBERREN, |
| ®s->ep_sts_en); |
| |
| /* init ep in */ |
| cdns3_select_ep(priv_dev, USB_DIR_IN); |
| |
| writel(EP_CFG_ENABLE | EP_CFG_MAXPKTSIZE(max_packet_size), |
| ®s->ep_cfg); |
| |
| writel(EP_STS_EN_SETUPEN | EP_STS_EN_TRBERREN, ®s->ep_sts_en); |
| |
| cdns3_set_register_bit(®s->usb_conf, USB_CONF_U1DS | USB_CONF_U2DS); |
| } |
| |
| /** |
| * cdns3_init_ep0 Initializes software endpoint 0 of gadget |
| * @priv_dev: extended gadget object |
| * @ep_priv: extended endpoint object |
| * |
| * Returns 0 on success else error code. |
| */ |
| int cdns3_init_ep0(struct cdns3_device *priv_dev, |
| struct cdns3_endpoint *priv_ep) |
| { |
| sprintf(priv_ep->name, "ep0"); |
| |
| /* fill linux fields */ |
| priv_ep->endpoint.ops = &cdns3_gadget_ep0_ops; |
| priv_ep->endpoint.maxburst = 1; |
| usb_ep_set_maxpacket_limit(&priv_ep->endpoint, |
| CDNS3_EP0_MAX_PACKET_LIMIT); |
| #ifndef __UBOOT__ |
| priv_ep->endpoint.address = 0; |
| #endif |
| priv_ep->endpoint.caps.type_control = 1; |
| priv_ep->endpoint.caps.dir_in = 1; |
| priv_ep->endpoint.caps.dir_out = 1; |
| priv_ep->endpoint.name = priv_ep->name; |
| priv_ep->endpoint.desc = &cdns3_gadget_ep0_desc; |
| priv_dev->gadget.ep0 = &priv_ep->endpoint; |
| priv_ep->type = USB_ENDPOINT_XFER_CONTROL; |
| |
| return cdns3_allocate_trb_pool(priv_ep); |
| } |