| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright 2018 NXP |
| * |
| * Peng Fan <peng.fan@nxp.com> |
| */ |
| |
| |
| #include "imagetool.h" |
| #include <image.h> |
| #include "imximage.h" |
| #include "compiler.h" |
| |
| static uint32_t ap_start_addr, sld_start_addr, sld_src_off; |
| static char *ap_img, *sld_img, *signed_hdmi; |
| static imx_header_v3_t imx_header[2]; /* At most there are 3 IVT headers */ |
| static uint32_t rom_image_offset; |
| static uint32_t sector_size = 0x200; |
| static uint32_t image_off; |
| static uint32_t sld_header_off; |
| static uint32_t ivt_offset; |
| static uint32_t using_fit; |
| |
| #define ROM_V1 1 |
| #define ROM_V2 2 |
| |
| static uint32_t rom_version = ROM_V1; |
| |
| #define CSF_SIZE 0x2000 |
| #define HDMI_IVT_ID 0 |
| #define IMAGE_IVT_ID 1 |
| |
| #define HDMI_FW_SIZE 0x17000 /* Use Last 0x1000 for IVT and CSF */ |
| #define ALIGN_SIZE 0x1000 |
| |
| static uint32_t get_cfg_value(char *token, char *name, int linenr) |
| { |
| char *endptr; |
| uint32_t value; |
| |
| errno = 0; |
| value = strtoul(token, &endptr, 16); |
| if (errno || token == endptr) { |
| fprintf(stderr, "Error: %s[%d] - Invalid hex data(%s)\n", |
| name, linenr, token); |
| exit(EXIT_FAILURE); |
| } |
| return value; |
| } |
| |
| int imx8mimage_check_params(struct image_tool_params *params) |
| { |
| return 0; |
| } |
| |
| static void imx8mimage_set_header(void *ptr, struct stat *sbuf, int ifd, |
| struct image_tool_params *params) |
| { |
| } |
| |
| static void imx8mimage_print_header(const void *ptr) |
| { |
| } |
| |
| static int imx8mimage_check_image_types(uint8_t type) |
| { |
| return (type == IH_TYPE_IMX8MIMAGE) ? EXIT_SUCCESS : EXIT_FAILURE; |
| } |
| |
| static table_entry_t imx8mimage_cmds[] = { |
| {CMD_BOOT_FROM, "BOOT_FROM", "boot command", }, |
| {CMD_FIT, "FIT", "fit image", }, |
| {CMD_SIGNED_HDMI, "SIGNED_HDMI", "signed hdmi image", }, |
| {CMD_LOADER, "LOADER", "loader image", }, |
| {CMD_SECOND_LOADER, "SECOND_LOADER", "2nd loader image", }, |
| {CMD_DDR_FW, "DDR_FW", "ddr firmware", }, |
| {CMD_ROM_VERSION, "ROM_VERSION", "rom version", }, |
| {-1, "", "", }, |
| }; |
| |
| static table_entry_t imx8mimage_ivt_offset[] = { |
| {0x400, "sd", "sd/emmc",}, |
| {0x400, "emmc_fastboot", "emmc fastboot",}, |
| {0x1000, "fspi", "flexspi", }, |
| {-1, "", "Invalid", }, |
| }; |
| |
| static void parse_cfg_cmd(int32_t cmd, char *token, char *name, int lineno) |
| { |
| switch (cmd) { |
| case CMD_BOOT_FROM: |
| ivt_offset = get_table_entry_id(imx8mimage_ivt_offset, |
| "imx8mimage ivt offset", |
| token); |
| if (!strncmp(token, "sd", 2)) |
| rom_image_offset = 0x8000; |
| |
| if (rom_version == ROM_V2) |
| ivt_offset = 0; |
| break; |
| case CMD_LOADER: |
| ap_img = token; |
| break; |
| case CMD_SECOND_LOADER: |
| sld_img = token; |
| break; |
| case CMD_SIGNED_HDMI: |
| signed_hdmi = token; |
| break; |
| case CMD_DDR_FW: |
| /* Do nothing */ |
| break; |
| case CMD_ROM_VERSION: |
| if (!strncmp(token, "v2", 2)) { |
| rom_version = ROM_V2; |
| ivt_offset = 0; |
| } else if (!strncmp(token, "v1", 2)) { |
| rom_version = ROM_V1; |
| } |
| break; |
| |
| } |
| } |
| |
| static void parse_cfg_fld(int32_t *cmd, char *token, |
| char *name, int lineno, int fld) |
| { |
| switch (fld) { |
| case CFG_COMMAND: |
| *cmd = get_table_entry_id(imx8mimage_cmds, |
| "imx8mimage commands", token); |
| if (*cmd < 0) { |
| fprintf(stderr, "Error: %s[%d] - Invalid command" "(%s)\n", |
| name, lineno, token); |
| exit(EXIT_FAILURE); |
| } |
| switch (*cmd) { |
| case CMD_FIT: |
| using_fit = 1; |
| break; |
| } |
| break; |
| case CFG_REG_SIZE: |
| parse_cfg_cmd(*cmd, token, name, lineno); |
| break; |
| case CFG_REG_ADDRESS: |
| switch (*cmd) { |
| case CMD_LOADER: |
| ap_start_addr = get_cfg_value(token, name, lineno); |
| break; |
| case CMD_SECOND_LOADER: |
| sld_start_addr = get_cfg_value(token, name, lineno); |
| break; |
| } |
| break; |
| case CFG_REG_VALUE: |
| switch (*cmd) { |
| case CMD_SECOND_LOADER: |
| sld_src_off = get_cfg_value(token, name, lineno); |
| break; |
| } |
| default: |
| break; |
| } |
| } |
| |
| static uint32_t parse_cfg_file(char *name) |
| { |
| FILE *fd = NULL; |
| char *line = NULL; |
| char *token, *saveptr1, *saveptr2; |
| int lineno = 0; |
| int fld; |
| size_t len; |
| int32_t cmd; |
| |
| fd = fopen(name, "r"); |
| if (fd == 0) { |
| fprintf(stderr, "Error: %s - Can't open cfg file\n", name); |
| exit(EXIT_FAILURE); |
| } |
| |
| /* |
| * Very simple parsing, line starting with # are comments |
| * and are dropped |
| */ |
| while ((getline(&line, &len, fd)) > 0) { |
| lineno++; |
| |
| token = strtok_r(line, "\r\n", &saveptr1); |
| if (!token) |
| continue; |
| |
| /* Check inside the single line */ |
| for (fld = CFG_COMMAND, cmd = CFG_INVALID, |
| line = token; ; line = NULL, fld++) { |
| token = strtok_r(line, " \t", &saveptr2); |
| if (!token) |
| break; |
| |
| /* Drop all text starting with '#' as comments */ |
| if (token[0] == '#') |
| break; |
| |
| parse_cfg_fld(&cmd, token, name, lineno, fld); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static void fill_zero(int ifd, int size, int offset) |
| { |
| int fill_size; |
| uint8_t zeros[4096]; |
| int ret; |
| |
| memset(zeros, 0, sizeof(zeros)); |
| |
| ret = lseek(ifd, offset, SEEK_SET); |
| if (ret < 0) { |
| fprintf(stderr, "%s seek: %s\n", __func__, strerror(errno)); |
| exit(EXIT_FAILURE); |
| } |
| |
| while (size) { |
| if (size > 4096) |
| fill_size = 4096; |
| else |
| fill_size = size; |
| |
| if (write(ifd, (char *)&zeros, fill_size) != fill_size) { |
| fprintf(stderr, "Write error: %s\n", |
| strerror(errno)); |
| exit(EXIT_FAILURE); |
| } |
| |
| size -= fill_size; |
| }; |
| } |
| |
| static void copy_file(int ifd, const char *datafile, int pad, int offset, |
| int datafile_offset) |
| { |
| int dfd; |
| struct stat sbuf; |
| unsigned char *ptr; |
| int tail; |
| int zero = 0; |
| uint8_t zeros[4096]; |
| int size, ret; |
| |
| memset(zeros, 0, sizeof(zeros)); |
| |
| dfd = open(datafile, O_RDONLY | O_BINARY); |
| if (dfd < 0) { |
| fprintf(stderr, "Can't open %s: %s\n", |
| datafile, strerror(errno)); |
| exit(EXIT_FAILURE); |
| } |
| |
| if (fstat(dfd, &sbuf) < 0) { |
| fprintf(stderr, "Can't stat %s: %s\n", |
| datafile, strerror(errno)); |
| exit(EXIT_FAILURE); |
| } |
| |
| ptr = mmap(0, sbuf.st_size, PROT_READ, MAP_SHARED, dfd, 0); |
| if (ptr == MAP_FAILED) { |
| fprintf(stderr, "Can't read %s: %s\n", |
| datafile, strerror(errno)); |
| exit(EXIT_FAILURE); |
| } |
| |
| size = sbuf.st_size - datafile_offset; |
| ret = lseek(ifd, offset, SEEK_SET); |
| if (ret < 0) { |
| fprintf(stderr, "lseek ifd fail\n"); |
| exit(EXIT_FAILURE); |
| } |
| |
| if (write(ifd, ptr + datafile_offset, size) != size) { |
| fprintf(stderr, "Write error %s\n", |
| strerror(errno)); |
| exit(EXIT_FAILURE); |
| } |
| |
| tail = size % 4; |
| pad = pad - size; |
| if (pad == 1 && tail != 0) { |
| if (write(ifd, (char *)&zero, 4 - tail) != 4 - tail) { |
| fprintf(stderr, "Write error on %s\n", |
| strerror(errno)); |
| exit(EXIT_FAILURE); |
| } |
| } else if (pad > 1) { |
| while (pad > 0) { |
| int todo = sizeof(zeros); |
| |
| if (todo > pad) |
| todo = pad; |
| if (write(ifd, (char *)&zeros, todo) != todo) { |
| fprintf(stderr, "Write error: %s\n", |
| strerror(errno)); |
| exit(EXIT_FAILURE); |
| } |
| pad -= todo; |
| } |
| } |
| |
| munmap((void *)ptr, sbuf.st_size); |
| close(dfd); |
| } |
| |
| /* Return this IVT offset in the final output file */ |
| static int generate_ivt_for_fit(int fd, int fit_offset, uint32_t ep, |
| uint32_t *fit_load_addr) |
| { |
| image_header_t image_header; |
| int ret; |
| |
| uint32_t fit_size, load_addr; |
| int align_len = 64 - 1; /* 64 is cacheline size */ |
| |
| ret = lseek(fd, fit_offset, SEEK_SET); |
| if (ret < 0) { |
| fprintf(stderr, "lseek fd fail for fit\n"); |
| exit(EXIT_FAILURE); |
| } |
| |
| if (read(fd, (char *)&image_header, sizeof(image_header_t)) != |
| sizeof(image_header_t)) { |
| fprintf(stderr, "generate_ivt_for_fit read failed: %s\n", |
| strerror(errno)); |
| exit(EXIT_FAILURE); |
| } |
| |
| if (be32_to_cpu(image_header.ih_magic) != FDT_MAGIC) { |
| fprintf(stderr, "%s error: not a FIT file\n", __func__); |
| exit(EXIT_FAILURE); |
| } |
| |
| fit_size = fdt_totalsize(&image_header); |
| |
| fit_size = ALIGN(fit_size, ALIGN_SIZE); |
| |
| ret = lseek(fd, fit_offset + fit_size, SEEK_SET); |
| if (ret < 0) { |
| fprintf(stderr, "lseek fd fail for fit\n"); |
| exit(EXIT_FAILURE); |
| } |
| |
| /* |
| * ep is the u-boot entry. SPL loads the FIT before the u-boot |
| * address. 0x2000 is for CSF_SIZE |
| */ |
| load_addr = (ep - (fit_size + CSF_SIZE) - 512 - align_len) & |
| ~align_len; |
| |
| flash_header_v2_t ivt_header = { { 0xd1, 0x2000, 0x40 }, |
| load_addr, 0, 0, 0, |
| (load_addr + fit_size), |
| (load_addr + fit_size + 0x20), |
| 0 }; |
| |
| if (write(fd, &ivt_header, sizeof(flash_header_v2_t)) != |
| sizeof(flash_header_v2_t)) { |
| fprintf(stderr, "IVT writing error on fit image\n"); |
| exit(EXIT_FAILURE); |
| } |
| |
| *fit_load_addr = load_addr; |
| |
| return fit_offset + fit_size; |
| } |
| |
| static void dump_header_v2(imx_header_v3_t *imx_header, int index) |
| { |
| const char *ivt_name[2] = {"HDMI FW", "LOADER IMAGE"}; |
| |
| fprintf(stdout, "========= IVT HEADER [%s] =========\n", |
| ivt_name[index]); |
| fprintf(stdout, "header.tag: \t\t0x%x\n", |
| imx_header[index].fhdr.header.tag); |
| fprintf(stdout, "header.length: \t\t0x%x\n", |
| imx_header[index].fhdr.header.length); |
| fprintf(stdout, "header.version: \t0x%x\n", |
| imx_header[index].fhdr.header.version); |
| fprintf(stdout, "entry: \t\t\t0x%x\n", |
| imx_header[index].fhdr.entry); |
| fprintf(stdout, "reserved1: \t\t0x%x\n", |
| imx_header[index].fhdr.reserved1); |
| fprintf(stdout, "dcd_ptr: \t\t0x%x\n", |
| imx_header[index].fhdr.dcd_ptr); |
| fprintf(stdout, "boot_data_ptr: \t\t0x%x\n", |
| imx_header[index].fhdr.boot_data_ptr); |
| fprintf(stdout, "self: \t\t\t0x%x\n", |
| imx_header[index].fhdr.self); |
| fprintf(stdout, "csf: \t\t\t0x%x\n", |
| imx_header[index].fhdr.csf); |
| fprintf(stdout, "reserved2: \t\t0x%x\n", |
| imx_header[index].fhdr.reserved2); |
| |
| fprintf(stdout, "boot_data.start: \t0x%x\n", |
| imx_header[index].boot_data.start); |
| fprintf(stdout, "boot_data.size: \t0x%x\n", |
| imx_header[index].boot_data.size); |
| fprintf(stdout, "boot_data.plugin: \t0x%x\n", |
| imx_header[index].boot_data.plugin); |
| } |
| |
| void build_image(int ofd) |
| { |
| int file_off, header_hdmi_off = 0, header_image_off; |
| int hdmi_fd, ap_fd, sld_fd; |
| uint32_t sld_load_addr = 0; |
| uint32_t csf_off, sld_csf_off = 0; |
| int ret; |
| struct stat sbuf; |
| |
| if (!ap_img) { |
| fprintf(stderr, "No LOADER image specificed\n"); |
| exit(EXIT_FAILURE); |
| } |
| |
| file_off = 0; |
| |
| if (signed_hdmi) { |
| header_hdmi_off = file_off + ivt_offset; |
| |
| hdmi_fd = open(signed_hdmi, O_RDONLY | O_BINARY); |
| if (hdmi_fd < 0) { |
| fprintf(stderr, "%s: Can't open: %s\n", |
| signed_hdmi, strerror(errno)); |
| exit(EXIT_FAILURE); |
| } |
| |
| if (fstat(hdmi_fd, &sbuf) < 0) { |
| fprintf(stderr, "%s: Can't stat: %s\n", |
| signed_hdmi, strerror(errno)); |
| exit(EXIT_FAILURE); |
| } |
| close(hdmi_fd); |
| |
| /* |
| * Aligned to 104KB = 92KB FW image + 0x8000 |
| * (IVT and alignment) + 0x4000 (second IVT + CSF) |
| */ |
| file_off += ALIGN(sbuf.st_size, |
| HDMI_FW_SIZE + 0x2000 + 0x1000); |
| } |
| |
| header_image_off = file_off + ivt_offset; |
| |
| ap_fd = open(ap_img, O_RDONLY | O_BINARY); |
| if (ap_fd < 0) { |
| fprintf(stderr, "%s: Can't open: %s\n", |
| ap_img, strerror(errno)); |
| exit(EXIT_FAILURE); |
| } |
| if (fstat(ap_fd, &sbuf) < 0) { |
| fprintf(stderr, "%s: Can't stat: %s\n", |
| ap_img, strerror(errno)); |
| exit(EXIT_FAILURE); |
| } |
| close(ap_fd); |
| |
| imx_header[IMAGE_IVT_ID].fhdr.header.tag = IVT_HEADER_TAG; /* 0xD1 */ |
| imx_header[IMAGE_IVT_ID].fhdr.header.length = |
| cpu_to_be16(sizeof(flash_header_v2_t)); |
| imx_header[IMAGE_IVT_ID].fhdr.header.version = IVT_VERSION_V3; /* 0x41 */ |
| imx_header[IMAGE_IVT_ID].fhdr.entry = ap_start_addr; |
| imx_header[IMAGE_IVT_ID].fhdr.self = ap_start_addr - |
| sizeof(imx_header_v3_t); |
| imx_header[IMAGE_IVT_ID].fhdr.dcd_ptr = 0; |
| imx_header[IMAGE_IVT_ID].fhdr.boot_data_ptr = |
| imx_header[IMAGE_IVT_ID].fhdr.self + |
| offsetof(imx_header_v3_t, boot_data); |
| imx_header[IMAGE_IVT_ID].boot_data.start = |
| imx_header[IMAGE_IVT_ID].fhdr.self - ivt_offset; |
| imx_header[IMAGE_IVT_ID].boot_data.size = |
| ALIGN(sbuf.st_size + sizeof(imx_header_v3_t) + ivt_offset, |
| sector_size); |
| |
| image_off = header_image_off + sizeof(imx_header_v3_t); |
| file_off += imx_header[IMAGE_IVT_ID].boot_data.size; |
| |
| imx_header[IMAGE_IVT_ID].boot_data.plugin = 0; |
| imx_header[IMAGE_IVT_ID].fhdr.csf = |
| imx_header[IMAGE_IVT_ID].boot_data.start + |
| imx_header[IMAGE_IVT_ID].boot_data.size; |
| |
| imx_header[IMAGE_IVT_ID].boot_data.size += CSF_SIZE; /* 8K region dummy CSF */ |
| |
| csf_off = file_off; |
| file_off += CSF_SIZE; |
| |
| /* Second boot loader image */ |
| if (sld_img) { |
| if (!using_fit) { |
| fprintf(stderr, "Not support no fit\n"); |
| exit(EXIT_FAILURE); |
| } else { |
| sld_header_off = sld_src_off - rom_image_offset; |
| /* |
| * Record the second bootloader relative offset in |
| * image's IVT reserved1 |
| */ |
| if (rom_version == ROM_V1) { |
| imx_header[IMAGE_IVT_ID].fhdr.reserved1 = |
| sld_header_off - header_image_off; |
| } |
| sld_fd = open(sld_img, O_RDONLY | O_BINARY); |
| if (sld_fd < 0) { |
| fprintf(stderr, "%s: Can't open: %s\n", |
| sld_img, strerror(errno)); |
| exit(EXIT_FAILURE); |
| } |
| |
| if (fstat(sld_fd, &sbuf) < 0) { |
| fprintf(stderr, "%s: Can't stat: %s\n", |
| sld_img, strerror(errno)); |
| exit(EXIT_FAILURE); |
| } |
| |
| close(sld_fd); |
| |
| file_off = sld_header_off; |
| file_off += sbuf.st_size + sizeof(image_header_t); |
| } |
| } |
| |
| if (signed_hdmi) { |
| header_hdmi_off -= ivt_offset; |
| ret = lseek(ofd, header_hdmi_off, SEEK_SET); |
| if (ret < 0) { |
| fprintf(stderr, "lseek ofd fail for hdmi\n"); |
| exit(EXIT_FAILURE); |
| } |
| |
| /* The signed HDMI FW has 0x400 IVT offset, need remove it */ |
| copy_file(ofd, signed_hdmi, 0, header_hdmi_off, 0x400); |
| } |
| |
| /* Main Image */ |
| header_image_off -= ivt_offset; |
| image_off -= ivt_offset; |
| ret = lseek(ofd, header_image_off, SEEK_SET); |
| if (ret < 0) { |
| fprintf(stderr, "lseek ofd fail\n"); |
| exit(EXIT_FAILURE); |
| } |
| |
| /* Write image header */ |
| if (write(ofd, &imx_header[IMAGE_IVT_ID], sizeof(imx_header_v3_t)) != |
| sizeof(imx_header_v3_t)) { |
| fprintf(stderr, "error writing image hdr\n"); |
| exit(1); |
| } |
| |
| copy_file(ofd, ap_img, 0, image_off, 0); |
| |
| csf_off -= ivt_offset; |
| fill_zero(ofd, CSF_SIZE, csf_off); |
| |
| if (sld_img) { |
| sld_header_off -= ivt_offset; |
| ret = lseek(ofd, sld_header_off, SEEK_SET); |
| if (ret < 0) { |
| fprintf(stderr, "lseek ofd fail for sld_img\n"); |
| exit(EXIT_FAILURE); |
| } |
| |
| /* Write image header */ |
| if (!using_fit) { |
| /* TODO */ |
| } else { |
| copy_file(ofd, sld_img, 0, sld_header_off, 0); |
| sld_csf_off = |
| generate_ivt_for_fit(ofd, sld_header_off, |
| sld_start_addr, |
| &sld_load_addr) + 0x20; |
| } |
| } |
| |
| if (!signed_hdmi) |
| dump_header_v2(imx_header, 0); |
| dump_header_v2(imx_header, 1); |
| |
| fprintf(stdout, "========= OFFSET dump ========="); |
| if (signed_hdmi) { |
| fprintf(stdout, "\nSIGNED HDMI FW:\n"); |
| fprintf(stdout, " header_hdmi_off \t0x%x\n", |
| header_hdmi_off); |
| } |
| |
| fprintf(stdout, "\nLoader IMAGE:\n"); |
| fprintf(stdout, " header_image_off \t0x%x\n image_off \t\t0x%x\n csf_off \t\t0x%x\n", |
| header_image_off, image_off, csf_off); |
| fprintf(stdout, " spl hab block: \t0x%x 0x%x 0x%x\n", |
| imx_header[IMAGE_IVT_ID].fhdr.self, header_image_off, |
| csf_off - header_image_off); |
| |
| fprintf(stdout, "\nSecond Loader IMAGE:\n"); |
| fprintf(stdout, " sld_header_off \t0x%x\n", |
| sld_header_off); |
| fprintf(stdout, " sld_csf_off \t\t0x%x\n", |
| sld_csf_off); |
| fprintf(stdout, " sld hab block: \t0x%x 0x%x 0x%x\n", |
| sld_load_addr, sld_header_off, sld_csf_off - sld_header_off); |
| } |
| |
| int imx8mimage_copy_image(int outfd, struct image_tool_params *mparams) |
| { |
| /* |
| * SECO FW is a container image, this is to calculate the |
| * 2nd container offset. |
| */ |
| fprintf(stdout, "parsing %s\n", mparams->imagename); |
| parse_cfg_file(mparams->imagename); |
| |
| build_image(outfd); |
| |
| return 0; |
| } |
| |
| /* |
| * imx8mimage parameters |
| */ |
| U_BOOT_IMAGE_TYPE( |
| imx8mimage, |
| "NXP i.MX8M Boot Image support", |
| 0, |
| NULL, |
| imx8mimage_check_params, |
| NULL, |
| imx8mimage_print_header, |
| imx8mimage_set_header, |
| NULL, |
| imx8mimage_check_image_types, |
| NULL, |
| NULL |
| ); |