| # |
| # (C) Copyright 2000-2002 |
| # Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| # |
| # See file CREDITS for list of people who contributed to this |
| # project. |
| # |
| # This program is free software; you can redistribute it and/or |
| # modify it under the terms of the GNU General Public License as |
| # published by the Free Software Foundation; either version 2 of |
| # the License, or (at your option) any later version. |
| # |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| # GNU General Public License for more details. |
| # |
| # You should have received a copy of the GNU General Public License |
| # along with this program; if not, write to the Free Software |
| # Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| # MA 02111-1307 USA |
| # |
| |
| CROSS_COMPILE ?= arm-linux- |
| |
| ifndef CONFIG_STANDALONE_LOAD_ADDR |
| ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TI814X),) |
| CONFIG_STANDALONE_LOAD_ADDR = 0x80300000 |
| else |
| CONFIG_STANDALONE_LOAD_ADDR = 0xc100000 |
| endif |
| endif |
| |
| LDFLAGS_FINAL += --gc-sections |
| PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections |
| |
| # Support generic board on ARM |
| __HAVE_ARCH_GENERIC_BOARD := y |
| |
| PLATFORM_CPPFLAGS += -DCONFIG_ARM -D__ARM__ |
| |
| # Choose between ARM/Thumb instruction sets |
| ifeq ($(CONFIG_SYS_THUMB_BUILD),y) |
| PF_CPPFLAGS_ARM := $(call cc-option, -mthumb -mthumb-interwork,\ |
| $(call cc-option,-marm,)\ |
| $(call cc-option,-mno-thumb-interwork,)\ |
| ) |
| else |
| PF_CPPFLAGS_ARM := $(call cc-option,-marm,) \ |
| $(call cc-option,-mno-thumb-interwork,) |
| endif |
| |
| # Only test once |
| ifneq ($(CONFIG_SPL_BUILD),y) |
| ALL-$(CONFIG_SYS_THUMB_BUILD) += checkthumb |
| endif |
| |
| # Try if EABI is supported, else fall back to old API, |
| # i. e. for example: |
| # - with ELDK 4.2 (EABI supported), use: |
| # -mabi=aapcs-linux |
| # - with ELDK 4.1 (gcc 4.x, no EABI), use: |
| # -mabi=apcs-gnu |
| # - with ELDK 3.1 (gcc 3.x), use: |
| # -mapcs-32 |
| PF_CPPFLAGS_ABI := $(call cc-option,\ |
| -mabi=aapcs-linux,\ |
| $(call cc-option,\ |
| -mapcs-32,\ |
| $(call cc-option,\ |
| -mabi=apcs-gnu,\ |
| )\ |
| )\ |
| ) |
| PLATFORM_CPPFLAGS += $(PF_CPPFLAGS_ARM) $(PF_CPPFLAGS_ABI) |
| |
| # For EABI, make sure to provide raise() |
| ifneq (,$(findstring -mabi=aapcs-linux,$(PLATFORM_CPPFLAGS))) |
| # This file is parsed many times, so the string may get added multiple |
| # times. Also, the prefix needs to be different based on whether |
| # CONFIG_SPL_BUILD is defined or not. 'filter-out' the existing entry |
| # before adding the correct one. |
| ifdef CONFIG_SPL_BUILD |
| PLATFORM_LIBS := $(SPLTREE)/arch/arm/lib/eabi_compat.o \ |
| $(filter-out %/arch/arm/lib/eabi_compat.o, $(PLATFORM_LIBS)) |
| else |
| PLATFORM_LIBS := $(OBJTREE)/arch/arm/lib/eabi_compat.o \ |
| $(filter-out %/arch/arm/lib/eabi_compat.o, $(PLATFORM_LIBS)) |
| endif |
| endif |
| |
| # needed for relocation |
| LDFLAGS_u-boot += -pie |
| |
| # |
| # FIXME: binutils versions < 2.22 have a bug in the assembler where |
| # branches to weak symbols can be incorrectly optimized in thumb mode |
| # to a short branch (b.n instruction) that won't reach when the symbol |
| # gets preempted |
| # |
| # http://sourceware.org/bugzilla/show_bug.cgi?id=12532 |
| # |
| ifeq ($(CONFIG_SYS_THUMB_BUILD),y) |
| ifeq ($(GAS_BUG_12532),) |
| export GAS_BUG_12532:=$(shell if [ $(call binutils-version) -lt 0222 ] ; \ |
| then echo y; else echo n; fi) |
| endif |
| ifeq ($(GAS_BUG_12532),y) |
| PLATFORM_RELFLAGS += -fno-optimize-sibling-calls |
| endif |
| endif |
| |
| # check that only R_ARM_RELATIVE relocations are generated |
| ifneq ($(CONFIG_SPL_BUILD),y) |
| ALL-y += checkarmreloc |
| endif |