| /* |
| * Copyright (C) 2005-2006 Atmel Corporation |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| #include <common.h> |
| |
| #ifdef CFG_HSDRAMC |
| #include <asm/io.h> |
| #include <asm/sdram.h> |
| |
| #include <asm/arch/platform.h> |
| |
| #include "hsdramc1.h" |
| |
| struct hsdramc { |
| const struct device *hebi; |
| void *regs; |
| }; |
| |
| static struct hsdramc hsdramc; |
| |
| unsigned long sdram_init(const struct sdram_info *info) |
| { |
| unsigned long *sdram = (unsigned long *)uncached(info->phys_addr); |
| unsigned long sdram_size; |
| unsigned long tmp; |
| unsigned long bus_hz; |
| unsigned int i; |
| |
| hsdramc.hebi = get_device(DEVICE_HEBI); |
| if (!hsdramc.hebi) |
| return 0; |
| |
| /* FIXME: Both of these lines are complete hacks */ |
| hsdramc.regs = hsdramc.hebi->regs + 0x400; |
| bus_hz = pm_get_clock_freq(hsdramc.hebi->resource[0].u.clock.id); |
| |
| cpu_enable_sdram(); |
| |
| tmp = (HSDRAMC1_BF(NC, info->col_bits - 8) |
| | HSDRAMC1_BF(NR, info->row_bits - 11) |
| | HSDRAMC1_BF(NB, info->bank_bits - 1) |
| | HSDRAMC1_BF(CAS, info->cas) |
| | HSDRAMC1_BF(TWR, info->twr) |
| | HSDRAMC1_BF(TRC, info->trc) |
| | HSDRAMC1_BF(TRP, info->trp) |
| | HSDRAMC1_BF(TRCD, info->trcd) |
| | HSDRAMC1_BF(TRAS, info->tras) |
| | HSDRAMC1_BF(TXSR, info->txsr)); |
| |
| #ifdef CFG_SDRAM_16BIT |
| tmp |= HSDRAMC1_BIT(DBW); |
| sdram_size = 1 << (info->row_bits + info->col_bits |
| + info->bank_bits + 1); |
| #else |
| sdram_size = 1 << (info->row_bits + info->col_bits |
| + info->bank_bits + 2); |
| #endif |
| |
| hsdramc1_writel(&hsdramc, CR, tmp); |
| |
| /* |
| * Initialization sequence for SDRAM, from the data sheet: |
| * |
| * 1. A minimum pause of 200 us is provided to precede any |
| * signal toggle. |
| */ |
| udelay(200); |
| |
| /* |
| * 2. A Precharge All command is issued to the SDRAM |
| */ |
| hsdramc1_writel(&hsdramc, MR, HSDRAMC1_MODE_BANKS_PRECHARGE); |
| hsdramc1_readl(&hsdramc, MR); |
| writel(0, sdram); |
| |
| /* |
| * 3. Eight auto-refresh (CBR) cycles are provided |
| */ |
| hsdramc1_writel(&hsdramc, MR, HSDRAMC1_MODE_AUTO_REFRESH); |
| hsdramc1_readl(&hsdramc, MR); |
| for (i = 0; i < 8; i++) |
| writel(0, sdram); |
| |
| /* |
| * 4. A mode register set (MRS) cycle is issued to program |
| * SDRAM parameters, in particular CAS latency and burst |
| * length. |
| * |
| * CAS from info struct, burst length 1, serial burst type |
| */ |
| hsdramc1_writel(&hsdramc, MR, HSDRAMC1_MODE_LOAD_MODE); |
| hsdramc1_readl(&hsdramc, MR); |
| writel(0, sdram + (info->cas << 4)); |
| |
| /* |
| * 5. A Normal Mode command is provided, 3 clocks after tMRD |
| * is met. |
| * |
| * From the timing diagram, it looks like tMRD is 3 |
| * cycles...try a dummy read from the peripheral bus. |
| */ |
| hsdramc1_readl(&hsdramc, MR); |
| hsdramc1_writel(&hsdramc, MR, HSDRAMC1_MODE_NORMAL); |
| hsdramc1_readl(&hsdramc, MR); |
| writel(0, sdram); |
| |
| /* |
| * 6. Write refresh rate into SDRAMC refresh timer count |
| * register (refresh rate = timing between refresh cycles). |
| * |
| * 15.6 us is a typical value for a burst of length one |
| */ |
| hsdramc1_writel(&hsdramc, TR, (156 * (bus_hz / 1000)) / 10000); |
| |
| printf("SDRAM: %u MB at address 0x%08lx\n", |
| sdram_size >> 20, info->phys_addr); |
| |
| printf("Testing SDRAM..."); |
| for (i = 0; i < sdram_size / 4; i++) |
| sdram[i] = i; |
| |
| for (i = 0; i < sdram_size / 4; i++) { |
| tmp = sdram[i]; |
| if (tmp != i) { |
| printf("FAILED at address 0x%08lx\n", |
| info->phys_addr + i * 4); |
| printf("SDRAM: read 0x%lx, expected 0x%lx\n", tmp, i); |
| return 0; |
| } |
| } |
| |
| puts("OK\n"); |
| |
| return sdram_size; |
| } |
| |
| #endif /* CFG_HSDRAMC */ |