| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * PCI autoconfiguration library |
| * |
| * Author: Matt Porter <mporter@mvista.com> |
| * |
| * Copyright 2000 MontaVista Software Inc. |
| */ |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <errno.h> |
| #include <log.h> |
| #include <pci.h> |
| #include "pci_internal.h" |
| |
| /* the user can define CONFIG_SYS_PCI_CACHE_LINE_SIZE to avoid problems */ |
| #ifndef CONFIG_SYS_PCI_CACHE_LINE_SIZE |
| #define CONFIG_SYS_PCI_CACHE_LINE_SIZE 8 |
| #endif |
| |
| static void dm_pciauto_setup_device(struct udevice *dev, int bars_num, |
| struct pci_region *mem, |
| struct pci_region *prefetch, |
| struct pci_region *io) |
| { |
| u32 bar_response; |
| pci_size_t bar_size; |
| u16 cmdstat = 0; |
| int bar, bar_nr = 0; |
| u8 header_type; |
| int rom_addr; |
| pci_addr_t bar_value; |
| struct pci_region *bar_res = NULL; |
| int found_mem64 = 0; |
| u16 class; |
| |
| dm_pci_read_config16(dev, PCI_COMMAND, &cmdstat); |
| cmdstat = (cmdstat & ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) | |
| PCI_COMMAND_MASTER; |
| |
| for (bar = PCI_BASE_ADDRESS_0; |
| bar < PCI_BASE_ADDRESS_0 + (bars_num * 4); bar += 4) { |
| int ret = 0; |
| |
| /* Tickle the BAR and get the response */ |
| dm_pci_write_config32(dev, bar, 0xffffffff); |
| dm_pci_read_config32(dev, bar, &bar_response); |
| |
| /* If BAR is not implemented (or invalid) go to the next BAR */ |
| if (!bar_response || bar_response == 0xffffffff) |
| continue; |
| |
| found_mem64 = 0; |
| |
| /* Check the BAR type and set our address mask */ |
| if (bar_response & PCI_BASE_ADDRESS_SPACE) { |
| bar_size = bar_response & PCI_BASE_ADDRESS_IO_MASK; |
| bar_size &= ~(bar_size - 1); |
| |
| bar_res = io; |
| |
| debug("PCI Autoconfig: BAR %d, I/O, size=0x%llx, ", |
| bar_nr, (unsigned long long)bar_size); |
| } else { |
| if ((bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) == |
| PCI_BASE_ADDRESS_MEM_TYPE_64) { |
| u32 bar_response_upper; |
| u64 bar64; |
| |
| dm_pci_write_config32(dev, bar + 4, 0xffffffff); |
| dm_pci_read_config32(dev, bar + 4, |
| &bar_response_upper); |
| |
| bar64 = ((u64)bar_response_upper << 32) | |
| bar_response; |
| |
| bar_size = ~(bar64 & PCI_BASE_ADDRESS_MEM_MASK) |
| + 1; |
| found_mem64 = 1; |
| } else { |
| bar_size = (u32)(~(bar_response & |
| PCI_BASE_ADDRESS_MEM_MASK) + 1); |
| } |
| |
| if (prefetch && |
| (bar_response & PCI_BASE_ADDRESS_MEM_PREFETCH)) |
| bar_res = prefetch; |
| else |
| bar_res = mem; |
| |
| debug("PCI Autoconfig: BAR %d, %s%s, size=0x%llx, ", |
| bar_nr, bar_res == prefetch ? "Prf" : "Mem", |
| found_mem64 ? "64" : "", |
| (unsigned long long)bar_size); |
| } |
| |
| ret = pciauto_region_allocate(bar_res, bar_size, |
| &bar_value, found_mem64); |
| if (ret) |
| printf("PCI: Failed autoconfig bar %x\n", bar); |
| |
| if (!ret) { |
| /* Write it out and update our limit */ |
| dm_pci_write_config32(dev, bar, (u32)bar_value); |
| |
| if (found_mem64) { |
| bar += 4; |
| #ifdef CONFIG_SYS_PCI_64BIT |
| dm_pci_write_config32(dev, bar, |
| (u32)(bar_value >> 32)); |
| #else |
| /* |
| * If we are a 64-bit decoder then increment to |
| * the upper 32 bits of the bar and force it to |
| * locate in the lower 4GB of memory. |
| */ |
| dm_pci_write_config32(dev, bar, 0x00000000); |
| #endif |
| } |
| } |
| |
| cmdstat |= (bar_response & PCI_BASE_ADDRESS_SPACE) ? |
| PCI_COMMAND_IO : PCI_COMMAND_MEMORY; |
| |
| debug("\n"); |
| |
| bar_nr++; |
| } |
| |
| /* Configure the expansion ROM address */ |
| dm_pci_read_config8(dev, PCI_HEADER_TYPE, &header_type); |
| header_type &= 0x7f; |
| if (header_type != PCI_HEADER_TYPE_CARDBUS) { |
| rom_addr = (header_type == PCI_HEADER_TYPE_NORMAL) ? |
| PCI_ROM_ADDRESS : PCI_ROM_ADDRESS1; |
| dm_pci_write_config32(dev, rom_addr, 0xfffffffe); |
| dm_pci_read_config32(dev, rom_addr, &bar_response); |
| if (bar_response) { |
| bar_size = -(bar_response & ~1); |
| debug("PCI Autoconfig: ROM, size=%#x, ", |
| (unsigned int)bar_size); |
| if (pciauto_region_allocate(mem, bar_size, &bar_value, |
| false) == 0) { |
| dm_pci_write_config32(dev, rom_addr, bar_value); |
| } |
| cmdstat |= PCI_COMMAND_MEMORY; |
| debug("\n"); |
| } |
| } |
| |
| /* PCI_COMMAND_IO must be set for VGA device */ |
| dm_pci_read_config16(dev, PCI_CLASS_DEVICE, &class); |
| if (class == PCI_CLASS_DISPLAY_VGA) |
| cmdstat |= PCI_COMMAND_IO; |
| |
| dm_pci_write_config16(dev, PCI_COMMAND, cmdstat); |
| dm_pci_write_config8(dev, PCI_CACHE_LINE_SIZE, |
| CONFIG_SYS_PCI_CACHE_LINE_SIZE); |
| dm_pci_write_config8(dev, PCI_LATENCY_TIMER, 0x80); |
| } |
| |
| void dm_pciauto_prescan_setup_bridge(struct udevice *dev, int sub_bus) |
| { |
| struct pci_region *pci_mem; |
| struct pci_region *pci_prefetch; |
| struct pci_region *pci_io; |
| u16 cmdstat, prefechable_64; |
| u8 io_32; |
| struct udevice *ctlr = pci_get_controller(dev); |
| struct pci_controller *ctlr_hose = dev_get_uclass_priv(ctlr); |
| |
| pci_mem = ctlr_hose->pci_mem; |
| pci_prefetch = ctlr_hose->pci_prefetch; |
| pci_io = ctlr_hose->pci_io; |
| |
| dm_pci_read_config16(dev, PCI_COMMAND, &cmdstat); |
| dm_pci_read_config16(dev, PCI_PREF_MEMORY_BASE, &prefechable_64); |
| prefechable_64 &= PCI_PREF_RANGE_TYPE_MASK; |
| dm_pci_read_config8(dev, PCI_IO_LIMIT, &io_32); |
| io_32 &= PCI_IO_RANGE_TYPE_MASK; |
| |
| /* Configure bus number registers */ |
| dm_pci_write_config8(dev, PCI_PRIMARY_BUS, |
| PCI_BUS(dm_pci_get_bdf(dev)) - dev_seq(ctlr)); |
| dm_pci_write_config8(dev, PCI_SECONDARY_BUS, sub_bus - dev_seq(ctlr)); |
| dm_pci_write_config8(dev, PCI_SUBORDINATE_BUS, 0xff); |
| |
| if (pci_mem) { |
| /* Round memory allocator to 1MB boundary */ |
| pciauto_region_align(pci_mem, 0x100000); |
| |
| /* |
| * Set up memory and I/O filter limits, assume 32-bit |
| * I/O space |
| */ |
| dm_pci_write_config16(dev, PCI_MEMORY_BASE, |
| ((pci_mem->bus_lower & 0xfff00000) >> 16) & |
| PCI_MEMORY_RANGE_MASK); |
| |
| cmdstat |= PCI_COMMAND_MEMORY; |
| } |
| |
| if (pci_prefetch) { |
| /* Round memory allocator to 1MB boundary */ |
| pciauto_region_align(pci_prefetch, 0x100000); |
| |
| /* |
| * Set up memory and I/O filter limits, assume 32-bit |
| * I/O space |
| */ |
| dm_pci_write_config16(dev, PCI_PREF_MEMORY_BASE, |
| (((pci_prefetch->bus_lower & 0xfff00000) >> 16) & |
| PCI_PREF_RANGE_MASK) | prefechable_64); |
| if (prefechable_64 == PCI_PREF_RANGE_TYPE_64) |
| #ifdef CONFIG_SYS_PCI_64BIT |
| dm_pci_write_config32(dev, PCI_PREF_BASE_UPPER32, |
| pci_prefetch->bus_lower >> 32); |
| #else |
| dm_pci_write_config32(dev, PCI_PREF_BASE_UPPER32, 0x0); |
| #endif |
| |
| cmdstat |= PCI_COMMAND_MEMORY; |
| } else { |
| /* We don't support prefetchable memory for now, so disable */ |
| dm_pci_write_config16(dev, PCI_PREF_MEMORY_BASE, 0x1000 | |
| prefechable_64); |
| dm_pci_write_config16(dev, PCI_PREF_MEMORY_LIMIT, 0x0 | |
| prefechable_64); |
| if (prefechable_64 == PCI_PREF_RANGE_TYPE_64) { |
| dm_pci_write_config16(dev, PCI_PREF_BASE_UPPER32, 0x0); |
| dm_pci_write_config16(dev, PCI_PREF_LIMIT_UPPER32, 0x0); |
| } |
| } |
| |
| if (pci_io) { |
| /* Round I/O allocator to 4KB boundary */ |
| pciauto_region_align(pci_io, 0x1000); |
| |
| dm_pci_write_config8(dev, PCI_IO_BASE, |
| (((pci_io->bus_lower & 0x0000f000) >> 8) & |
| PCI_IO_RANGE_MASK) | io_32); |
| if (io_32 == PCI_IO_RANGE_TYPE_32) |
| dm_pci_write_config16(dev, PCI_IO_BASE_UPPER16, |
| (pci_io->bus_lower & 0xffff0000) >> 16); |
| |
| cmdstat |= PCI_COMMAND_IO; |
| } |
| |
| /* Enable memory and I/O accesses, enable bus master */ |
| dm_pci_write_config16(dev, PCI_COMMAND, cmdstat | PCI_COMMAND_MASTER); |
| } |
| |
| void dm_pciauto_postscan_setup_bridge(struct udevice *dev, int sub_bus) |
| { |
| struct pci_region *pci_mem; |
| struct pci_region *pci_prefetch; |
| struct pci_region *pci_io; |
| struct udevice *ctlr = pci_get_controller(dev); |
| struct pci_controller *ctlr_hose = dev_get_uclass_priv(ctlr); |
| |
| pci_mem = ctlr_hose->pci_mem; |
| pci_prefetch = ctlr_hose->pci_prefetch; |
| pci_io = ctlr_hose->pci_io; |
| |
| /* Configure bus number registers */ |
| dm_pci_write_config8(dev, PCI_SUBORDINATE_BUS, sub_bus - dev_seq(ctlr)); |
| |
| if (pci_mem) { |
| /* Round memory allocator to 1MB boundary */ |
| pciauto_region_align(pci_mem, 0x100000); |
| |
| dm_pci_write_config16(dev, PCI_MEMORY_LIMIT, |
| ((pci_mem->bus_lower - 1) >> 16) & |
| PCI_MEMORY_RANGE_MASK); |
| } |
| |
| if (pci_prefetch) { |
| u16 prefechable_64; |
| |
| dm_pci_read_config16(dev, PCI_PREF_MEMORY_LIMIT, |
| &prefechable_64); |
| prefechable_64 &= PCI_PREF_RANGE_TYPE_MASK; |
| |
| /* Round memory allocator to 1MB boundary */ |
| pciauto_region_align(pci_prefetch, 0x100000); |
| |
| dm_pci_write_config16(dev, PCI_PREF_MEMORY_LIMIT, |
| (((pci_prefetch->bus_lower - 1) >> 16) & |
| PCI_PREF_RANGE_MASK) | prefechable_64); |
| if (prefechable_64 == PCI_PREF_RANGE_TYPE_64) |
| #ifdef CONFIG_SYS_PCI_64BIT |
| dm_pci_write_config32(dev, PCI_PREF_LIMIT_UPPER32, |
| (pci_prefetch->bus_lower - 1) >> 32); |
| #else |
| dm_pci_write_config32(dev, PCI_PREF_LIMIT_UPPER32, 0x0); |
| #endif |
| } |
| |
| if (pci_io) { |
| u8 io_32; |
| |
| dm_pci_read_config8(dev, PCI_IO_LIMIT, |
| &io_32); |
| io_32 &= PCI_IO_RANGE_TYPE_MASK; |
| |
| /* Round I/O allocator to 4KB boundary */ |
| pciauto_region_align(pci_io, 0x1000); |
| |
| dm_pci_write_config8(dev, PCI_IO_LIMIT, |
| ((((pci_io->bus_lower - 1) & 0x0000f000) >> 8) & |
| PCI_IO_RANGE_MASK) | io_32); |
| if (io_32 == PCI_IO_RANGE_TYPE_32) |
| dm_pci_write_config16(dev, PCI_IO_LIMIT_UPPER16, |
| ((pci_io->bus_lower - 1) & 0xffff0000) >> 16); |
| } |
| } |
| |
| /* |
| * HJF: Changed this to return int. I think this is required |
| * to get the correct result when scanning bridges |
| */ |
| int dm_pciauto_config_device(struct udevice *dev) |
| { |
| struct pci_region *pci_mem; |
| struct pci_region *pci_prefetch; |
| struct pci_region *pci_io; |
| unsigned int sub_bus = PCI_BUS(dm_pci_get_bdf(dev)); |
| unsigned short class; |
| struct udevice *ctlr = pci_get_controller(dev); |
| struct pci_controller *ctlr_hose = dev_get_uclass_priv(ctlr); |
| int ret; |
| |
| pci_mem = ctlr_hose->pci_mem; |
| pci_prefetch = ctlr_hose->pci_prefetch; |
| pci_io = ctlr_hose->pci_io; |
| |
| dm_pci_read_config16(dev, PCI_CLASS_DEVICE, &class); |
| |
| switch (class) { |
| case PCI_CLASS_BRIDGE_PCI: |
| debug("PCI Autoconfig: Found P2P bridge, device %d\n", |
| PCI_DEV(dm_pci_get_bdf(dev))); |
| |
| dm_pciauto_setup_device(dev, 2, pci_mem, pci_prefetch, pci_io); |
| |
| ret = dm_pci_hose_probe_bus(dev); |
| if (ret < 0) |
| return log_msg_ret("probe", ret); |
| sub_bus = ret; |
| break; |
| |
| case PCI_CLASS_BRIDGE_CARDBUS: |
| /* |
| * just do a minimal setup of the bridge, |
| * let the OS take care of the rest |
| */ |
| dm_pciauto_setup_device(dev, 0, pci_mem, pci_prefetch, pci_io); |
| |
| debug("PCI Autoconfig: Found P2CardBus bridge, device %d\n", |
| PCI_DEV(dm_pci_get_bdf(dev))); |
| |
| break; |
| |
| #if defined(CONFIG_PCIAUTO_SKIP_HOST_BRIDGE) |
| case PCI_CLASS_BRIDGE_OTHER: |
| debug("PCI Autoconfig: Skipping bridge device %d\n", |
| PCI_DEV(dm_pci_get_bdf(dev))); |
| break; |
| #endif |
| #if defined(CONFIG_ARCH_MPC834X) |
| case PCI_CLASS_BRIDGE_OTHER: |
| /* |
| * The host/PCI bridge 1 seems broken in 8349 - it presents |
| * itself as 'PCI_CLASS_BRIDGE_OTHER' and appears as an _agent_ |
| * device claiming resources io/mem/irq.. we only allow for |
| * the PIMMR window to be allocated (BAR0 - 1MB size) |
| */ |
| debug("PCI Autoconfig: Broken bridge found, only minimal config\n"); |
| dm_pciauto_setup_device(dev, 0, hose->pci_mem, |
| hose->pci_prefetch, hose->pci_io); |
| break; |
| #endif |
| |
| case PCI_CLASS_PROCESSOR_POWERPC: /* an agent or end-point */ |
| debug("PCI AutoConfig: Found PowerPC device\n"); |
| /* fall through */ |
| |
| default: |
| dm_pciauto_setup_device(dev, 6, pci_mem, pci_prefetch, pci_io); |
| break; |
| } |
| |
| return sub_bus; |
| } |