blob: 8c2310ac906488c14ca5047e03b49c324b0e20a2 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
/*
* Copyright (C) 2019, STMicroelectronics - All Rights Reserved
*/
#define LOG_CATEGORY UCLASS_RAM
#include <common.h>
#include <command.h>
#include <console.h>
#include <cli.h>
#include <clk.h>
#include <log.h>
#include <malloc.h>
#include <ram.h>
#include <reset.h>
#include <asm/global_data.h>
#include "stm32mp1_ddr.h"
#include "stm32mp1_tests.h"
DECLARE_GLOBAL_DATA_PTR;
enum ddr_command {
DDR_CMD_HELP,
DDR_CMD_INFO,
DDR_CMD_FREQ,
DDR_CMD_RESET,
DDR_CMD_PARAM,
DDR_CMD_PRINT,
DDR_CMD_EDIT,
DDR_CMD_STEP,
DDR_CMD_NEXT,
DDR_CMD_GO,
DDR_CMD_TEST,
DDR_CMD_TUNING,
DDR_CMD_UNKNOWN,
};
const char *step_str[] = {
[STEP_DDR_RESET] = "DDR_RESET",
[STEP_CTL_INIT] = "DDR_CTRL_INIT_DONE",
[STEP_PHY_INIT] = "DDR PHY_INIT_DONE",
[STEP_DDR_READY] = "DDR_READY",
[STEP_RUN] = "RUN"
};
enum ddr_command stm32mp1_get_command(char *cmd, int argc)
{
const char *cmd_string[DDR_CMD_UNKNOWN] = {
[DDR_CMD_HELP] = "help",
[DDR_CMD_INFO] = "info",
[DDR_CMD_FREQ] = "freq",
[DDR_CMD_RESET] = "reset",
[DDR_CMD_PARAM] = "param",
[DDR_CMD_PRINT] = "print",
[DDR_CMD_EDIT] = "edit",
[DDR_CMD_STEP] = "step",
[DDR_CMD_NEXT] = "next",
[DDR_CMD_GO] = "go",
#ifdef CONFIG_STM32MP1_DDR_TESTS
[DDR_CMD_TEST] = "test",
#endif
#ifdef CONFIG_STM32MP1_DDR_TUNING
[DDR_CMD_TUNING] = "tuning",
#endif
};
/* min and max number of argument */
const char cmd_arg[DDR_CMD_UNKNOWN][2] = {
[DDR_CMD_HELP] = { 0, 0 },
[DDR_CMD_INFO] = { 0, 255 },
[DDR_CMD_FREQ] = { 0, 1 },
[DDR_CMD_RESET] = { 0, 0 },
[DDR_CMD_PARAM] = { 0, 2 },
[DDR_CMD_PRINT] = { 0, 1 },
[DDR_CMD_EDIT] = { 2, 2 },
[DDR_CMD_STEP] = { 0, 1 },
[DDR_CMD_NEXT] = { 0, 0 },
[DDR_CMD_GO] = { 0, 0 },
#ifdef CONFIG_STM32MP1_DDR_TESTS
[DDR_CMD_TEST] = { 0, 255 },
#endif
#ifdef CONFIG_STM32MP1_DDR_TUNING
[DDR_CMD_TUNING] = { 0, 255 },
#endif
};
int i;
for (i = 0; i < DDR_CMD_UNKNOWN; i++)
if (!strcmp(cmd, cmd_string[i])) {
if (argc - 1 < cmd_arg[i][0]) {
printf("no enought argument (min=%d)\n",
cmd_arg[i][0]);
return DDR_CMD_UNKNOWN;
} else if (argc - 1 > cmd_arg[i][1]) {
printf("too many argument (max=%d)\n",
cmd_arg[i][1]);
return DDR_CMD_UNKNOWN;
} else {
return i;
}
}
printf("unknown command %s\n", cmd);
return DDR_CMD_UNKNOWN;
}
static void stm32mp1_do_usage(void)
{
const char *usage = {
"commands:\n\n"
"help displays help\n"
"info displays DDR information\n"
"info <param> <val> changes DDR information\n"
" with <param> = step, name, size, speed or cal\n"
"freq displays the DDR PHY frequency in kHz\n"
"freq <freq> changes the DDR PHY frequency\n"
"param [type|reg] prints input parameters\n"
"param <reg> <val> edits parameters in step 0\n"
"print [type|reg] dumps registers\n"
"edit <reg> <val> modifies one register\n"
"step lists the available step\n"
"step <n> go to the step <n>\n"
"next goes to the next step\n"
"go continues the U-Boot SPL execution\n"
"reset reboots machine\n"
#ifdef CONFIG_STM32MP1_DDR_TESTS
"test [help] | <n> [...] lists (with help) or executes test <n>\n"
#endif
#ifdef CONFIG_STM32MP1_DDR_TUNING
"tuning [help] | <n> [...] lists (with help) or execute tuning <n>\n"
#endif
"\nwith for [type|reg]:\n"
" all registers if absent\n"
" <type> = ctl, phy\n"
" or one category (static, timing, map, perf, cal, dyn)\n"
" <reg> = name of the register\n"
};
puts(usage);
}
static bool stm32mp1_check_step(enum stm32mp1_ddr_interact_step step,
enum stm32mp1_ddr_interact_step expected)
{
if (step != expected) {
printf("invalid step %d:%s expecting %d:%s\n",
step, step_str[step],
expected,
step_str[expected]);
return false;
}
return true;
}
static void stm32mp1_do_info(struct ddr_info *priv,
struct stm32mp1_ddr_config *config,
enum stm32mp1_ddr_interact_step step,
int argc, char *const argv[])
{
unsigned long value;
static char *ddr_name;
if (argc == 1) {
printf("step = %d : %s\n", step, step_str[step]);
printf("name = %s\n", config->info.name);
printf("size = 0x%x\n", config->info.size);
printf("speed = %d kHz\n", config->info.speed);
printf("cal = %d\n", config->p_cal_present);
return;
}
if (argc < 3) {
printf("no enought parameter\n");
return;
}
if (!strcmp(argv[1], "name")) {
u32 i, name_len = 0;
for (i = 2; i < argc; i++)
name_len += strlen(argv[i]) + 1;
if (ddr_name)
free(ddr_name);
ddr_name = malloc(name_len);
config->info.name = ddr_name;
if (!ddr_name) {
printf("alloc error, length %d\n", name_len);
return;
}
strcpy(ddr_name, argv[2]);
for (i = 3; i < argc; i++) {
strcat(ddr_name, " ");
strcat(ddr_name, argv[i]);
}
printf("name = %s\n", ddr_name);
return;
}
if (!strcmp(argv[1], "size")) {
if (strict_strtoul(argv[2], 16, &value) < 0) {
printf("invalid value %s\n", argv[2]);
} else {
config->info.size = value;
printf("size = 0x%x\n", config->info.size);
}
return;
}
if (!strcmp(argv[1], "speed")) {
if (strict_strtoul(argv[2], 10, &value) < 0) {
printf("invalid value %s\n", argv[2]);
} else {
config->info.speed = value;
printf("speed = %d kHz\n", config->info.speed);
value = clk_get_rate(&priv->clk);
printf("DDRPHY = %ld kHz\n", value / 1000);
}
return;
}
if (!strcmp(argv[1], "cal")) {
if (strict_strtoul(argv[2], 10, &value) < 0 ||
(value != 0 && value != 1)) {
printf("invalid value %s\n", argv[2]);
} else {
config->p_cal_present = value;
printf("cal = %d\n", config->p_cal_present);
}
return;
}
printf("argument %s invalid\n", argv[1]);
}
static bool stm32mp1_do_freq(struct ddr_info *priv,
int argc, char *const argv[])
{
unsigned long ddrphy_clk;
if (argc == 2) {
if (strict_strtoul(argv[1], 0, &ddrphy_clk) < 0) {
printf("invalid argument %s", argv[1]);
return false;
}
if (clk_set_rate(&priv->clk, ddrphy_clk * 1000)) {
printf("ERROR: update failed!\n");
return false;
}
}
ddrphy_clk = clk_get_rate(&priv->clk);
printf("DDRPHY = %ld kHz\n", ddrphy_clk / 1000);
if (argc == 2)
return true;
return false;
}
static void stm32mp1_do_param(enum stm32mp1_ddr_interact_step step,
const struct stm32mp1_ddr_config *config,
int argc, char *const argv[])
{
switch (argc) {
case 1:
stm32mp1_dump_param(config, NULL);
break;
case 2:
if (stm32mp1_dump_param(config, argv[1]))
printf("invalid argument %s\n",
argv[1]);
break;
case 3:
if (!stm32mp1_check_step(step, STEP_DDR_RESET))
return;
stm32mp1_edit_param(config, argv[1], argv[2]);
break;
}
}
static void stm32mp1_do_print(struct ddr_info *priv,
int argc, char *const argv[])
{
switch (argc) {
case 1:
stm32mp1_dump_reg(priv, NULL);
break;
case 2:
if (stm32mp1_dump_reg(priv, argv[1]))
printf("invalid argument %s\n",
argv[1]);
break;
}
}
static int stm32mp1_do_step(enum stm32mp1_ddr_interact_step step,
int argc, char *const argv[])
{
int i;
unsigned long value;
switch (argc) {
case 1:
for (i = 0; i < ARRAY_SIZE(step_str); i++)
printf("%d:%s\n", i, step_str[i]);
break;
case 2:
if ((strict_strtoul(argv[1], 0,
&value) < 0) ||
value >= ARRAY_SIZE(step_str)) {
printf("invalid argument %s\n",
argv[1]);
goto end;
}
if (value != STEP_DDR_RESET &&
value <= step) {
printf("invalid target %d:%s, current step is %d:%s\n",
(int)value, step_str[value],
step, step_str[step]);
goto end;
}
printf("step to %d:%s\n",
(int)value, step_str[value]);
return (int)value;
};
end:
return step;
}
#if defined(CONFIG_STM32MP1_DDR_TESTS) || defined(CONFIG_STM32MP1_DDR_TUNING)
static const char * const s_result[] = {
[TEST_PASSED] = "Pass",
[TEST_FAILED] = "Failed",
[TEST_ERROR] = "Error"
};
static void stm32mp1_ddr_subcmd(struct ddr_info *priv,
int argc, char *argv[],
const struct test_desc array[],
const int array_nb)
{
int i;
unsigned long value;
int result;
char string[50] = "";
if (argc == 1) {
printf("%s:%d\n", argv[0], array_nb);
for (i = 0; i < array_nb; i++)
printf("%d:%s:%s\n",
i, array[i].name, array[i].usage);
return;
}
if (argc > 1 && !strcmp(argv[1], "help")) {
printf("%s:%d\n", argv[0], array_nb);
for (i = 0; i < array_nb; i++)
printf("%d:%s:%s:%s\n", i,
array[i].name, array[i].usage, array[i].help);
return;
}
if ((strict_strtoul(argv[1], 0, &value) < 0) ||
value >= array_nb) {
sprintf(string, "invalid argument %s",
argv[1]);
result = TEST_FAILED;
goto end;
}
if (argc > (array[value].max_args + 2)) {
sprintf(string, "invalid nb of args %d, max %d",
argc - 2, array[value].max_args);
result = TEST_FAILED;
goto end;
}
printf("execute %d:%s\n", (int)value, array[value].name);
clear_ctrlc();
result = array[value].fct(priv->ctl, priv->phy,
string, argc - 2, &argv[2]);
end:
printf("Result: %s [%s]\n", s_result[result], string);
}
#endif
bool stm32mp1_ddr_interactive(void *priv,
enum stm32mp1_ddr_interact_step step,
const struct stm32mp1_ddr_config *config)
{
char buffer[CONFIG_SYS_CBSIZE];
char *argv[CONFIG_SYS_MAXARGS + 1]; /* NULL terminated */
int argc;
static int next_step = -1;
if (next_step < 0 && step == STEP_DDR_RESET) {
#ifdef CONFIG_STM32MP1_DDR_INTERACTIVE_FORCE
gd->flags &= ~(GD_FLG_SILENT |
GD_FLG_DISABLE_CONSOLE);
next_step = STEP_DDR_RESET;
#else
unsigned long start = get_timer(0);
while (1) {
if (tstc() && (getchar() == 'd')) {
next_step = STEP_DDR_RESET;
break;
}
if (get_timer(start) > 100)
break;
}
#endif
}
log_debug("** step %d ** %s / %d\n", step, step_str[step], next_step);
if (next_step < 0)
return false;
if (step < 0 || step > ARRAY_SIZE(step_str)) {
printf("** step %d ** INVALID\n", step);
return false;
}
printf("%d:%s\n", step, step_str[step]);
if (next_step > step)
return false;
while (next_step == step) {
cli_readline_into_buffer("DDR>", buffer, 0);
argc = cli_simple_parse_line(buffer, argv);
if (!argc)
continue;
switch (stm32mp1_get_command(argv[0], argc)) {
case DDR_CMD_HELP:
stm32mp1_do_usage();
break;
case DDR_CMD_INFO:
stm32mp1_do_info(priv,
(struct stm32mp1_ddr_config *)config,
step, argc, argv);
break;
case DDR_CMD_FREQ:
if (stm32mp1_do_freq(priv, argc, argv))
next_step = STEP_DDR_RESET;
break;
case DDR_CMD_RESET:
do_reset(NULL, 0, 0, NULL);
break;
case DDR_CMD_PARAM:
stm32mp1_do_param(step, config, argc, argv);
break;
case DDR_CMD_PRINT:
stm32mp1_do_print(priv, argc, argv);
break;
case DDR_CMD_EDIT:
stm32mp1_edit_reg(priv, argv[1], argv[2]);
break;
case DDR_CMD_GO:
next_step = STEP_RUN;
break;
case DDR_CMD_NEXT:
next_step = step + 1;
break;
case DDR_CMD_STEP:
next_step = stm32mp1_do_step(step, argc, argv);
break;
#ifdef CONFIG_STM32MP1_DDR_TESTS
case DDR_CMD_TEST:
if (!stm32mp1_check_step(step, STEP_DDR_READY))
continue;
stm32mp1_ddr_subcmd(priv, argc, argv, test, test_nb);
break;
#endif
#ifdef CONFIG_STM32MP1_DDR_TUNING
case DDR_CMD_TUNING:
if (!stm32mp1_check_step(step, STEP_DDR_READY))
continue;
stm32mp1_ddr_subcmd(priv, argc, argv,
tuning, tuning_nb);
break;
#endif
default:
break;
}
}
return next_step == STEP_DDR_RESET;
}