| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2016-2019 Intel Corporation <www.intel.com> |
| * |
| */ |
| |
| #include <common.h> |
| #include <cpu_func.h> |
| #include <dm.h> |
| #include <errno.h> |
| #include <div64.h> |
| #include <fdtdec.h> |
| #include <ram.h> |
| #include <reset.h> |
| #include "sdram_soc64.h" |
| #include <wait_bit.h> |
| #include <asm/arch/firewall.h> |
| #include <asm/arch/system_manager.h> |
| #include <asm/arch/reset_manager.h> |
| #include <asm/io.h> |
| #include <linux/sizes.h> |
| |
| #define PGTABLE_OFF 0x4000 |
| |
| u32 hmc_readl(struct altera_sdram_platdata *plat, u32 reg) |
| { |
| return readl(plat->iomhc + reg); |
| } |
| |
| u32 hmc_ecc_readl(struct altera_sdram_platdata *plat, u32 reg) |
| { |
| return readl(plat->hmc + reg); |
| } |
| |
| u32 hmc_ecc_writel(struct altera_sdram_platdata *plat, |
| u32 data, u32 reg) |
| { |
| return writel(data, plat->hmc + reg); |
| } |
| |
| u32 ddr_sch_writel(struct altera_sdram_platdata *plat, u32 data, |
| u32 reg) |
| { |
| return writel(data, plat->ddr_sch + reg); |
| } |
| |
| int emif_clear(struct altera_sdram_platdata *plat) |
| { |
| hmc_ecc_writel(plat, 0, RSTHANDSHAKECTRL); |
| |
| return wait_for_bit_le32((const void *)(plat->hmc + |
| RSTHANDSHAKESTAT), |
| DDR_HMC_RSTHANDSHAKE_MASK, |
| false, 1000, false); |
| } |
| |
| int emif_reset(struct altera_sdram_platdata *plat) |
| { |
| u32 c2s, s2c, ret; |
| |
| c2s = hmc_ecc_readl(plat, RSTHANDSHAKECTRL) & DDR_HMC_RSTHANDSHAKE_MASK; |
| s2c = hmc_ecc_readl(plat, RSTHANDSHAKESTAT) & DDR_HMC_RSTHANDSHAKE_MASK; |
| |
| debug("DDR: c2s=%08x s2c=%08x nr0=%08x nr1=%08x nr2=%08x dst=%08x\n", |
| c2s, s2c, hmc_readl(plat, NIOSRESERVED0), |
| hmc_readl(plat, NIOSRESERVED1), hmc_readl(plat, NIOSRESERVED2), |
| hmc_readl(plat, DRAMSTS)); |
| |
| if (s2c && emif_clear(plat)) { |
| printf("DDR: emif_clear() failed\n"); |
| return -1; |
| } |
| |
| debug("DDR: Triggerring emif reset\n"); |
| hmc_ecc_writel(plat, DDR_HMC_CORE2SEQ_INT_REQ, RSTHANDSHAKECTRL); |
| |
| /* if seq2core[3] = 0, we are good */ |
| ret = wait_for_bit_le32((const void *)(plat->hmc + |
| RSTHANDSHAKESTAT), |
| DDR_HMC_SEQ2CORE_INT_RESP_MASK, |
| false, 1000, false); |
| if (ret) { |
| printf("DDR: failed to get ack from EMIF\n"); |
| return ret; |
| } |
| |
| ret = emif_clear(plat); |
| if (ret) { |
| printf("DDR: emif_clear() failed\n"); |
| return ret; |
| } |
| |
| debug("DDR: %s triggered successly\n", __func__); |
| return 0; |
| } |
| |
| int poll_hmc_clock_status(void) |
| { |
| return wait_for_bit_le32((const void *)(socfpga_get_sysmgr_addr() + |
| SYSMGR_SOC64_HMC_CLK), |
| SYSMGR_HMC_CLK_STATUS_MSK, true, 1000, false); |
| } |
| |
| void sdram_clear_mem(phys_addr_t addr, phys_size_t size) |
| { |
| phys_size_t i; |
| |
| if (addr % CONFIG_SYS_CACHELINE_SIZE) { |
| printf("DDR: address 0x%llx is not cacheline size aligned.\n", |
| addr); |
| hang(); |
| } |
| |
| if (size % CONFIG_SYS_CACHELINE_SIZE) { |
| printf("DDR: size 0x%llx is not multiple of cacheline size\n", |
| size); |
| hang(); |
| } |
| |
| /* Use DC ZVA instruction to clear memory to zeros by a cache line */ |
| for (i = 0; i < size; i = i + CONFIG_SYS_CACHELINE_SIZE) { |
| asm volatile("dc zva, %0" |
| : |
| : "r"(addr) |
| : "memory"); |
| addr += CONFIG_SYS_CACHELINE_SIZE; |
| } |
| } |
| |
| void sdram_init_ecc_bits(bd_t *bd) |
| { |
| phys_size_t size, size_init; |
| phys_addr_t start_addr; |
| int bank = 0; |
| unsigned int start = get_timer(0); |
| |
| icache_enable(); |
| |
| start_addr = bd->bi_dram[0].start; |
| size = bd->bi_dram[0].size; |
| |
| /* Initialize small block for page table */ |
| memset((void *)start_addr, 0, PGTABLE_SIZE + PGTABLE_OFF); |
| gd->arch.tlb_addr = start_addr + PGTABLE_OFF; |
| gd->arch.tlb_size = PGTABLE_SIZE; |
| start_addr += PGTABLE_SIZE + PGTABLE_OFF; |
| size -= (PGTABLE_OFF + PGTABLE_SIZE); |
| dcache_enable(); |
| |
| while (1) { |
| while (size) { |
| size_init = min((phys_addr_t)SZ_1G, (phys_addr_t)size); |
| sdram_clear_mem(start_addr, size_init); |
| size -= size_init; |
| start_addr += size_init; |
| WATCHDOG_RESET(); |
| } |
| |
| bank++; |
| if (bank >= CONFIG_NR_DRAM_BANKS) |
| break; |
| |
| start_addr = bd->bi_dram[bank].start; |
| size = bd->bi_dram[bank].size; |
| } |
| |
| dcache_disable(); |
| icache_disable(); |
| |
| printf("SDRAM-ECC: Initialized success with %d ms\n", |
| (unsigned int)get_timer(start)); |
| } |
| |
| void sdram_size_check(bd_t *bd) |
| { |
| phys_size_t total_ram_check = 0; |
| phys_size_t ram_check = 0; |
| phys_addr_t start = 0; |
| int bank; |
| |
| /* Sanity check ensure correct SDRAM size specified */ |
| debug("DDR: Running SDRAM size sanity check\n"); |
| |
| for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++) { |
| start = bd->bi_dram[bank].start; |
| while (ram_check < bd->bi_dram[bank].size) { |
| ram_check += get_ram_size((void *)(start + ram_check), |
| (phys_size_t)SZ_1G); |
| } |
| total_ram_check += ram_check; |
| ram_check = 0; |
| } |
| |
| /* If the ram_size is 2GB smaller, we can assume the IO space is |
| * not mapped in. gd->ram_size is the actual size of the dram |
| * not the accessible size. |
| */ |
| if (total_ram_check != gd->ram_size) { |
| puts("DDR: SDRAM size check failed!\n"); |
| hang(); |
| } |
| |
| debug("DDR: SDRAM size check passed!\n"); |
| } |
| |
| /** |
| * sdram_calculate_size() - Calculate SDRAM size |
| * |
| * Calculate SDRAM device size based on SDRAM controller parameters. |
| * Size is specified in bytes. |
| */ |
| phys_size_t sdram_calculate_size(struct altera_sdram_platdata *plat) |
| { |
| u32 dramaddrw = hmc_readl(plat, DRAMADDRW); |
| |
| phys_size_t size = 1 << (DRAMADDRW_CFG_CS_ADDR_WIDTH(dramaddrw) + |
| DRAMADDRW_CFG_BANK_GRP_ADDR_WIDTH(dramaddrw) + |
| DRAMADDRW_CFG_BANK_ADDR_WIDTH(dramaddrw) + |
| DRAMADDRW_CFG_ROW_ADDR_WIDTH(dramaddrw) + |
| DRAMADDRW_CFG_COL_ADDR_WIDTH(dramaddrw)); |
| |
| size *= (2 << (hmc_ecc_readl(plat, DDRIOCTRL) & |
| DDR_HMC_DDRIOCTRL_IOSIZE_MSK)); |
| |
| return size; |
| } |
| |
| static int altera_sdram_ofdata_to_platdata(struct udevice *dev) |
| { |
| struct altera_sdram_platdata *plat = dev->platdata; |
| fdt_addr_t addr; |
| |
| addr = dev_read_addr_index(dev, 0); |
| if (addr == FDT_ADDR_T_NONE) |
| return -EINVAL; |
| plat->ddr_sch = (void __iomem *)addr; |
| |
| addr = dev_read_addr_index(dev, 1); |
| if (addr == FDT_ADDR_T_NONE) |
| return -EINVAL; |
| plat->iomhc = (void __iomem *)addr; |
| |
| addr = dev_read_addr_index(dev, 2); |
| if (addr == FDT_ADDR_T_NONE) |
| return -EINVAL; |
| plat->hmc = (void __iomem *)addr; |
| |
| return 0; |
| } |
| |
| static int altera_sdram_probe(struct udevice *dev) |
| { |
| int ret; |
| struct altera_sdram_priv *priv = dev_get_priv(dev); |
| |
| ret = reset_get_bulk(dev, &priv->resets); |
| if (ret) { |
| dev_err(dev, "Can't get reset: %d\n", ret); |
| return -ENODEV; |
| } |
| reset_deassert_bulk(&priv->resets); |
| |
| if (sdram_mmr_init_full(dev) != 0) { |
| puts("SDRAM init failed.\n"); |
| goto failed; |
| } |
| |
| return 0; |
| |
| failed: |
| reset_release_bulk(&priv->resets); |
| return -ENODEV; |
| } |
| |
| static int altera_sdram_get_info(struct udevice *dev, |
| struct ram_info *info) |
| { |
| struct altera_sdram_priv *priv = dev_get_priv(dev); |
| |
| info->base = priv->info.base; |
| info->size = priv->info.size; |
| |
| return 0; |
| } |
| |
| static struct ram_ops altera_sdram_ops = { |
| .get_info = altera_sdram_get_info, |
| }; |
| |
| static const struct udevice_id altera_sdram_ids[] = { |
| { .compatible = "altr,sdr-ctl-s10" }, |
| { .compatible = "intel,sdr-ctl-agilex" }, |
| { /* sentinel */ } |
| }; |
| |
| U_BOOT_DRIVER(altera_sdram) = { |
| .name = "altr_sdr_ctl", |
| .id = UCLASS_RAM, |
| .of_match = altera_sdram_ids, |
| .ops = &altera_sdram_ops, |
| .ofdata_to_platdata = altera_sdram_ofdata_to_platdata, |
| .platdata_auto_alloc_size = sizeof(struct altera_sdram_platdata), |
| .probe = altera_sdram_probe, |
| .priv_auto_alloc_size = sizeof(struct altera_sdram_priv), |
| }; |