| /* |
| * Copyright 2015 Vishnu Patekar |
| * |
| * Vishnu Patekar <vishnupatekar0510@gmail.com> |
| * |
| * This file is dual-licensed: you can use it either under the terms |
| * of the GPL or the X11 license, at your option. Note that this dual |
| * licensing only applies to this file, and not this project as a |
| * whole. |
| * |
| * a) This file is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of the |
| * License, or (at your option) any later version. |
| * |
| * This file is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * Or, alternatively, |
| * |
| * b) Permission is hereby granted, free of charge, to any person |
| * obtaining a copy of this software and associated documentation |
| * files (the "Software"), to deal in the Software without |
| * restriction, including without limitation the rights to use, |
| * copy, modify, merge, publish, distribute, sublicense, and/or |
| * sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following |
| * conditions: |
| * |
| * The above copyright notice and this permission notice shall be |
| * included in all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| */ |
| |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| |
| #include <dt-bindings/clock/sun8i-a83t-ccu.h> |
| #include <dt-bindings/clock/sun8i-de2.h> |
| #include <dt-bindings/clock/sun8i-r-ccu.h> |
| #include <dt-bindings/reset/sun8i-a83t-ccu.h> |
| #include <dt-bindings/reset/sun8i-de2.h> |
| #include <dt-bindings/reset/sun8i-r-ccu.h> |
| #include <dt-bindings/thermal/thermal.h> |
| |
| / { |
| interrupt-parent = <&gic>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu0: cpu@0 { |
| compatible = "arm,cortex-a7"; |
| device_type = "cpu"; |
| clocks = <&ccu CLK_C0CPUX>; |
| operating-points-v2 = <&cpu0_opp_table>; |
| cci-control-port = <&cci_control0>; |
| enable-method = "allwinner,sun8i-a83t-smp"; |
| reg = <0>; |
| #cooling-cells = <2>; |
| }; |
| |
| cpu1: cpu@1 { |
| compatible = "arm,cortex-a7"; |
| device_type = "cpu"; |
| clocks = <&ccu CLK_C0CPUX>; |
| operating-points-v2 = <&cpu0_opp_table>; |
| cci-control-port = <&cci_control0>; |
| enable-method = "allwinner,sun8i-a83t-smp"; |
| reg = <1>; |
| #cooling-cells = <2>; |
| }; |
| |
| cpu2: cpu@2 { |
| compatible = "arm,cortex-a7"; |
| device_type = "cpu"; |
| clocks = <&ccu CLK_C0CPUX>; |
| operating-points-v2 = <&cpu0_opp_table>; |
| cci-control-port = <&cci_control0>; |
| enable-method = "allwinner,sun8i-a83t-smp"; |
| reg = <2>; |
| #cooling-cells = <2>; |
| }; |
| |
| cpu3: cpu@3 { |
| compatible = "arm,cortex-a7"; |
| device_type = "cpu"; |
| clocks = <&ccu CLK_C0CPUX>; |
| operating-points-v2 = <&cpu0_opp_table>; |
| cci-control-port = <&cci_control0>; |
| enable-method = "allwinner,sun8i-a83t-smp"; |
| reg = <3>; |
| #cooling-cells = <2>; |
| }; |
| |
| cpu100: cpu@100 { |
| compatible = "arm,cortex-a7"; |
| device_type = "cpu"; |
| clocks = <&ccu CLK_C1CPUX>; |
| operating-points-v2 = <&cpu1_opp_table>; |
| cci-control-port = <&cci_control1>; |
| enable-method = "allwinner,sun8i-a83t-smp"; |
| reg = <0x100>; |
| #cooling-cells = <2>; |
| }; |
| |
| cpu101: cpu@101 { |
| compatible = "arm,cortex-a7"; |
| device_type = "cpu"; |
| clocks = <&ccu CLK_C1CPUX>; |
| operating-points-v2 = <&cpu1_opp_table>; |
| cci-control-port = <&cci_control1>; |
| enable-method = "allwinner,sun8i-a83t-smp"; |
| reg = <0x101>; |
| #cooling-cells = <2>; |
| }; |
| |
| cpu102: cpu@102 { |
| compatible = "arm,cortex-a7"; |
| device_type = "cpu"; |
| clocks = <&ccu CLK_C1CPUX>; |
| operating-points-v2 = <&cpu1_opp_table>; |
| cci-control-port = <&cci_control1>; |
| enable-method = "allwinner,sun8i-a83t-smp"; |
| reg = <0x102>; |
| #cooling-cells = <2>; |
| }; |
| |
| cpu103: cpu@103 { |
| compatible = "arm,cortex-a7"; |
| device_type = "cpu"; |
| clocks = <&ccu CLK_C1CPUX>; |
| operating-points-v2 = <&cpu1_opp_table>; |
| cci-control-port = <&cci_control1>; |
| enable-method = "allwinner,sun8i-a83t-smp"; |
| reg = <0x103>; |
| #cooling-cells = <2>; |
| }; |
| }; |
| |
| timer { |
| compatible = "arm,armv7-timer"; |
| interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; |
| }; |
| |
| clocks { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| /* TODO: PRCM block has a mux for this. */ |
| osc24M: osc24M_clk { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <24000000>; |
| clock-accuracy = <50000>; |
| clock-output-names = "osc24M"; |
| }; |
| |
| /* |
| * This is called "internal OSC" in some places. |
| * It is an internal RC-based oscillator. |
| * TODO: Its controls are in the PRCM block. |
| */ |
| osc16M: osc16M_clk { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <16000000>; |
| clock-output-names = "osc16M"; |
| }; |
| |
| osc16Md512: osc16Md512_clk { |
| #clock-cells = <0>; |
| compatible = "fixed-factor-clock"; |
| clock-div = <512>; |
| clock-mult = <1>; |
| clocks = <&osc16M>; |
| clock-output-names = "osc16M-d512"; |
| }; |
| }; |
| |
| de: display-engine { |
| compatible = "allwinner,sun8i-a83t-display-engine"; |
| allwinner,pipelines = <&mixer0>, <&mixer1>; |
| status = "disabled"; |
| }; |
| |
| cpu0_opp_table: opp-table-cluster0 { |
| compatible = "operating-points-v2"; |
| opp-shared; |
| |
| opp-480000000 { |
| opp-hz = /bits/ 64 <480000000>; |
| opp-microvolt = <840000>; |
| clock-latency-ns = <244144>; /* 8 32k periods */ |
| }; |
| |
| opp-600000000 { |
| opp-hz = /bits/ 64 <600000000>; |
| opp-microvolt = <840000>; |
| clock-latency-ns = <244144>; /* 8 32k periods */ |
| }; |
| |
| opp-720000000 { |
| opp-hz = /bits/ 64 <720000000>; |
| opp-microvolt = <840000>; |
| clock-latency-ns = <244144>; /* 8 32k periods */ |
| }; |
| |
| opp-864000000 { |
| opp-hz = /bits/ 64 <864000000>; |
| opp-microvolt = <840000>; |
| clock-latency-ns = <244144>; /* 8 32k periods */ |
| }; |
| |
| opp-912000000 { |
| opp-hz = /bits/ 64 <912000000>; |
| opp-microvolt = <840000>; |
| clock-latency-ns = <244144>; /* 8 32k periods */ |
| }; |
| |
| opp-1008000000 { |
| opp-hz = /bits/ 64 <1008000000>; |
| opp-microvolt = <840000>; |
| clock-latency-ns = <244144>; /* 8 32k periods */ |
| }; |
| |
| opp-1128000000 { |
| opp-hz = /bits/ 64 <1128000000>; |
| opp-microvolt = <840000>; |
| clock-latency-ns = <244144>; /* 8 32k periods */ |
| }; |
| |
| opp-1200000000 { |
| opp-hz = /bits/ 64 <1200000000>; |
| opp-microvolt = <840000>; |
| clock-latency-ns = <244144>; /* 8 32k periods */ |
| }; |
| }; |
| |
| cpu1_opp_table: opp-table-cluster1 { |
| compatible = "operating-points-v2"; |
| opp-shared; |
| |
| opp-480000000 { |
| opp-hz = /bits/ 64 <480000000>; |
| opp-microvolt = <840000>; |
| clock-latency-ns = <244144>; /* 8 32k periods */ |
| }; |
| |
| opp-600000000 { |
| opp-hz = /bits/ 64 <600000000>; |
| opp-microvolt = <840000>; |
| clock-latency-ns = <244144>; /* 8 32k periods */ |
| }; |
| |
| opp-720000000 { |
| opp-hz = /bits/ 64 <720000000>; |
| opp-microvolt = <840000>; |
| clock-latency-ns = <244144>; /* 8 32k periods */ |
| }; |
| |
| opp-864000000 { |
| opp-hz = /bits/ 64 <864000000>; |
| opp-microvolt = <840000>; |
| clock-latency-ns = <244144>; /* 8 32k periods */ |
| }; |
| |
| opp-912000000 { |
| opp-hz = /bits/ 64 <912000000>; |
| opp-microvolt = <840000>; |
| clock-latency-ns = <244144>; /* 8 32k periods */ |
| }; |
| |
| opp-1008000000 { |
| opp-hz = /bits/ 64 <1008000000>; |
| opp-microvolt = <840000>; |
| clock-latency-ns = <244144>; /* 8 32k periods */ |
| }; |
| |
| opp-1128000000 { |
| opp-hz = /bits/ 64 <1128000000>; |
| opp-microvolt = <840000>; |
| clock-latency-ns = <244144>; /* 8 32k periods */ |
| }; |
| |
| opp-1200000000 { |
| opp-hz = /bits/ 64 <1200000000>; |
| opp-microvolt = <840000>; |
| clock-latency-ns = <244144>; /* 8 32k periods */ |
| }; |
| }; |
| |
| soc { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| display_clocks: clock@1000000 { |
| compatible = "allwinner,sun8i-a83t-de2-clk"; |
| reg = <0x01000000 0x10000>; |
| clocks = <&ccu CLK_BUS_DE>, |
| <&ccu CLK_PLL_DE>; |
| clock-names = "bus", |
| "mod"; |
| resets = <&ccu RST_BUS_DE>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| }; |
| |
| rotate: rotate@1020000 { |
| compatible = "allwinner,sun8i-a83t-de2-rotate"; |
| reg = <0x1020000 0x10000>; |
| interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&display_clocks CLK_BUS_ROT>, |
| <&display_clocks CLK_ROT>; |
| clock-names = "bus", |
| "mod"; |
| resets = <&display_clocks RST_ROT>; |
| }; |
| |
| mixer0: mixer@1100000 { |
| compatible = "allwinner,sun8i-a83t-de2-mixer-0"; |
| reg = <0x01100000 0x100000>; |
| clocks = <&display_clocks CLK_BUS_MIXER0>, |
| <&display_clocks CLK_MIXER0>; |
| clock-names = "bus", |
| "mod"; |
| resets = <&display_clocks RST_MIXER0>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| mixer0_out: port@1 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <1>; |
| |
| mixer0_out_tcon0: endpoint@0 { |
| reg = <0>; |
| remote-endpoint = <&tcon0_in_mixer0>; |
| }; |
| |
| mixer0_out_tcon1: endpoint@1 { |
| reg = <1>; |
| remote-endpoint = <&tcon1_in_mixer0>; |
| }; |
| }; |
| }; |
| }; |
| |
| mixer1: mixer@1200000 { |
| compatible = "allwinner,sun8i-a83t-de2-mixer-1"; |
| reg = <0x01200000 0x100000>; |
| clocks = <&display_clocks CLK_BUS_MIXER1>, |
| <&display_clocks CLK_MIXER1>; |
| clock-names = "bus", |
| "mod"; |
| resets = <&display_clocks RST_WB>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| mixer1_out: port@1 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <1>; |
| |
| mixer1_out_tcon0: endpoint@0 { |
| reg = <0>; |
| remote-endpoint = <&tcon0_in_mixer1>; |
| }; |
| |
| mixer1_out_tcon1: endpoint@1 { |
| reg = <1>; |
| remote-endpoint = <&tcon1_in_mixer1>; |
| }; |
| }; |
| }; |
| }; |
| |
| cpucfg@1700000 { |
| compatible = "allwinner,sun8i-a83t-cpucfg"; |
| reg = <0x01700000 0x400>; |
| }; |
| |
| cci@1790000 { |
| compatible = "arm,cci-400"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x01790000 0x10000>; |
| ranges = <0x0 0x01790000 0x10000>; |
| |
| cci_control0: slave-if@4000 { |
| compatible = "arm,cci-400-ctrl-if"; |
| interface-type = "ace"; |
| reg = <0x4000 0x1000>; |
| }; |
| |
| cci_control1: slave-if@5000 { |
| compatible = "arm,cci-400-ctrl-if"; |
| interface-type = "ace"; |
| reg = <0x5000 0x1000>; |
| }; |
| |
| pmu@9000 { |
| compatible = "arm,cci-400-pmu,r1"; |
| reg = <0x9000 0x5000>; |
| interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| |
| syscon: syscon@1c00000 { |
| compatible = "allwinner,sun8i-a83t-system-controller", |
| "syscon"; |
| reg = <0x01c00000 0x1000>; |
| }; |
| |
| dma: dma-controller@1c02000 { |
| compatible = "allwinner,sun8i-a83t-dma"; |
| reg = <0x01c02000 0x1000>; |
| interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_DMA>; |
| resets = <&ccu RST_BUS_DMA>; |
| #dma-cells = <1>; |
| }; |
| |
| tcon0: lcd-controller@1c0c000 { |
| compatible = "allwinner,sun8i-a83t-tcon-lcd"; |
| reg = <0x01c0c000 0x1000>; |
| interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>; |
| clock-names = "ahb", "tcon-ch0"; |
| clock-output-names = "tcon-data-clock"; |
| #clock-cells = <0>; |
| resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>; |
| reset-names = "lcd", "lvds"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| tcon0_in: port@0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0>; |
| |
| tcon0_in_mixer0: endpoint@0 { |
| reg = <0>; |
| remote-endpoint = <&mixer0_out_tcon0>; |
| }; |
| |
| tcon0_in_mixer1: endpoint@1 { |
| reg = <1>; |
| remote-endpoint = <&mixer1_out_tcon0>; |
| }; |
| }; |
| |
| tcon0_out: port@1 { |
| reg = <1>; |
| }; |
| }; |
| }; |
| |
| tcon1: lcd-controller@1c0d000 { |
| compatible = "allwinner,sun8i-a83t-tcon-tv"; |
| reg = <0x01c0d000 0x1000>; |
| interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_TCON1>, <&ccu CLK_TCON1>; |
| clock-names = "ahb", "tcon-ch1"; |
| resets = <&ccu RST_BUS_TCON1>; |
| reset-names = "lcd"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| tcon1_in: port@0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0>; |
| |
| tcon1_in_mixer0: endpoint@0 { |
| reg = <0>; |
| remote-endpoint = <&mixer0_out_tcon1>; |
| }; |
| |
| tcon1_in_mixer1: endpoint@1 { |
| reg = <1>; |
| remote-endpoint = <&mixer1_out_tcon1>; |
| }; |
| }; |
| |
| tcon1_out: port@1 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <1>; |
| |
| tcon1_out_hdmi: endpoint@1 { |
| reg = <1>; |
| remote-endpoint = <&hdmi_in_tcon1>; |
| }; |
| }; |
| }; |
| }; |
| |
| mmc0: mmc@1c0f000 { |
| compatible = "allwinner,sun8i-a83t-mmc", |
| "allwinner,sun7i-a20-mmc"; |
| reg = <0x01c0f000 0x1000>; |
| clocks = <&ccu CLK_BUS_MMC0>, |
| <&ccu CLK_MMC0>, |
| <&ccu CLK_MMC0_OUTPUT>, |
| <&ccu CLK_MMC0_SAMPLE>; |
| clock-names = "ahb", |
| "mmc", |
| "output", |
| "sample"; |
| resets = <&ccu RST_BUS_MMC0>; |
| reset-names = "ahb"; |
| interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| mmc1: mmc@1c10000 { |
| compatible = "allwinner,sun8i-a83t-mmc", |
| "allwinner,sun7i-a20-mmc"; |
| reg = <0x01c10000 0x1000>; |
| clocks = <&ccu CLK_BUS_MMC1>, |
| <&ccu CLK_MMC1>, |
| <&ccu CLK_MMC1_OUTPUT>, |
| <&ccu CLK_MMC1_SAMPLE>; |
| clock-names = "ahb", |
| "mmc", |
| "output", |
| "sample"; |
| resets = <&ccu RST_BUS_MMC1>; |
| reset-names = "ahb"; |
| interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&mmc1_pins>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| mmc2: mmc@1c11000 { |
| compatible = "allwinner,sun8i-a83t-emmc"; |
| reg = <0x01c11000 0x1000>; |
| clocks = <&ccu CLK_BUS_MMC2>, |
| <&ccu CLK_MMC2>, |
| <&ccu CLK_MMC2_OUTPUT>, |
| <&ccu CLK_MMC2_SAMPLE>; |
| clock-names = "ahb", |
| "mmc", |
| "output", |
| "sample"; |
| resets = <&ccu RST_BUS_MMC2>; |
| reset-names = "ahb"; |
| interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| sid: eeprom@1c14000 { |
| compatible = "allwinner,sun8i-a83t-sid"; |
| reg = <0x1c14000 0x400>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| ths_calibration: thermal-sensor-calibration@34 { |
| reg = <0x34 8>; |
| }; |
| }; |
| |
| crypto: crypto@1c15000 { |
| compatible = "allwinner,sun8i-a83t-crypto"; |
| reg = <0x01c15000 0x1000>; |
| interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; |
| resets = <&ccu RST_BUS_SS>; |
| clocks = <&ccu CLK_BUS_SS>, <&ccu CLK_SS>; |
| clock-names = "bus", "mod"; |
| }; |
| |
| msgbox: mailbox@1c17000 { |
| compatible = "allwinner,sun8i-a83t-msgbox", |
| "allwinner,sun6i-a31-msgbox"; |
| reg = <0x01c17000 0x1000>; |
| clocks = <&ccu CLK_BUS_MSGBOX>; |
| resets = <&ccu RST_BUS_MSGBOX>; |
| interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; |
| #mbox-cells = <1>; |
| }; |
| |
| usb_otg: usb@1c19000 { |
| compatible = "allwinner,sun8i-a83t-musb", |
| "allwinner,sun8i-a33-musb"; |
| reg = <0x01c19000 0x0400>; |
| clocks = <&ccu CLK_BUS_OTG>; |
| resets = <&ccu RST_BUS_OTG>; |
| interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "mc"; |
| phys = <&usbphy 0>; |
| phy-names = "usb"; |
| extcon = <&usbphy 0>; |
| dr_mode = "otg"; |
| status = "disabled"; |
| }; |
| |
| usbphy: phy@1c19400 { |
| compatible = "allwinner,sun8i-a83t-usb-phy"; |
| reg = <0x01c19400 0x10>, |
| <0x01c1a800 0x14>, |
| <0x01c1b800 0x14>; |
| reg-names = "phy_ctrl", |
| "pmu1", |
| "pmu2"; |
| clocks = <&ccu CLK_USB_PHY0>, |
| <&ccu CLK_USB_PHY1>, |
| <&ccu CLK_USB_HSIC>, |
| <&ccu CLK_USB_HSIC_12M>; |
| clock-names = "usb0_phy", |
| "usb1_phy", |
| "usb2_phy", |
| "usb2_hsic_12M"; |
| resets = <&ccu RST_USB_PHY0>, |
| <&ccu RST_USB_PHY1>, |
| <&ccu RST_USB_HSIC>; |
| reset-names = "usb0_reset", |
| "usb1_reset", |
| "usb2_reset"; |
| status = "disabled"; |
| #phy-cells = <1>; |
| }; |
| |
| ehci0: usb@1c1a000 { |
| compatible = "allwinner,sun8i-a83t-ehci", |
| "generic-ehci"; |
| reg = <0x01c1a000 0x100>; |
| interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_EHCI0>; |
| resets = <&ccu RST_BUS_EHCI0>; |
| phys = <&usbphy 1>; |
| phy-names = "usb"; |
| status = "disabled"; |
| }; |
| |
| ohci0: usb@1c1a400 { |
| compatible = "allwinner,sun8i-a83t-ohci", |
| "generic-ohci"; |
| reg = <0x01c1a400 0x100>; |
| interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_OHCI0>, <&ccu CLK_USB_OHCI0>; |
| resets = <&ccu RST_BUS_OHCI0>; |
| phys = <&usbphy 1>; |
| phy-names = "usb"; |
| status = "disabled"; |
| }; |
| |
| ehci1: usb@1c1b000 { |
| compatible = "allwinner,sun8i-a83t-ehci", |
| "generic-ehci"; |
| reg = <0x01c1b000 0x100>; |
| interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_EHCI1>; |
| resets = <&ccu RST_BUS_EHCI1>; |
| phys = <&usbphy 2>; |
| phy-names = "usb"; |
| status = "disabled"; |
| }; |
| |
| ccu: clock@1c20000 { |
| compatible = "allwinner,sun8i-a83t-ccu"; |
| reg = <0x01c20000 0x400>; |
| clocks = <&osc24M>, <&osc16Md512>; |
| clock-names = "hosc", "losc"; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| }; |
| |
| pio: pinctrl@1c20800 { |
| compatible = "allwinner,sun8i-a83t-pinctrl"; |
| interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0x01c20800 0x400>; |
| clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc16Md512>; |
| clock-names = "apb", "hosc", "losc"; |
| gpio-controller; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| #gpio-cells = <3>; |
| |
| /omit-if-no-ref/ |
| csi_8bit_parallel_pins: csi-8bit-parallel-pins { |
| pins = "PE0", "PE2", "PE3", "PE6", "PE7", |
| "PE8", "PE9", "PE10", "PE11", |
| "PE12", "PE13"; |
| function = "csi"; |
| }; |
| |
| /omit-if-no-ref/ |
| csi_mclk_pin: csi-mclk-pin { |
| pins = "PE1"; |
| function = "csi"; |
| }; |
| |
| emac_rgmii_pins: emac-rgmii-pins { |
| pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", |
| "PD11", "PD12", "PD13", "PD14", "PD18", |
| "PD19", "PD21", "PD22", "PD23"; |
| function = "gmac"; |
| /* |
| * data lines in RGMII mode use DDR mode |
| * and need a higher signal drive strength |
| */ |
| drive-strength = <40>; |
| }; |
| |
| hdmi_pins: hdmi-pins { |
| pins = "PH6", "PH7", "PH8"; |
| function = "hdmi"; |
| }; |
| |
| i2c0_pins: i2c0-pins { |
| pins = "PH0", "PH1"; |
| function = "i2c0"; |
| }; |
| |
| i2c1_pins: i2c1-pins { |
| pins = "PH2", "PH3"; |
| function = "i2c1"; |
| }; |
| |
| /omit-if-no-ref/ |
| i2c2_pe_pins: i2c2-pe-pins { |
| pins = "PE14", "PE15"; |
| function = "i2c2"; |
| }; |
| |
| i2c2_ph_pins: i2c2-ph-pins { |
| pins = "PH4", "PH5"; |
| function = "i2c2"; |
| }; |
| |
| i2s1_pins: i2s1-pins { |
| /* I2S1 does not have external MCLK pin */ |
| pins = "PG10", "PG11", "PG12", "PG13"; |
| function = "i2s1"; |
| }; |
| |
| lcd_lvds_pins: lcd-lvds-pins { |
| pins = "PD18", "PD19", "PD20", "PD21", "PD22", |
| "PD23", "PD24", "PD25", "PD26", "PD27"; |
| function = "lvds0"; |
| }; |
| |
| mmc0_pins: mmc0-pins { |
| pins = "PF0", "PF1", "PF2", |
| "PF3", "PF4", "PF5"; |
| function = "mmc0"; |
| drive-strength = <30>; |
| bias-pull-up; |
| }; |
| |
| mmc1_pins: mmc1-pins { |
| pins = "PG0", "PG1", "PG2", |
| "PG3", "PG4", "PG5"; |
| function = "mmc1"; |
| drive-strength = <30>; |
| bias-pull-up; |
| }; |
| |
| mmc2_8bit_emmc_pins: mmc2-8bit-emmc-pins { |
| pins = "PC5", "PC6", "PC8", "PC9", |
| "PC10", "PC11", "PC12", "PC13", |
| "PC14", "PC15", "PC16"; |
| function = "mmc2"; |
| drive-strength = <30>; |
| bias-pull-up; |
| }; |
| |
| pwm_pin: pwm-pin { |
| pins = "PD28"; |
| function = "pwm"; |
| }; |
| |
| spdif_tx_pin: spdif-tx-pin { |
| pins = "PE18"; |
| function = "spdif"; |
| }; |
| |
| uart0_pb_pins: uart0-pb-pins { |
| pins = "PB9", "PB10"; |
| function = "uart0"; |
| }; |
| |
| uart0_pf_pins: uart0-pf-pins { |
| pins = "PF2", "PF4"; |
| function = "uart0"; |
| }; |
| |
| uart1_pins: uart1-pins { |
| pins = "PG6", "PG7"; |
| function = "uart1"; |
| }; |
| |
| uart1_rts_cts_pins: uart1-rts-cts-pins { |
| pins = "PG8", "PG9"; |
| function = "uart1"; |
| }; |
| |
| /omit-if-no-ref/ |
| uart2_pb_pins: uart2-pb-pins { |
| pins = "PB0", "PB1"; |
| function = "uart2"; |
| }; |
| }; |
| |
| timer@1c20c00 { |
| compatible = "allwinner,sun8i-a23-timer"; |
| reg = <0x01c20c00 0xa0>; |
| interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&osc24M>; |
| }; |
| |
| watchdog@1c20ca0 { |
| compatible = "allwinner,sun6i-a31-wdt"; |
| reg = <0x01c20ca0 0x20>; |
| interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&osc24M>; |
| }; |
| |
| spdif: spdif@1c21000 { |
| #sound-dai-cells = <0>; |
| compatible = "allwinner,sun8i-a83t-spdif", |
| "allwinner,sun8i-h3-spdif"; |
| reg = <0x01c21000 0x400>; |
| interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>; |
| resets = <&ccu RST_BUS_SPDIF>; |
| clock-names = "apb", "spdif"; |
| dmas = <&dma 2>; |
| dma-names = "tx"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spdif_tx_pin>; |
| status = "disabled"; |
| }; |
| |
| i2s0: i2s@1c22000 { |
| #sound-dai-cells = <0>; |
| compatible = "allwinner,sun8i-a83t-i2s"; |
| reg = <0x01c22000 0x400>; |
| interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>; |
| clock-names = "apb", "mod"; |
| dmas = <&dma 3>, <&dma 3>; |
| resets = <&ccu RST_BUS_I2S0>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| i2s1: i2s@1c22400 { |
| #sound-dai-cells = <0>; |
| compatible = "allwinner,sun8i-a83t-i2s"; |
| reg = <0x01c22400 0x400>; |
| interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>; |
| clock-names = "apb", "mod"; |
| dmas = <&dma 4>, <&dma 4>; |
| resets = <&ccu RST_BUS_I2S1>; |
| dma-names = "rx", "tx"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2s1_pins>; |
| status = "disabled"; |
| }; |
| |
| i2s2: i2s@1c22800 { |
| #sound-dai-cells = <0>; |
| compatible = "allwinner,sun8i-a83t-i2s"; |
| reg = <0x01c22800 0x400>; |
| interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>; |
| clock-names = "apb", "mod"; |
| dmas = <&dma 27>; |
| resets = <&ccu RST_BUS_I2S2>; |
| dma-names = "tx"; |
| status = "disabled"; |
| }; |
| |
| pwm: pwm@1c21400 { |
| compatible = "allwinner,sun8i-a83t-pwm", |
| "allwinner,sun8i-h3-pwm"; |
| reg = <0x01c21400 0x400>; |
| clocks = <&osc24M>; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| uart0: serial@1c28000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x01c28000 0x400>; |
| interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&ccu CLK_BUS_UART0>; |
| resets = <&ccu RST_BUS_UART0>; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@1c28400 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x01c28400 0x400>; |
| interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&ccu CLK_BUS_UART1>; |
| resets = <&ccu RST_BUS_UART1>; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@1c28800 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x01c28800 0x400>; |
| interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&ccu CLK_BUS_UART2>; |
| resets = <&ccu RST_BUS_UART2>; |
| status = "disabled"; |
| }; |
| |
| uart3: serial@1c28c00 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x01c28c00 0x400>; |
| interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&ccu CLK_BUS_UART3>; |
| resets = <&ccu RST_BUS_UART3>; |
| status = "disabled"; |
| }; |
| |
| uart4: serial@1c29000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x01c29000 0x400>; |
| interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&ccu CLK_BUS_UART4>; |
| resets = <&ccu RST_BUS_UART4>; |
| status = "disabled"; |
| }; |
| |
| i2c0: i2c@1c2ac00 { |
| compatible = "allwinner,sun8i-a83t-i2c", |
| "allwinner,sun6i-a31-i2c"; |
| reg = <0x01c2ac00 0x400>; |
| interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_I2C0>; |
| resets = <&ccu RST_BUS_I2C0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c0_pins>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| i2c1: i2c@1c2b000 { |
| compatible = "allwinner,sun8i-a83t-i2c", |
| "allwinner,sun6i-a31-i2c"; |
| reg = <0x01c2b000 0x400>; |
| interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_I2C1>; |
| resets = <&ccu RST_BUS_I2C1>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c1_pins>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| i2c2: i2c@1c2b400 { |
| compatible = "allwinner,sun8i-a83t-i2c", |
| "allwinner,sun6i-a31-i2c"; |
| reg = <0x01c2b400 0x400>; |
| interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_I2C2>; |
| resets = <&ccu RST_BUS_I2C2>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| emac: ethernet@1c30000 { |
| compatible = "allwinner,sun8i-a83t-emac"; |
| syscon = <&syscon>; |
| reg = <0x01c30000 0x104>; |
| interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "macirq"; |
| clocks = <&ccu CLK_BUS_EMAC>; |
| clock-names = "stmmaceth"; |
| resets = <&ccu RST_BUS_EMAC>; |
| reset-names = "stmmaceth"; |
| status = "disabled"; |
| |
| mdio: mdio { |
| compatible = "snps,dwmac-mdio"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| }; |
| |
| gic: interrupt-controller@1c81000 { |
| compatible = "arm,gic-400"; |
| reg = <0x01c81000 0x1000>, |
| <0x01c82000 0x2000>, |
| <0x01c84000 0x2000>, |
| <0x01c86000 0x2000>; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; |
| }; |
| |
| csi: camera@1cb0000 { |
| compatible = "allwinner,sun8i-a83t-csi"; |
| reg = <0x01cb0000 0x1000>; |
| interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_CSI>, |
| <&ccu CLK_CSI_SCLK>, |
| <&ccu CLK_DRAM_CSI>; |
| clock-names = "bus", "mod", "ram"; |
| resets = <&ccu RST_BUS_CSI>; |
| status = "disabled"; |
| }; |
| |
| hdmi: hdmi@1ee0000 { |
| compatible = "allwinner,sun8i-a83t-dw-hdmi"; |
| reg = <0x01ee0000 0x10000>; |
| reg-io-width = <1>; |
| interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>, |
| <&ccu CLK_HDMI>; |
| clock-names = "iahb", "isfr", "tmds"; |
| resets = <&ccu RST_BUS_HDMI1>; |
| reset-names = "ctrl"; |
| phys = <&hdmi_phy>; |
| phy-names = "phy"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hdmi_pins>; |
| status = "disabled"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| hdmi_in: port@0 { |
| reg = <0>; |
| |
| hdmi_in_tcon1: endpoint { |
| remote-endpoint = <&tcon1_out_hdmi>; |
| }; |
| }; |
| |
| hdmi_out: port@1 { |
| reg = <1>; |
| }; |
| }; |
| }; |
| |
| hdmi_phy: hdmi-phy@1ef0000 { |
| compatible = "allwinner,sun8i-a83t-hdmi-phy"; |
| reg = <0x01ef0000 0x10000>; |
| clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>; |
| clock-names = "bus", "mod"; |
| resets = <&ccu RST_BUS_HDMI0>; |
| reset-names = "phy"; |
| #phy-cells = <0>; |
| }; |
| |
| r_intc: interrupt-controller@1f00c00 { |
| compatible = "allwinner,sun8i-a83t-r-intc", |
| "allwinner,sun6i-a31-r-intc"; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| reg = <0x01f00c00 0x400>; |
| interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| r_ccu: clock@1f01400 { |
| compatible = "allwinner,sun8i-a83t-r-ccu"; |
| reg = <0x01f01400 0x400>; |
| clocks = <&osc24M>, <&osc16Md512>, <&osc16M>, |
| <&ccu CLK_PLL_PERIPH>; |
| clock-names = "hosc", "losc", "iosc", "pll-periph"; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| }; |
| |
| r_cpucfg@1f01c00 { |
| compatible = "allwinner,sun8i-a83t-r-cpucfg"; |
| reg = <0x1f01c00 0x400>; |
| }; |
| |
| r_cir: ir@1f02000 { |
| compatible = "allwinner,sun8i-a83t-ir", |
| "allwinner,sun6i-a31-ir"; |
| clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>; |
| clock-names = "apb", "ir"; |
| resets = <&r_ccu RST_APB0_IR>; |
| interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0x01f02000 0x400>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&r_cir_pin>; |
| status = "disabled"; |
| }; |
| |
| r_lradc: lradc@1f03c00 { |
| compatible = "allwinner,sun8i-a83t-r-lradc"; |
| reg = <0x01f03c00 0x100>; |
| interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| r_pio: pinctrl@1f02c00 { |
| compatible = "allwinner,sun8i-a83t-r-pinctrl"; |
| reg = <0x01f02c00 0x400>; |
| interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>, |
| <&osc16Md512>; |
| clock-names = "apb", "hosc", "losc"; |
| gpio-controller; |
| #gpio-cells = <3>; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| |
| r_cir_pin: r-cir-pin { |
| pins = "PL12"; |
| function = "s_cir_rx"; |
| }; |
| |
| r_rsb_pins: r-rsb-pins { |
| pins = "PL0", "PL1"; |
| function = "s_rsb"; |
| drive-strength = <20>; |
| bias-pull-up; |
| }; |
| }; |
| |
| r_rsb: rsb@1f03400 { |
| compatible = "allwinner,sun8i-a83t-rsb", |
| "allwinner,sun8i-a23-rsb"; |
| reg = <0x01f03400 0x400>; |
| interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&r_ccu CLK_APB0_RSB>; |
| clock-frequency = <3000000>; |
| resets = <&r_ccu RST_APB0_RSB>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&r_rsb_pins>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| ths: thermal-sensor@1f04000 { |
| compatible = "allwinner,sun8i-a83t-ths"; |
| reg = <0x01f04000 0x100>; |
| interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; |
| nvmem-cells = <&ths_calibration>; |
| nvmem-cell-names = "calibration"; |
| #thermal-sensor-cells = <1>; |
| }; |
| }; |
| |
| thermal-zones { |
| cpu0_thermal: cpu0-thermal { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-sensors = <&ths 0>; |
| |
| trips { |
| cpu0_hot: cpu-hot { |
| temperature = <80000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu0_very_hot: cpu-very-hot { |
| temperature = <100000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| |
| cooling-maps { |
| cpu-hot-limit { |
| trip = <&cpu0_hot>; |
| cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| }; |
| }; |
| |
| cpu1_thermal: cpu1-thermal { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-sensors = <&ths 1>; |
| |
| trips { |
| cpu1_hot: cpu-hot { |
| temperature = <80000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu1_very_hot: cpu-very-hot { |
| temperature = <100000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| |
| cooling-maps { |
| cpu-hot-limit { |
| trip = <&cpu1_hot>; |
| cooling-device = <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| }; |
| }; |
| |
| gpu_thermal: gpu-thermal { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-sensors = <&ths 2>; |
| }; |
| }; |
| }; |