blob: 3d22f2019e998a932997a3da204bef48e67a846f [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* Novena SPL
*
* Copyright (C) 2014 Marek Vasut <marex@denx.de>
*/
#include <common.h>
#include <clock_legacy.h>
#include <init.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/iomux.h>
#include <asm/arch/mx6-ddr.h>
#include <asm/arch/mx6-pins.h>
#include <asm/arch/sys_proto.h>
#include <asm/gpio.h>
#include <asm/mach-imx/boot_mode.h>
#include <asm/mach-imx/iomux-v3.h>
#include <asm/mach-imx/mxc_i2c.h>
#include <asm/arch/crm_regs.h>
#include <i2c.h>
#include <mmc.h>
#include <fsl_esdhc_imx.h>
#include <spl.h>
#include <linux/delay.h>
#include <asm/arch/mx6-ddr.h>
#include "novena.h"
#define UART_PAD_CTRL \
(PAD_CTL_PKE | PAD_CTL_PUE | \
PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
#define USDHC_PAD_CTRL \
(PAD_CTL_PKE | PAD_CTL_PUE | \
PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \
PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
#define ENET_PAD_CTRL \
(PAD_CTL_PKE | PAD_CTL_PUE | \
PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
#define ENET_PHY_CFG_PAD_CTRL \
(PAD_CTL_PKE | PAD_CTL_PUE | \
PAD_CTL_PUS_22K_UP | PAD_CTL_HYS)
#define RGMII_PAD_CTRL \
(PAD_CTL_PKE | PAD_CTL_PUE | \
PAD_CTL_PUS_100K_UP | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
#define SPI_PAD_CTRL \
(PAD_CTL_HYS | \
PAD_CTL_PUS_100K_DOWN | PAD_CTL_SPEED_MED | \
PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
#define I2C_PAD_CTRL \
(PAD_CTL_PKE | PAD_CTL_PUE | \
PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_LOW | \
PAD_CTL_DSE_240ohm | PAD_CTL_HYS | \
PAD_CTL_ODE)
#define BUTTON_PAD_CTRL \
(PAD_CTL_PKE | PAD_CTL_PUE | \
PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
/*
* Audio
*/
static iomux_v3_cfg_t audio_pads[] = {
/* AUD_PWRON */
MX6_PAD_DISP0_DAT23__GPIO5_IO17 | MUX_PAD_CTRL(NO_PAD_CTRL),
};
static void novena_spl_setup_iomux_audio(void)
{
imx_iomux_v3_setup_multiple_pads(audio_pads, ARRAY_SIZE(audio_pads));
gpio_direction_output(NOVENA_AUDIO_PWRON, 1);
}
/*
* ENET
*/
static iomux_v3_cfg_t enet_pads1[] = {
MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6_PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(RGMII_PAD_CTRL),
MX6_PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(RGMII_PAD_CTRL),
MX6_PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(RGMII_PAD_CTRL),
MX6_PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(RGMII_PAD_CTRL),
MX6_PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(RGMII_PAD_CTRL),
MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(RGMII_PAD_CTRL),
MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL),
/* pin 35, PHY_AD2 */
MX6_PAD_RGMII_RXC__GPIO6_IO30 | MUX_PAD_CTRL(ENET_PHY_CFG_PAD_CTRL),
/* pin 32, MODE0 */
MX6_PAD_RGMII_RD0__GPIO6_IO25 | MUX_PAD_CTRL(ENET_PHY_CFG_PAD_CTRL),
/* pin 31, MODE1 */
MX6_PAD_RGMII_RD1__GPIO6_IO27 | MUX_PAD_CTRL(ENET_PHY_CFG_PAD_CTRL),
/* pin 28, MODE2 */
MX6_PAD_RGMII_RD2__GPIO6_IO28 | MUX_PAD_CTRL(ENET_PHY_CFG_PAD_CTRL),
/* pin 27, MODE3 */
MX6_PAD_RGMII_RD3__GPIO6_IO29 | MUX_PAD_CTRL(ENET_PHY_CFG_PAD_CTRL),
/* pin 33, CLK125_EN */
MX6_PAD_RGMII_RX_CTL__GPIO6_IO24 | MUX_PAD_CTRL(ENET_PHY_CFG_PAD_CTRL),
/* pin 42 PHY nRST */
MX6_PAD_EIM_D23__GPIO3_IO23 | MUX_PAD_CTRL(NO_PAD_CTRL),
};
static iomux_v3_cfg_t enet_pads2[] = {
MX6_PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(RGMII_PAD_CTRL),
MX6_PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(RGMII_PAD_CTRL),
MX6_PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(RGMII_PAD_CTRL),
MX6_PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(RGMII_PAD_CTRL),
MX6_PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(RGMII_PAD_CTRL),
MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(RGMII_PAD_CTRL),
};
static void novena_spl_setup_iomux_enet(void)
{
imx_iomux_v3_setup_multiple_pads(enet_pads1, ARRAY_SIZE(enet_pads1));
/* Assert Ethernet PHY nRST */
gpio_direction_output(IMX_GPIO_NR(3, 23), 0);
/*
* Use imx6 internal pull-ups to drive PHY mode pins during PHY reset
* de-assertion. The intention is to use weak signal drivers (pull-ups)
* to prevent the conflict between PHY pins becoming outputs after
* reset and imx6 still driving the pins. The issue is described in PHY
* datasheet, p.14
*/
gpio_direction_input(IMX_GPIO_NR(6, 30)); /* PHY_AD2 = 1 */
gpio_direction_input(IMX_GPIO_NR(6, 25)); /* MODE0 = 1 */
gpio_direction_input(IMX_GPIO_NR(6, 27)); /* MODE1 = 1 */
gpio_direction_input(IMX_GPIO_NR(6, 28)); /* MODE2 = 1 */
gpio_direction_input(IMX_GPIO_NR(6, 29)); /* MODE3 = 1 */
gpio_direction_input(IMX_GPIO_NR(6, 24)); /* CLK125_EN = 1 */
/* Following reset timing (p.53, fig.8 from the PHY datasheet) */
mdelay(10);
/* De-assert Ethernet PHY nRST */
gpio_set_value(IMX_GPIO_NR(3, 23), 1);
/* PHY is now configured, connect FEC to the pads */
imx_iomux_v3_setup_multiple_pads(enet_pads2, ARRAY_SIZE(enet_pads2));
/*
* PHY datasheet recommends on p.53 to wait at least 100us after reset
* before using MII, so we enforce the delay here
*/
udelay(100);
}
/*
* FPGA
*/
static iomux_v3_cfg_t fpga_pads[] = {
/* FPGA_RESET_N */
MX6_PAD_DISP0_DAT13__GPIO5_IO07 | MUX_PAD_CTRL(NO_PAD_CTRL),
};
static void novena_spl_setup_iomux_fpga(void)
{
imx_iomux_v3_setup_multiple_pads(fpga_pads, ARRAY_SIZE(fpga_pads));
gpio_direction_output(NOVENA_FPGA_RESET_N_GPIO, 0);
}
/*
* GPIO Button
*/
static iomux_v3_cfg_t button_pads[] = {
/* Debug */
MX6_PAD_KEY_COL4__GPIO4_IO14 | MUX_PAD_CTRL(BUTTON_PAD_CTRL),
};
static void novena_spl_setup_iomux_buttons(void)
{
imx_iomux_v3_setup_multiple_pads(button_pads, ARRAY_SIZE(button_pads));
}
/*
* I2C
*/
/*
* I2C1:
* 0x1d ... MMA7455L
* 0x30 ... SO-DIMM temp sensor
* 0x44 ... STMPE610
* 0x50 ... SO-DIMM ID
*/
struct i2c_pads_info i2c_pad_info0 = {
.scl = {
.i2c_mode = MX6_PAD_EIM_D21__I2C1_SCL | PC,
.gpio_mode = MX6_PAD_EIM_D21__GPIO3_IO21 | PC,
.gp = IMX_GPIO_NR(3, 21)
},
.sda = {
.i2c_mode = MX6_PAD_EIM_D28__I2C1_SDA | PC,
.gpio_mode = MX6_PAD_EIM_D28__GPIO3_IO28 | PC,
.gp = IMX_GPIO_NR(3, 28)
}
};
/*
* I2C2:
* 0x08 ... PMIC
* 0x3a ... HDMI DCC
* 0x50 ... HDMI DCC
*/
static struct i2c_pads_info i2c_pad_info1 = {
.scl = {
.i2c_mode = MX6_PAD_EIM_EB2__I2C2_SCL | PC,
.gpio_mode = MX6_PAD_EIM_EB2__GPIO2_IO30 | PC,
.gp = IMX_GPIO_NR(2, 30)
},
.sda = {
.i2c_mode = MX6_PAD_EIM_D16__I2C2_SDA | PC,
.gpio_mode = MX6_PAD_EIM_D16__GPIO3_IO16 | PC,
.gp = IMX_GPIO_NR(3, 16)
}
};
/*
* I2C3:
* 0x11 ... ES8283
* 0x50 ... LCD EDID
* 0x56 ... EEPROM
*/
static struct i2c_pads_info i2c_pad_info2 = {
.scl = {
.i2c_mode = MX6_PAD_EIM_D17__I2C3_SCL | PC,
.gpio_mode = MX6_PAD_EIM_D17__GPIO3_IO17 | PC,
.gp = IMX_GPIO_NR(3, 17)
},
.sda = {
.i2c_mode = MX6_PAD_EIM_D18__I2C3_SDA | PC,
.gpio_mode = MX6_PAD_EIM_D18__GPIO3_IO18 | PC,
.gp = IMX_GPIO_NR(3, 18)
}
};
static void novena_spl_setup_iomux_i2c(void)
{
setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info0);
setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2);
}
/*
* PCI express
*/
#ifdef CONFIG_CMD_PCI
static iomux_v3_cfg_t pcie_pads[] = {
/* "Reset" pin */
MX6_PAD_EIM_D29__GPIO3_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL),
/* "Power on" pin */
MX6_PAD_GPIO_17__GPIO7_IO12 | MUX_PAD_CTRL(NO_PAD_CTRL),
/* "Wake up" pin (input) */
MX6_PAD_EIM_D22__GPIO3_IO22 | MUX_PAD_CTRL(NO_PAD_CTRL),
/* "Disable endpoint" (rfkill) pin */
MX6_PAD_EIM_A22__GPIO2_IO16 | MUX_PAD_CTRL(NO_PAD_CTRL),
};
static void novena_spl_setup_iomux_pcie(void)
{
imx_iomux_v3_setup_multiple_pads(pcie_pads, ARRAY_SIZE(pcie_pads));
/* Ensure PCIe is powered down */
gpio_direction_output(NOVENA_PCIE_POWER_ON_GPIO, 0);
/* Put the card into reset */
gpio_direction_output(NOVENA_PCIE_RESET_GPIO, 0);
/* Input signal to wake system from mPCIe card */
gpio_direction_input(NOVENA_PCIE_WAKE_UP_GPIO);
/* Drive RFKILL high, to ensure the radio is turned on */
gpio_direction_output(NOVENA_PCIE_DISABLE_GPIO, 1);
}
#else
static inline void novena_spl_setup_iomux_pcie(void) {}
#endif
/*
* SDHC
*/
static iomux_v3_cfg_t usdhc2_pads[] = {
MX6_PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_GPIO_2__GPIO1_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL), /* WP */
MX6_PAD_GPIO_4__GPIO1_IO04 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
};
static iomux_v3_cfg_t usdhc3_pads[] = {
MX6_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
};
static void novena_spl_setup_iomux_sdhc(void)
{
imx_iomux_v3_setup_multiple_pads(usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
imx_iomux_v3_setup_multiple_pads(usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
/* Big SD write-protect and card-detect */
gpio_direction_input(IMX_GPIO_NR(1, 2));
gpio_direction_input(IMX_GPIO_NR(1, 4));
}
/*
* SPI
*/
#ifdef CONFIG_MXC_SPI
static iomux_v3_cfg_t ecspi3_pads[] = {
/* SS1 */
MX6_PAD_DISP0_DAT1__ECSPI3_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL),
MX6_PAD_DISP0_DAT2__ECSPI3_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL),
MX6_PAD_DISP0_DAT0__ECSPI3_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL),
MX6_PAD_DISP0_DAT3__GPIO4_IO24 | MUX_PAD_CTRL(SPI_PAD_CTRL),
MX6_PAD_DISP0_DAT4__GPIO4_IO25 | MUX_PAD_CTRL(SPI_PAD_CTRL),
MX6_PAD_DISP0_DAT5__GPIO4_IO26 | MUX_PAD_CTRL(SPI_PAD_CTRL),
MX6_PAD_DISP0_DAT7__ECSPI3_RDY | MUX_PAD_CTRL(SPI_PAD_CTRL),
};
static void novena_spl_setup_iomux_spi(void)
{
imx_iomux_v3_setup_multiple_pads(ecspi3_pads, ARRAY_SIZE(ecspi3_pads));
/* De-assert the nCS */
gpio_direction_output(MX6_PAD_DISP0_DAT3__GPIO4_IO24, 1);
gpio_direction_output(MX6_PAD_DISP0_DAT4__GPIO4_IO25, 1);
gpio_direction_output(MX6_PAD_DISP0_DAT5__GPIO4_IO26, 1);
}
#else
static void novena_spl_setup_iomux_spi(void) {}
#endif
/*
* UART
*/
static iomux_v3_cfg_t const uart2_pads[] = {
MX6_PAD_EIM_D26__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
MX6_PAD_EIM_D27__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
};
static iomux_v3_cfg_t const uart3_pads[] = {
MX6_PAD_EIM_D24__UART3_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
MX6_PAD_EIM_D25__UART3_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
};
static iomux_v3_cfg_t const uart4_pads[] = {
MX6_PAD_KEY_COL0__UART4_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
MX6_PAD_KEY_ROW0__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
MX6_PAD_CSI0_DAT16__UART4_CTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
MX6_PAD_CSI0_DAT17__UART4_RTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
};
static void novena_spl_setup_iomux_uart(void)
{
imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads));
imx_iomux_v3_setup_multiple_pads(uart3_pads, ARRAY_SIZE(uart3_pads));
imx_iomux_v3_setup_multiple_pads(uart4_pads, ARRAY_SIZE(uart4_pads));
}
/*
* Video
*/
#ifdef CONFIG_VIDEO
static iomux_v3_cfg_t hdmi_pads[] = {
/* "Ghost HPD" pin */
MX6_PAD_EIM_A24__GPIO5_IO04 | MUX_PAD_CTRL(NO_PAD_CTRL),
/* LCD_PWR_CTL */
MX6_PAD_CSI0_DAT10__GPIO5_IO28 | MUX_PAD_CTRL(NO_PAD_CTRL),
/* LCD_BL_ON */
MX6_PAD_KEY_ROW4__GPIO4_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL),
/* GPIO_PWM1 */
MX6_PAD_DISP0_DAT8__GPIO4_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL),
};
static void novena_spl_setup_iomux_video(void)
{
imx_iomux_v3_setup_multiple_pads(hdmi_pads, ARRAY_SIZE(hdmi_pads));
gpio_direction_input(NOVENA_HDMI_GHOST_HPD);
}
#else
static inline void novena_spl_setup_iomux_video(void) {}
#endif
/*
* SPL boots from uSDHC card
*/
#ifdef CONFIG_FSL_ESDHC_IMX
static struct fsl_esdhc_cfg usdhc_cfg = {
USDHC3_BASE_ADDR, 0, 4
};
int board_mmc_getcd(struct mmc *mmc)
{
/* There is no CD for a microSD card, assume always present. */
return 1;
}
int board_mmc_init(struct bd_info *bis)
{
usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
return fsl_esdhc_initialize(bis, &usdhc_cfg);
}
#endif
/* Configure MX6Q/DUAL mmdc DDR io registers */
static struct mx6dq_iomux_ddr_regs novena_ddr_ioregs = {
/* SDCLK[0:1], CAS, RAS, Reset: Differential input, 40ohm */
.dram_sdclk_0 = 0x00020038,
.dram_sdclk_1 = 0x00020038,
.dram_cas = 0x00000038,
.dram_ras = 0x00000038,
.dram_reset = 0x00000038,
/* SDCKE[0:1]: 100k pull-up */
.dram_sdcke0 = 0x00000038,
.dram_sdcke1 = 0x00000038,
/* SDBA2: pull-up disabled */
.dram_sdba2 = 0x00000000,
/* SDODT[0:1]: 100k pull-up, 40 ohm */
.dram_sdodt0 = 0x00000038,
.dram_sdodt1 = 0x00000038,
/* SDQS[0:7]: Differential input, 40 ohm */
.dram_sdqs0 = 0x00000038,
.dram_sdqs1 = 0x00000038,
.dram_sdqs2 = 0x00000038,
.dram_sdqs3 = 0x00000038,
.dram_sdqs4 = 0x00000038,
.dram_sdqs5 = 0x00000038,
.dram_sdqs6 = 0x00000038,
.dram_sdqs7 = 0x00000038,
/* DQM[0:7]: Differential input, 40 ohm */
.dram_dqm0 = 0x00000038,
.dram_dqm1 = 0x00000038,
.dram_dqm2 = 0x00000038,
.dram_dqm3 = 0x00000038,
.dram_dqm4 = 0x00000038,
.dram_dqm5 = 0x00000038,
.dram_dqm6 = 0x00000038,
.dram_dqm7 = 0x00000038,
};
/* Configure MX6Q/DUAL mmdc GRP io registers */
static struct mx6dq_iomux_grp_regs novena_grp_ioregs = {
/* DDR3 */
.grp_ddr_type = 0x000c0000,
.grp_ddrmode_ctl = 0x00020000,
/* Disable DDR pullups */
.grp_ddrpke = 0x00000000,
/* ADDR[00:16], SDBA[0:1]: 40 ohm */
.grp_addds = 0x00000038,
/* CS0/CS1/SDBA2/CKE0/CKE1/SDWE: 40 ohm */
.grp_ctlds = 0x00000038,
/* DATA[00:63]: Differential input, 40 ohm */
.grp_ddrmode = 0x00020000,
.grp_b0ds = 0x00000038,
.grp_b1ds = 0x00000038,
.grp_b2ds = 0x00000038,
.grp_b3ds = 0x00000038,
.grp_b4ds = 0x00000038,
.grp_b5ds = 0x00000038,
.grp_b6ds = 0x00000038,
.grp_b7ds = 0x00000038,
};
static struct mx6_mmdc_calibration novena_mmdc_calib = {
/* write leveling calibration determine */
.p0_mpwldectrl0 = 0x00420048,
.p0_mpwldectrl1 = 0x006f0059,
.p1_mpwldectrl0 = 0x005a0104,
.p1_mpwldectrl1 = 0x01070113,
/* Read DQS Gating calibration */
.p0_mpdgctrl0 = 0x437c040b,
.p0_mpdgctrl1 = 0x0413040e,
.p1_mpdgctrl0 = 0x444f0446,
.p1_mpdgctrl1 = 0x044d0422,
/* Read Calibration: DQS delay relative to DQ read access */
.p0_mprddlctl = 0x4c424249,
.p1_mprddlctl = 0x4e48414f,
/* Write Calibration: DQ/DM delay relative to DQS write access */
.p0_mpwrdlctl = 0x42414641,
.p1_mpwrdlctl = 0x46374b43,
};
static struct mx6_ddr_sysinfo novena_ddr_info = {
/* Width of data bus: 0=16, 1=32, 2=64 */
.dsize = 2,
/* Config for full 4GB range so that get_mem_size() works */
.cs_density = 32, /* 32Gb per CS */
/* Single chip select */
.ncs = 1,
.cs1_mirror = 0,
.rtt_wr = 0, /* RTT_Wr = RZQ/4 */
.rtt_nom = 1, /* RTT_Nom = RZQ/2 */
.walat = 0, /* Write additional latency */
.ralat = 5, /* Read additional latency */
.mif3_mode = 3, /* Command prediction working mode */
.bi_on = 1, /* Bank interleaving enabled */
.sde_to_rst = 0x10, /* 14 cycles, 200us (JEDEC default) */
.rst_to_cke = 0x23, /* 33 cycles, 500us (JEDEC default) */
.refsel = 1, /* Refresh cycles at 32KHz */
.refr = 7, /* 8 refresh commands per refresh cycle */
};
static struct mx6_ddr3_cfg elpida_4gib_1600 = {
.mem_speed = 1600,
.density = 4,
.width = 64,
.banks = 8,
.rowaddr = 16,
.coladdr = 10,
.pagesz = 2,
.trcd = 1375,
.trcmin = 4875,
.trasmin = 3500,
};
static void ccgr_init(void)
{
struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
writel(0x00C03F3F, &ccm->CCGR0);
writel(0x0030FC03, &ccm->CCGR1);
writel(0x0FFFC000, &ccm->CCGR2);
writel(0x3FF00000, &ccm->CCGR3);
writel(0xFFFFF300, &ccm->CCGR4);
writel(0x0F0000C3, &ccm->CCGR5);
writel(0x000003FF, &ccm->CCGR6);
}
/*
* called from C runtime startup code (arch/arm/lib/crt0.S:_main)
* - we have a stack and a place to store GD, both in SRAM
* - no variable global data is available
*/
void board_init_f(ulong dummy)
{
/* setup AIPS and disable watchdog */
arch_cpu_init();
ccgr_init();
gpr_init();
/* setup GP timer */
timer_init();
#ifdef CONFIG_BOARD_POSTCLK_INIT
board_postclk_init();
#endif
#ifdef CONFIG_FSL_ESDHC_IMX
get_clocks();
#endif
/* Setup IOMUX and configure basics. */
novena_spl_setup_iomux_audio();
novena_spl_setup_iomux_buttons();
novena_spl_setup_iomux_enet();
novena_spl_setup_iomux_fpga();
novena_spl_setup_iomux_i2c();
novena_spl_setup_iomux_pcie();
novena_spl_setup_iomux_sdhc();
novena_spl_setup_iomux_spi();
novena_spl_setup_iomux_uart();
novena_spl_setup_iomux_video();
/* UART clocks enabled and gd valid - init serial console */
preloader_console_init();
/* Start the DDR DRAM */
mx6dq_dram_iocfg(64, &novena_ddr_ioregs, &novena_grp_ioregs);
mx6_dram_cfg(&novena_ddr_info, &novena_mmdc_calib, &elpida_4gib_1600);
/* Perform DDR DRAM calibration */
udelay(100);
mmdc_do_write_level_calibration(&novena_ddr_info);
mmdc_do_dqs_calibration(&novena_ddr_info);
}