blob: f3bc1fa7a1693c291a46f86ba796f53bd57edc10 [file] [log] [blame]
/*
* (C) Copyright 2006
* Heiko Schocher, DENX Software Engineering, hs@denx.de
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
*/
/*
* Altera FPGA configuration support for the ALPR computer from prodrive
*/
#include <common.h>
#include <altera.h>
#include <ACEX1K.h>
#include <command.h>
#include <asm/processor.h>
#include <ppc440.h>
#include "fpga.h"
DECLARE_GLOBAL_DATA_PTR;
#if defined(CONFIG_FPGA)
#ifdef FPGA_DEBUG
#define PRINTF(fmt,args...) printf (fmt ,##args)
#else
#define PRINTF(fmt,args...)
#endif
static unsigned long regval;
#define SET_GPIO_REG_0(reg, bit) { \
regval = in32(reg); \
regval &= ~(0x80000000 >> bit); \
out32(reg, regval); \
}
#define SET_GPIO_REG_1(reg, bit) { \
regval = in32(reg); \
regval |= (0x80000000 >> bit); \
out32(reg, regval); \
}
#define SET_GPIO_0(bit) SET_GPIO_REG_0(GPIO0_OR, bit)
#define SET_GPIO_1(bit) SET_GPIO_REG_1(GPIO0_OR, bit)
#define FPGA_PRG (0x80000000 >> CONFIG_SYS_GPIO_PROG_EN)
#define FPGA_CONFIG (0x80000000 >> CONFIG_SYS_GPIO_CONFIG)
#define FPGA_DATA (0x80000000 >> CONFIG_SYS_GPIO_DATA)
#define FPGA_CLK (0x80000000 >> CONFIG_SYS_GPIO_CLK)
#define OLD_VAL (FPGA_PRG | FPGA_CONFIG)
#define SET_FPGA(data) out32(GPIO0_OR, data)
#define FPGA_WRITE_1 { \
SET_FPGA(OLD_VAL | 0 | FPGA_DATA); /* set data to 1 */ \
SET_FPGA(OLD_VAL | FPGA_CLK | FPGA_DATA);} /* set data to 1 */
#define FPGA_WRITE_0 { \
SET_FPGA(OLD_VAL | 0 | 0 ); /* set data to 0 */ \
SET_FPGA(OLD_VAL | FPGA_CLK | 0 );} /* set data to 1 */
/* Plattforminitializations */
/* Here we have to set the FPGA Chain */
/* PROGRAM_PROG_EN = HIGH */
/* PROGRAM_SEL_DPR = LOW */
int fpga_pre_fn (int cookie)
{
unsigned long reg;
reg = in32(GPIO0_IR);
/* Enable the FPGA Chain */
SET_GPIO_REG_1(GPIO0_TCR, CONFIG_SYS_GPIO_PROG_EN);
SET_GPIO_REG_0(GPIO0_ODR, CONFIG_SYS_GPIO_PROG_EN);
SET_GPIO_1(CONFIG_SYS_GPIO_PROG_EN);
SET_GPIO_REG_1(GPIO0_TCR, CONFIG_SYS_GPIO_SEL_DPR);
SET_GPIO_REG_0(GPIO0_ODR, CONFIG_SYS_GPIO_SEL_DPR);
SET_GPIO_0((CONFIG_SYS_GPIO_SEL_DPR));
/* initialize the GPIO Pins */
/* output */
SET_GPIO_0(CONFIG_SYS_GPIO_CLK);
SET_GPIO_REG_1(GPIO0_TCR, CONFIG_SYS_GPIO_CLK);
SET_GPIO_REG_0(GPIO0_ODR, CONFIG_SYS_GPIO_CLK);
/* output */
SET_GPIO_0(CONFIG_SYS_GPIO_DATA);
SET_GPIO_REG_1(GPIO0_TCR, CONFIG_SYS_GPIO_DATA);
SET_GPIO_REG_0(GPIO0_ODR, CONFIG_SYS_GPIO_DATA);
/* First we set STATUS to 0 then as an input */
SET_GPIO_REG_1(GPIO0_TCR, CONFIG_SYS_GPIO_STATUS);
SET_GPIO_REG_0(GPIO0_ODR, CONFIG_SYS_GPIO_STATUS);
SET_GPIO_0(CONFIG_SYS_GPIO_STATUS);
SET_GPIO_REG_0(GPIO0_TCR, CONFIG_SYS_GPIO_STATUS);
SET_GPIO_REG_0(GPIO0_ODR, CONFIG_SYS_GPIO_STATUS);
/* output */
SET_GPIO_REG_1(GPIO0_TCR, CONFIG_SYS_GPIO_CONFIG);
SET_GPIO_REG_0(GPIO0_ODR, CONFIG_SYS_GPIO_CONFIG);
SET_GPIO_0(CONFIG_SYS_GPIO_CONFIG);
/* input */
SET_GPIO_0(CONFIG_SYS_GPIO_CON_DON);
SET_GPIO_REG_0(GPIO0_TCR, CONFIG_SYS_GPIO_CON_DON);
SET_GPIO_REG_0(GPIO0_ODR, CONFIG_SYS_GPIO_CON_DON);
/* CONFIG = 0 STATUS = 0 -> FPGA in reset state */
SET_GPIO_0(CONFIG_SYS_GPIO_CONFIG);
return FPGA_SUCCESS;
}
/* Set the state of CONFIG Pin */
int fpga_config_fn (int assert_config, int flush, int cookie)
{
if (assert_config) {
SET_GPIO_1(CONFIG_SYS_GPIO_CONFIG);
} else {
SET_GPIO_0(CONFIG_SYS_GPIO_CONFIG);
}
return FPGA_SUCCESS;
}
/* Returns the state of STATUS Pin */
int fpga_status_fn (int cookie)
{
unsigned long reg;
reg = in32(GPIO0_IR);
if (reg &= (0x80000000 >> CONFIG_SYS_GPIO_STATUS)) {
PRINTF("STATUS = HIGH\n");
return FPGA_FAIL;
}
PRINTF("STATUS = LOW\n");
return FPGA_SUCCESS;
}
/* Returns the state of CONF_DONE Pin */
int fpga_done_fn (int cookie)
{
unsigned long reg;
reg = in32(GPIO0_IR);
if (reg &= (0x80000000 >> CONFIG_SYS_GPIO_CON_DON)) {
PRINTF("CONF_DON = HIGH\n");
return FPGA_FAIL;
}
PRINTF("CONF_DON = LOW\n");
return FPGA_SUCCESS;
}
/* writes the complete buffer to the FPGA
writing the complete buffer in one function is much faster,
then calling it for every bit */
int fpga_write_fn (void *buf, size_t len, int flush, int cookie)
{
size_t bytecount = 0;
unsigned char *data = (unsigned char *) buf;
unsigned char val=0;
int i;
int len_40 = len / 40;
while (bytecount < len) {
val = data[bytecount++];
i = 8;
do {
if (val & 0x01) {
FPGA_WRITE_1;
} else {
FPGA_WRITE_0;
}
val >>= 1;
i --;
} while (i > 0);
#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
if (bytecount % len_40 == 0) {
putc ('.'); /* let them know we are alive */
#ifdef CONFIG_SYS_FPGA_CHECK_CTRLC
if (ctrlc ())
return FPGA_FAIL;
#endif
}
#endif
}
return FPGA_SUCCESS;
}
/* called, when programming is aborted */
int fpga_abort_fn (int cookie)
{
SET_GPIO_1((CONFIG_SYS_GPIO_SEL_DPR));
return FPGA_SUCCESS;
}
/* called, when programming was succesful */
int fpga_post_fn (int cookie)
{
return fpga_abort_fn (cookie);
}
/* Note that these are pointers to code that is in Flash. They will be
* relocated at runtime.
*/
Altera_CYC2_Passive_Serial_fns fpga_fns = {
fpga_pre_fn,
fpga_config_fn,
fpga_status_fn,
fpga_done_fn,
fpga_write_fn,
fpga_abort_fn,
fpga_post_fn
};
Altera_desc fpga[CONFIG_FPGA_COUNT] = {
{Altera_CYC2,
passive_serial,
Altera_EP2C35_SIZE,
(void *) &fpga_fns,
NULL,
0}
};
/*
* Initialize the fpga. Return 1 on success, 0 on failure.
*/
int alpr_fpga_init (void)
{
int i;
PRINTF ("%s:%d: Initialize FPGA interface\n", __FUNCTION__, __LINE__);
fpga_init ();
for (i = 0; i < CONFIG_FPGA_COUNT; i++) {
PRINTF ("%s:%d: Adding fpga %d\n", __FUNCTION__, __LINE__, i);
fpga_add (fpga_altera, &fpga[i]);
}
return 1;
}
#endif