blob: 8ff882264f44876cb9299ee681687a6cf4802db6 [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause */
/*
* Copyright (C) 2020 Marek Vasut <marex@denx.de>
*
* Configuration settings for the DH STM32MP15x SoMs
*/
#ifndef __CONFIG_STM32MP15_DH_DHSOM_H__
#define __CONFIG_STM32MP15_DH_DHSOM_H__
/* PHY needs a longer autoneg timeout */
#define PHY_ANEG_TIMEOUT 20000
#ifdef CONFIG_SPL_BUILD
#define CFG_EXTRA_ENV_SETTINGS \
"dfu_alt_info_ram=u-boot.itb ram " \
__stringify(CONFIG_SPL_LOAD_FIT_ADDRESS) \
" 0x800000\0"
#endif
#define STM32MP_BOARD_EXTRA_ENV \
"usb_pgood_delay=1000\0" \
"dh_update_sd_to_emmc=" /* Install U-Boot from SD to eMMC */ \
"setexpr loadaddr1 ${loadaddr} + 0x1000000 && " \
"load mmc 0:4 ${loadaddr1} boot/u-boot-spl.stm32 && " \
"setexpr sblkcnt ${filesize} + 0x1ff && " \
"setexpr sblkcnt ${sblkcnt} / 0x200 && " \
"load mmc 0:4 ${loadaddr} boot/u-boot.itb && " \
"setexpr ublkcnt ${filesize} + 0x1ff && " \
"setexpr ublkcnt ${ublkcnt} / 0x200 && " \
"mmc partconf 1 1 1 1 && mmc dev 1 1 && " \
"mmc write ${loadaddr1} 0 ${sblkcnt} && " \
"mmc dev 1 2 && " \
"mmc write ${loadaddr1} 0 ${sblkcnt} && " \
"mmc dev 1 && " \
"gpt write mmc 1 'name=ssbl,size=2MiB' && " \
"mmc write ${loadaddr} 0x22 ${ublkcnt} && " \
"mmc partconf 1 1 1 0 && " \
"setenv loadaddr1 && " \
"setenv sblkcnt && " \
"setenv ublkcnt\0" \
"dh_update_sd_to_sf=" /* Erase SPI NOR and install U-Boot from SD */ \
"setexpr loadaddr1 ${loadaddr} + 0x1000000 && " \
"load mmc 0:4 ${loadaddr1} /boot/u-boot-spl.stm32 && " \
"env set filesize1 ${filesize} && " \
"load mmc 0:4 ${loadaddr} /boot/u-boot.itb && " \
"sf probe && sf erase 0 0x200000 && " \
"sf update ${loadaddr1} 0 ${filesize1} && " \
"sf update ${loadaddr1} 0x40000 ${filesize1} && " \
"sf update ${loadaddr} 0x80000 ${filesize} && " \
"env set filesize1 && env set loadaddr1\0" \
"update_sf=run dh_update_sd_to_sf\0"
#include <configs/stm32mp15_common.h>
#endif