| # SPDX-License-Identifier: GPL-2.0 |
| # ========================================================================== |
| # Building |
| # ========================================================================== |
| |
| # Modified for U-Boot |
| prefix := tpl |
| src := $(patsubst $(prefix)/%,%,$(obj)) |
| ifeq ($(obj),$(src)) |
| prefix := spl |
| src := $(patsubst $(prefix)/%,%,$(obj)) |
| ifeq ($(obj),$(src)) |
| prefix := . |
| endif |
| endif |
| |
| PHONY := __build |
| __build: |
| |
| # Init all relevant variables used in kbuild files so |
| # 1) they have correct type |
| # 2) they do not inherit any value from the environment |
| obj-y := |
| obj-m := |
| lib-y := |
| lib-m := |
| always := |
| targets := |
| subdir-y := |
| subdir-m := |
| EXTRA_AFLAGS := |
| EXTRA_CFLAGS := |
| EXTRA_CPPFLAGS := |
| EXTRA_LDFLAGS := |
| asflags-y := |
| ccflags-y := |
| cppflags-y := |
| ldflags-y := |
| |
| subdir-asflags-y := |
| subdir-ccflags-y := |
| |
| # Read auto.conf if it exists, otherwise ignore |
| # Modified for U-Boot |
| -include include/config/auto.conf |
| -include $(prefix)/include/autoconf.mk |
| include scripts/Makefile.uncmd_spl |
| |
| include scripts/Kbuild.include |
| |
| # For backward compatibility check that these variables do not change |
| save-cflags := $(CFLAGS) |
| |
| # The filename Kbuild has precedence over Makefile |
| kbuild-dir := $(if $(filter /%,$(src)),$(src),$(srctree)/$(src)) |
| kbuild-file := $(if $(wildcard $(kbuild-dir)/Kbuild),$(kbuild-dir)/Kbuild,$(kbuild-dir)/Makefile) |
| include $(kbuild-file) |
| |
| # Added for U-Boot |
| asflags-y += $(PLATFORM_CPPFLAGS) |
| ccflags-y += $(PLATFORM_CPPFLAGS) |
| cppflags-y += $(PLATFORM_CPPFLAGS) |
| |
| # If the save-* variables changed error out |
| ifeq ($(KBUILD_NOPEDANTIC),) |
| ifneq ("$(save-cflags)","$(CFLAGS)") |
| $(error CFLAGS was changed in "$(kbuild-file)". Fix it to use ccflags-y) |
| endif |
| endif |
| |
| include scripts/Makefile.lib |
| |
| # Do not include host rules unless needed |
| ifneq ($(hostprogs-y)$(hostprogs-m)$(hostlibs-y)$(hostlibs-m)$(hostcxxlibs-y)$(hostcxxlibs-m),) |
| include scripts/Makefile.host |
| endif |
| |
| # Uncommented for U-Boot |
| # We need to create output dicrectory for SPL and TPL even for in-tree build |
| #ifneq ($(KBUILD_SRC),) |
| # Create output directory if not already present |
| _dummy := $(shell [ -d $(obj) ] || mkdir -p $(obj)) |
| |
| # Create directories for object files if directory does not exist |
| # Needed when obj-y := dir/file.o syntax is used |
| _dummy := $(foreach d,$(obj-dirs), $(shell [ -d $(d) ] || mkdir -p $(d))) |
| #endif |
| |
| ifndef obj |
| $(warning kbuild: Makefile.build is included improperly) |
| endif |
| |
| # =========================================================================== |
| |
| ifneq ($(strip $(lib-y) $(lib-m) $(lib-)),) |
| lib-target := $(obj)/lib.a |
| endif |
| |
| ifneq ($(strip $(obj-y) $(obj-m) $(obj-) $(subdir-m) $(lib-target)),) |
| builtin-target := $(obj)/built-in.o |
| endif |
| |
| modorder-target := $(obj)/modules.order |
| |
| # We keep a list of all modules in $(MODVERDIR) |
| |
| __build: $(if $(KBUILD_BUILTIN),$(builtin-target) $(lib-target) $(extra-y)) \ |
| $(if $(KBUILD_MODULES),$(obj-m) $(modorder-target)) \ |
| $(subdir-ym) $(always) |
| @: |
| |
| # Linus' kernel sanity checking tool |
| ifneq ($(KBUILD_CHECKSRC),0) |
| ifeq ($(KBUILD_CHECKSRC),2) |
| quiet_cmd_force_checksrc = CHECK $< |
| cmd_force_checksrc = $(CHECK) $(CHECKFLAGS) $(c_flags) $< ; |
| else |
| quiet_cmd_checksrc = CHECK $< |
| cmd_checksrc = $(CHECK) $(CHECKFLAGS) $(c_flags) $< ; |
| endif |
| endif |
| |
| # Do section mismatch analysis for each module/built-in.o |
| ifdef CONFIG_DEBUG_SECTION_MISMATCH |
| cmd_secanalysis = ; scripts/mod/modpost $@ |
| endif |
| |
| # Compile C sources (.c) |
| # --------------------------------------------------------------------------- |
| |
| # Default is built-in, unless we know otherwise |
| modkern_cflags = \ |
| $(if $(part-of-module), \ |
| $(KBUILD_CFLAGS_MODULE) $(CFLAGS_MODULE), \ |
| $(KBUILD_CFLAGS_KERNEL) $(CFLAGS_KERNEL)) |
| quiet_modtag := $(empty) $(empty) |
| |
| $(real-objs-m) : part-of-module := y |
| $(real-objs-m:.o=.i) : part-of-module := y |
| $(real-objs-m:.o=.s) : part-of-module := y |
| $(real-objs-m:.o=.lst): part-of-module := y |
| |
| $(real-objs-m) : quiet_modtag := [M] |
| $(real-objs-m:.o=.i) : quiet_modtag := [M] |
| $(real-objs-m:.o=.s) : quiet_modtag := [M] |
| $(real-objs-m:.o=.lst): quiet_modtag := [M] |
| |
| $(obj-m) : quiet_modtag := [M] |
| |
| # Default for not multi-part modules |
| modname = $(basetarget) |
| |
| $(multi-objs-m) : modname = $(modname-multi) |
| $(multi-objs-m:.o=.i) : modname = $(modname-multi) |
| $(multi-objs-m:.o=.s) : modname = $(modname-multi) |
| $(multi-objs-m:.o=.lst) : modname = $(modname-multi) |
| $(multi-objs-y) : modname = $(modname-multi) |
| $(multi-objs-y:.o=.i) : modname = $(modname-multi) |
| $(multi-objs-y:.o=.s) : modname = $(modname-multi) |
| $(multi-objs-y:.o=.lst) : modname = $(modname-multi) |
| |
| quiet_cmd_cc_s_c = CC $(quiet_modtag) $@ |
| cmd_cc_s_c = $(CC) $(c_flags) $(DISABLE_LTO) -fverbose-asm -S -o $@ $< |
| |
| $(obj)/%.s: $(src)/%.c FORCE |
| $(call if_changed_dep,cc_s_c) |
| |
| quiet_cmd_cc_i_c = CPP $(quiet_modtag) $@ |
| cmd_cc_i_c = $(CPP) $(c_flags) -o $@ $< |
| |
| $(obj)/%.i: $(src)/%.c FORCE |
| $(call if_changed_dep,cc_i_c) |
| |
| cmd_gensymtypes = \ |
| $(CPP) -D__GENKSYMS__ $(c_flags) $< | \ |
| $(GENKSYMS) $(if $(1), -T $(2)) \ |
| $(if $(KBUILD_PRESERVE),-p) \ |
| -r $(firstword $(wildcard $(2:.symtypes=.symref) /dev/null)) |
| |
| quiet_cmd_cc_symtypes_c = SYM $(quiet_modtag) $@ |
| cmd_cc_symtypes_c = \ |
| set -e; \ |
| $(call cmd_gensymtypes,true,$@) >/dev/null; \ |
| test -s $@ || rm -f $@ |
| |
| $(obj)/%.symtypes : $(src)/%.c FORCE |
| $(call cmd,cc_symtypes_c) |
| |
| # C (.c) files |
| # The C file is compiled and updated dependency information is generated. |
| # (See cmd_cc_o_c + relevant part of rule_cc_o_c) |
| |
| quiet_cmd_cc_o_c = CC $(quiet_modtag) $@ |
| |
| ifndef CONFIG_MODVERSIONS |
| cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $< |
| |
| else |
| # When module versioning is enabled the following steps are executed: |
| # o compile a .tmp_<file>.o from <file>.c |
| # o if .tmp_<file>.o doesn't contain a __ksymtab version, i.e. does |
| # not export symbols, we just rename .tmp_<file>.o to <file>.o and |
| # are done. |
| # o otherwise, we calculate symbol versions using the good old |
| # genksyms on the preprocessed source and postprocess them in a way |
| # that they are usable as a linker script |
| # o generate <file>.o from .tmp_<file>.o using the linker to |
| # replace the unresolved symbols __crc_exported_symbol with |
| # the actual value of the checksum generated by genksyms |
| |
| cmd_cc_o_c = $(CC) $(c_flags) -c -o $(@D)/.tmp_$(@F) $< |
| cmd_modversions = \ |
| if $(OBJDUMP) -h $(@D)/.tmp_$(@F) | grep -q __ksymtab; then \ |
| $(call cmd_gensymtypes,$(KBUILD_SYMTYPES),$(@:.o=.symtypes)) \ |
| > $(@D)/.tmp_$(@F:.o=.ver); \ |
| \ |
| $(LD) $(KBUILD_LDFLAGS) -r -o $@ $(@D)/.tmp_$(@F) \ |
| -T $(@D)/.tmp_$(@F:.o=.ver); \ |
| rm -f $(@D)/.tmp_$(@F) $(@D)/.tmp_$(@F:.o=.ver); \ |
| else \ |
| mv -f $(@D)/.tmp_$(@F) $@; \ |
| fi; |
| endif |
| |
| ifdef CONFIG_FTRACE_MCOUNT_RECORD |
| # gcc 5 supports generating the mcount tables directly |
| ifneq ($(call cc-option,-mrecord-mcount,y),y) |
| KBUILD_CFLAGS += -mrecord-mcount |
| else |
| # else do it all manually |
| ifdef BUILD_C_RECORDMCOUNT |
| ifeq ("$(origin RECORDMCOUNT_WARN)", "command line") |
| RECORDMCOUNT_FLAGS = -w |
| endif |
| # Due to recursion, we must skip empty.o. |
| # The empty.o file is created in the make process in order to determine |
| # the target endianness and word size. It is made before all other C |
| # files, including recordmcount. |
| sub_cmd_record_mcount = \ |
| if [ $(@) != "scripts/mod/empty.o" ]; then \ |
| $(objtree)/scripts/recordmcount $(RECORDMCOUNT_FLAGS) "$(@)"; \ |
| fi; |
| recordmcount_source := $(srctree)/scripts/recordmcount.c \ |
| $(srctree)/scripts/recordmcount.h |
| else |
| sub_cmd_record_mcount = set -e ; perl $(srctree)/scripts/recordmcount.pl "$(ARCH)" \ |
| "$(if $(CONFIG_CPU_BIG_ENDIAN),big,little)" \ |
| "$(if $(CONFIG_64BIT),64,32)" \ |
| "$(OBJDUMP)" "$(OBJCOPY)" "$(CC) $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS)" \ |
| "$(LD) $(KBUILD_LDFLAGS)" "$(NM)" "$(RM)" "$(MV)" \ |
| "$(if $(part-of-module),1,0)" "$(@)"; |
| recordmcount_source := $(srctree)/scripts/recordmcount.pl |
| endif |
| cmd_record_mcount = \ |
| if [ "$(findstring $(CC_FLAGS_FTRACE),$(_c_flags))" = \ |
| "$(CC_FLAGS_FTRACE)" ]; then \ |
| $(sub_cmd_record_mcount) \ |
| fi; |
| endif # -record-mcount |
| endif |
| |
| define rule_cc_o_c |
| $(call echo-cmd,checksrc) $(cmd_checksrc) \ |
| $(call echo-cmd,cc_o_c) $(cmd_cc_o_c); \ |
| $(cmd_modversions) \ |
| $(call echo-cmd,record_mcount) \ |
| $(cmd_record_mcount) \ |
| scripts/basic/fixdep $(depfile) $@ '$(call make-cmd,cc_o_c)' > \ |
| $(dot-target).tmp; \ |
| rm -f $(depfile); \ |
| mv -f $(dot-target).tmp $(dot-target).cmd |
| endef |
| |
| # Built-in and composite module parts |
| $(obj)/%.o: $(src)/%.c $(recordmcount_source) FORCE |
| $(call cmd,force_checksrc) |
| $(call if_changed_rule,cc_o_c) |
| |
| # Single-part modules are special since we need to mark them in $(MODVERDIR) |
| |
| $(single-used-m): $(obj)/%.o: $(src)/%.c $(recordmcount_source) FORCE |
| $(call cmd,force_checksrc) |
| $(call if_changed_rule,cc_o_c) |
| @{ echo $(@:.o=.ko); echo $@; } > $(MODVERDIR)/$(@F:.o=.mod) |
| |
| quiet_cmd_cc_lst_c = MKLST $@ |
| cmd_cc_lst_c = $(CC) $(c_flags) -g -c -o $*.o $< && \ |
| $(CONFIG_SHELL) $(srctree)/scripts/makelst $*.o \ |
| System.map $(OBJDUMP) > $@ |
| |
| $(obj)/%.lst: $(src)/%.c FORCE |
| $(call if_changed_dep,cc_lst_c) |
| |
| # Compile assembler sources (.S) |
| # --------------------------------------------------------------------------- |
| |
| modkern_aflags := $(KBUILD_AFLAGS_KERNEL) $(AFLAGS_KERNEL) |
| |
| $(real-objs-m) : modkern_aflags := $(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE) |
| $(real-objs-m:.o=.s): modkern_aflags := $(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE) |
| |
| quiet_cmd_as_s_S = CPP $(quiet_modtag) $@ |
| cmd_as_s_S = $(CPP) $(a_flags) -o $@ $< |
| |
| $(obj)/%.s: $(src)/%.S FORCE |
| $(call if_changed_dep,as_s_S) |
| |
| quiet_cmd_as_o_S = AS $(quiet_modtag) $@ |
| cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $< |
| |
| $(obj)/%.o: $(src)/%.S FORCE |
| $(call if_changed_dep,as_o_S) |
| |
| targets += $(real-objs-y) $(real-objs-m) $(lib-y) |
| targets += $(extra-y) $(MAKECMDGOALS) $(always) |
| |
| # Linker scripts preprocessor (.lds.S -> .lds) |
| # --------------------------------------------------------------------------- |
| quiet_cmd_cpp_lds_S = LDS $@ |
| cmd_cpp_lds_S = $(CPP) $(cpp_flags) -P -C -U$(ARCH) \ |
| -D__ASSEMBLY__ -DLINKER_SCRIPT -o $@ $< |
| |
| $(obj)/%.lds: $(src)/%.lds.S FORCE |
| $(call if_changed_dep,cpp_lds_S) |
| |
| # ASN.1 grammar |
| # --------------------------------------------------------------------------- |
| quiet_cmd_asn1_compiler = ASN.1 $@ |
| cmd_asn1_compiler = $(objtree)/tools/asn1_compiler $< \ |
| $(subst .h,.c,$@) $(subst .c,.h,$@) |
| |
| $(obj)/%.asn1.c $(obj)/%.asn1.h: $(src)/%.asn1 $(objtree)/tools/asn1_compiler |
| $(call cmd,asn1_compiler) |
| |
| # Build the compiled-in targets |
| # --------------------------------------------------------------------------- |
| |
| # To build objects in subdirs, we need to descend into the directories |
| $(sort $(subdir-obj-y)): $(subdir-ym) ; |
| |
| # |
| # Rule to compile a set of .o files into one .o file |
| # |
| ifdef builtin-target |
| quiet_cmd_link_o_target = LD $@ |
| # If the list of objects to link is empty, just create an empty built-in.o |
| cmd_link_o_target = $(if $(strip $(obj-y)),\ |
| $(LD) $(ld_flags) -r -o $@ $(filter $(obj-y), $^) \ |
| $(cmd_secanalysis),\ |
| rm -f $@; $(AR) rcs$(KBUILD_ARFLAGS) $@) |
| |
| $(builtin-target): $(obj-y) FORCE |
| $(call if_changed,link_o_target) |
| |
| targets += $(builtin-target) |
| endif # builtin-target |
| |
| # |
| # Rule to create modules.order file |
| # |
| # Create commands to either record .ko file or cat modules.order from |
| # a subdirectory |
| modorder-cmds = \ |
| $(foreach m, $(modorder), \ |
| $(if $(filter %/modules.order, $m), \ |
| cat $m;, echo kernel/$m;)) |
| |
| $(modorder-target): $(subdir-ym) FORCE |
| $(Q)(cat /dev/null; $(modorder-cmds)) > $@ |
| |
| # |
| # Rule to compile a set of .o files into one .a file |
| # |
| ifdef lib-target |
| quiet_cmd_link_l_target = AR $@ |
| cmd_link_l_target = rm -f $@; $(AR) rcs$(KBUILD_ARFLAGS) $@ $(lib-y) |
| |
| $(lib-target): $(lib-y) FORCE |
| $(call if_changed,link_l_target) |
| |
| targets += $(lib-target) |
| endif |
| |
| # |
| # Rule to link composite objects |
| # |
| # Composite objects are specified in kbuild makefile as follows: |
| # <composite-object>-objs := <list of .o files> |
| # or |
| # <composite-object>-y := <list of .o files> |
| link_multi_deps = \ |
| $(filter $(addprefix $(obj)/, \ |
| $($(subst $(obj)/,,$(@:.o=-objs))) \ |
| $($(subst $(obj)/,,$(@:.o=-y)))), $^) |
| |
| quiet_cmd_link_multi-y = LD $@ |
| cmd_link_multi-y = $(LD) $(ld_flags) -r -o $@ $(link_multi_deps) $(cmd_secanalysis) |
| |
| quiet_cmd_link_multi-m = LD [M] $@ |
| cmd_link_multi-m = $(cmd_link_multi-y) |
| |
| $(multi-used-y): FORCE |
| $(call if_changed,link_multi-y) |
| $(call multi_depend, $(multi-used-y), .o, -objs -y) |
| |
| $(multi-used-m): FORCE |
| $(call if_changed,link_multi-m) |
| @{ echo $(@:.o=.ko); echo $(link_multi_deps); } > $(MODVERDIR)/$(@F:.o=.mod) |
| $(call multi_depend, $(multi-used-m), .o, -objs -y) |
| |
| targets += $(multi-used-y) $(multi-used-m) |
| |
| |
| # Add intermediate targets: |
| # When building objects with specific suffix patterns, add intermediate |
| # targets that the final targets are derived from. |
| intermediate_targets = $(foreach sfx, $(2), \ |
| $(patsubst %$(strip $(1)),%$(sfx), \ |
| $(filter %$(strip $(1)), $(targets)))) |
| # %.lex.o <- %.lex.c <- %.l |
| # %.tab.o <- %.tab.[ch] <- %.y |
| targets += $(call intermediate_targets, .lex.o, .lex.c) \ |
| $(call intermediate_targets, .tab.o, .tab.c .tab.h) |
| |
| # Descending |
| # --------------------------------------------------------------------------- |
| |
| PHONY += $(subdir-ym) |
| $(subdir-ym): |
| $(Q)$(MAKE) $(build)=$@ |
| |
| # Add FORCE to the prequisites of a target to force it to be always rebuilt. |
| # --------------------------------------------------------------------------- |
| |
| PHONY += FORCE |
| |
| FORCE: |
| |
| # Read all saved command lines and dependencies for the $(targets) we |
| # may be building above, using $(if_changed{,_dep}). As an |
| # optimization, we don't need to read them if the target does not |
| # exist, we will rebuild anyway in that case. |
| |
| targets := $(wildcard $(sort $(targets))) |
| cmd_files := $(wildcard $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd)) |
| |
| ifneq ($(cmd_files),) |
| include $(cmd_files) |
| endif |
| |
| .PHONY: $(PHONY) |