| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2016-2019 Intel Corporation <www.intel.com> |
| * |
| */ |
| |
| #include <asm/io.h> |
| #include <common.h> |
| #include <asm/arch/firewall.h> |
| #include <asm/arch/system_manager.h> |
| |
| static void firewall_l4_per_disable(void) |
| { |
| const struct socfpga_firwall_l4_per *firwall_l4_per_base = |
| (struct socfpga_firwall_l4_per *)SOCFPGA_FIREWALL_L4_PER; |
| u32 i; |
| const u32 *addr[] = { |
| &firwall_l4_per_base->nand, |
| &firwall_l4_per_base->nand_data, |
| &firwall_l4_per_base->usb0, |
| &firwall_l4_per_base->usb1, |
| &firwall_l4_per_base->spim0, |
| &firwall_l4_per_base->spim1, |
| &firwall_l4_per_base->emac0, |
| &firwall_l4_per_base->emac1, |
| &firwall_l4_per_base->emac2, |
| &firwall_l4_per_base->sdmmc, |
| &firwall_l4_per_base->gpio0, |
| &firwall_l4_per_base->gpio1, |
| &firwall_l4_per_base->i2c0, |
| &firwall_l4_per_base->i2c1, |
| &firwall_l4_per_base->i2c2, |
| &firwall_l4_per_base->i2c3, |
| &firwall_l4_per_base->i2c4, |
| &firwall_l4_per_base->timer0, |
| &firwall_l4_per_base->timer1, |
| &firwall_l4_per_base->uart0, |
| &firwall_l4_per_base->uart1 |
| }; |
| |
| /* |
| * The following lines of code will enable non-secure access |
| * to nand, usb, spi, emac, sdmmc, gpio, i2c, timers and uart. This |
| * is needed as most OS run in non-secure mode. Thus we need to |
| * enable non-secure access to these peripherals in order for the |
| * OS to use these peripherals. |
| */ |
| for (i = 0; i < ARRAY_SIZE(addr); i++) |
| writel(FIREWALL_L4_DISABLE_ALL, addr[i]); |
| } |
| |
| static void firewall_l4_sys_disable(void) |
| { |
| const struct socfpga_firwall_l4_sys *firwall_l4_sys_base = |
| (struct socfpga_firwall_l4_sys *)SOCFPGA_FIREWALL_L4_SYS; |
| u32 i; |
| const u32 *addr[] = { |
| &firwall_l4_sys_base->dma_ecc, |
| &firwall_l4_sys_base->emac0rx_ecc, |
| &firwall_l4_sys_base->emac0tx_ecc, |
| &firwall_l4_sys_base->emac1rx_ecc, |
| &firwall_l4_sys_base->emac1tx_ecc, |
| &firwall_l4_sys_base->emac2rx_ecc, |
| &firwall_l4_sys_base->emac2tx_ecc, |
| &firwall_l4_sys_base->nand_ecc, |
| &firwall_l4_sys_base->nand_read_ecc, |
| &firwall_l4_sys_base->nand_write_ecc, |
| &firwall_l4_sys_base->ocram_ecc, |
| &firwall_l4_sys_base->sdmmc_ecc, |
| &firwall_l4_sys_base->usb0_ecc, |
| &firwall_l4_sys_base->usb1_ecc, |
| &firwall_l4_sys_base->clock_manager, |
| &firwall_l4_sys_base->io_manager, |
| &firwall_l4_sys_base->reset_manager, |
| &firwall_l4_sys_base->system_manager, |
| &firwall_l4_sys_base->watchdog0, |
| &firwall_l4_sys_base->watchdog1, |
| &firwall_l4_sys_base->watchdog2, |
| &firwall_l4_sys_base->watchdog3 |
| }; |
| |
| for (i = 0; i < ARRAY_SIZE(addr); i++) |
| writel(FIREWALL_L4_DISABLE_ALL, addr[i]); |
| } |
| |
| static void firewall_bridge_disable(void) |
| { |
| /* disable lwsocf2fpga and soc2fpga bridge security */ |
| writel(FIREWALL_BRIDGE_DISABLE_ALL, SOCFPGA_FIREWALL_SOC2FPGA); |
| writel(FIREWALL_BRIDGE_DISABLE_ALL, SOCFPGA_FIREWALL_LWSOC2FPGA); |
| } |
| |
| void firewall_setup(void) |
| { |
| firewall_l4_per_disable(); |
| firewall_l4_sys_disable(); |
| firewall_bridge_disable(); |
| |
| /* disable SMMU security */ |
| writel(FIREWALL_L4_DISABLE_ALL, SOCFPGA_FIREWALL_TCU); |
| |
| /* enable non-secure interface to DMA330 DMA and peripherals */ |
| writel(SYSMGR_DMA_IRQ_NS | SYSMGR_DMA_MGR_NS, |
| socfpga_get_sysmgr_addr() + SYSMGR_SOC64_DMA); |
| writel(SYSMGR_DMAPERIPH_ALL_NS, |
| socfpga_get_sysmgr_addr() + SYSMGR_SOC64_DMA_PERIPH); |
| } |