| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2002 Wolfgang Grandegger, wg@denx.de. |
| * |
| * This driver for AMD PCnet network controllers is derived from the |
| * Linux driver pcnet32.c written 1996-1999 by Thomas Bogendoerfer. |
| */ |
| |
| #include <common.h> |
| #include <cpu_func.h> |
| #include <dm.h> |
| #include <log.h> |
| #include <malloc.h> |
| #include <memalign.h> |
| #include <net.h> |
| #include <netdev.h> |
| #include <asm/cache.h> |
| #include <asm/io.h> |
| #include <pci.h> |
| #include <linux/delay.h> |
| |
| #define PCNET_DEBUG_LEVEL 0 /* 0=off, 1=init, 2=rx/tx */ |
| |
| #define PCNET_DEBUG1(fmt,args...) \ |
| debug_cond(PCNET_DEBUG_LEVEL > 0, fmt ,##args) |
| #define PCNET_DEBUG2(fmt,args...) \ |
| debug_cond(PCNET_DEBUG_LEVEL > 1, fmt ,##args) |
| |
| /* |
| * Set the number of Tx and Rx buffers, using Log_2(# buffers). |
| * Reasonable default values are 4 Tx buffers, and 16 Rx buffers. |
| * That translates to 2 (4 == 2^^2) and 4 (16 == 2^^4). |
| */ |
| #define PCNET_LOG_TX_BUFFERS 0 |
| #define PCNET_LOG_RX_BUFFERS 2 |
| |
| #define TX_RING_SIZE (1 << (PCNET_LOG_TX_BUFFERS)) |
| #define TX_RING_LEN_BITS ((PCNET_LOG_TX_BUFFERS) << 12) |
| |
| #define RX_RING_SIZE (1 << (PCNET_LOG_RX_BUFFERS)) |
| #define RX_RING_LEN_BITS ((PCNET_LOG_RX_BUFFERS) << 4) |
| |
| #define PKT_BUF_SZ 1544 |
| |
| /* The PCNET Rx and Tx ring descriptors. */ |
| struct pcnet_rx_head { |
| u32 base; |
| s16 buf_length; |
| s16 status; |
| u32 msg_length; |
| u32 reserved; |
| }; |
| |
| struct pcnet_tx_head { |
| u32 base; |
| s16 length; |
| s16 status; |
| u32 misc; |
| u32 reserved; |
| }; |
| |
| /* The PCNET 32-Bit initialization block, described in databook. */ |
| struct pcnet_init_block { |
| u16 mode; |
| u16 tlen_rlen; |
| u8 phys_addr[6]; |
| u16 reserved; |
| u32 filter[2]; |
| /* Receive and transmit ring base, along with extra bits. */ |
| u32 rx_ring; |
| u32 tx_ring; |
| u32 reserved2; |
| }; |
| |
| struct pcnet_uncached_priv { |
| struct pcnet_rx_head rx_ring[RX_RING_SIZE]; |
| struct pcnet_tx_head tx_ring[TX_RING_SIZE]; |
| struct pcnet_init_block init_block; |
| } __aligned(ARCH_DMA_MINALIGN); |
| |
| struct pcnet_priv { |
| struct pcnet_uncached_priv ucp; |
| /* Receive Buffer space */ |
| unsigned char rx_buf[RX_RING_SIZE][PKT_BUF_SZ + 4]; |
| struct pcnet_uncached_priv *uc; |
| #ifdef CONFIG_DM_ETH |
| struct udevice *dev; |
| const char *name; |
| #else |
| pci_dev_t dev; |
| char *name; |
| #endif |
| void __iomem *iobase; |
| u8 *enetaddr; |
| u16 status; |
| int cur_rx; |
| int cur_tx; |
| }; |
| |
| /* Offsets from base I/O address for WIO mode */ |
| #define PCNET_RDP 0x10 |
| #define PCNET_RAP 0x12 |
| #define PCNET_RESET 0x14 |
| #define PCNET_BDP 0x16 |
| |
| static u16 pcnet_read_csr(struct pcnet_priv *lp, int index) |
| { |
| writew(index, lp->iobase + PCNET_RAP); |
| return readw(lp->iobase + PCNET_RDP); |
| } |
| |
| static void pcnet_write_csr(struct pcnet_priv *lp, int index, u16 val) |
| { |
| writew(index, lp->iobase + PCNET_RAP); |
| writew(val, lp->iobase + PCNET_RDP); |
| } |
| |
| static u16 pcnet_read_bcr(struct pcnet_priv *lp, int index) |
| { |
| writew(index, lp->iobase + PCNET_RAP); |
| return readw(lp->iobase + PCNET_BDP); |
| } |
| |
| static void pcnet_write_bcr(struct pcnet_priv *lp, int index, u16 val) |
| { |
| writew(index, lp->iobase + PCNET_RAP); |
| writew(val, lp->iobase + PCNET_BDP); |
| } |
| |
| static void pcnet_reset(struct pcnet_priv *lp) |
| { |
| readw(lp->iobase + PCNET_RESET); |
| } |
| |
| static int pcnet_check(struct pcnet_priv *lp) |
| { |
| writew(88, lp->iobase + PCNET_RAP); |
| return readw(lp->iobase + PCNET_RAP) == 88; |
| } |
| |
| static inline pci_addr_t pcnet_virt_to_mem(struct pcnet_priv *lp, void *addr) |
| { |
| void *virt_addr = addr; |
| |
| #ifdef CONFIG_DM_ETH |
| return dm_pci_virt_to_mem(lp->dev, virt_addr); |
| #else |
| return pci_virt_to_mem(lp->dev, virt_addr); |
| #endif |
| } |
| |
| static struct pci_device_id supported[] = { |
| { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_LANCE) }, |
| {} |
| }; |
| |
| static int pcnet_probe_common(struct pcnet_priv *lp) |
| { |
| int chip_version; |
| char *chipname; |
| int i; |
| |
| /* Reset the PCnet controller */ |
| pcnet_reset(lp); |
| |
| /* Check if register access is working */ |
| if (pcnet_read_csr(lp, 0) != 4 || !pcnet_check(lp)) { |
| printf("%s: CSR register access check failed\n", lp->name); |
| return -1; |
| } |
| |
| /* Identify the chip */ |
| chip_version = pcnet_read_csr(lp, 88) | (pcnet_read_csr(lp, 89) << 16); |
| if ((chip_version & 0xfff) != 0x003) |
| return -1; |
| chip_version = (chip_version >> 12) & 0xffff; |
| switch (chip_version) { |
| case 0x2621: |
| chipname = "PCnet/PCI II 79C970A"; /* PCI */ |
| break; |
| case 0x2625: |
| chipname = "PCnet/FAST III 79C973"; /* PCI */ |
| break; |
| case 0x2627: |
| chipname = "PCnet/FAST III 79C975"; /* PCI */ |
| break; |
| default: |
| printf("%s: PCnet version %#x not supported\n", |
| lp->name, chip_version); |
| return -1; |
| } |
| |
| PCNET_DEBUG1("AMD %s\n", chipname); |
| |
| /* |
| * In most chips, after a chip reset, the ethernet address is read from |
| * the station address PROM at the base address and programmed into the |
| * "Physical Address Registers" CSR12-14. |
| */ |
| for (i = 0; i < 3; i++) { |
| unsigned int val; |
| |
| val = pcnet_read_csr(lp, i + 12) & 0x0ffff; |
| /* There may be endianness issues here. */ |
| lp->enetaddr[2 * i] = val & 0x0ff; |
| lp->enetaddr[2 * i + 1] = (val >> 8) & 0x0ff; |
| } |
| |
| return 0; |
| } |
| |
| static int pcnet_init_common(struct pcnet_priv *lp) |
| { |
| struct pcnet_uncached_priv *uc; |
| int i, val; |
| unsigned long addr; |
| |
| PCNET_DEBUG1("%s: %s...\n", lp->name, __func__); |
| |
| /* Switch pcnet to 32bit mode */ |
| pcnet_write_bcr(lp, 20, 2); |
| |
| /* Set/reset autoselect bit */ |
| val = pcnet_read_bcr(lp, 2) & ~2; |
| val |= 2; |
| pcnet_write_bcr(lp, 2, val); |
| |
| /* Enable auto negotiate, setup, disable fd */ |
| val = pcnet_read_bcr(lp, 32) & ~0x98; |
| val |= 0x20; |
| pcnet_write_bcr(lp, 32, val); |
| |
| /* |
| * Enable NOUFLO on supported controllers, with the transmit |
| * start point set to the full packet. This will cause entire |
| * packets to be buffered by the ethernet controller before |
| * transmission, eliminating underflows which are common on |
| * slower devices. Controllers which do not support NOUFLO will |
| * simply be left with a larger transmit FIFO threshold. |
| */ |
| val = pcnet_read_bcr(lp, 18); |
| val |= 1 << 11; |
| pcnet_write_bcr(lp, 18, val); |
| val = pcnet_read_csr(lp, 80); |
| val |= 0x3 << 10; |
| pcnet_write_csr(lp, 80, val); |
| |
| uc = lp->uc; |
| |
| uc->init_block.mode = cpu_to_le16(0x0000); |
| uc->init_block.filter[0] = 0x00000000; |
| uc->init_block.filter[1] = 0x00000000; |
| |
| /* |
| * Initialize the Rx ring. |
| */ |
| lp->cur_rx = 0; |
| for (i = 0; i < RX_RING_SIZE; i++) { |
| addr = pcnet_virt_to_mem(lp, lp->rx_buf[i]); |
| uc->rx_ring[i].base = cpu_to_le32(addr); |
| uc->rx_ring[i].buf_length = cpu_to_le16(-PKT_BUF_SZ); |
| uc->rx_ring[i].status = cpu_to_le16(0x8000); |
| PCNET_DEBUG1 |
| ("Rx%d: base=0x%x buf_length=0x%hx status=0x%hx\n", i, |
| uc->rx_ring[i].base, uc->rx_ring[i].buf_length, |
| uc->rx_ring[i].status); |
| } |
| |
| /* |
| * Initialize the Tx ring. The Tx buffer address is filled in as |
| * needed, but we do need to clear the upper ownership bit. |
| */ |
| lp->cur_tx = 0; |
| for (i = 0; i < TX_RING_SIZE; i++) { |
| uc->tx_ring[i].base = 0; |
| uc->tx_ring[i].status = 0; |
| } |
| |
| /* |
| * Setup Init Block. |
| */ |
| PCNET_DEBUG1("Init block at 0x%p: MAC", &lp->uc->init_block); |
| |
| for (i = 0; i < 6; i++) { |
| lp->uc->init_block.phys_addr[i] = lp->enetaddr[i]; |
| PCNET_DEBUG1(" %02x", lp->uc->init_block.phys_addr[i]); |
| } |
| |
| uc->init_block.tlen_rlen = cpu_to_le16(TX_RING_LEN_BITS | |
| RX_RING_LEN_BITS); |
| addr = pcnet_virt_to_mem(lp, uc->rx_ring); |
| uc->init_block.rx_ring = cpu_to_le32(addr); |
| addr = pcnet_virt_to_mem(lp, uc->tx_ring); |
| uc->init_block.tx_ring = cpu_to_le32(addr); |
| |
| PCNET_DEBUG1("\ntlen_rlen=0x%x rx_ring=0x%x tx_ring=0x%x\n", |
| uc->init_block.tlen_rlen, |
| uc->init_block.rx_ring, uc->init_block.tx_ring); |
| |
| /* |
| * Tell the controller where the Init Block is located. |
| */ |
| barrier(); |
| addr = pcnet_virt_to_mem(lp, &lp->uc->init_block); |
| pcnet_write_csr(lp, 1, addr & 0xffff); |
| pcnet_write_csr(lp, 2, (addr >> 16) & 0xffff); |
| |
| pcnet_write_csr(lp, 4, 0x0915); |
| pcnet_write_csr(lp, 0, 0x0001); /* start */ |
| |
| /* Wait for Init Done bit */ |
| for (i = 10000; i > 0; i--) { |
| if (pcnet_read_csr(lp, 0) & 0x0100) |
| break; |
| udelay(10); |
| } |
| if (i <= 0) { |
| printf("%s: TIMEOUT: controller init failed\n", lp->name); |
| pcnet_reset(lp); |
| return -1; |
| } |
| |
| /* |
| * Finally start network controller operation. |
| */ |
| pcnet_write_csr(lp, 0, 0x0002); |
| |
| return 0; |
| } |
| |
| static int pcnet_send_common(struct pcnet_priv *lp, void *packet, int pkt_len) |
| { |
| int i, status; |
| u32 addr; |
| struct pcnet_tx_head *entry = &lp->uc->tx_ring[lp->cur_tx]; |
| |
| PCNET_DEBUG2("Tx%d: %d bytes from 0x%p ", lp->cur_tx, pkt_len, |
| packet); |
| |
| flush_dcache_range((unsigned long)packet, |
| (unsigned long)packet + pkt_len); |
| |
| /* Wait for completion by testing the OWN bit */ |
| for (i = 1000; i > 0; i--) { |
| status = readw(&entry->status); |
| if ((status & 0x8000) == 0) |
| break; |
| udelay(100); |
| PCNET_DEBUG2("."); |
| } |
| if (i <= 0) { |
| printf("%s: TIMEOUT: Tx%d failed (status = 0x%x)\n", |
| lp->name, lp->cur_tx, status); |
| pkt_len = 0; |
| goto failure; |
| } |
| |
| /* |
| * Setup Tx ring. Caution: the write order is important here, |
| * set the status with the "ownership" bits last. |
| */ |
| addr = pcnet_virt_to_mem(lp, packet); |
| writew(-pkt_len, &entry->length); |
| writel(0, &entry->misc); |
| writel(addr, &entry->base); |
| writew(0x8300, &entry->status); |
| |
| /* Trigger an immediate send poll. */ |
| pcnet_write_csr(lp, 0, 0x0008); |
| |
| failure: |
| if (++lp->cur_tx >= TX_RING_SIZE) |
| lp->cur_tx = 0; |
| |
| PCNET_DEBUG2("done\n"); |
| return pkt_len; |
| } |
| |
| static int pcnet_recv_common(struct pcnet_priv *lp, unsigned char **bufp) |
| { |
| struct pcnet_rx_head *entry; |
| unsigned char *buf; |
| int pkt_len = 0; |
| u16 err_status; |
| |
| entry = &lp->uc->rx_ring[lp->cur_rx]; |
| /* |
| * If we own the next entry, it's a new packet. Send it up. |
| */ |
| lp->status = readw(&entry->status); |
| if ((lp->status & 0x8000) != 0) |
| return 0; |
| err_status = lp->status >> 8; |
| |
| if (err_status != 0x03) { /* There was an error. */ |
| printf("%s: Rx%d", lp->name, lp->cur_rx); |
| PCNET_DEBUG1(" (status=0x%x)", err_status); |
| if (err_status & 0x20) |
| printf(" Frame"); |
| if (err_status & 0x10) |
| printf(" Overflow"); |
| if (err_status & 0x08) |
| printf(" CRC"); |
| if (err_status & 0x04) |
| printf(" Fifo"); |
| printf(" Error\n"); |
| lp->status &= 0x03ff; |
| return 0; |
| } |
| |
| pkt_len = (readl(&entry->msg_length) & 0xfff) - 4; |
| if (pkt_len < 60) { |
| printf("%s: Rx%d: invalid packet length %d\n", |
| lp->name, lp->cur_rx, pkt_len); |
| return 0; |
| } |
| |
| *bufp = lp->rx_buf[lp->cur_rx]; |
| invalidate_dcache_range((unsigned long)*bufp, |
| (unsigned long)*bufp + pkt_len); |
| |
| PCNET_DEBUG2("Rx%d: %d bytes from 0x%p\n", |
| lp->cur_rx, pkt_len, buf); |
| |
| return pkt_len; |
| } |
| |
| static void pcnet_free_pkt_common(struct pcnet_priv *lp, unsigned int len) |
| { |
| struct pcnet_rx_head *entry; |
| |
| entry = &lp->uc->rx_ring[lp->cur_rx]; |
| |
| lp->status |= 0x8000; |
| writew(lp->status, &entry->status); |
| |
| if (++lp->cur_rx >= RX_RING_SIZE) |
| lp->cur_rx = 0; |
| } |
| |
| static void pcnet_halt_common(struct pcnet_priv *lp) |
| { |
| int i; |
| |
| PCNET_DEBUG1("%s: %s...\n", lp->name, __func__); |
| |
| /* Reset the PCnet controller */ |
| pcnet_reset(lp); |
| |
| /* Wait for Stop bit */ |
| for (i = 1000; i > 0; i--) { |
| if (pcnet_read_csr(lp, 0) & 0x4) |
| break; |
| udelay(10); |
| } |
| if (i <= 0) |
| printf("%s: TIMEOUT: controller reset failed\n", lp->name); |
| } |
| |
| #ifndef CONFIG_DM_ETH |
| static int pcnet_init(struct eth_device *dev, struct bd_info *bis) |
| { |
| struct pcnet_priv *lp = dev->priv; |
| |
| return pcnet_init_common(lp); |
| } |
| |
| static int pcnet_send(struct eth_device *dev, void *packet, int pkt_len) |
| { |
| struct pcnet_priv *lp = dev->priv; |
| |
| return pcnet_send_common(lp, packet, pkt_len); |
| } |
| |
| static int pcnet_recv(struct eth_device *dev) |
| { |
| struct pcnet_priv *lp = dev->priv; |
| uchar *packet; |
| int ret; |
| |
| ret = pcnet_recv_common(lp, &packet); |
| if (ret > 0) |
| net_process_received_packet(packet, ret); |
| if (ret) |
| pcnet_free_pkt_common(lp, ret); |
| |
| return ret; |
| } |
| |
| static void pcnet_halt(struct eth_device *dev) |
| { |
| struct pcnet_priv *lp = dev->priv; |
| |
| pcnet_halt_common(lp); |
| } |
| |
| int pcnet_initialize(struct bd_info *bis) |
| { |
| pci_dev_t devbusfn; |
| struct eth_device *dev; |
| struct pcnet_priv *lp; |
| u16 command, status; |
| int dev_nr = 0; |
| u32 bar; |
| |
| PCNET_DEBUG1("\n%s...\n", __func__); |
| |
| for (dev_nr = 0; ; dev_nr++) { |
| /* |
| * Find the PCnet PCI device(s). |
| */ |
| devbusfn = pci_find_devices(supported, dev_nr); |
| if (devbusfn < 0) |
| break; |
| |
| /* |
| * Allocate and pre-fill the device structure. |
| */ |
| dev = calloc(1, sizeof(*dev)); |
| if (!dev) { |
| printf("pcnet: Can not allocate memory\n"); |
| break; |
| } |
| |
| /* |
| * We only maintain one structure because the drivers will |
| * never be used concurrently. In 32bit mode the RX and TX |
| * ring entries must be aligned on 16-byte boundaries. |
| */ |
| lp = malloc_cache_aligned(sizeof(*lp)); |
| lp->uc = map_physmem((phys_addr_t)&lp->ucp, |
| sizeof(lp->ucp), MAP_NOCACHE); |
| lp->dev = devbusfn; |
| flush_dcache_range((unsigned long)lp, |
| (unsigned long)lp + sizeof(*lp)); |
| dev->priv = lp; |
| sprintf(dev->name, "pcnet#%d", dev_nr); |
| lp->name = dev->name; |
| lp->enetaddr = dev->enetaddr; |
| |
| /* |
| * Setup the PCI device. |
| */ |
| pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_1, &bar); |
| lp->iobase = (void *)(pci_mem_to_phys(devbusfn, bar) & ~0xf); |
| |
| PCNET_DEBUG1("%s: devbusfn=0x%x iobase=0x%p: ", |
| lp->name, devbusfn, lp->iobase); |
| |
| command = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; |
| pci_write_config_word(devbusfn, PCI_COMMAND, command); |
| pci_read_config_word(devbusfn, PCI_COMMAND, &status); |
| if ((status & command) != command) { |
| printf("%s: Couldn't enable IO access or Bus Mastering\n", |
| lp->name); |
| free(dev); |
| continue; |
| } |
| |
| pci_write_config_byte(devbusfn, PCI_LATENCY_TIMER, 0x40); |
| |
| /* |
| * Probe the PCnet chip. |
| */ |
| if (pcnet_probe_common(lp) < 0) { |
| free(dev); |
| continue; |
| } |
| |
| /* |
| * Setup device structure and register the driver. |
| */ |
| dev->init = pcnet_init; |
| dev->halt = pcnet_halt; |
| dev->send = pcnet_send; |
| dev->recv = pcnet_recv; |
| |
| eth_register(dev); |
| } |
| |
| udelay(10 * 1000); |
| |
| return dev_nr; |
| } |
| #else /* DM_ETH */ |
| static int pcnet_start(struct udevice *dev) |
| { |
| struct eth_pdata *plat = dev_get_platdata(dev); |
| struct pcnet_priv *priv = dev_get_priv(dev); |
| |
| memcpy(priv->enetaddr, plat->enetaddr, sizeof(plat->enetaddr)); |
| |
| return pcnet_init_common(priv); |
| } |
| |
| static void pcnet_stop(struct udevice *dev) |
| { |
| struct pcnet_priv *priv = dev_get_priv(dev); |
| |
| pcnet_halt_common(priv); |
| } |
| |
| static int pcnet_send(struct udevice *dev, void *packet, int length) |
| { |
| struct pcnet_priv *priv = dev_get_priv(dev); |
| int ret; |
| |
| ret = pcnet_send_common(priv, packet, length); |
| |
| return ret ? 0 : -ETIMEDOUT; |
| } |
| |
| static int pcnet_recv(struct udevice *dev, int flags, uchar **packetp) |
| { |
| struct pcnet_priv *priv = dev_get_priv(dev); |
| |
| return pcnet_recv_common(priv, packetp); |
| } |
| |
| static int pcnet_free_pkt(struct udevice *dev, uchar *packet, int length) |
| { |
| struct pcnet_priv *priv = dev_get_priv(dev); |
| |
| pcnet_free_pkt_common(priv, length); |
| |
| return 0; |
| } |
| |
| static int pcnet_bind(struct udevice *dev) |
| { |
| static int card_number; |
| char name[16]; |
| |
| sprintf(name, "pcnet#%u", card_number++); |
| |
| return device_set_name(dev, name); |
| } |
| |
| static int pcnet_probe(struct udevice *dev) |
| { |
| struct eth_pdata *plat = dev_get_platdata(dev); |
| struct pcnet_priv *lp = dev_get_priv(dev); |
| u16 command, status; |
| u32 iobase; |
| int ret; |
| |
| dm_pci_read_config32(dev, PCI_BASE_ADDRESS_1, &iobase); |
| iobase &= ~0xf; |
| |
| lp->uc = map_physmem((phys_addr_t)&lp->ucp, |
| sizeof(lp->ucp), MAP_NOCACHE); |
| lp->dev = dev; |
| lp->name = dev->name; |
| lp->enetaddr = plat->enetaddr; |
| lp->iobase = (void *)dm_pci_mem_to_phys(dev, iobase); |
| |
| flush_dcache_range((unsigned long)lp, |
| (unsigned long)lp + sizeof(*lp)); |
| |
| command = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; |
| dm_pci_write_config16(dev, PCI_COMMAND, command); |
| dm_pci_read_config16(dev, PCI_COMMAND, &status); |
| if ((status & command) != command) { |
| printf("%s: Couldn't enable IO access or Bus Mastering\n", |
| lp->name); |
| return -EINVAL; |
| } |
| |
| dm_pci_write_config8(dev, PCI_LATENCY_TIMER, 0x20); |
| |
| ret = pcnet_probe_common(lp); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| static const struct eth_ops pcnet_ops = { |
| .start = pcnet_start, |
| .send = pcnet_send, |
| .recv = pcnet_recv, |
| .stop = pcnet_stop, |
| .free_pkt = pcnet_free_pkt, |
| }; |
| |
| U_BOOT_DRIVER(eth_pcnet) = { |
| .name = "eth_pcnet", |
| .id = UCLASS_ETH, |
| .bind = pcnet_bind, |
| .probe = pcnet_probe, |
| .ops = &pcnet_ops, |
| .priv_auto_alloc_size = sizeof(struct pcnet_priv), |
| .platdata_auto_alloc_size = sizeof(struct eth_pdata), |
| .flags = DM_UC_FLAG_ALLOC_PRIV_DMA, |
| }; |
| |
| U_BOOT_PCI_DEVICE(eth_pcnet, supported); |
| #endif |