drivers/ddr/fsl/util.c - platform/external/u-boot - Gitiles

 /*
  * Copyright 2008-2012 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * Version 2 as published by the Free Software Foundation.
  */

 #include <common.h>
 #ifdef CONFIG_PPC
 #include <asm/fsl_law.h>
 #endif
 #include <div64.h>

 #include <fsl_ddr.h>
 #include <fsl_immap.h>
 #include <asm/io.h>

 /* To avoid 64-bit full-divides, we factor this here */
 #define ULL_2E12 2000000000000ULL
 #define UL_5POW12 244140625UL
 #define UL_2POW13 (1UL << 13)

 #define ULL_8FS 0xFFFFFFFFULL

 /*
  * Round up mclk_ps to nearest 1 ps in memory controller code
  * if the error is 0.5ps or more.
  *
  * If an imprecise data rate is too high due to rounding error
  * propagation, compute a suitably rounded mclk_ps to compute
  * a working memory controller configuration.
  */
 unsigned int get_memory_clk_period_ps(void)
 {
 	unsigned int data_rate = get_ddr_freq(0);
 	unsigned int result;

 	/* Round to nearest 10ps, being careful about 64-bit multiply/divide */
 	unsigned long long rem, mclk_ps = ULL_2E12;

 	/* Now perform the big divide, the result fits in 32-bits */
 	rem = do_div(mclk_ps, data_rate);
 	result = (rem >= (data_rate >> 1)) ? mclk_ps + 1 : mclk_ps;

 	return result;
 }

 /* Convert picoseconds into DRAM clock cycles (rounding up if needed). */
 unsigned int picos_to_mclk(unsigned int picos)
 {
 	unsigned long long clks, clks_rem;
 	unsigned long data_rate = get_ddr_freq(0);

 	/* Short circuit for zero picos */
 	if (!picos)
 		return 0;

 	/* First multiply the time by the data rate (32x32 => 64) */
 	clks = picos * (unsigned long long)data_rate;
 	/*
 	 * Now divide by 5^12 and track the 32-bit remainder, then divide
 	 * by 2*(2^12) using shifts (and updating the remainder).
 	 */
 	clks_rem = do_div(clks, UL_5POW12);
 	clks_rem += (clks & (UL_2POW13-1)) * UL_5POW12;
 	clks >>= 13;

 	/* If we had a remainder greater than the 1ps error, then round up */
 	if (clks_rem > data_rate)
 		clks++;

 	/* Clamp to the maximum representable value */
 	if (clks > ULL_8FS)
 		clks = ULL_8FS;
 	return (unsigned int) clks;
 }

 unsigned int mclk_to_picos(unsigned int mclk)
 {
 	return get_memory_clk_period_ps() * mclk;
 }

 #ifdef CONFIG_PPC
 void
 __fsl_ddr_set_lawbar(const common_timing_params_t *memctl_common_params,
 			   unsigned int law_memctl,
 			   unsigned int ctrl_num)
 {
 	unsigned long long base = memctl_common_params->base_address;
 	unsigned long long size = memctl_common_params->total_mem;

 	/*
 	 * If no DIMMs on this controller, do not proceed any further.
 	 */
 	if (!memctl_common_params->ndimms_present) {
 		return;
 	}

 #if !defined(CONFIG_PHYS_64BIT)
 	if (base >= CONFIG_MAX_MEM_MAPPED)
 		return;
 	if ((base + size) >= CONFIG_MAX_MEM_MAPPED)
 		size = CONFIG_MAX_MEM_MAPPED - base;
 #endif
 	if (set_ddr_laws(base, size, law_memctl) < 0) {
 		printf("%s: ERROR (ctrl #%d, TRGT ID=%x)\n", __func__, ctrl_num,
 			law_memctl);
 		return ;
 	}
 	debug("setup ddr law base = 0x%llx, size 0x%llx, TRGT_ID 0x%x\n",
 		base, size, law_memctl);
 }

 __attribute__((weak, alias("__fsl_ddr_set_lawbar"))) void
 fsl_ddr_set_lawbar(const common_timing_params_t *memctl_common_params,
 			 unsigned int memctl_interleaved,
 			 unsigned int ctrl_num);
 #endif

 void fsl_ddr_set_intl3r(const unsigned int granule_size)
 {
 #ifdef CONFIG_E6500
 	u32 *mcintl3r = (void *) (CONFIG_SYS_IMMR + 0x18004);
 	*mcintl3r = 0x80000000 | (granule_size & 0x1f);
 	debug("Enable MCINTL3R with granule size 0x%x\n", granule_size);
 #endif
 }

 u32 fsl_ddr_get_intl3r(void)
 {
 	u32 val = 0;
 #ifdef CONFIG_E6500
 	u32 *mcintl3r = (void *) (CONFIG_SYS_IMMR + 0x18004);
 	val = *mcintl3r;
 #endif
 	return val;
 }

 void board_add_ram_info(int use_default)
 {
 	struct ccsr_ddr __iomem *ddr =
 		(struct ccsr_ddr __iomem *)(CONFIG_SYS_FSL_DDR_ADDR);

 #if	defined(CONFIG_E6500) && (CONFIG_NUM_DDR_CONTROLLERS == 3)
 	u32 *mcintl3r = (void *) (CONFIG_SYS_IMMR + 0x18004);
 #endif
 #if (CONFIG_NUM_DDR_CONTROLLERS > 1)
 	uint32_t cs0_config = ddr_in32(&ddr->cs0_config);
 #endif
 	uint32_t sdram_cfg = ddr_in32(&ddr->sdram_cfg);
 	int cas_lat;

 #if CONFIG_NUM_DDR_CONTROLLERS >= 2
 	if (!(sdram_cfg & SDRAM_CFG_MEM_EN)) {
 		ddr = (void __iomem *)CONFIG_SYS_FSL_DDR2_ADDR;
 		sdram_cfg = ddr_in32(&ddr->sdram_cfg);
 	}
 #endif
 #if CONFIG_NUM_DDR_CONTROLLERS >= 3
 	if (!(sdram_cfg & SDRAM_CFG_MEM_EN)) {
 		ddr = (void __iomem *)CONFIG_SYS_FSL_DDR3_ADDR;
 		sdram_cfg = ddr_in32(&ddr->sdram_cfg);
 	}
 #endif
 	puts(" (DDR");
 	switch ((sdram_cfg & SDRAM_CFG_SDRAM_TYPE_MASK) >>
 		SDRAM_CFG_SDRAM_TYPE_SHIFT) {
 	case SDRAM_TYPE_DDR1:
 		puts("1");
 		break;
 	case SDRAM_TYPE_DDR2:
 		puts("2");
 		break;
 	case SDRAM_TYPE_DDR3:
 		puts("3");
 		break;
 	default:
 		puts("?");
 		break;
 	}

 	if (sdram_cfg & SDRAM_CFG_32_BE)
 		puts(", 32-bit");
 	else if (sdram_cfg & SDRAM_CFG_16_BE)
 		puts(", 16-bit");
 	else
 		puts(", 64-bit");

 	/* Calculate CAS latency based on timing cfg values */
 	cas_lat = ((ddr_in32(&ddr->timing_cfg_1) >> 16) & 0xf) + 1;
 	if ((ddr_in32(&ddr->timing_cfg_3) >> 12) & 1)
 		cas_lat += (8 << 1);
 	printf(", CL=%d", cas_lat >> 1);
 	if (cas_lat & 0x1)
 		puts(".5");

 	if (sdram_cfg & SDRAM_CFG_ECC_EN)
 		puts(", ECC on)");
 	else
 		puts(", ECC off)");

 #if (CONFIG_NUM_DDR_CONTROLLERS == 3)
 #ifdef CONFIG_E6500
 	if (*mcintl3r & 0x80000000) {
 		puts("\n");
 		puts("       DDR Controller Interleaving Mode: ");
 		switch (*mcintl3r & 0x1f) {
 		case FSL_DDR_3WAY_1KB_INTERLEAVING:
 			puts("3-way 1KB");
 			break;
 		case FSL_DDR_3WAY_4KB_INTERLEAVING:
 			puts("3-way 4KB");
 			break;
 		case FSL_DDR_3WAY_8KB_INTERLEAVING:
 			puts("3-way 8KB");
 			break;
 		default:
 			puts("3-way UNKNOWN");
 			break;
 		}
 	}
 #endif
 #endif
 #if (CONFIG_NUM_DDR_CONTROLLERS >= 2)
 	if (cs0_config & 0x20000000) {
 		puts("\n");
 		puts("       DDR Controller Interleaving Mode: ");

 		switch ((cs0_config >> 24) & 0xf) {
 		case FSL_DDR_CACHE_LINE_INTERLEAVING:
 			puts("cache line");
 			break;
 		case FSL_DDR_PAGE_INTERLEAVING:
 			puts("page");
 			break;
 		case FSL_DDR_BANK_INTERLEAVING:
 			puts("bank");
 			break;
 		case FSL_DDR_SUPERBANK_INTERLEAVING:
 			puts("super-bank");
 			break;
 		default:
 			puts("invalid");
 			break;
 		}
 	}
 #endif

 	if ((sdram_cfg >> 8) & 0x7f) {
 		puts("\n");
 		puts("       DDR Chip-Select Interleaving Mode: ");
 		switch(sdram_cfg >> 8 & 0x7f) {
 		case FSL_DDR_CS0_CS1_CS2_CS3:
 			puts("CS0+CS1+CS2+CS3");
 			break;
 		case FSL_DDR_CS0_CS1:
 			puts("CS0+CS1");
 			break;
 		case FSL_DDR_CS2_CS3:
 			puts("CS2+CS3");
 			break;
 		case FSL_DDR_CS0_CS1_AND_CS2_CS3:
 			puts("CS0+CS1 and CS2+CS3");
 			break;
 		default:
 			puts("invalid");
 			break;
 		}
 	}
 }
	/*
	* Copyright 2008-2012 Freescale Semiconductor, Inc.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License
	* Version 2 as published by the Free Software Foundation.
	*/

	#include <common.h>
	#ifdef CONFIG_PPC
	#include <asm/fsl_law.h>
	#endif
	#include <div64.h>

	#include <fsl_ddr.h>
	#include <fsl_immap.h>
	#include <asm/io.h>

	/* To avoid 64-bit full-divides, we factor this here */
	#define ULL_2E12 2000000000000ULL
	#define UL_5POW12 244140625UL
	#define UL_2POW13 (1UL << 13)

	#define ULL_8FS 0xFFFFFFFFULL

	/*
	* Round up mclk_ps to nearest 1 ps in memory controller code
	* if the error is 0.5ps or more.
	*
	* If an imprecise data rate is too high due to rounding error
	* propagation, compute a suitably rounded mclk_ps to compute
	* a working memory controller configuration.
	*/
	unsigned int get_memory_clk_period_ps(void)
	{
	unsigned int data_rate = get_ddr_freq(0);
	unsigned int result;

	/* Round to nearest 10ps, being careful about 64-bit multiply/divide */
	unsigned long long rem, mclk_ps = ULL_2E12;

	/* Now perform the big divide, the result fits in 32-bits */
	rem = do_div(mclk_ps, data_rate);
	result = (rem >= (data_rate >> 1)) ? mclk_ps + 1 : mclk_ps;

	return result;
	}

	/* Convert picoseconds into DRAM clock cycles (rounding up if needed). */
	unsigned int picos_to_mclk(unsigned int picos)
	{
	unsigned long long clks, clks_rem;
	unsigned long data_rate = get_ddr_freq(0);

	/* Short circuit for zero picos */
	if (!picos)
	return 0;

	/* First multiply the time by the data rate (32x32 => 64) */
	clks = picos * (unsigned long long)data_rate;
	/*
	* Now divide by 5^12 and track the 32-bit remainder, then divide
	* by 2*(2^12) using shifts (and updating the remainder).
	*/
	clks_rem = do_div(clks, UL_5POW12);
	clks_rem += (clks & (UL_2POW13-1)) * UL_5POW12;
	clks >>= 13;

	/* If we had a remainder greater than the 1ps error, then round up */
	if (clks_rem > data_rate)
	clks++;

	/* Clamp to the maximum representable value */
	if (clks > ULL_8FS)
	clks = ULL_8FS;
	return (unsigned int) clks;
	}

	unsigned int mclk_to_picos(unsigned int mclk)
	{
	return get_memory_clk_period_ps() * mclk;
	}

	#ifdef CONFIG_PPC
	void
	__fsl_ddr_set_lawbar(const common_timing_params_t *memctl_common_params,
	unsigned int law_memctl,
	unsigned int ctrl_num)
	{
	unsigned long long base = memctl_common_params->base_address;
	unsigned long long size = memctl_common_params->total_mem;

	/*
	* If no DIMMs on this controller, do not proceed any further.
	*/
	if (!memctl_common_params->ndimms_present) {
	return;
	}

	#if !defined(CONFIG_PHYS_64BIT)
	if (base >= CONFIG_MAX_MEM_MAPPED)
	return;
	if ((base + size) >= CONFIG_MAX_MEM_MAPPED)
	size = CONFIG_MAX_MEM_MAPPED - base;
	#endif
	if (set_ddr_laws(base, size, law_memctl) < 0) {
	printf("%s: ERROR (ctrl #%d, TRGT ID=%x)\n", __func__, ctrl_num,
	law_memctl);
	return ;
	}
	debug("setup ddr law base = 0x%llx, size 0x%llx, TRGT_ID 0x%x\n",
	base, size, law_memctl);
	}

	__attribute__((weak, alias("__fsl_ddr_set_lawbar"))) void
	fsl_ddr_set_lawbar(const common_timing_params_t *memctl_common_params,
	unsigned int memctl_interleaved,
	unsigned int ctrl_num);
	#endif

	void fsl_ddr_set_intl3r(const unsigned int granule_size)
	{
	#ifdef CONFIG_E6500
	u32 mcintl3r = (void ) (CONFIG_SYS_IMMR + 0x18004);
	*mcintl3r = 0x80000000 \| (granule_size & 0x1f);
	debug("Enable MCINTL3R with granule size 0x%x\n", granule_size);
	#endif
	}

	u32 fsl_ddr_get_intl3r(void)
	{
	u32 val = 0;
	#ifdef CONFIG_E6500
	u32 mcintl3r = (void ) (CONFIG_SYS_IMMR + 0x18004);
	val = *mcintl3r;
	#endif
	return val;
	}

	void board_add_ram_info(int use_default)
	{
	struct ccsr_ddr __iomem *ddr =
	(struct ccsr_ddr __iomem *)(CONFIG_SYS_FSL_DDR_ADDR);

	#if defined(CONFIG_E6500) && (CONFIG_NUM_DDR_CONTROLLERS == 3)
	u32 mcintl3r = (void ) (CONFIG_SYS_IMMR + 0x18004);
	#endif
	#if (CONFIG_NUM_DDR_CONTROLLERS > 1)
	uint32_t cs0_config = ddr_in32(&ddr->cs0_config);
	#endif
	uint32_t sdram_cfg = ddr_in32(&ddr->sdram_cfg);
	int cas_lat;

	#if CONFIG_NUM_DDR_CONTROLLERS >= 2
	if (!(sdram_cfg & SDRAM_CFG_MEM_EN)) {
	ddr = (void __iomem *)CONFIG_SYS_FSL_DDR2_ADDR;
	sdram_cfg = ddr_in32(&ddr->sdram_cfg);
	}
	#endif
	#if CONFIG_NUM_DDR_CONTROLLERS >= 3
	if (!(sdram_cfg & SDRAM_CFG_MEM_EN)) {
	ddr = (void __iomem *)CONFIG_SYS_FSL_DDR3_ADDR;
	sdram_cfg = ddr_in32(&ddr->sdram_cfg);
	}
	#endif
	puts(" (DDR");
	switch ((sdram_cfg & SDRAM_CFG_SDRAM_TYPE_MASK) >>
	SDRAM_CFG_SDRAM_TYPE_SHIFT) {
	case SDRAM_TYPE_DDR1:
	puts("1");
	break;
	case SDRAM_TYPE_DDR2:
	puts("2");
	break;
	case SDRAM_TYPE_DDR3:
	puts("3");
	break;
	default:
	puts("?");
	break;
	}

	if (sdram_cfg & SDRAM_CFG_32_BE)
	puts(", 32-bit");
	else if (sdram_cfg & SDRAM_CFG_16_BE)
	puts(", 16-bit");
	else
	puts(", 64-bit");

	/* Calculate CAS latency based on timing cfg values */
	cas_lat = ((ddr_in32(&ddr->timing_cfg_1) >> 16) & 0xf) + 1;
	if ((ddr_in32(&ddr->timing_cfg_3) >> 12) & 1)
	cas_lat += (8 << 1);
	printf(", CL=%d", cas_lat >> 1);
	if (cas_lat & 0x1)
	puts(".5");

	if (sdram_cfg & SDRAM_CFG_ECC_EN)
	puts(", ECC on)");
	else
	puts(", ECC off)");

	#if (CONFIG_NUM_DDR_CONTROLLERS == 3)
	#ifdef CONFIG_E6500
	if (*mcintl3r & 0x80000000) {
	puts("\n");
	puts(" DDR Controller Interleaving Mode: ");
	switch (*mcintl3r & 0x1f) {
	case FSL_DDR_3WAY_1KB_INTERLEAVING:
	puts("3-way 1KB");
	break;
	case FSL_DDR_3WAY_4KB_INTERLEAVING:
	puts("3-way 4KB");
	break;
	case FSL_DDR_3WAY_8KB_INTERLEAVING:
	puts("3-way 8KB");
	break;
	default:
	puts("3-way UNKNOWN");
	break;
	}
	}
	#endif
	#endif
	#if (CONFIG_NUM_DDR_CONTROLLERS >= 2)
	if (cs0_config & 0x20000000) {
	puts("\n");
	puts(" DDR Controller Interleaving Mode: ");

	switch ((cs0_config >> 24) & 0xf) {
	case FSL_DDR_CACHE_LINE_INTERLEAVING:
	puts("cache line");
	break;
	case FSL_DDR_PAGE_INTERLEAVING:
	puts("page");
	break;
	case FSL_DDR_BANK_INTERLEAVING:
	puts("bank");
	break;
	case FSL_DDR_SUPERBANK_INTERLEAVING:
	puts("super-bank");
	break;
	default:
	puts("invalid");
	break;
	}
	}
	#endif

	if ((sdram_cfg >> 8) & 0x7f) {
	puts("\n");
	puts(" DDR Chip-Select Interleaving Mode: ");
	switch(sdram_cfg >> 8 & 0x7f) {
	case FSL_DDR_CS0_CS1_CS2_CS3:
	puts("CS0+CS1+CS2+CS3");
	break;
	case FSL_DDR_CS0_CS1:
	puts("CS0+CS1");
	break;
	case FSL_DDR_CS2_CS3:
	puts("CS2+CS3");
	break;
	case FSL_DDR_CS0_CS1_AND_CS2_CS3:
	puts("CS0+CS1 and CS2+CS3");
	break;
	default:
	puts("invalid");
	break;
	}
	}
	}