drivers/i2c/omap24xx_i2c.c - platform/external/u-boot - Gitiles

 /*
  * Basic I2C functions
  *
  * Copyright (c) 2004 Texas Instruments
  *
  * This package is free software;  you can redistribute it and/or
  * modify it under the terms of the license found in the file
  * named COPYING that should have accompanied this file.
  *
  * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
  * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
  * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
  *
  * Author: Jian Zhang jzhang@ti.com, Texas Instruments
  *
  * Copyright (c) 2003 Wolfgang Denk, wd@denx.de
  * Rewritten to fit into the current U-Boot framework
  *
  * Adapted for OMAP2420 I2C, r-woodruff2@ti.com
  *
  */

 #include <common.h>

 #include <asm/arch/i2c.h>
 #include <asm/io.h>

 #include "omap24xx_i2c.h"

 DECLARE_GLOBAL_DATA_PTR;

 #define I2C_STAT_TIMEO	(1 << 31)
 #define I2C_TIMEOUT	10

 static u32 wait_for_bb(void);
 static u32 wait_for_status_mask(u16 mask);
 static void flush_fifo(void);

 /*
  * For SPL boot some boards need i2c before SDRAM is initialised so force
  * variables to live in SRAM
  */
 static struct i2c __attribute__((section (".data"))) *i2c_base =
 					(struct i2c *)I2C_DEFAULT_BASE;
 static unsigned int __attribute__((section (".data"))) bus_initialized[I2C_BUS_MAX] =
 					{ [0 ... (I2C_BUS_MAX-1)] = 0 };
 static unsigned int __attribute__((section (".data"))) current_bus = 0;

 void i2c_init(int speed, int slaveadd)
 {
 	int psc, fsscll, fssclh;
 	int hsscll = 0, hssclh = 0;
 	u32 scll, sclh;

 	/* Only handle standard, fast and high speeds */
 	if ((speed != OMAP_I2C_STANDARD) &&
 	    (speed != OMAP_I2C_FAST_MODE) &&
 	    (speed != OMAP_I2C_HIGH_SPEED)) {
 		printf("Error : I2C unsupported speed %d\n", speed);
 		return;
 	}

 	psc = I2C_IP_CLK / I2C_INTERNAL_SAMPLING_CLK;
 	psc -= 1;
 	if (psc < I2C_PSC_MIN) {
 		printf("Error : I2C unsupported prescalar %d\n", psc);
 		return;
 	}

 	if (speed == OMAP_I2C_HIGH_SPEED) {
 		/* High speed */

 		/* For first phase of HS mode */
 		fsscll = fssclh = I2C_INTERNAL_SAMPLING_CLK /
 			(2 * OMAP_I2C_FAST_MODE);

 		fsscll -= I2C_HIGHSPEED_PHASE_ONE_SCLL_TRIM;
 		fssclh -= I2C_HIGHSPEED_PHASE_ONE_SCLH_TRIM;
 		if (((fsscll < 0) || (fssclh < 0)) ||
 		    ((fsscll > 255) || (fssclh > 255))) {
 			puts("Error : I2C initializing first phase clock\n");
 			return;
 		}

 		/* For second phase of HS mode */
 		hsscll = hssclh = I2C_INTERNAL_SAMPLING_CLK / (2 * speed);

 		hsscll -= I2C_HIGHSPEED_PHASE_TWO_SCLL_TRIM;
 		hssclh -= I2C_HIGHSPEED_PHASE_TWO_SCLH_TRIM;
 		if (((fsscll < 0) || (fssclh < 0)) ||
 		    ((fsscll > 255) || (fssclh > 255))) {
 			puts("Error : I2C initializing second phase clock\n");
 			return;
 		}

 		scll = (unsigned int)hsscll << 8 | (unsigned int)fsscll;
 		sclh = (unsigned int)hssclh << 8 | (unsigned int)fssclh;

 	} else {
 		/* Standard and fast speed */
 		fsscll = fssclh = I2C_INTERNAL_SAMPLING_CLK / (2 * speed);

 		fsscll -= I2C_FASTSPEED_SCLL_TRIM;
 		fssclh -= I2C_FASTSPEED_SCLH_TRIM;
 		if (((fsscll < 0) || (fssclh < 0)) ||
 		    ((fsscll > 255) || (fssclh > 255))) {
 			puts("Error : I2C initializing clock\n");
 			return;
 		}

 		scll = (unsigned int)fsscll;
 		sclh = (unsigned int)fssclh;
 	}

 	if (gd->flags & GD_FLG_RELOC)
 		bus_initialized[current_bus] = 1;

 	if (readw(&i2c_base->con) & I2C_CON_EN) {
 		writew(0, &i2c_base->con);
 		udelay(50000);
 	}

 	writew(psc, &i2c_base->psc);
 	writew(scll, &i2c_base->scll);
 	writew(sclh, &i2c_base->sclh);

 	/* own address */
 	writew(slaveadd, &i2c_base->oa);
 	writew(I2C_CON_EN, &i2c_base->con);

 	/* have to enable intrrupts or OMAP i2c module doesn't work */
 	writew(I2C_IE_XRDY_IE | I2C_IE_RRDY_IE | I2C_IE_ARDY_IE |
 		I2C_IE_NACK_IE | I2C_IE_AL_IE, &i2c_base->ie);
 	udelay(1000);
 	flush_fifo();
 	writew(0xFFFF, &i2c_base->stat);
 	writew(0, &i2c_base->cnt);
 }

 static void flush_fifo(void)
 {	u16 stat;

 	/* note: if you try and read data when its not there or ready
 	 * you get a bus error
 	 */
 	while (1) {
 		stat = readw(&i2c_base->stat);
 		if (stat == I2C_STAT_RRDY) {
 #if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \
 	defined(CONFIG_OMAP44XX) || defined(CONFIG_AM33XX)
 			readb(&i2c_base->data);
 #else
 			readw(&i2c_base->data);
 #endif
 			writew(I2C_STAT_RRDY, &i2c_base->stat);
 			udelay(1000);
 		} else
 			break;
 	}
 }

 int i2c_probe(uchar chip)
 {
 	u32 status;
 	int res = 1; /* default = fail */

 	if (chip == readw(&i2c_base->oa))
 		return res;

 	/* wait until bus not busy */
 	status = wait_for_bb();
 	/* exit on BUS busy */
 	if (status & I2C_STAT_TIMEO)
 		return res;

 	/* try to write one byte */
 	writew(1, &i2c_base->cnt);
 	/* set slave address */
 	writew(chip, &i2c_base->sa);
 	/* stop bit needed here */
 	writew(I2C_CON_EN | I2C_CON_MST | I2C_CON_STT
 			| I2C_CON_STP, &i2c_base->con);
 	/* enough delay for the NACK bit set */
 	udelay(9000);

 	if (!(readw(&i2c_base->stat) & I2C_STAT_NACK)) {
 		res = 0;      /* success case */
 		flush_fifo();
 		writew(0xFFFF, &i2c_base->stat);
 	} else {
 		/* failure, clear sources*/
 		writew(0xFFFF, &i2c_base->stat);
 		/* finish up xfer */
 		writew(readw(&i2c_base->con) | I2C_CON_STP, &i2c_base->con);
 		status = wait_for_bb();
 		/* exit on BUS busy */
 		if (status & I2C_STAT_TIMEO)
 			return res;
 	}
 	flush_fifo();
 	/* don't allow any more data in... we don't want it. */
 	writew(0, &i2c_base->cnt);
 	writew(0xFFFF, &i2c_base->stat);
 	return res;
 }

 int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
 {
 	int i2c_error = 0, i;
 	u32 status;

 	if ((alen > 2) || (alen < 0))
 		return 1;

 	if (alen < 2) {
 		if (addr + len > 256)
 			return 1;
 	} else if (addr + len > 0xFFFF) {
 		return 1;
 	}

 	/* wait until bus not busy */
 	status = wait_for_bb();

 	/* exit on BUS busy */
 	if (status & I2C_STAT_TIMEO)
 		return 1;

 	writew((alen & 0xFF), &i2c_base->cnt);
 	/* set slave address */
 	writew(chip, &i2c_base->sa);
 	/* Clear the Tx & Rx FIFOs */
 	writew((readw(&i2c_base->buf) | I2C_RXFIFO_CLEAR |
 		I2C_TXFIFO_CLEAR), &i2c_base->buf);
 	/* no stop bit needed here */
 	writew(I2C_CON_EN | I2C_CON_MST | I2C_CON_TRX |
 		I2C_CON_STT, &i2c_base->con);

 	/* wait for Transmit ready condition */
 	status = wait_for_status_mask(I2C_STAT_XRDY | I2C_STAT_NACK);

 	if (status & (I2C_STAT_NACK | I2C_STAT_TIMEO))
 		i2c_error = 1;

 	if (!i2c_error) {
 		if (status & I2C_STAT_XRDY) {
 			switch (alen) {
 			case 2:
 				/* Send address MSByte */
 #if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \
 			defined(CONFIG_AM33XX)
 				writew(((addr >> 8) & 0xFF), &i2c_base->data);

 				/* Clearing XRDY event */
 				writew((status & I2C_STAT_XRDY),
 						&i2c_base->stat);
 				/* wait for Transmit ready condition */
 				status = wait_for_status_mask(I2C_STAT_XRDY |
 						I2C_STAT_NACK);

 				if (status & (I2C_STAT_NACK |
 						I2C_STAT_TIMEO)) {
 					i2c_error = 1;
 					break;
 				}
 #endif
 			case 1:
 #if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \
 			defined(CONFIG_AM33XX)
 				/* Send address LSByte */
 				writew((addr & 0xFF), &i2c_base->data);
 #else
 				/* Send address Short word */
 				writew((addr & 0xFFFF), &i2c_base->data);
 #endif
 				/* Clearing XRDY event */
 				writew((status & I2C_STAT_XRDY),
 					&i2c_base->stat);
 				/*wait for Transmit ready condition */
 				status = wait_for_status_mask(I2C_STAT_ARDY |
 						I2C_STAT_NACK);

 				if (status & (I2C_STAT_NACK |
 					I2C_STAT_TIMEO)) {
 					i2c_error = 1;
 					break;
 				}
 			}
 		} else
 			i2c_error = 1;
 	}

 	/* Wait for ARDY to set */
 	status = wait_for_status_mask(I2C_STAT_ARDY | I2C_STAT_NACK
 			| I2C_STAT_AL);

 	if (!i2c_error) {
 		/* set slave address */
 		writew(chip, &i2c_base->sa);
 		writew((len & 0xFF), &i2c_base->cnt);
 		/* Clear the Tx & Rx FIFOs */
 		writew((readw(&i2c_base->buf) | I2C_RXFIFO_CLEAR |
 			I2C_TXFIFO_CLEAR), &i2c_base->buf);
 		/* need stop bit here */
 		writew(I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP,
 			&i2c_base->con);

 		for (i = 0; i < len; i++) {
 			/* wait for Receive condition */
 			status = wait_for_status_mask(I2C_STAT_RRDY |
 				I2C_STAT_NACK);
 			if (status & (I2C_STAT_NACK | I2C_STAT_TIMEO)) {
 				i2c_error = 1;
 				break;
 			}

 			if (status & I2C_STAT_RRDY) {
 #if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \
 			defined(CONFIG_AM33XX)
 				buffer[i] = readb(&i2c_base->data);
 #else
 				*((u16 *)&buffer[i]) =
 					readw(&i2c_base->data) & 0xFFFF;
 				i++;
 #endif
 				writew((status & I2C_STAT_RRDY),
 					&i2c_base->stat);
 				udelay(1000);
 			} else {
 				i2c_error = 1;
 			}
 		}
 	}

 	/* Wait for ARDY to set */
 	status = wait_for_status_mask(I2C_STAT_ARDY | I2C_STAT_NACK
 			| I2C_STAT_AL);

 	if (i2c_error) {
 		writew(0, &i2c_base->con);
 		return 1;
 	}

 	writew(I2C_CON_EN, &i2c_base->con);

 	while (readw(&i2c_base->stat)
 		|| (readw(&i2c_base->con) & I2C_CON_MST)) {
 		udelay(10000);
 		writew(0xFFFF, &i2c_base->stat);
 	}

 	writew(I2C_CON_EN, &i2c_base->con);
 	flush_fifo();
 	writew(0xFFFF, &i2c_base->stat);
 	writew(0, &i2c_base->cnt);

 	return 0;
 }

 int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
 {

 	int i, i2c_error = 0;
 	u32 status;
 	u16 writelen;

 	if (alen > 2)
 		return 1;

 	if (alen < 2) {
 		if (addr + len > 256)
 			return 1;
 	} else if (addr + len > 0xFFFF) {
 		return 1;
 	}

 	/* wait until bus not busy */
 	status = wait_for_bb();

 	/* exiting on BUS busy */
 	if (status & I2C_STAT_TIMEO)
 		return 1;

 	writelen = (len & 0xFFFF) + alen;

 	/* two bytes */
 	writew((writelen & 0xFFFF), &i2c_base->cnt);
 	/* Clear the Tx & Rx FIFOs */
 	writew((readw(&i2c_base->buf) | I2C_RXFIFO_CLEAR |
 			I2C_TXFIFO_CLEAR), &i2c_base->buf);
 	/* set slave address */
 	writew(chip, &i2c_base->sa);
 	/* stop bit needed here */
 	writew(I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX |
 		I2C_CON_STP, &i2c_base->con);

 	/* wait for Transmit ready condition */
 	status = wait_for_status_mask(I2C_STAT_XRDY | I2C_STAT_NACK);

 	if (status & (I2C_STAT_NACK | I2C_STAT_TIMEO))
 		i2c_error = 1;

 	if (!i2c_error) {
 		if (status & I2C_STAT_XRDY) {
 			switch (alen) {
 #if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \
 			defined(CONFIG_AM33XX)
 			case 2:
 				/* send out MSB byte */
 				writeb(((addr >> 8) & 0xFF), &i2c_base->data);
 #else
 				writeb((addr  & 0xFFFF), &i2c_base->data);
 				break;
 #endif
 				/* Clearing XRDY event */
 				writew((status & I2C_STAT_XRDY),
 					&i2c_base->stat);
 				/*waiting for Transmit ready * condition */
 				status = wait_for_status_mask(I2C_STAT_XRDY |
 						I2C_STAT_NACK);

 				if (status & (I2C_STAT_NACK | I2C_STAT_TIMEO)) {
 					i2c_error = 1;
 					break;
 				}
 			case 1:
 #if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \
 			defined(CONFIG_AM33XX)
 				/* send out MSB byte */
 				writeb((addr  & 0xFF), &i2c_base->data);
 #else
 				writew(((buffer[0] << 8) | (addr & 0xFF)),
 					&i2c_base->data);
 #endif
 			}

 			/* Clearing XRDY event */
 			writew((status & I2C_STAT_XRDY), &i2c_base->stat);
 		}

 		/* waiting for Transmit ready condition */
 		status = wait_for_status_mask(I2C_STAT_XRDY | I2C_STAT_NACK);

 		if (status & (I2C_STAT_NACK | I2C_STAT_TIMEO))
 			i2c_error = 1;

 		if (!i2c_error) {
 			for (i = ((alen > 1) ? 0 : 1); i < len; i++) {
 				if (status & I2C_STAT_XRDY) {
 #if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \
 				defined(CONFIG_AM33XX)
 					writeb((buffer[i] & 0xFF),
 						&i2c_base->data);
 #else
 					writew((((buffer[i] << 8) |
 					buffer[i + 1]) & 0xFFFF),
 						&i2c_base->data);
 					i++;
 #endif
 				} else
 					i2c_error = 1;
 					/* Clearing XRDY event */
 					writew((status & I2C_STAT_XRDY),
 						&i2c_base->stat);
 					/* waiting for XRDY condition */
 					status = wait_for_status_mask(
 						I2C_STAT_XRDY |
 						I2C_STAT_ARDY |
 						I2C_STAT_NACK);
 					if (status & (I2C_STAT_NACK |
 						I2C_STAT_TIMEO)) {
 						i2c_error = 1;
 						break;
 					}
 					if (status & I2C_STAT_ARDY)
 						break;
 			}
 		}
 	}

 	status = wait_for_status_mask(I2C_STAT_ARDY | I2C_STAT_NACK |
 				I2C_STAT_AL);

 	if (status & (I2C_STAT_NACK | I2C_STAT_TIMEO))
 		i2c_error = 1;

 	if (i2c_error) {
 		writew(0, &i2c_base->con);
 		return 1;
 	}

 	if (!i2c_error) {
 		int eout = 200;

 		writew(I2C_CON_EN, &i2c_base->con);
 		while ((status = readw(&i2c_base->stat)) ||
 				(readw(&i2c_base->con) & I2C_CON_MST)) {
 			udelay(1000);
 			/* have to read to clear intrrupt */
 			writew(0xFFFF, &i2c_base->stat);
 			if (--eout == 0)
 				/* better leave with error than hang */
 				break;
 		}
 	}

 	flush_fifo();
 	writew(0xFFFF, &i2c_base->stat);
 	writew(0, &i2c_base->cnt);
 	return 0;
 }

 static u32 wait_for_bb(void)
 {
 	int timeout = I2C_TIMEOUT;
 	u32 stat;

 	while ((stat = readw(&i2c_base->stat) & I2C_STAT_BB) && timeout--) {
 		writew(stat, &i2c_base->stat);
 		udelay(1000);
 	}

 	if (timeout <= 0) {
 		printf("timed out in wait_for_bb: I2C_STAT=%x\n",
 			readw(&i2c_base->stat));
 		stat |= I2C_STAT_TIMEO;
 	}
 	writew(0xFFFF, &i2c_base->stat);	 /* clear delayed stuff*/
 	return stat;
 }

 static u32 wait_for_status_mask(u16 mask)
 {
 	u32 status;
 	int timeout = I2C_TIMEOUT;

 	do {
 		udelay(1000);
 		status = readw(&i2c_base->stat);
 	} while (!(status & mask) && timeout--);

 	if (timeout <= 0) {
 		printf("timed out in wait_for_status_mask: I2C_STAT=%x\n",
 			readw(&i2c_base->stat));
 		writew(0xFFFF, &i2c_base->stat);
 		status |= I2C_STAT_TIMEO;
 	}
 	return status;
 }

 int i2c_set_bus_num(unsigned int bus)
 {
 	if ((bus < 0) || (bus >= I2C_BUS_MAX)) {
 		printf("Bad bus: %d\n", bus);
 		return -1;
 	}

 #if I2C_BUS_MAX == 3
 	if (bus == 2)
 		i2c_base = (struct i2c *)I2C_BASE3;
 	else
 #endif
 	if (bus == 1)
 		i2c_base = (struct i2c *)I2C_BASE2;
 	else
 		i2c_base = (struct i2c *)I2C_BASE1;

 	current_bus = bus;

 	if (!bus_initialized[current_bus])
 		i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);

 	return 0;
 }

 int i2c_get_bus_num(void)
 {
 	return (int) current_bus;
 }
	/*
	* Basic I2C functions
	*
	* Copyright (c) 2004 Texas Instruments
	*
	* This package is free software; you can redistribute it and/or
	* modify it under the terms of the license found in the file
	* named COPYING that should have accompanied this file.
	*
	* THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
	* IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
	* WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
	*
	* Author: Jian Zhang jzhang@ti.com, Texas Instruments
	*
	* Copyright (c) 2003 Wolfgang Denk, wd@denx.de
	* Rewritten to fit into the current U-Boot framework
	*
	* Adapted for OMAP2420 I2C, r-woodruff2@ti.com
	*
	*/

	#include <common.h>

	#include <asm/arch/i2c.h>
	#include <asm/io.h>

	#include "omap24xx_i2c.h"

	DECLARE_GLOBAL_DATA_PTR;

	#define I2C_STAT_TIMEO (1 << 31)
	#define I2C_TIMEOUT 10

	static u32 wait_for_bb(void);
	static u32 wait_for_status_mask(u16 mask);
	static void flush_fifo(void);

	/*
	* For SPL boot some boards need i2c before SDRAM is initialised so force
	* variables to live in SRAM
	*/
	static struct i2c __attribute__((section (".data"))) *i2c_base =
	(struct i2c *)I2C_DEFAULT_BASE;
	static unsigned int __attribute__((section (".data"))) bus_initialized[I2C_BUS_MAX] =
	{ [0 ... (I2C_BUS_MAX-1)] = 0 };
	static unsigned int __attribute__((section (".data"))) current_bus = 0;

	void i2c_init(int speed, int slaveadd)
	{
	int psc, fsscll, fssclh;
	int hsscll = 0, hssclh = 0;
	u32 scll, sclh;

	/* Only handle standard, fast and high speeds */
	if ((speed != OMAP_I2C_STANDARD) &&
	(speed != OMAP_I2C_FAST_MODE) &&
	(speed != OMAP_I2C_HIGH_SPEED)) {
	printf("Error : I2C unsupported speed %d\n", speed);
	return;
	}

	psc = I2C_IP_CLK / I2C_INTERNAL_SAMPLING_CLK;
	psc -= 1;
	if (psc < I2C_PSC_MIN) {
	printf("Error : I2C unsupported prescalar %d\n", psc);
	return;
	}

	if (speed == OMAP_I2C_HIGH_SPEED) {
	/* High speed */

	/* For first phase of HS mode */
	fsscll = fssclh = I2C_INTERNAL_SAMPLING_CLK /
	(2 * OMAP_I2C_FAST_MODE);

	fsscll -= I2C_HIGHSPEED_PHASE_ONE_SCLL_TRIM;
	fssclh -= I2C_HIGHSPEED_PHASE_ONE_SCLH_TRIM;
	if (((fsscll < 0) \|\| (fssclh < 0)) \|\|
	((fsscll > 255) \|\| (fssclh > 255))) {
	puts("Error : I2C initializing first phase clock\n");
	return;
	}

	/* For second phase of HS mode */
	hsscll = hssclh = I2C_INTERNAL_SAMPLING_CLK / (2 * speed);

	hsscll -= I2C_HIGHSPEED_PHASE_TWO_SCLL_TRIM;
	hssclh -= I2C_HIGHSPEED_PHASE_TWO_SCLH_TRIM;
	if (((fsscll < 0) \|\| (fssclh < 0)) \|\|
	((fsscll > 255) \|\| (fssclh > 255))) {
	puts("Error : I2C initializing second phase clock\n");
	return;
	}

	scll = (unsigned int)hsscll << 8 \| (unsigned int)fsscll;
	sclh = (unsigned int)hssclh << 8 \| (unsigned int)fssclh;

	} else {
	/* Standard and fast speed */
	fsscll = fssclh = I2C_INTERNAL_SAMPLING_CLK / (2 * speed);

	fsscll -= I2C_FASTSPEED_SCLL_TRIM;
	fssclh -= I2C_FASTSPEED_SCLH_TRIM;
	if (((fsscll < 0) \|\| (fssclh < 0)) \|\|
	((fsscll > 255) \|\| (fssclh > 255))) {
	puts("Error : I2C initializing clock\n");
	return;
	}

	scll = (unsigned int)fsscll;
	sclh = (unsigned int)fssclh;
	}

	if (gd->flags & GD_FLG_RELOC)
	bus_initialized[current_bus] = 1;

	if (readw(&i2c_base->con) & I2C_CON_EN) {
	writew(0, &i2c_base->con);
	udelay(50000);
	}

	writew(psc, &i2c_base->psc);
	writew(scll, &i2c_base->scll);
	writew(sclh, &i2c_base->sclh);

	/* own address */
	writew(slaveadd, &i2c_base->oa);
	writew(I2C_CON_EN, &i2c_base->con);

	/* have to enable intrrupts or OMAP i2c module doesn't work */
	writew(I2C_IE_XRDY_IE \| I2C_IE_RRDY_IE \| I2C_IE_ARDY_IE \|
	I2C_IE_NACK_IE \| I2C_IE_AL_IE, &i2c_base->ie);
	udelay(1000);
	flush_fifo();
	writew(0xFFFF, &i2c_base->stat);
	writew(0, &i2c_base->cnt);
	}

	static void flush_fifo(void)
	{ u16 stat;

	/* note: if you try and read data when its not there or ready
	* you get a bus error
	*/
	while (1) {
	stat = readw(&i2c_base->stat);
	if (stat == I2C_STAT_RRDY) {
	#if defined(CONFIG_OMAP243X) \|\| defined(CONFIG_OMAP34XX) \|\| \
	defined(CONFIG_OMAP44XX) \|\| defined(CONFIG_AM33XX)
	readb(&i2c_base->data);
	#else
	readw(&i2c_base->data);
	#endif
	writew(I2C_STAT_RRDY, &i2c_base->stat);
	udelay(1000);
	} else
	break;
	}
	}

	int i2c_probe(uchar chip)
	{
	u32 status;
	int res = 1; /* default = fail */

	if (chip == readw(&i2c_base->oa))
	return res;

	/* wait until bus not busy */
	status = wait_for_bb();
	/* exit on BUS busy */
	if (status & I2C_STAT_TIMEO)
	return res;

	/* try to write one byte */
	writew(1, &i2c_base->cnt);
	/* set slave address */
	writew(chip, &i2c_base->sa);
	/* stop bit needed here */
	writew(I2C_CON_EN \| I2C_CON_MST \| I2C_CON_STT
	\| I2C_CON_STP, &i2c_base->con);
	/* enough delay for the NACK bit set */
	udelay(9000);

	if (!(readw(&i2c_base->stat) & I2C_STAT_NACK)) {
	res = 0; /* success case */
	flush_fifo();
	writew(0xFFFF, &i2c_base->stat);
	} else {
	/* failure, clear sources*/
	writew(0xFFFF, &i2c_base->stat);
	/* finish up xfer */
	writew(readw(&i2c_base->con) \| I2C_CON_STP, &i2c_base->con);
	status = wait_for_bb();
	/* exit on BUS busy */
	if (status & I2C_STAT_TIMEO)
	return res;
	}
	flush_fifo();
	/* don't allow any more data in... we don't want it. */
	writew(0, &i2c_base->cnt);
	writew(0xFFFF, &i2c_base->stat);
	return res;
	}

	int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
	{
	int i2c_error = 0, i;
	u32 status;

	if ((alen > 2) \|\| (alen < 0))
	return 1;

	if (alen < 2) {
	if (addr + len > 256)
	return 1;
	} else if (addr + len > 0xFFFF) {
	return 1;
	}

	/* wait until bus not busy */
	status = wait_for_bb();

	/* exit on BUS busy */
	if (status & I2C_STAT_TIMEO)
	return 1;

	writew((alen & 0xFF), &i2c_base->cnt);
	/* set slave address */
	writew(chip, &i2c_base->sa);
	/* Clear the Tx & Rx FIFOs */
	writew((readw(&i2c_base->buf) \| I2C_RXFIFO_CLEAR \|
	I2C_TXFIFO_CLEAR), &i2c_base->buf);
	/* no stop bit needed here */
	writew(I2C_CON_EN \| I2C_CON_MST \| I2C_CON_TRX \|
	I2C_CON_STT, &i2c_base->con);

	/* wait for Transmit ready condition */
	status = wait_for_status_mask(I2C_STAT_XRDY \| I2C_STAT_NACK);

	if (status & (I2C_STAT_NACK \| I2C_STAT_TIMEO))
	i2c_error = 1;

	if (!i2c_error) {
	if (status & I2C_STAT_XRDY) {
	switch (alen) {
	case 2:
	/* Send address MSByte */
	#if defined(CONFIG_OMAP243X) \|\| defined(CONFIG_OMAP34XX) \|\| \
	defined(CONFIG_AM33XX)
	writew(((addr >> 8) & 0xFF), &i2c_base->data);

	/* Clearing XRDY event */
	writew((status & I2C_STAT_XRDY),
	&i2c_base->stat);
	/* wait for Transmit ready condition */
	status = wait_for_status_mask(I2C_STAT_XRDY \|
	I2C_STAT_NACK);

	if (status & (I2C_STAT_NACK \|
	I2C_STAT_TIMEO)) {
	i2c_error = 1;
	break;
	}
	#endif
	case 1:
	#if defined(CONFIG_OMAP243X) \|\| defined(CONFIG_OMAP34XX) \|\| \
	defined(CONFIG_AM33XX)
	/* Send address LSByte */
	writew((addr & 0xFF), &i2c_base->data);
	#else
	/* Send address Short word */
	writew((addr & 0xFFFF), &i2c_base->data);
	#endif
	/* Clearing XRDY event */
	writew((status & I2C_STAT_XRDY),
	&i2c_base->stat);
	/wait for Transmit ready condition /
	status = wait_for_status_mask(I2C_STAT_ARDY \|
	I2C_STAT_NACK);

	if (status & (I2C_STAT_NACK \|
	I2C_STAT_TIMEO)) {
	i2c_error = 1;
	break;
	}
	}
	} else
	i2c_error = 1;
	}

	/* Wait for ARDY to set */
	status = wait_for_status_mask(I2C_STAT_ARDY \| I2C_STAT_NACK
	\| I2C_STAT_AL);

	if (!i2c_error) {
	/* set slave address */
	writew(chip, &i2c_base->sa);
	writew((len & 0xFF), &i2c_base->cnt);
	/* Clear the Tx & Rx FIFOs */
	writew((readw(&i2c_base->buf) \| I2C_RXFIFO_CLEAR \|
	I2C_TXFIFO_CLEAR), &i2c_base->buf);
	/* need stop bit here */
	writew(I2C_CON_EN \| I2C_CON_MST \| I2C_CON_STT \| I2C_CON_STP,
	&i2c_base->con);

	for (i = 0; i < len; i++) {
	/* wait for Receive condition */
	status = wait_for_status_mask(I2C_STAT_RRDY \|
	I2C_STAT_NACK);
	if (status & (I2C_STAT_NACK \| I2C_STAT_TIMEO)) {
	i2c_error = 1;
	break;
	}

	if (status & I2C_STAT_RRDY) {
	#if defined(CONFIG_OMAP243X) \|\| defined(CONFIG_OMAP34XX) \|\| \
	defined(CONFIG_AM33XX)
	buffer[i] = readb(&i2c_base->data);
	#else
	((u16 )&buffer[i]) =
	readw(&i2c_base->data) & 0xFFFF;
	i++;
	#endif
	writew((status & I2C_STAT_RRDY),
	&i2c_base->stat);
	udelay(1000);
	} else {
	i2c_error = 1;
	}
	}
	}

	/* Wait for ARDY to set */
	status = wait_for_status_mask(I2C_STAT_ARDY \| I2C_STAT_NACK
	\| I2C_STAT_AL);

	if (i2c_error) {
	writew(0, &i2c_base->con);
	return 1;
	}

	writew(I2C_CON_EN, &i2c_base->con);

	while (readw(&i2c_base->stat)
	\|\| (readw(&i2c_base->con) & I2C_CON_MST)) {
	udelay(10000);
	writew(0xFFFF, &i2c_base->stat);
	}

	writew(I2C_CON_EN, &i2c_base->con);
	flush_fifo();
	writew(0xFFFF, &i2c_base->stat);
	writew(0, &i2c_base->cnt);

	return 0;
	}

	int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
	{

	int i, i2c_error = 0;
	u32 status;
	u16 writelen;

	if (alen > 2)
	return 1;

	if (alen < 2) {
	if (addr + len > 256)
	return 1;
	} else if (addr + len > 0xFFFF) {
	return 1;
	}

	/* wait until bus not busy */
	status = wait_for_bb();

	/* exiting on BUS busy */
	if (status & I2C_STAT_TIMEO)
	return 1;

	writelen = (len & 0xFFFF) + alen;

	/* two bytes */
	writew((writelen & 0xFFFF), &i2c_base->cnt);
	/* Clear the Tx & Rx FIFOs */
	writew((readw(&i2c_base->buf) \| I2C_RXFIFO_CLEAR \|
	I2C_TXFIFO_CLEAR), &i2c_base->buf);
	/* set slave address */
	writew(chip, &i2c_base->sa);
	/* stop bit needed here */
	writew(I2C_CON_EN \| I2C_CON_MST \| I2C_CON_STT \| I2C_CON_TRX \|
	I2C_CON_STP, &i2c_base->con);

	/* wait for Transmit ready condition */
	status = wait_for_status_mask(I2C_STAT_XRDY \| I2C_STAT_NACK);

	if (status & (I2C_STAT_NACK \| I2C_STAT_TIMEO))
	i2c_error = 1;

	if (!i2c_error) {
	if (status & I2C_STAT_XRDY) {
	switch (alen) {
	#if defined(CONFIG_OMAP243X) \|\| defined(CONFIG_OMAP34XX) \|\| \
	defined(CONFIG_AM33XX)
	case 2:
	/* send out MSB byte */
	writeb(((addr >> 8) & 0xFF), &i2c_base->data);
	#else
	writeb((addr & 0xFFFF), &i2c_base->data);
	break;
	#endif
	/* Clearing XRDY event */
	writew((status & I2C_STAT_XRDY),
	&i2c_base->stat);
	/waiting for Transmit ready condition */
	status = wait_for_status_mask(I2C_STAT_XRDY \|
	I2C_STAT_NACK);

	if (status & (I2C_STAT_NACK \| I2C_STAT_TIMEO)) {
	i2c_error = 1;
	break;
	}
	case 1:
	#if defined(CONFIG_OMAP243X) \|\| defined(CONFIG_OMAP34XX) \|\| \
	defined(CONFIG_AM33XX)
	/* send out MSB byte */
	writeb((addr & 0xFF), &i2c_base->data);
	#else
	writew(((buffer[0] << 8) \| (addr & 0xFF)),
	&i2c_base->data);
	#endif
	}

	/* Clearing XRDY event */
	writew((status & I2C_STAT_XRDY), &i2c_base->stat);
	}

	/* waiting for Transmit ready condition */
	status = wait_for_status_mask(I2C_STAT_XRDY \| I2C_STAT_NACK);

	if (status & (I2C_STAT_NACK \| I2C_STAT_TIMEO))
	i2c_error = 1;

	if (!i2c_error) {
	for (i = ((alen > 1) ? 0 : 1); i < len; i++) {
	if (status & I2C_STAT_XRDY) {
	#if defined(CONFIG_OMAP243X) \|\| defined(CONFIG_OMAP34XX) \|\| \
	defined(CONFIG_AM33XX)
	writeb((buffer[i] & 0xFF),
	&i2c_base->data);
	#else
	writew((((buffer[i] << 8) \|
	buffer[i + 1]) & 0xFFFF),
	&i2c_base->data);
	i++;
	#endif
	} else
	i2c_error = 1;
	/* Clearing XRDY event */
	writew((status & I2C_STAT_XRDY),
	&i2c_base->stat);
	/* waiting for XRDY condition */
	status = wait_for_status_mask(
	I2C_STAT_XRDY \|
	I2C_STAT_ARDY \|
	I2C_STAT_NACK);
	if (status & (I2C_STAT_NACK \|
	I2C_STAT_TIMEO)) {
	i2c_error = 1;
	break;
	}
	if (status & I2C_STAT_ARDY)
	break;
	}
	}
	}

	status = wait_for_status_mask(I2C_STAT_ARDY \| I2C_STAT_NACK \|
	I2C_STAT_AL);

	if (status & (I2C_STAT_NACK \| I2C_STAT_TIMEO))
	i2c_error = 1;

	if (i2c_error) {
	writew(0, &i2c_base->con);
	return 1;
	}

	if (!i2c_error) {
	int eout = 200;

	writew(I2C_CON_EN, &i2c_base->con);
	while ((status = readw(&i2c_base->stat)) \|\|
	(readw(&i2c_base->con) & I2C_CON_MST)) {
	udelay(1000);
	/* have to read to clear intrrupt */
	writew(0xFFFF, &i2c_base->stat);
	if (--eout == 0)
	/* better leave with error than hang */
	break;
	}
	}

	flush_fifo();
	writew(0xFFFF, &i2c_base->stat);
	writew(0, &i2c_base->cnt);
	return 0;
	}

	static u32 wait_for_bb(void)
	{
	int timeout = I2C_TIMEOUT;
	u32 stat;

	while ((stat = readw(&i2c_base->stat) & I2C_STAT_BB) && timeout--) {
	writew(stat, &i2c_base->stat);
	udelay(1000);
	}

	if (timeout <= 0) {
	printf("timed out in wait_for_bb: I2C_STAT=%x\n",
	readw(&i2c_base->stat));
	stat \|= I2C_STAT_TIMEO;
	}
	writew(0xFFFF, &i2c_base->stat); /* clear delayed stuff*/
	return stat;
	}

	static u32 wait_for_status_mask(u16 mask)
	{
	u32 status;
	int timeout = I2C_TIMEOUT;

	do {
	udelay(1000);
	status = readw(&i2c_base->stat);
	} while (!(status & mask) && timeout--);

	if (timeout <= 0) {
	printf("timed out in wait_for_status_mask: I2C_STAT=%x\n",
	readw(&i2c_base->stat));
	writew(0xFFFF, &i2c_base->stat);
	status \|= I2C_STAT_TIMEO;
	}
	return status;
	}

	int i2c_set_bus_num(unsigned int bus)
	{
	if ((bus < 0) \|\| (bus >= I2C_BUS_MAX)) {
	printf("Bad bus: %d\n", bus);
	return -1;
	}

	#if I2C_BUS_MAX == 3
	if (bus == 2)
	i2c_base = (struct i2c *)I2C_BASE3;
	else
	#endif
	if (bus == 1)
	i2c_base = (struct i2c *)I2C_BASE2;
	else
	i2c_base = (struct i2c *)I2C_BASE1;

	current_bus = bus;

	if (!bus_initialized[current_bus])
	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);

	return 0;
	}

	int i2c_get_bus_num(void)
	{
	return (int) current_bus;
	}