| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * Copyright 2019 NXP |
| */ |
| |
| #ifndef PCA9450_H_ |
| #define PCA9450_H_ |
| |
| #define PCA9450_REGULATOR_DRIVER "pca9450_regulator" |
| |
| enum { |
| PCA9450_REG_DEV_ID = 0x00, |
| PCA9450_INT1 = 0x01, |
| PCA9450_INT1_MSK = 0x02, |
| PCA9450_STATUS1 = 0x03, |
| PCA9450_STATUS2 = 0x04, |
| PCA9450_PWRON_STAT = 0x05, |
| PCA9450_SW_RST = 0x06, |
| PCA9450_PWR_CTRL = 0x07, |
| PCA9450_RESET_CTRL = 0x08, |
| PCA9450_CONFIG1 = 0x09, |
| PCA9450_CONFIG2 = 0x0A, |
| PCA9450_BUCK123_DVS = 0x0C, |
| PCA9450_BUCK1OUT_LIMIT = 0x0D, |
| PCA9450_BUCK2OUT_LIMIT = 0x0E, |
| PCA9450_BUCK3OUT_LIMIT = 0x0F, |
| PCA9450_BUCK1CTRL = 0x10, |
| PCA9450_BUCK1OUT_DVS0 = 0x11, |
| PCA9450_BUCK1OUT_DVS1 = 0x12, |
| PCA9450_BUCK2CTRL = 0x13, |
| PCA9450_BUCK2OUT_DVS0 = 0x14, |
| PCA9450_BUCK2OUT_DVS1 = 0x15, |
| PCA9450_BUCK3CTRL = 0x16, |
| PCA9450_BUCK3OUT_DVS0 = 0x17, |
| PCA9450_BUCK3OUT_DVS1 = 0x18, |
| PCA9450_BUCK4CTRL = 0x19, |
| PCA9450_BUCK4OUT = 0x1A, |
| PCA9450_BUCK5CTRL = 0x1B, |
| PCA9450_BUCK5OUT = 0x1C, |
| PCA9450_BUCK6CTRL = 0x1D, |
| PCA9450_BUCK6OUT = 0x1E, |
| PCA9450_LDO_AD_CTRL = 0x20, |
| PCA9450_LDO1CTRL = 0x21, |
| PCA9450_LDO2CTRL = 0x22, |
| PCA9450_LDO3CTRL = 0x23, |
| PCA9450_LDO4CTRL = 0x24, |
| PCA9450_LDO5CTRL_L = 0x25, |
| PCA9450_LDO5CTRL_H = 0x26, |
| PCA9450_LOADSW_CTRL = 0x2A, |
| PCA9450_VRFLT1_STS = 0x2B, |
| PCA9450_VRFLT2_STS = 0x2C, |
| PCA9450_VRFLT1_MASK = 0x2D, |
| PCA9450_VRFLT2_MASK = 0x2E, |
| PCA9450_REG_NUM, |
| }; |
| |
| int power_pca9450_init(unsigned char bus, unsigned char addr); |
| |
| #endif |