| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2019 Rockchip Electronics Co., Ltd |
| */ |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <log.h> |
| #include <dm/pinctrl.h> |
| #include <regmap.h> |
| #include <syscon.h> |
| #include <linux/bitops.h> |
| |
| #include "pinctrl-rockchip.h" |
| |
| static struct rockchip_mux_recalced_data rv1108_mux_recalced_data[] = { |
| { |
| .num = 1, |
| .pin = 0, |
| .reg = 0x418, |
| .bit = 0, |
| .mask = 0x3 |
| }, { |
| .num = 1, |
| .pin = 1, |
| .reg = 0x418, |
| .bit = 2, |
| .mask = 0x3 |
| }, { |
| .num = 1, |
| .pin = 2, |
| .reg = 0x418, |
| .bit = 4, |
| .mask = 0x3 |
| }, { |
| .num = 1, |
| .pin = 3, |
| .reg = 0x418, |
| .bit = 6, |
| .mask = 0x3 |
| }, { |
| .num = 1, |
| .pin = 4, |
| .reg = 0x418, |
| .bit = 8, |
| .mask = 0x3 |
| }, { |
| .num = 1, |
| .pin = 5, |
| .reg = 0x418, |
| .bit = 10, |
| .mask = 0x3 |
| }, { |
| .num = 1, |
| .pin = 6, |
| .reg = 0x418, |
| .bit = 12, |
| .mask = 0x3 |
| }, { |
| .num = 1, |
| .pin = 7, |
| .reg = 0x418, |
| .bit = 14, |
| .mask = 0x3 |
| }, { |
| .num = 1, |
| .pin = 8, |
| .reg = 0x41c, |
| .bit = 0, |
| .mask = 0x3 |
| }, { |
| .num = 1, |
| .pin = 9, |
| .reg = 0x41c, |
| .bit = 2, |
| .mask = 0x3 |
| }, |
| }; |
| |
| static int rv1108_set_mux(struct rockchip_pin_bank *bank, int pin, int mux) |
| { |
| struct rockchip_pinctrl_priv *priv = bank->priv; |
| int iomux_num = (pin / 8); |
| struct regmap *regmap; |
| int reg, ret, mask, mux_type; |
| u8 bit; |
| u32 data; |
| |
| regmap = (bank->iomux[iomux_num].type & IOMUX_SOURCE_PMU) |
| ? priv->regmap_pmu : priv->regmap_base; |
| |
| /* get basic quadrupel of mux registers and the correct reg inside */ |
| mux_type = bank->iomux[iomux_num].type; |
| reg = bank->iomux[iomux_num].offset; |
| reg += rockchip_get_mux_data(mux_type, pin, &bit, &mask); |
| |
| if (bank->recalced_mask & BIT(pin)) |
| rockchip_get_recalced_mux(bank, pin, ®, &bit, &mask); |
| |
| data = (mask << (bit + 16)); |
| data |= (mux & mask) << bit; |
| ret = regmap_write(regmap, reg, data); |
| |
| return ret; |
| } |
| |
| #define RV1108_PULL_PMU_OFFSET 0x10 |
| #define RV1108_PULL_OFFSET 0x110 |
| |
| static void rv1108_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank, |
| int pin_num, struct regmap **regmap, |
| int *reg, u8 *bit) |
| { |
| struct rockchip_pinctrl_priv *priv = bank->priv; |
| |
| /* The first 24 pins of the first bank are located in PMU */ |
| if (bank->bank_num == 0) { |
| *regmap = priv->regmap_pmu; |
| *reg = RV1108_PULL_PMU_OFFSET; |
| } else { |
| *reg = RV1108_PULL_OFFSET; |
| *regmap = priv->regmap_base; |
| /* correct the offset, as we're starting with the 2nd bank */ |
| *reg -= 0x10; |
| *reg += bank->bank_num * ROCKCHIP_PULL_BANK_STRIDE; |
| } |
| |
| *reg += ((pin_num / ROCKCHIP_PULL_PINS_PER_REG) * 4); |
| *bit = (pin_num % ROCKCHIP_PULL_PINS_PER_REG); |
| *bit *= ROCKCHIP_PULL_BITS_PER_PIN; |
| } |
| |
| static int rv1108_set_pull(struct rockchip_pin_bank *bank, |
| int pin_num, int pull) |
| { |
| struct regmap *regmap; |
| int reg, ret; |
| u8 bit, type; |
| u32 data; |
| |
| if (pull == PIN_CONFIG_BIAS_PULL_PIN_DEFAULT) |
| return -ENOTSUPP; |
| |
| rv1108_calc_pull_reg_and_bit(bank, pin_num, ®map, ®, &bit); |
| type = bank->pull_type[pin_num / 8]; |
| ret = rockchip_translate_pull_value(type, pull); |
| if (ret < 0) { |
| debug("unsupported pull setting %d\n", pull); |
| return ret; |
| } |
| |
| /* enable the write to the equivalent lower bits */ |
| data = ((1 << ROCKCHIP_PULL_BITS_PER_PIN) - 1) << (bit + 16); |
| |
| data |= (ret << bit); |
| ret = regmap_write(regmap, reg, data); |
| |
| return ret; |
| } |
| |
| #define RV1108_DRV_PMU_OFFSET 0x20 |
| #define RV1108_DRV_GRF_OFFSET 0x210 |
| |
| static void rv1108_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank, |
| int pin_num, struct regmap **regmap, |
| int *reg, u8 *bit) |
| { |
| struct rockchip_pinctrl_priv *priv = bank->priv; |
| |
| /* The first 24 pins of the first bank are located in PMU */ |
| if (bank->bank_num == 0) { |
| *regmap = priv->regmap_pmu; |
| *reg = RV1108_DRV_PMU_OFFSET; |
| } else { |
| *regmap = priv->regmap_base; |
| *reg = RV1108_DRV_GRF_OFFSET; |
| |
| /* correct the offset, as we're starting with the 2nd bank */ |
| *reg -= 0x10; |
| *reg += bank->bank_num * ROCKCHIP_DRV_BANK_STRIDE; |
| } |
| |
| *reg += ((pin_num / ROCKCHIP_DRV_PINS_PER_REG) * 4); |
| *bit = pin_num % ROCKCHIP_DRV_PINS_PER_REG; |
| *bit *= ROCKCHIP_DRV_BITS_PER_PIN; |
| } |
| |
| static int rv1108_set_drive(struct rockchip_pin_bank *bank, |
| int pin_num, int strength) |
| { |
| struct regmap *regmap; |
| int reg, ret; |
| u32 data; |
| u8 bit; |
| int type = bank->drv[pin_num / 8].drv_type; |
| |
| rv1108_calc_drv_reg_and_bit(bank, pin_num, ®map, ®, &bit); |
| ret = rockchip_translate_drive_value(type, strength); |
| if (ret < 0) { |
| debug("unsupported driver strength %d\n", strength); |
| return ret; |
| } |
| |
| /* enable the write to the equivalent lower bits */ |
| data = ((1 << ROCKCHIP_DRV_BITS_PER_PIN) - 1) << (bit + 16); |
| |
| data |= (ret << bit); |
| ret = regmap_write(regmap, reg, data); |
| return ret; |
| } |
| |
| #define RV1108_SCHMITT_PMU_OFFSET 0x30 |
| #define RV1108_SCHMITT_GRF_OFFSET 0x388 |
| #define RV1108_SCHMITT_BANK_STRIDE 8 |
| #define RV1108_SCHMITT_PINS_PER_GRF_REG 16 |
| #define RV1108_SCHMITT_PINS_PER_PMU_REG 8 |
| |
| static int rv1108_calc_schmitt_reg_and_bit(struct rockchip_pin_bank *bank, |
| int pin_num, |
| struct regmap **regmap, |
| int *reg, u8 *bit) |
| { |
| struct rockchip_pinctrl_priv *priv = bank->priv; |
| int pins_per_reg; |
| |
| if (bank->bank_num == 0) { |
| *regmap = priv->regmap_pmu; |
| *reg = RV1108_SCHMITT_PMU_OFFSET; |
| pins_per_reg = RV1108_SCHMITT_PINS_PER_PMU_REG; |
| } else { |
| *regmap = priv->regmap_base; |
| *reg = RV1108_SCHMITT_GRF_OFFSET; |
| pins_per_reg = RV1108_SCHMITT_PINS_PER_GRF_REG; |
| *reg += (bank->bank_num - 1) * RV1108_SCHMITT_BANK_STRIDE; |
| } |
| *reg += ((pin_num / pins_per_reg) * 4); |
| *bit = pin_num % pins_per_reg; |
| |
| return 0; |
| } |
| |
| static int rv1108_set_schmitt(struct rockchip_pin_bank *bank, |
| int pin_num, int enable) |
| { |
| struct regmap *regmap; |
| int reg; |
| u8 bit; |
| u32 data; |
| |
| rv1108_calc_schmitt_reg_and_bit(bank, pin_num, ®map, ®, &bit); |
| /* enable the write to the equivalent lower bits */ |
| data = BIT(bit + 16) | (enable << bit); |
| |
| return regmap_write(regmap, reg, data); |
| } |
| |
| static struct rockchip_pin_bank rv1108_pin_banks[] = { |
| PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", IOMUX_SOURCE_PMU, |
| IOMUX_SOURCE_PMU, |
| IOMUX_SOURCE_PMU, |
| IOMUX_SOURCE_PMU), |
| PIN_BANK_IOMUX_FLAGS(1, 32, "gpio1", 0, 0, 0, 0), |
| PIN_BANK_IOMUX_FLAGS(2, 32, "gpio2", 0, 0, 0, 0), |
| PIN_BANK_IOMUX_FLAGS(3, 32, "gpio3", 0, 0, 0, 0), |
| }; |
| |
| static struct rockchip_pin_ctrl rv1108_pin_ctrl = { |
| .pin_banks = rv1108_pin_banks, |
| .nr_banks = ARRAY_SIZE(rv1108_pin_banks), |
| .grf_mux_offset = 0x10, |
| .pmu_mux_offset = 0x0, |
| .iomux_recalced = rv1108_mux_recalced_data, |
| .niomux_recalced = ARRAY_SIZE(rv1108_mux_recalced_data), |
| .set_mux = rv1108_set_mux, |
| .set_pull = rv1108_set_pull, |
| .set_drive = rv1108_set_drive, |
| .set_schmitt = rv1108_set_schmitt, |
| }; |
| |
| static const struct udevice_id rv1108_pinctrl_ids[] = { |
| { |
| .compatible = "rockchip,rv1108-pinctrl", |
| .data = (ulong)&rv1108_pin_ctrl |
| }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(pinctrl_rv1108) = { |
| .name = "pinctrl_rv1108", |
| .id = UCLASS_PINCTRL, |
| .of_match = rv1108_pinctrl_ids, |
| .priv_auto = sizeof(struct rockchip_pinctrl_priv), |
| .ops = &rockchip_pinctrl_ops, |
| #if CONFIG_IS_ENABLED(OF_REAL) |
| .bind = dm_scan_fdt_dev, |
| #endif |
| .probe = rockchip_pinctrl_probe, |
| }; |