| /* |
| * Cache-handling routined for MIPS 4K CPUs |
| * |
| * Copyright (c) 2003 Wolfgang Denk <wd@denx.de> |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| |
| #include <config.h> |
| #include <version.h> |
| #include <asm/regdef.h> |
| #include <asm/mipsregs.h> |
| #include <asm/addrspace.h> |
| #include <asm/cacheops.h> |
| |
| |
| /* 16KB is the maximum size of instruction and data caches on |
| * MIPS 4K. |
| */ |
| #define MIPS_MAX_CACHE_SIZE 0x4000 |
| |
| |
| /* |
| * cacheop macro to automate cache operations |
| * first some helpers... |
| */ |
| #define _mincache(size, maxsize) \ |
| bltu size,maxsize,9f ; \ |
| move size,maxsize ; \ |
| 9: |
| |
| #define _align(minaddr, maxaddr, linesize) \ |
| .set noat ; \ |
| subu AT,linesize,1 ; \ |
| not AT ; \ |
| and minaddr,AT ; \ |
| addu maxaddr,-1 ; \ |
| and maxaddr,AT ; \ |
| .set at |
| |
| /* general operations */ |
| #define doop1(op1) \ |
| cache op1,0(a0) |
| #define doop2(op1, op2) \ |
| cache op1,0(a0) ; \ |
| nop ; \ |
| cache op2,0(a0) |
| |
| /* specials for cache initialisation */ |
| #define doop1lw(op1) \ |
| lw zero,0(a0) |
| #define doop1lw1(op1) \ |
| cache op1,0(a0) ; \ |
| lw zero,0(a0) ; \ |
| cache op1,0(a0) |
| #define doop121(op1,op2) \ |
| cache op1,0(a0) ; \ |
| nop; \ |
| cache op2,0(a0) ; \ |
| nop; \ |
| cache op1,0(a0) |
| |
| #define _oploopn(minaddr, maxaddr, linesize, tag, ops) \ |
| .set noreorder ; \ |
| 10: doop##tag##ops ; \ |
| bne minaddr,maxaddr,10b ; \ |
| add minaddr,linesize ; \ |
| .set reorder |
| |
| /* finally the cache operation macros */ |
| #define vcacheopn(kva, n, cacheSize, cacheLineSize, tag, ops) \ |
| blez n,11f ; \ |
| addu n,kva ; \ |
| _align(kva, n, cacheLineSize) ; \ |
| _oploopn(kva, n, cacheLineSize, tag, ops) ; \ |
| 11: |
| |
| #define icacheopn(kva, n, cacheSize, cacheLineSize, tag, ops) \ |
| _mincache(n, cacheSize); \ |
| blez n,11f ; \ |
| addu n,kva ; \ |
| _align(kva, n, cacheLineSize) ; \ |
| _oploopn(kva, n, cacheLineSize, tag, ops) ; \ |
| 11: |
| |
| #define vcacheop(kva, n, cacheSize, cacheLineSize, op) \ |
| vcacheopn(kva, n, cacheSize, cacheLineSize, 1, (op)) |
| |
| #define icacheop(kva, n, cacheSize, cacheLineSize, op) \ |
| icacheopn(kva, n, cacheSize, cacheLineSize, 1, (op)) |
| |
| /******************************************************************************* |
| * |
| * mips_cache_reset - low level initialisation of the primary caches |
| * |
| * This routine initialises the primary caches to ensure that they |
| * have good parity. It must be called by the ROM before any cached locations |
| * are used to prevent the possibility of data with bad parity being written to |
| * memory. |
| * To initialise the instruction cache it is essential that a source of data |
| * with good parity is available. This routine |
| * will initialise an area of memory starting at location zero to be used as |
| * a source of parity. |
| * |
| * RETURNS: N/A |
| * |
| */ |
| .globl mips_cache_reset |
| .ent mips_cache_reset |
| mips_cache_reset: |
| |
| li t2, CFG_ICACHE_SIZE |
| li t3, CFG_DCACHE_SIZE |
| li t4, CFG_CACHELINE_SIZE |
| move t5, t4 |
| |
| |
| li v0, MIPS_MAX_CACHE_SIZE |
| |
| /* Now clear that much memory starting from zero. |
| */ |
| |
| li a0, KSEG1 |
| addu a1, a0, v0 |
| |
| 2: sw zero, 0(a0) |
| sw zero, 4(a0) |
| sw zero, 8(a0) |
| sw zero, 12(a0) |
| sw zero, 16(a0) |
| sw zero, 20(a0) |
| sw zero, 24(a0) |
| sw zero, 28(a0) |
| addu a0, 32 |
| bltu a0, a1, 2b |
| |
| /* Set invalid tag. |
| */ |
| |
| mtc0 zero, CP0_TAGLO |
| |
| /* |
| * The caches are probably in an indeterminate state, |
| * so we force good parity into them by doing an |
| * invalidate, load/fill, invalidate for each line. |
| */ |
| |
| /* Assume bottom of RAM will generate good parity for the cache. |
| */ |
| |
| li a0, K0BASE |
| move a2, t2 # icacheSize |
| move a3, t4 # icacheLineSize |
| move a1, a2 |
| icacheopn(a0,a1,a2,a3,121,(Index_Store_Tag_I,Fill)) |
| |
| /* To support Orion/R4600, we initialise the data cache in 3 passes. |
| */ |
| |
| /* 1: initialise dcache tags. |
| */ |
| |
| li a0, K0BASE |
| move a2, t3 # dcacheSize |
| move a3, t5 # dcacheLineSize |
| move a1, a2 |
| icacheop(a0,a1,a2,a3,Index_Store_Tag_D) |
| |
| /* 2: fill dcache. |
| */ |
| |
| li a0, K0BASE |
| move a2, t3 # dcacheSize |
| move a3, t5 # dcacheLineSize |
| move a1, a2 |
| icacheopn(a0,a1,a2,a3,1lw,(dummy)) |
| |
| /* 3: clear dcache tags. |
| */ |
| |
| li a0, K0BASE |
| move a2, t3 # dcacheSize |
| move a3, t5 # dcacheLineSize |
| move a1, a2 |
| icacheop(a0,a1,a2,a3,Index_Store_Tag_D) |
| |
| j ra |
| .end mips_cache_reset |
| |
| |
| /******************************************************************************* |
| * |
| * dcache_status - get cache status |
| * |
| * RETURNS: 0 - cache disabled; 1 - cache enabled |
| * |
| */ |
| .globl dcache_status |
| .ent dcache_status |
| dcache_status: |
| |
| mfc0 v0, CP0_CONFIG |
| andi v0, v0, 1 |
| j ra |
| |
| .end dcache_status |
| |
| /******************************************************************************* |
| * |
| * dcache_disable - disable cache |
| * |
| * RETURNS: N/A |
| * |
| */ |
| .globl dcache_disable |
| .ent dcache_disable |
| dcache_disable: |
| |
| mfc0 t0, CP0_CONFIG |
| li t1, -8 |
| and t0, t0, t1 |
| ori t0, t0, CONF_CM_UNCACHED |
| mtc0 t0, CP0_CONFIG |
| j ra |
| |
| .end dcache_disable |
| |
| |
| /******************************************************************************* |
| * |
| * mips_cache_lock - lock RAM area pointed to by a0 in cache. |
| * |
| * RETURNS: N/A |
| * |
| */ |
| #if defined(CONFIG_PURPLE) |
| # define CACHE_LOCK_SIZE (CFG_DCACHE_SIZE/2) |
| #else |
| # define CACHE_LOCK_SIZE (CFG_DCACHE_SIZE) |
| #endif |
| .globl mips_cache_lock |
| .ent mips_cache_lock |
| mips_cache_lock: |
| li a1, K0BASE - CACHE_LOCK_SIZE |
| addu a0, a1 |
| li a2, CACHE_LOCK_SIZE |
| li a3, CFG_CACHELINE_SIZE |
| move a1, a2 |
| icacheop(a0,a1,a2,a3,0x1d) |
| |
| j ra |
| .end mips_cache_lock |