blob: abd4e8b7389d8c26fbf74e59e943c670fc877110 [file] [log] [blame]
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (C) 2018 Amarula Solutions.
* Author: Jagan Teki <jagan@amarulasolutions.com>
*/
#include <common.h>
#include <clk-uclass.h>
#include <dm.h>
#include <errno.h>
#include <clk/sunxi.h>
#include <dt-bindings/clock/sun4i-a10-ccu.h>
#include <dt-bindings/reset/sun4i-a10-ccu.h>
#include <linux/bitops.h>
static struct ccu_clk_gate a10_gates[] = {
[CLK_AHB_OTG] = GATE(0x060, BIT(0)),
[CLK_AHB_EHCI0] = GATE(0x060, BIT(1)),
[CLK_AHB_OHCI0] = GATE(0x060, BIT(2)),
[CLK_AHB_EHCI1] = GATE(0x060, BIT(3)),
[CLK_AHB_OHCI1] = GATE(0x060, BIT(4)),
[CLK_AHB_MMC0] = GATE(0x060, BIT(8)),
[CLK_AHB_MMC1] = GATE(0x060, BIT(9)),
[CLK_AHB_MMC2] = GATE(0x060, BIT(10)),
[CLK_AHB_MMC3] = GATE(0x060, BIT(11)),
[CLK_AHB_EMAC] = GATE(0x060, BIT(17)),
[CLK_AHB_SPI0] = GATE(0x060, BIT(20)),
[CLK_AHB_SPI1] = GATE(0x060, BIT(21)),
[CLK_AHB_SPI2] = GATE(0x060, BIT(22)),
[CLK_AHB_SPI3] = GATE(0x060, BIT(23)),
[CLK_AHB_GMAC] = GATE(0x064, BIT(17)),
[CLK_APB0_PIO] = GATE(0x068, BIT(5)),
[CLK_APB1_I2C0] = GATE(0x06c, BIT(0)),
[CLK_APB1_I2C1] = GATE(0x06c, BIT(1)),
[CLK_APB1_I2C2] = GATE(0x06c, BIT(2)),
[CLK_APB1_I2C3] = GATE(0x06c, BIT(3)),
[CLK_APB1_I2C4] = GATE(0x06c, BIT(15)),
[CLK_APB1_UART0] = GATE(0x06c, BIT(16)),
[CLK_APB1_UART1] = GATE(0x06c, BIT(17)),
[CLK_APB1_UART2] = GATE(0x06c, BIT(18)),
[CLK_APB1_UART3] = GATE(0x06c, BIT(19)),
[CLK_APB1_UART4] = GATE(0x06c, BIT(20)),
[CLK_APB1_UART5] = GATE(0x06c, BIT(21)),
[CLK_APB1_UART6] = GATE(0x06c, BIT(22)),
[CLK_APB1_UART7] = GATE(0x06c, BIT(23)),
[CLK_SPI0] = GATE(0x0a0, BIT(31)),
[CLK_SPI1] = GATE(0x0a4, BIT(31)),
[CLK_SPI2] = GATE(0x0a8, BIT(31)),
[CLK_USB_OHCI0] = GATE(0x0cc, BIT(6)),
[CLK_USB_OHCI1] = GATE(0x0cc, BIT(7)),
[CLK_USB_PHY] = GATE(0x0cc, BIT(8)),
[CLK_SPI3] = GATE(0x0d4, BIT(31)),
};
static struct ccu_reset a10_resets[] = {
[RST_USB_PHY0] = RESET(0x0cc, BIT(0)),
[RST_USB_PHY1] = RESET(0x0cc, BIT(1)),
[RST_USB_PHY2] = RESET(0x0cc, BIT(2)),
};
const struct ccu_desc a10_ccu_desc = {
.gates = a10_gates,
.resets = a10_resets,
.num_gates = ARRAY_SIZE(a10_gates),
.num_resets = ARRAY_SIZE(a10_resets),
};