board/ns9750dev/platform.S - platform/external/u-boot - Gitiles

 /*
  * Board specific setup info
  *
  * (C) Copyright 2003
  * Texas Instruments, <www.ti.com>
  * Kshitij Gupta <Kshitij@ti.com>
  *
  * Modified for the NS9750 DevBoard by
  * (C) Copyright 2004 by FS Forth-Systeme GmbH.
  * Markus Pietrek <mpietrek@fsforth.de>
  * @References: [1] NS9750 Hardware Reference/December 2003
  *	        [2] ns9750_a.cmd from MAJIC configuration
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */

 #include <config.h>
 #include <version.h>

 #if defined(CONFIG_NS9750DEV)
 # ifdef CONFIG_INIT_CRITICAL
 #  include <./ns9750_sys.h>
 #  include <./ns9750_mem.h>
 # endif
 #endif

 /***********************************************************************
  * @Function: write_register_block
  * @Return: nothing
  * @Descr: Copies the register block of register_offset:register value to
  *         the registers at base r0. The block is assumed to start in RAM at r1
  *         and end at r2. The linked RAM base address of U-Boot is assumed to be
  *	   in r5 while the ROM base address we are running from is r6
  *         Uses r3 and r4 as tempory registers
  ***********************************************************************/

 .macro	write_register_block
 	@@ map the addresses to high memory
 	sub	r1, r1, r5
 	add	r1, r1, r6
 	sub	r2, r2, r5
 	add	r2, r2, r6

 	@@ copy all
 1:
 	@@ Write register/value pair starting at [r1] to register base r0
 	ldr	r3, [r1], #4
 	ldr	r4, [r1], #4
 	str	r4, [r0,r3]
 	cmp	r1, r2
 	blt	1b
 .endm

 _TEXT_BASE:
 	.word	TEXT_BASE	@ sdram load addr from config.mk
 _PHYS_FLASH:
 	.word	PHYS_FLASH_1    @ real flash address (without mirroring)
 _CAS_LATENCY:
 	.word	0x00022000	@ for CAS2 latency

 #ifdef CONFIG_INIT_CRITICAL
 .globl platformsetup
 platformsetup:

 	/* U-Boot may be linked to RAM at 0x780000. But this code will run in
 	   flash from 0x0. But in order to enable RAM we have to disable the
 	   mirror bit, therefore we have to jump to our real flash address
 	   beginning at PHYS_FLASH_1 (CS4 Base). Therefore,
 	   _run_at_real_flash_address may be 0x500003b0 while be linked to
 	   0x7803b0. So we must modify our linked addresses */

 	@@ branch to high memory address, away from 0x0
 	ldr	r5, _TEXT_BASE
 	ldr	r6, _PHYS_FLASH
 	ldr	r0, =_run_at_real_flash_address
 	sub	r0, r0, r5
 	add	r0, r0, r6
 	mov	pc, r0
 	nop			@ for pipelining

 _run_at_real_flash_address:
 	@@ now we are running > PHYS_FLASH_1, safe to enable memory controller

 	@@ Write Memory Configuration Registers

 	ldr	r0, _NS9750_MEM_MODULE_BASE
 	ldr	r1, =_MEM_CONFIG_START
 	ldr	r2, =_MEM_CONFIG_END

 	write_register_block

 	@@ Give SDRAM some time to settle
 	@@ @TODO. According to [2] it should be 2 AHB cycles. Check

 	ldr	r1, =0x50
 _sdram_settle:
 	subs	r1, r1, #1
 	bne	_sdram_settle

 _enable_mappings:
 	@@ Enable SDRAM Mode

 	ldr	r1, =_MEM_MODE_START
 	ldr	r2, =_MEM_MODE_END

 	write_register_block

 	ldr	r3, _CAS_LATENCY @ perform one read from SDRAM
 	ldr	r3, [r3]

 	@@ Enable SDRAM and memory mappings

 	ldr	r1, =_MEM_ENABLE_START
 	ldr	r2, =_MEM_ENABLE_END

 	write_register_block

 	@@ Activate AHB monitor

 	ldr	r0, =NS9750_SYS_MODULE_BASE
 	ldr	r1, =_AHB_MONITOR_START
 	ldr	r2, =_AHB_MONITOR_END

 	write_register_block
 _relocate_lr:
 	/* lr and ip (from cpu_init_crit) are still based on 0x0, relocate it to
 	   PHYS_FLASH. */
 	mov	r1, ip
 	add	r1, r1, r6
 	mov	ip, r1

 	mov	r1, lr
 	add	r1, r1, r6
 	mov	lr, r1

 	@@ back to arch calling code
 	mov	pc,	lr

 	.ltorg

 _NS9750_MEM_MODULE_BASE:
 	.word	NS9750_MEM_MODULE_BASE

 _MEM_CONFIG_START:
 	/* Table of 2 32bit entries. First word is register address offset
 	   relative to NS9750_MEM_MODULE_BASE, second one is value. They are
 	   written in order of appearance */

 	@@ Register values taken from [2]
 	.word	NS9750_MEM_CTRL
 	.word	NS9750_MEM_CTRL_E

 	.word	NS9750_MEM_DYN_REFRESH
 	.word	(0x6 & NS9750_MEM_DYN_REFRESH_MA)

 	.word	NS9750_MEM_DYN_READ_CFG
 	.word	(0x1 & NS9750_MEM_DYN_READ_CFG_MA)

 	.word	NS9750_MEM_DYN_TRP
 	.word	(0x1 & NS9750_MEM_DYN_TRP_MA)

 	.word	NS9750_MEM_DYN_TRAS
 	.word	(0x4 & NS9750_MEM_DYN_TRAS_MA)

 	.word	NS9750_MEM_DYN_TAPR
 	.word	(0x1 & NS9750_MEM_DYN_TRAS_MA)

 	.word	NS9750_MEM_DYN_TDAL
 	.word	(0x5 & NS9750_MEM_DYN_TDAL_MA)

 	.word	NS9750_MEM_DYN_TWR
 	.word	(0x1 & NS9750_MEM_DYN_TWR_MA)

 	.word	NS9750_MEM_DYN_TRC
 	.word	(0x6 & NS9750_MEM_DYN_TRC_MA)

 	.word	NS9750_MEM_DYN_TRFC
 	.word	(0x6 & NS9750_MEM_DYN_TRFC_MA)

 	.word	NS9750_MEM_DYN_TRRD
 	.word	(0x1 & NS9750_MEM_DYN_TRRD_MA)

 	.word	NS9750_MEM_DYN_TMRD
 	.word	(0x1 & NS9750_MEM_DYN_TMRD_MA)

 	@@ CS 4
 	.word	NS9750_MEM_DYN_CFG(0)
 	.word	(NS9750_MEM_DYN_CFG_AM | \
 		 (0x280 & NS9750_MEM_DYN_CFG_AM_MA))

 	.word	NS9750_MEM_DYN_RAS_CAS(0)
 	.word	((0x200 & NS9750_MEM_DYN_RAS_CAS_CAS_MA) | \
 		 (0x03 & NS9750_MEM_DYN_RAS_CAS_RAS_MA))

 	@@ CS 5
 	.word	NS9750_MEM_DYN_CFG(1)
 	.word	(NS9750_MEM_DYN_CFG_AM | \
 		 (0x280 & NS9750_MEM_DYN_CFG_AM_MA))

 	.word	NS9750_MEM_DYN_RAS_CAS(1)
 	.word	((0x200 & NS9750_MEM_DYN_RAS_CAS_CAS_MA) | \
 		 (0x03 & NS9750_MEM_DYN_RAS_CAS_RAS_MA))

 	@@ CS 6
 	.word	NS9750_MEM_DYN_CFG(2)
 	.word	(NS9750_MEM_DYN_CFG_AM | \
 		 (0x280 & NS9750_MEM_DYN_CFG_AM_MA))

 	.word	NS9750_MEM_DYN_RAS_CAS(2)
 	.word	((0x200 & NS9750_MEM_DYN_RAS_CAS_CAS_MA) | \
 		 (0x03 & NS9750_MEM_DYN_RAS_CAS_RAS_MA))

 	@@ CS 7
 	.word	NS9750_MEM_DYN_CFG(3)
 	.word	(NS9750_MEM_DYN_CFG_AM | \
 		 (0x280 & NS9750_MEM_DYN_CFG_AM_MA))

 	.word	NS9750_MEM_DYN_RAS_CAS(3)
 	.word	((0x200 & NS9750_MEM_DYN_RAS_CAS_CAS_MA) | \
 		 (0x03 & NS9750_MEM_DYN_RAS_CAS_RAS_MA))

 	.word	NS9750_MEM_DYN_CTRL
 	.word	(NS9750_MEM_DYN_CTRL_I_PALL | \
 		 NS9750_MEM_DYN_CTRL_SR | \
 		 NS9750_MEM_DYN_CTRL_CE )

 	.word	NS9750_MEM_DYN_REFRESH
 	.word	(0x1 & NS9750_MEM_DYN_REFRESH_MA)
 	@@ No further register settings after refresh
 _MEM_CONFIG_END:

 _MEM_MODE_START:
 	.word	NS9750_MEM_DYN_REFRESH
 	.word	(0x30 & NS9750_MEM_DYN_REFRESH_MA)

 	.word	NS9750_MEM_DYN_CTRL
 	.word	(NS9750_MEM_DYN_CTRL_I_MODE | \
 		 NS9750_MEM_DYN_CTRL_SR | \
 		 NS9750_MEM_DYN_CTRL_CE )
 _MEM_MODE_END:

 _MEM_ENABLE_START:
 	.word	NS9750_MEM_DYN_CTRL
 	.word	(NS9750_MEM_DYN_CTRL_I_NORMAL | \
 		 NS9750_MEM_DYN_CTRL_SR | \
 		 NS9750_MEM_DYN_CTRL_CE )

 	@@ CS 4
 	.word	NS9750_MEM_DYN_CFG(0)
 	.word	(NS9750_MEM_DYN_CFG_BDMC | \
 		 NS9750_MEM_DYN_CFG_AM | \
 		 (0x280 & NS9750_MEM_DYN_CFG_AM_MA))

 	@@ CS 5
 	.word	NS9750_MEM_DYN_CFG(1)
 	.word	(NS9750_MEM_DYN_CFG_BDMC | \
 		 NS9750_MEM_DYN_CFG_AM | \
 		 (0x280 & NS9750_MEM_DYN_CFG_AM_MA))

 	@@ CS 6
 	.word	NS9750_MEM_DYN_CFG(2)
 	.word	(NS9750_MEM_DYN_CFG_BDMC | \
 		 NS9750_MEM_DYN_CFG_AM | \
 		 (0x280 & NS9750_MEM_DYN_CFG_AM_MA))

 	@@ CS 7
 	.word	NS9750_MEM_DYN_CFG(3)
 	.word	(NS9750_MEM_DYN_CFG_BDMC | \
 		 NS9750_MEM_DYN_CFG_AM | \
 		 (0x280 & NS9750_MEM_DYN_CFG_AM_MA))
 _MEM_ENABLE_END:

 _AHB_MONITOR_START:
 	.word	NS9750_SYS_AHB_TIMEOUT
 	.word	0x01000100	@ @TODO not calculated yet

 	.word	NS9750_SYS_AHB_MON
 	.word	(NS9750_SYS_AHB_MON_BMTC_GEN_IRQ | \
 		 NS9750_SYS_AHB_MON_BATC_GEN_IRQ)
 _AHB_MONITOR_END:

 #endif /* CONFIG_INIT_CRITICAL */
	/*
	* Board specific setup info
	*
	* (C) Copyright 2003
	* Texas Instruments, <www.ti.com>
	* Kshitij Gupta <Kshitij@ti.com>
	*
	* Modified for the NS9750 DevBoard by
	* (C) Copyright 2004 by FS Forth-Systeme GmbH.
	* Markus Pietrek <mpietrek@fsforth.de>
	* @References: [1] NS9750 Hardware Reference/December 2003
	* [2] ns9750_a.cmd from MAJIC configuration
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/

	#include <config.h>
	#include <version.h>

	#if defined(CONFIG_NS9750DEV)
	# ifdef CONFIG_INIT_CRITICAL
	# include <./ns9750_sys.h>
	# include <./ns9750_mem.h>
	# endif
	#endif

	/***********************************************************************
	* @Function: write_register_block
	* @Return: nothing
	* @Descr: Copies the register block of register_offset:register value to
	* the registers at base r0. The block is assumed to start in RAM at r1
	* and end at r2. The linked RAM base address of U-Boot is assumed to be
	* in r5 while the ROM base address we are running from is r6
	* Uses r3 and r4 as tempory registers
	***********************************************************************/

	.macro write_register_block
	@@ map the addresses to high memory
	sub r1, r1, r5
	add r1, r1, r6
	sub r2, r2, r5
	add r2, r2, r6

	@@ copy all
	1:
	@@ Write register/value pair starting at [r1] to register base r0
	ldr r3, [r1], #4
	ldr r4, [r1], #4
	str r4, [r0,r3]
	cmp r1, r2
	blt 1b
	.endm

	_TEXT_BASE:
	.word TEXT_BASE @ sdram load addr from config.mk
	_PHYS_FLASH:
	.word PHYS_FLASH_1 @ real flash address (without mirroring)
	_CAS_LATENCY:
	.word 0x00022000 @ for CAS2 latency

	#ifdef CONFIG_INIT_CRITICAL
	.globl platformsetup
	platformsetup:

	/* U-Boot may be linked to RAM at 0x780000. But this code will run in
	flash from 0x0. But in order to enable RAM we have to disable the
	mirror bit, therefore we have to jump to our real flash address
	beginning at PHYS_FLASH_1 (CS4 Base). Therefore,
	_run_at_real_flash_address may be 0x500003b0 while be linked to
	0x7803b0. So we must modify our linked addresses */

	@@ branch to high memory address, away from 0x0
	ldr r5, _TEXT_BASE
	ldr r6, _PHYS_FLASH
	ldr r0, =_run_at_real_flash_address
	sub r0, r0, r5
	add r0, r0, r6
	mov pc, r0
	nop @ for pipelining

	_run_at_real_flash_address:
	@@ now we are running > PHYS_FLASH_1, safe to enable memory controller

	@@ Write Memory Configuration Registers

	ldr r0, _NS9750_MEM_MODULE_BASE
	ldr r1, =_MEM_CONFIG_START
	ldr r2, =_MEM_CONFIG_END

	write_register_block

	@@ Give SDRAM some time to settle
	@@ @TODO. According to [2] it should be 2 AHB cycles. Check

	ldr r1, =0x50
	_sdram_settle:
	subs r1, r1, #1
	bne _sdram_settle

	_enable_mappings:
	@@ Enable SDRAM Mode

	ldr r1, =_MEM_MODE_START
	ldr r2, =_MEM_MODE_END

	write_register_block

	ldr r3, _CAS_LATENCY @ perform one read from SDRAM
	ldr r3, [r3]

	@@ Enable SDRAM and memory mappings

	ldr r1, =_MEM_ENABLE_START
	ldr r2, =_MEM_ENABLE_END

	write_register_block

	@@ Activate AHB monitor

	ldr r0, =NS9750_SYS_MODULE_BASE
	ldr r1, =_AHB_MONITOR_START
	ldr r2, =_AHB_MONITOR_END

	write_register_block
	_relocate_lr:
	/* lr and ip (from cpu_init_crit) are still based on 0x0, relocate it to
	PHYS_FLASH. */
	mov r1, ip
	add r1, r1, r6
	mov ip, r1

	mov r1, lr
	add r1, r1, r6
	mov lr, r1

	@@ back to arch calling code
	mov pc, lr

	.ltorg

	_NS9750_MEM_MODULE_BASE:
	.word NS9750_MEM_MODULE_BASE

	_MEM_CONFIG_START:
	/* Table of 2 32bit entries. First word is register address offset
	relative to NS9750_MEM_MODULE_BASE, second one is value. They are
	written in order of appearance */

	@@ Register values taken from [2]
	.word NS9750_MEM_CTRL
	.word NS9750_MEM_CTRL_E

	.word NS9750_MEM_DYN_REFRESH
	.word (0x6 & NS9750_MEM_DYN_REFRESH_MA)

	.word NS9750_MEM_DYN_READ_CFG
	.word (0x1 & NS9750_MEM_DYN_READ_CFG_MA)

	.word NS9750_MEM_DYN_TRP
	.word (0x1 & NS9750_MEM_DYN_TRP_MA)

	.word NS9750_MEM_DYN_TRAS
	.word (0x4 & NS9750_MEM_DYN_TRAS_MA)

	.word NS9750_MEM_DYN_TAPR
	.word (0x1 & NS9750_MEM_DYN_TRAS_MA)

	.word NS9750_MEM_DYN_TDAL
	.word (0x5 & NS9750_MEM_DYN_TDAL_MA)

	.word NS9750_MEM_DYN_TWR
	.word (0x1 & NS9750_MEM_DYN_TWR_MA)

	.word NS9750_MEM_DYN_TRC
	.word (0x6 & NS9750_MEM_DYN_TRC_MA)

	.word NS9750_MEM_DYN_TRFC
	.word (0x6 & NS9750_MEM_DYN_TRFC_MA)

	.word NS9750_MEM_DYN_TRRD
	.word (0x1 & NS9750_MEM_DYN_TRRD_MA)

	.word NS9750_MEM_DYN_TMRD
	.word (0x1 & NS9750_MEM_DYN_TMRD_MA)

	@@ CS 4
	.word NS9750_MEM_DYN_CFG(0)
	.word (NS9750_MEM_DYN_CFG_AM \| \
	(0x280 & NS9750_MEM_DYN_CFG_AM_MA))

	.word NS9750_MEM_DYN_RAS_CAS(0)
	.word ((0x200 & NS9750_MEM_DYN_RAS_CAS_CAS_MA) \| \
	(0x03 & NS9750_MEM_DYN_RAS_CAS_RAS_MA))

	@@ CS 5
	.word NS9750_MEM_DYN_CFG(1)
	.word (NS9750_MEM_DYN_CFG_AM \| \
	(0x280 & NS9750_MEM_DYN_CFG_AM_MA))

	.word NS9750_MEM_DYN_RAS_CAS(1)
	.word ((0x200 & NS9750_MEM_DYN_RAS_CAS_CAS_MA) \| \
	(0x03 & NS9750_MEM_DYN_RAS_CAS_RAS_MA))

	@@ CS 6
	.word NS9750_MEM_DYN_CFG(2)
	.word (NS9750_MEM_DYN_CFG_AM \| \
	(0x280 & NS9750_MEM_DYN_CFG_AM_MA))

	.word NS9750_MEM_DYN_RAS_CAS(2)
	.word ((0x200 & NS9750_MEM_DYN_RAS_CAS_CAS_MA) \| \
	(0x03 & NS9750_MEM_DYN_RAS_CAS_RAS_MA))

	@@ CS 7
	.word NS9750_MEM_DYN_CFG(3)
	.word (NS9750_MEM_DYN_CFG_AM \| \
	(0x280 & NS9750_MEM_DYN_CFG_AM_MA))

	.word NS9750_MEM_DYN_RAS_CAS(3)
	.word ((0x200 & NS9750_MEM_DYN_RAS_CAS_CAS_MA) \| \
	(0x03 & NS9750_MEM_DYN_RAS_CAS_RAS_MA))

	.word NS9750_MEM_DYN_CTRL
	.word (NS9750_MEM_DYN_CTRL_I_PALL \| \
	NS9750_MEM_DYN_CTRL_SR \| \
	NS9750_MEM_DYN_CTRL_CE )

	.word NS9750_MEM_DYN_REFRESH
	.word (0x1 & NS9750_MEM_DYN_REFRESH_MA)
	@@ No further register settings after refresh
	_MEM_CONFIG_END:

	_MEM_MODE_START:
	.word NS9750_MEM_DYN_REFRESH
	.word (0x30 & NS9750_MEM_DYN_REFRESH_MA)

	.word NS9750_MEM_DYN_CTRL
	.word (NS9750_MEM_DYN_CTRL_I_MODE \| \
	NS9750_MEM_DYN_CTRL_SR \| \
	NS9750_MEM_DYN_CTRL_CE )
	_MEM_MODE_END:

	_MEM_ENABLE_START:
	.word NS9750_MEM_DYN_CTRL
	.word (NS9750_MEM_DYN_CTRL_I_NORMAL \| \
	NS9750_MEM_DYN_CTRL_SR \| \
	NS9750_MEM_DYN_CTRL_CE )

	@@ CS 4
	.word NS9750_MEM_DYN_CFG(0)
	.word (NS9750_MEM_DYN_CFG_BDMC \| \
	NS9750_MEM_DYN_CFG_AM \| \
	(0x280 & NS9750_MEM_DYN_CFG_AM_MA))

	@@ CS 5
	.word NS9750_MEM_DYN_CFG(1)
	.word (NS9750_MEM_DYN_CFG_BDMC \| \
	NS9750_MEM_DYN_CFG_AM \| \
	(0x280 & NS9750_MEM_DYN_CFG_AM_MA))

	@@ CS 6
	.word NS9750_MEM_DYN_CFG(2)
	.word (NS9750_MEM_DYN_CFG_BDMC \| \
	NS9750_MEM_DYN_CFG_AM \| \
	(0x280 & NS9750_MEM_DYN_CFG_AM_MA))

	@@ CS 7
	.word NS9750_MEM_DYN_CFG(3)
	.word (NS9750_MEM_DYN_CFG_BDMC \| \
	NS9750_MEM_DYN_CFG_AM \| \
	(0x280 & NS9750_MEM_DYN_CFG_AM_MA))
	_MEM_ENABLE_END:

	_AHB_MONITOR_START:
	.word NS9750_SYS_AHB_TIMEOUT
	.word 0x01000100 @ @TODO not calculated yet

	.word NS9750_SYS_AHB_MON
	.word (NS9750_SYS_AHB_MON_BMTC_GEN_IRQ \| \
	NS9750_SYS_AHB_MON_BATC_GEN_IRQ)
	_AHB_MONITOR_END:

	#endif /* CONFIG_INIT_CRITICAL */