| /* |
| * ZynqMP clock driver |
| * |
| * Copyright (C) 2016 Xilinx, Inc. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <linux/bitops.h> |
| #include <clk-uclass.h> |
| #include <clk.h> |
| #include <dm.h> |
| |
| #define ZYNQMP_GEM0_REF_CTRL 0xFF5E0050 |
| #define ZYNQMP_IOPLL_CTRL 0xFF5E0020 |
| #define ZYNQMP_RPLL_CTRL 0xFF5E0030 |
| #define ZYNQMP_DPLL_CTRL 0xFD1A002C |
| #define ZYNQMP_SIP_SVC_MMIO_WRITE 0xC2000013 |
| #define ZYNQMP_SIP_SVC_MMIO_WRITE 0xC2000013 |
| #define ZYNQMP_SIP_SVC_MMIO_WRITE 0xC2000013 |
| #define ZYNQMP_SIP_SVC_MMIO_READ 0xC2000014 |
| #define ZYNQMP_DIV_MAX_VAL 0x3F |
| #define ZYNQMP_DIV1_SHFT 8 |
| #define ZYNQMP_DIV1_SHFT 8 |
| #define ZYNQMP_DIV2_SHFT 16 |
| #define ZYNQMP_DIV_MASK 0x3F |
| #define ZYNQMP_PLL_CTRL_FBDIV_MASK 0x7F |
| #define ZYNQMP_PLL_CTRL_FBDIV_SHFT 8 |
| #define ZYNQMP_GEM_REF_CTRL_SRC_MASK 0x7 |
| #define ZYNQMP_GEM0_CLK_ID 45 |
| #define ZYNQMP_GEM1_CLK_ID 46 |
| #define ZYNQMP_GEM2_CLK_ID 47 |
| #define ZYNQMP_GEM3_CLK_ID 48 |
| |
| static unsigned long pss_ref_clk; |
| |
| static int zynqmp_calculate_divisors(unsigned long req_rate, |
| unsigned long parent_rate, |
| u32 *div1, u32 *div2) |
| { |
| u32 req_div = 1; |
| u32 i; |
| |
| /* |
| * calculate two divisors to get |
| * required rate and each divisor |
| * should be less than 63 |
| */ |
| req_div = DIV_ROUND_UP(parent_rate, req_rate); |
| |
| for (i = 1; i <= req_div; i++) { |
| if ((req_div % i) == 0) { |
| *div1 = req_div / i; |
| *div2 = i; |
| if ((*div1 < ZYNQMP_DIV_MAX_VAL) && |
| (*div2 < ZYNQMP_DIV_MAX_VAL)) |
| return 0; |
| } |
| } |
| |
| return -1; |
| } |
| |
| static int zynqmp_get_periph_id(unsigned long id) |
| { |
| int periph_id; |
| |
| switch (id) { |
| case ZYNQMP_GEM0_CLK_ID: |
| periph_id = 0; |
| break; |
| case ZYNQMP_GEM1_CLK_ID: |
| periph_id = 1; |
| break; |
| case ZYNQMP_GEM2_CLK_ID: |
| periph_id = 2; |
| break; |
| case ZYNQMP_GEM3_CLK_ID: |
| periph_id = 3; |
| break; |
| default: |
| printf("%s, Invalid clock id:%ld\n", __func__, id); |
| return -EINVAL; |
| } |
| |
| return periph_id; |
| } |
| |
| static int zynqmp_set_clk(unsigned long id, u32 div1, u32 div2) |
| { |
| struct pt_regs regs; |
| ulong reg; |
| u32 mask, value; |
| |
| id = zynqmp_get_periph_id(id); |
| if (id < 0) |
| return -EINVAL; |
| |
| reg = (ulong)((u32 *)ZYNQMP_GEM0_REF_CTRL + id); |
| mask = (ZYNQMP_DIV_MASK << ZYNQMP_DIV1_SHFT) | |
| (ZYNQMP_DIV_MASK << ZYNQMP_DIV2_SHFT); |
| value = (div1 << ZYNQMP_DIV1_SHFT) | (div2 << ZYNQMP_DIV2_SHFT); |
| |
| debug("%s: reg:0x%lx, mask:0x%x, value:0x%x\n", __func__, reg, mask, |
| value); |
| |
| regs.regs[0] = ZYNQMP_SIP_SVC_MMIO_WRITE; |
| regs.regs[1] = ((u64)mask << 32) | reg; |
| regs.regs[2] = value; |
| regs.regs[3] = 0; |
| |
| smc_call(®s); |
| |
| return regs.regs[0]; |
| } |
| |
| static unsigned long zynqmp_clk_get_rate(struct clk *clk) |
| { |
| struct pt_regs regs; |
| ulong reg; |
| unsigned long value; |
| int id; |
| |
| id = zynqmp_get_periph_id(clk->id); |
| if (id < 0) |
| return -EINVAL; |
| |
| reg = (ulong)((u32 *)ZYNQMP_GEM0_REF_CTRL + id); |
| |
| regs.regs[0] = ZYNQMP_SIP_SVC_MMIO_READ; |
| regs.regs[1] = reg; |
| regs.regs[2] = 0; |
| regs.regs[3] = 0; |
| |
| smc_call(®s); |
| |
| value = upper_32_bits(regs.regs[0]); |
| |
| value &= ZYNQMP_GEM_REF_CTRL_SRC_MASK; |
| |
| switch (value) { |
| case 0: |
| regs.regs[1] = ZYNQMP_IOPLL_CTRL; |
| break; |
| case 2: |
| regs.regs[1] = ZYNQMP_RPLL_CTRL; |
| break; |
| case 3: |
| regs.regs[1] = ZYNQMP_DPLL_CTRL; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| regs.regs[0] = ZYNQMP_SIP_SVC_MMIO_READ; |
| regs.regs[2] = 0; |
| regs.regs[3] = 0; |
| |
| smc_call(®s); |
| |
| value = upper_32_bits(regs.regs[0]) & |
| (ZYNQMP_PLL_CTRL_FBDIV_MASK << |
| ZYNQMP_PLL_CTRL_FBDIV_SHFT); |
| value >>= ZYNQMP_PLL_CTRL_FBDIV_SHFT; |
| value *= pss_ref_clk; |
| |
| return value; |
| } |
| |
| static ulong zynqmp_clk_set_rate(struct clk *clk, unsigned long clk_rate) |
| { |
| int ret; |
| u32 div1 = 0; |
| u32 div2 = 0; |
| unsigned long input_clk; |
| |
| input_clk = zynqmp_clk_get_rate(clk); |
| if (IS_ERR_VALUE(input_clk)) { |
| dev_err(dev, "failed to get input_clk\n"); |
| return -EINVAL; |
| } |
| |
| debug("%s: i/p CLK %ld, clk_rate:0x%ld\n", __func__, input_clk, |
| clk_rate); |
| |
| ret = zynqmp_calculate_divisors(clk_rate, input_clk, &div1, &div2); |
| if (ret) { |
| dev_err(dev, "failed to proper divisors\n"); |
| return -EINVAL; |
| } |
| |
| debug("%s: Div1:%d, Div2:%d\n", __func__, div1, div2); |
| |
| ret = zynqmp_set_clk(clk->id, div1, div2); |
| if (ret) { |
| dev_err(dev, "failed to set gem clk\n"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int zynqmp_clk_probe(struct udevice *dev) |
| { |
| struct clk clk; |
| int ret; |
| |
| debug("%s\n", __func__); |
| ret = clk_get_by_name(dev, "pss_ref_clk", &clk); |
| if (ret < 0) { |
| dev_err(dev, "failed to get pss_ref_clk\n"); |
| return ret; |
| } |
| |
| pss_ref_clk = clk_get_rate(&clk); |
| if (IS_ERR_VALUE(pss_ref_clk)) { |
| dev_err(dev, "failed to get rate pss_ref_clk\n"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static struct clk_ops zynqmp_clk_ops = { |
| .set_rate = zynqmp_clk_set_rate, |
| .get_rate = zynqmp_clk_get_rate, |
| }; |
| |
| static const struct udevice_id zynqmp_clk_ids[] = { |
| { .compatible = "xlnx,zynqmp-clkc" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(zynqmp_clk) = { |
| .name = "zynqmp-clk", |
| .id = UCLASS_CLK, |
| .of_match = zynqmp_clk_ids, |
| .probe = zynqmp_clk_probe, |
| .ops = &zynqmp_clk_ops, |
| }; |