| /* |
| * (C) Copyright 2003 Josef Baumgartner <josef.baumgartner@telex.de> |
| * |
| * (C) Copyright 2000 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| |
| #include <asm/timer.h> |
| #include <asm/immap.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| static ulong timestamp; |
| |
| #if defined(CONFIG_MCFTMR) |
| #ifndef CFG_UDELAY_BASE |
| # error "uDelay base not defined!" |
| #endif |
| |
| #if !defined(CFG_TMR_BASE) || !defined(CFG_INTR_BASE) || !defined(CFG_TMRINTR_NO) || !defined(CFG_TMRINTR_MASK) |
| # error "TMR_BASE, INTR_BASE, TMRINTR_NO or TMRINTR_MASk not defined!" |
| #endif |
| extern void dtimer_intr_setup(void); |
| |
| void udelay(unsigned long usec) |
| { |
| volatile dtmr_t *timerp = (dtmr_t *) (CFG_UDELAY_BASE); |
| uint start, now, tmp; |
| |
| while (usec > 0) { |
| if (usec > 65000) |
| tmp = 65000; |
| else |
| tmp = usec; |
| usec = usec - tmp; |
| |
| /* Set up TIMER 3 as timebase clock */ |
| timerp->tmr = DTIM_DTMR_RST_RST; |
| timerp->tcn = 0; |
| /* set period to 1 us */ |
| timerp->tmr = |
| CFG_TIMER_PRESCALER | DTIM_DTMR_CLK_DIV1 | DTIM_DTMR_FRR | |
| DTIM_DTMR_RST_EN; |
| |
| start = now = timerp->tcn; |
| while (now < start + tmp) |
| now = timerp->tcn; |
| } |
| } |
| |
| void dtimer_interrupt(void *not_used) |
| { |
| volatile dtmr_t *timerp = (dtmr_t *) (CFG_TMR_BASE); |
| |
| /* check for timer interrupt asserted */ |
| if ((CFG_TMRPND_REG & CFG_TMRINTR_MASK) == CFG_TMRINTR_PEND) { |
| timerp->ter = (DTIM_DTER_CAP | DTIM_DTER_REF); |
| timestamp++; |
| return; |
| } |
| } |
| |
| void timer_init(void) |
| { |
| volatile dtmr_t *timerp = (dtmr_t *) (CFG_TMR_BASE); |
| |
| timestamp = 0; |
| |
| timerp->tcn = 0; |
| timerp->trr = 0; |
| |
| /* Set up TIMER 4 as clock */ |
| timerp->tmr = DTIM_DTMR_RST_RST; |
| |
| /* initialize and enable timer interrupt */ |
| irq_install_handler(CFG_TMRINTR_NO, dtimer_interrupt, 0); |
| |
| timerp->tcn = 0; |
| timerp->trr = 1000; /* Interrupt every ms */ |
| |
| dtimer_intr_setup(); |
| |
| /* set a period of 1us, set timer mode to restart and enable timer and interrupt */ |
| timerp->tmr = CFG_TIMER_PRESCALER | DTIM_DTMR_CLK_DIV1 | |
| DTIM_DTMR_FRR | DTIM_DTMR_ORRI | DTIM_DTMR_RST_EN; |
| } |
| |
| void reset_timer(void) |
| { |
| timestamp = 0; |
| } |
| |
| ulong get_timer(ulong base) |
| { |
| return (timestamp - base); |
| } |
| |
| void set_timer(ulong t) |
| { |
| timestamp = t; |
| } |
| #endif /* CONFIG_MCFTMR */ |
| |
| #if defined(CONFIG_MCFPIT) |
| #if !defined(CFG_PIT_BASE) |
| # error "CFG_PIT_BASE not defined!" |
| #endif |
| |
| static unsigned short lastinc; |
| |
| void udelay(unsigned long usec) |
| { |
| volatile pit_t *timerp = (pit_t *) (CFG_UDELAY_BASE); |
| uint tmp; |
| |
| while (usec > 0) { |
| if (usec > 65000) |
| tmp = 65000; |
| else |
| tmp = usec; |
| usec = usec - tmp; |
| |
| /* Set up TIMER 3 as timebase clock */ |
| timerp->pcsr = PIT_PCSR_OVW; |
| timerp->pmr = 0; |
| /* set period to 1 us */ |
| timerp->pcsr |= PIT_PCSR_PRE(CFG_PIT_PRESCALE) | PIT_PCSR_EN; |
| |
| timerp->pmr = tmp; |
| while (timerp->pcntr > 0) ; |
| } |
| } |
| |
| void timer_init(void) |
| { |
| volatile pit_t *timerp = (pit_t *) (CFG_PIT_BASE); |
| timestamp = 0; |
| |
| /* Set up TIMER 4 as poll clock */ |
| timerp->pcsr = PIT_PCSR_OVW; |
| timerp->pmr = lastinc = 0; |
| timerp->pcsr |= PIT_PCSR_PRE(CFG_PIT_PRESCALE) | PIT_PCSR_EN; |
| } |
| |
| void set_timer(ulong t) |
| { |
| volatile pit_t *timerp = (pit_t *) (CFG_PIT_BASE); |
| |
| timestamp = 0; |
| timerp->pmr = lastinc = 0; |
| } |
| |
| ulong get_timer(ulong base) |
| { |
| unsigned short now, diff; |
| volatile pit_t *timerp = (pit_t *) (CFG_PIT_BASE); |
| |
| now = timerp->pcntr; |
| diff = -(now - lastinc); |
| |
| timestamp += diff; |
| lastinc = now; |
| return timestamp - base; |
| } |
| |
| void wait_ticks(unsigned long ticks) |
| { |
| set_timer(0); |
| while (get_timer(0) < ticks) ; |
| } |
| #endif /* CONFIG_MCFPIT */ |
| |
| /* |
| * This function is derived from PowerPC code (read timebase as long long). |
| * On M68K it just returns the timer value. |
| */ |
| unsigned long long get_ticks(void) |
| { |
| return get_timer(0); |
| } |
| |
| /* |
| * This function is derived from PowerPC code (timebase clock frequency). |
| * On M68K it returns the number of timer ticks per second. |
| */ |
| ulong get_tbclk(void) |
| { |
| ulong tbclk; |
| tbclk = CFG_HZ; |
| return tbclk; |
| } |