| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2017 Álvaro Fernández Rojas <noltari@gmail.com> |
| */ |
| |
| #include <dt-bindings/clock/bcm6328-clock.h> |
| #include <dt-bindings/dma/bcm6328-dma.h> |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/power-domain/bcm6328-power-domain.h> |
| #include <dt-bindings/reset/bcm6328-reset.h> |
| #include "skeleton.dtsi" |
| |
| / { |
| compatible = "brcm,bcm6328"; |
| |
| aliases { |
| spi0 = &spi; |
| }; |
| |
| cpus { |
| reg = <0x10000000 0x4>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| bootph-all; |
| |
| cpu@0 { |
| compatible = "brcm,bcm6328-cpu", "mips,mips4Kc"; |
| device_type = "cpu"; |
| reg = <0>; |
| bootph-all; |
| }; |
| |
| cpu@1 { |
| compatible = "brcm,bcm6328-cpu", "mips,mips4Kc"; |
| device_type = "cpu"; |
| reg = <1>; |
| bootph-all; |
| }; |
| }; |
| |
| clocks { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| bootph-all; |
| |
| hsspi_pll: hsspi-pll { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <133333333>; |
| }; |
| |
| periph_osc: periph-osc { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <50000000>; |
| bootph-all; |
| }; |
| |
| periph_clk: periph-clk { |
| compatible = "brcm,bcm6345-clk"; |
| reg = <0x10000004 0x4>; |
| #clock-cells = <1>; |
| }; |
| }; |
| |
| ubus { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| bootph-all; |
| |
| periph_rst: reset-controller@10000010 { |
| compatible = "brcm,bcm6345-reset"; |
| reg = <0x10000010 0x4>; |
| #reset-cells = <1>; |
| }; |
| |
| pll_cntl: syscon@10000068 { |
| compatible = "syscon"; |
| reg = <0x10000068 0x4>; |
| }; |
| |
| syscon-reboot { |
| compatible = "syscon-reboot"; |
| regmap = <&pll_cntl>; |
| offset = <0x0>; |
| mask = <0x1>; |
| }; |
| |
| wdt: watchdog@1000005c { |
| compatible = "brcm,bcm6345-wdt"; |
| reg = <0x1000005c 0xc>; |
| clocks = <&periph_osc>; |
| }; |
| |
| wdt-reboot { |
| compatible = "wdt-reboot"; |
| wdt = <&wdt>; |
| }; |
| |
| gpio: gpio-controller@10000084 { |
| compatible = "brcm,bcm6345-gpio"; |
| reg = <0x10000084 0x4>, <0x1000008c 0x4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| status = "disabled"; |
| }; |
| |
| uart0: serial@10000100 { |
| compatible = "brcm,bcm6345-uart"; |
| reg = <0x10000100 0x18>; |
| clocks = <&periph_osc>; |
| |
| status = "disabled"; |
| }; |
| |
| uart1: serial@10000120 { |
| compatible = "brcm,bcm6345-uart"; |
| reg = <0x10000120 0x18>; |
| clocks = <&periph_osc>; |
| |
| status = "disabled"; |
| }; |
| |
| nand: nand-controller@10000200 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "brcm,nand-bcm6368", |
| "brcm,brcmnand-v2.2", |
| "brcm,brcmnand"; |
| reg-names = "nand", |
| "nand-cache", |
| "nand-int-base"; |
| reg = <0x10000200 0x180>, |
| <0x10000400 0x200>, |
| <0x100000b0 0x10>; |
| |
| status = "disabled"; |
| }; |
| |
| leds: led-controller@10000800 { |
| compatible = "brcm,bcm6328-leds"; |
| reg = <0x10000800 0x24>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| spi: spi@10001000 { |
| compatible = "brcm,bcm6328-hsspi"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x10001000 0x600>; |
| clocks = <&periph_clk BCM6328_CLK_HSSPI>, <&hsspi_pll>; |
| clock-names = "hsspi", "pll"; |
| resets = <&periph_rst BCM6328_RST_SPI>; |
| spi-max-frequency = <33333334>; |
| num-cs = <3>; |
| |
| status = "disabled"; |
| }; |
| |
| periph_pwr: power-controller@10001848 { |
| compatible = "brcm,bcm6328-power-domain"; |
| reg = <0x10001848 0x4>; |
| #power-domain-cells = <1>; |
| }; |
| |
| ehci: usb-controller@10002500 { |
| compatible = "brcm,bcm6328-ehci", "generic-ehci"; |
| reg = <0x10002500 0x100>; |
| phys = <&usbh>; |
| big-endian; |
| |
| status = "disabled"; |
| }; |
| |
| ohci: usb-controller@10002600 { |
| compatible = "brcm,bcm6328-ohci", "generic-ohci"; |
| reg = <0x10002600 0x100>; |
| phys = <&usbh>; |
| big-endian; |
| |
| status = "disabled"; |
| }; |
| |
| usbh: usb-phy@10002700 { |
| compatible = "brcm,bcm6328-usbh"; |
| reg = <0x10002700 0x38>; |
| #phy-cells = <0>; |
| clocks = <&periph_clk BCM6328_CLK_USBH>; |
| clock-names = "usbh"; |
| power-domains = <&periph_pwr BCM6328_PWR_USBH>; |
| resets = <&periph_rst BCM6328_RST_USBH>; |
| |
| status = "disabled"; |
| }; |
| |
| memory-controller@10003000 { |
| compatible = "brcm,bcm6328-mc"; |
| reg = <0x10003000 0x864>; |
| bootph-all; |
| }; |
| |
| iudma: dma-controller@1000d800 { |
| compatible = "brcm,bcm6368-iudma"; |
| reg = <0x1000d800 0x80>, |
| <0x1000da00 0x80>, |
| <0x1000dc00 0x80>; |
| reg-names = "dma", |
| "dma-channels", |
| "dma-sram"; |
| #dma-cells = <1>; |
| dma-channels = <8>; |
| }; |
| |
| enet: ethernet@10e00000 { |
| compatible = "brcm,bcm6368-enet"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x10e00000 0x10000>; |
| clocks = <&periph_clk BCM6328_CLK_ROBOSW>; |
| resets = <&periph_rst BCM6328_RST_ENETSW>, |
| <&periph_rst BCM6328_RST_EPHY>; |
| dmas = <&iudma BCM6328_DMA_ENETSW_RX>, |
| <&iudma BCM6328_DMA_ENETSW_TX>; |
| dma-names = "rx", |
| "tx"; |
| brcm,num-ports = <5>; |
| |
| status = "disabled"; |
| }; |
| }; |
| }; |