| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright 2013 Freescale Semiconductor, Inc. |
| */ |
| |
| #include <common.h> |
| #include <init.h> |
| #include <asm/processor.h> |
| #include <asm/mmu.h> |
| #include <asm/cache.h> |
| #include <asm/immap_85xx.h> |
| #include <asm/io.h> |
| #include <env.h> |
| #include <miiphy.h> |
| #include <linux/libfdt.h> |
| #include <fdt_support.h> |
| #include <fsl_mdio.h> |
| #include <tsec.h> |
| #include <mmc.h> |
| #include <netdev.h> |
| #include <pci.h> |
| #include <fsl_ifc.h> |
| #include <asm/fsl_pci.h> |
| |
| #include "cpld.h" |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| int checkboard(void) |
| { |
| struct cpu_type *cpu = gd->arch.cpu; |
| struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE); |
| |
| printf("Board: %sPCIe, ", cpu->name); |
| printf("CPLD Ver: 0x%02x\n", in_8(&cpld_data->cpldver)); |
| |
| return 0; |
| } |
| |
| int board_early_init_f(void) |
| { |
| struct fsl_ifc ifc = {(void *)CONFIG_SYS_IFC_ADDR, (void *)NULL}; |
| |
| /* Clock configuration to access CPLD using IFC(GPCM) */ |
| setbits_be32(&ifc.gregs->ifc_gcr, 1 << IFC_GCR_TBCTL_TRN_TIME_SHIFT); |
| |
| return 0; |
| } |
| |
| int board_early_init_r(void) |
| { |
| const unsigned long flashbase = CONFIG_SYS_FLASH_BASE; |
| int flash_esel = find_tlb_idx((void *)flashbase, 1); |
| |
| /* |
| * Remap Boot flash region to caching-inhibited |
| * so that flash can be erased properly. |
| */ |
| |
| /* Flush d-cache and invalidate i-cache of any FLASH data */ |
| flush_dcache(); |
| invalidate_icache(); |
| |
| if (flash_esel == -1) { |
| /* very unlikely unless something is messed up */ |
| puts("Error: Could not find TLB for FLASH BASE\n"); |
| flash_esel = 1; /* give our best effort to continue */ |
| } else { |
| /* invalidate existing TLB entry for flash */ |
| disable_tlb(flash_esel); |
| } |
| |
| set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, |
| MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, |
| 0, flash_esel, BOOKE_PAGESZ_64M, 1); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PCI |
| void pci_init_board(void) |
| { |
| fsl_pcie_init_board(0); |
| } |
| #endif /* ifdef CONFIG_PCI */ |
| |
| int board_eth_init(bd_t *bis) |
| { |
| #ifdef CONFIG_TSEC_ENET |
| struct fsl_pq_mdio_info mdio_info; |
| struct tsec_info_struct tsec_info[2]; |
| int num = 0; |
| |
| #ifdef CONFIG_TSEC1 |
| SET_STD_TSEC_INFO(tsec_info[num], 1); |
| num++; |
| #endif |
| #ifdef CONFIG_TSEC2 |
| SET_STD_TSEC_INFO(tsec_info[num], 2); |
| num++; |
| #endif |
| if (!num) { |
| printf("No TSECs initialized\n"); |
| return 0; |
| } |
| |
| /* Register 1G MDIO bus */ |
| mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR; |
| mdio_info.name = DEFAULT_MII_NAME; |
| |
| fsl_pq_mdio_init(bis, &mdio_info); |
| |
| tsec_eth_init(bis, tsec_info, num); |
| #endif |
| |
| return pci_eth_init(bis); |
| } |
| |
| #if defined(CONFIG_OF_BOARD_SETUP) |
| void fdt_del_sec(void *blob, int offset) |
| { |
| int nodeoff = 0; |
| |
| while ((nodeoff = fdt_node_offset_by_compat_reg(blob, "fsl,sec-v6.0", |
| CONFIG_SYS_CCSRBAR_PHYS + CONFIG_SYS_FSL_SEC_OFFSET |
| + offset * CONFIG_SYS_FSL_SEC_IDX_OFFSET)) >= 0) { |
| fdt_del_node(blob, nodeoff); |
| offset++; |
| } |
| } |
| |
| int ft_board_setup(void *blob, bd_t *bd) |
| { |
| phys_addr_t base; |
| phys_size_t size; |
| struct cpu_type *cpu; |
| |
| cpu = gd->arch.cpu; |
| |
| ft_cpu_setup(blob, bd); |
| |
| base = env_get_bootm_low(); |
| size = env_get_bootm_size(); |
| |
| #if defined(CONFIG_PCI) |
| FT_FSL_PCI_SETUP; |
| #endif |
| |
| fdt_fixup_memory(blob, (u64)base, (u64)size); |
| if (cpu->soc_ver == SVR_C291) |
| fdt_del_sec(blob, 1); |
| else if (cpu->soc_ver == SVR_C292) |
| fdt_del_sec(blob, 2); |
| |
| return 0; |
| } |
| #endif |