| CONFIG_ARM=y |
| CONFIG_SKIP_LOWLEVEL_INIT_ONLY=y |
| CONFIG_SPL_SKIP_LOWLEVEL_INIT_ONLY=y |
| CONFIG_TPL_SKIP_LOWLEVEL_INIT_ONLY=y |
| # CONFIG_SPL_SYS_THUMB_BUILD is not set |
| # CONFIG_TPL_SYS_THUMB_BUILD is not set |
| # CONFIG_SPL_USE_ARCH_MEMCPY is not set |
| # CONFIG_SPL_USE_ARCH_MEMSET is not set |
| CONFIG_ARCH_ROCKCHIP=y |
| CONFIG_TEXT_BASE=0x60408000 |
| CONFIG_SYS_MALLOC_F_LEN=0x2000 |
| CONFIG_NR_DRAM_BANKS=1 |
| CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y |
| CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x78000000 |
| CONFIG_SF_DEFAULT_SPEED=20000000 |
| CONFIG_ENV_SIZE=0x8000 |
| CONFIG_DEFAULT_DEVICE_TREE="rk3066a-mk808" |
| CONFIG_SPL_TEXT_BASE=0x60000000 |
| CONFIG_DM_RESET=y |
| CONFIG_ROCKCHIP_RK3066=y |
| # CONFIG_ROCKCHIP_STIMER is not set |
| CONFIG_TPL_TEXT_BASE=0x10080c00 |
| CONFIG_TPL_STACK=0x1008FFFF |
| CONFIG_TARGET_MK808=y |
| CONFIG_SPL_STACK_R_ADDR=0x70000000 |
| CONFIG_SPL_STACK=0x1008ffff |
| CONFIG_SPL_STACK_R=y |
| CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x200000 |
| CONFIG_DEBUG_UART_BASE=0x20064000 |
| CONFIG_DEBUG_UART_CLOCK=24000000 |
| CONFIG_SPL_FS_FAT=y |
| CONFIG_SYS_LOAD_ADDR=0x70800800 |
| CONFIG_TPL_MAX_SIZE=0x7ffc |
| CONFIG_SPL_PAYLOAD="u-boot.bin" |
| CONFIG_DEBUG_UART=y |
| CONFIG_SD_BOOT=y |
| CONFIG_USE_PREBOOT=y |
| CONFIG_DEFAULT_FDT_FILE="rk3066a-mk808.dtb" |
| CONFIG_SYS_CBSIZE=256 |
| CONFIG_SYS_PBSIZE=276 |
| # CONFIG_DISPLAY_CPUINFO is not set |
| CONFIG_DISPLAY_BOARDINFO_LATE=y |
| CONFIG_BOARD_LATE_INIT=y |
| CONFIG_SPL_MAX_SIZE=0x32000 |
| CONFIG_SPL_PAD_TO=0x7f8000 |
| CONFIG_SPL_NO_BSS_LIMIT=y |
| # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set |
| CONFIG_SPL_SEPARATE_BSS=y |
| CONFIG_SPL_FS_EXT4=y |
| CONFIG_SYS_MMCSD_FS_BOOT_PARTITION=2 |
| CONFIG_TPL_NEEDS_SEPARATE_STACK=y |
| # CONFIG_BOOTM_PLAN9 is not set |
| # CONFIG_BOOTM_RTEMS is not set |
| # CONFIG_BOOTM_VXWORKS is not set |
| CONFIG_CMD_GPT=y |
| CONFIG_CMD_MMC=y |
| CONFIG_CMD_USB=y |
| CONFIG_CMD_ROCKUSB=y |
| CONFIG_CMD_USB_MASS_STORAGE=y |
| # CONFIG_CMD_SETEXPR is not set |
| CONFIG_CMD_CACHE=y |
| CONFIG_CMD_TIME=y |
| CONFIG_CMD_REGULATOR=y |
| CONFIG_SPL_OF_CONTROL=y |
| CONFIG_TPL_OF_CONTROL=y |
| CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" |
| CONFIG_OF_DTB_PROPS_REMOVE=y |
| CONFIG_SPL_OF_PLATDATA=y |
| CONFIG_TPL_OF_PLATDATA=y |
| CONFIG_SYS_RELOC_GD_ENV_ADDR=y |
| # CONFIG_NET is not set |
| CONFIG_TPL_DM=y |
| CONFIG_REGMAP=y |
| CONFIG_SPL_REGMAP=y |
| CONFIG_TPL_REGMAP=y |
| CONFIG_SYSCON=y |
| CONFIG_SPL_SYSCON=y |
| CONFIG_TPL_SYSCON=y |
| # CONFIG_SIMPLE_BUS is not set |
| # CONFIG_SPL_SIMPLE_BUS is not set |
| CONFIG_CLK=y |
| CONFIG_SPL_CLK=y |
| CONFIG_TPL_CLK=y |
| CONFIG_FASTBOOT_BUF_ADDR=0x80000000 |
| CONFIG_ROCKCHIP_GPIO=y |
| # CONFIG_SPL_DM_I2C is not set |
| CONFIG_LED=y |
| CONFIG_LED_GPIO=y |
| CONFIG_MMC_IO_VOLTAGE=y |
| CONFIG_SPL_MMC_IO_VOLTAGE=y |
| CONFIG_MMC_UHS_SUPPORT=y |
| CONFIG_SPL_MMC_UHS_SUPPORT=y |
| CONFIG_MMC_DW=y |
| CONFIG_MMC_DW_ROCKCHIP=y |
| CONFIG_PINCTRL=y |
| CONFIG_DM_PMIC=y |
| # CONFIG_SPL_PMIC_CHILDREN is not set |
| CONFIG_DM_REGULATOR_FIXED=y |
| CONFIG_DM_REGULATOR_GPIO=y |
| CONFIG_RAM=y |
| CONFIG_SPL_RAM=y |
| CONFIG_TPL_RAM=y |
| # CONFIG_REQUIRE_SERIAL_CONSOLE is not set |
| CONFIG_DEBUG_UART_SHIFT=2 |
| CONFIG_SYS_NS16550_MEM32=y |
| CONFIG_ROCKCHIP_SERIAL=y |
| CONFIG_SYSRESET=y |
| CONFIG_TIMER=y |
| CONFIG_SPL_TIMER=y |
| CONFIG_TPL_TIMER=y |
| CONFIG_DESIGNWARE_APB_TIMER=y |
| CONFIG_USB=y |
| CONFIG_USB_DWC2=y |
| CONFIG_ROCKCHIP_USB2_PHY=y |
| CONFIG_USB_GADGET=y |
| CONFIG_USB_GADGET_DWC2_OTG=y |
| CONFIG_USB_FUNCTION_ROCKUSB=y |
| CONFIG_SPL_TINY_MEMSET=y |
| CONFIG_ERRNO_STR=y |
| # CONFIG_TPL_OF_LIBFDT is not set |