include/configs/ma5d4evk.h - platform/external/u-boot - Gitiles

 /*
  * Aries MA5D4 configuration
  * Copyright (C) 2015 Marek Vasut <marex@denx.de>
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */

 #ifndef __MA5D4EVK_CONFIG_H__
 #define __MA5D4EVK_CONFIG_H__

 #define CONFIG_TIMESTAMP		/* Print image info with timestamp */

 #include "at91-sama5_common.h"
 #define CONFIG_SYS_USE_SERIALFLASH	1
 #define CONFIG_BOARD_LATE_INIT

 /* Timer */
 #define CONFIG_SYS_TIMER_COUNTER	0xfc06863c

 /*
  * Memory configurations
  */
 #define CONFIG_NR_DRAM_BANKS		1
 #define CONFIG_SYS_SDRAM_BASE		0x20000000
 #define CONFIG_SYS_SDRAM_SIZE		0x10000000

 #ifdef CONFIG_SPL_BUILD
 #define CONFIG_SYS_INIT_SP_ADDR		0x210000
 #else
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
 #endif

 /*
  * Environment
  */
 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 #define CONFIG_SYS_CONSOLE_ENV_OVERWRITE
 #define CONFIG_ENV_SIZE			0x4000
 #define CONFIG_SYS_MMC_ENV_DEV		0	/* eMMC */
 #define CONFIG_ENV_OFFSET		512	/* just after the MBR */

 /*
  * U-Boot general configurations
  */

 /*
  * Serial Driver
  */
 #define CONFIG_ATMEL_USART
 #define CONFIG_USART_BASE		0xf802c000
 #define CONFIG_USART_ID			6

 /*
  * Ethernet
  */
 #ifdef CONFIG_CMD_NET
 #define CONFIG_MACB
 #define CONFIG_RMII
 #define CONFIG_NET_RETRY_COUNT		20
 #define CONFIG_MACB_SEARCH_PHY
 #define CONFIG_ARP_TIMEOUT		200UL
 #define CONFIG_IP_DEFRAG
 #endif

 /*
  * LCD
  */
 #ifdef CONFIG_LCD
 #define CONFIG_BMP_16BPP
 #define CONFIG_BMP_24BPP
 #define CONFIG_BMP_32BPP
 #define LCD_BPP				LCD_COLOR16
 #define LCD_OUTPUT_BPP                  24
 #define CONFIG_ATMEL_HLCD
 #endif

 /*
  * SD/MMC
  */
 #ifdef CONFIG_CMD_MMC
 #define CONFIG_GENERIC_ATMEL_MCI
 #endif

 /*
  * SPI NOR (boot memory)
  */
 #ifdef CONFIG_CMD_SF
 #define CONFIG_ATMEL_SPI
 #define CONFIG_ATMEL_SPI0
 #define CONFIG_SPI_FLASH_ATMEL
 #define CONFIG_SF_DEFAULT_BUS		0
 #define CONFIG_SF_DEFAULT_CS		0
 #define CONFIG_SF_DEFAULT_SPEED		30000000
 #endif

 /*
  * USB
  */
 #ifdef CONFIG_CMD_USB

 /* USB device */
 #define CONFIG_USB_ETHER
 #define CONFIG_USB_ETH_RNDIS
 #define CONFIG_USBNET_MANUFACTURER      "AriesEmbedded"
 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 #define CONFIG_SYS_DFU_DATA_BUF_SIZE	(1 * 1024 * 1024)
 #define DFU_DEFAULT_POLL_TIMEOUT	300
 #endif

 /*
  * Boot Linux
  */
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_INITRD_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_BOOTFILE		"fitImage"
 #define CONFIG_LOADADDR		0x20800000
 #define CONFIG_BOOTCOMMAND	"run mmc_mmc"
 #define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR

 /*
  * Extra Environments
  */
 #define CONFIG_PREBOOT		"run try_bootscript"
 #define CONFIG_HOSTNAME		ma5d4evk

 #define CONFIG_EXTRA_ENV_SETTINGS					\
 	"consdev=ttyS3\0"						\
 	"baudrate=115200\0"						\
 	"bootscript=boot.scr\0"						\
 	"bootdev=/dev/mmcblk0p1\0"					\
 	"bootpart=0:1\0"						\
 	"rootdev=/dev/mmcblk0p2\0"					\
 	"netdev=eth0\0"							\
 	"dfu_alt_info=mmc raw 0 3867148288\0"				\
 	"kernel_addr_r=0x22000000\0"					\
 	"update_spi_firmware_spl_addr=0x21000000\0"			\
 	"update_spi_firmware_spl_filename=boot.bin\0"			\
 	"update_spi_firmware_addr=0x22000000\0"				\
 	"update_spi_firmware_filename=u-boot.img\0"			\
 	"update_spi_firmware="	/* Update the SPI flash firmware */	\
 		"if sf probe ; then "					\
 		"if tftp ${update_spi_firmware_spl_addr} "		\
 			"${update_spi_firmware_spl_filename} ; then "	\
 		"setenv update_spi_firmware_spl_filesize ${filesize} ; "\
 		"if tftp ${update_spi_firmware_addr} "			\
 			"${update_spi_firmware_filename} ; then "	\
 		"setenv update_spi_firmware_filesize ${filesize} ; "	\
 		"sf update ${update_spi_firmware_spl_addr} 0x0 "	\
 			"${update_spi_firmware_spl_filesize} ; "	\
 		"sf update ${update_spi_firmware_addr} 0x10000 "	\
 			"${update_spi_firmware_filesize} ; "		\
 		"fi ; "							\
 		"fi ; "							\
 		"fi\0"							\
 	"addcons="							\
 		"setenv bootargs ${bootargs} "				\
 		"console=${consdev},${baudrate}\0"			\
 	"addip="							\
 		"setenv bootargs ${bootargs} "				\
 		"ip=${ipaddr}:${serverip}:${gatewayip}:"		\
 			"${netmask}:${hostname}:${netdev}:off\0"	\
 	"addmisc="							\
 		"setenv bootargs ${bootargs} ${miscargs}\0"		\
 	"addargs=run addcons addmisc\0"					\
 	"mmcload="							\
 		"mmc rescan ; "						\
 		"load mmc ${bootpart} ${kernel_addr_r} ${bootfile}\0"	\
 	"netload="							\
 		"tftp ${kernel_addr_r} ${hostname}/${bootfile}\0"	\
 	"miscargs=nohlt panic=1\0"					\
 	"mmcargs=setenv bootargs root=${rootdev} rw rootwait\0"		\
 	"nfsargs="							\
 		"setenv bootargs root=/dev/nfs rw "			\
 			"nfsroot=${serverip}:${rootpath},v3,tcp\0"	\
 	"fdtimg=if test ${bootmode} = \"sf\" ; then "			\
 			"setenv kernel_fdt 1 ; "			\
 		"else ; "						\
 			"setenv kernel_fdt 2 ; "			\
 		"fi\0"							\
 	"mmc_mmc="							\
 		"run fdtimg mmcload mmcargs addargs ; "			\
 		"bootm ${kernel_addr_r}:kernel@1 - ${kernel_addr_r}:fdt@${kernel_fdt}\0" \
 	"mmc_nfs="							\
 		"run fdtimg mmcload nfsargs addip addargs ; "			\
 		"bootm ${kernel_addr_r}:kernel@1 - ${kernel_addr_r}:fdt@${kernel_fdt}\0" \
 	"net_mmc="							\
 		"run fdtimg netload mmcargs addargs ; "			\
 		"bootm ${kernel_addr_r}:kernel@1 - ${kernel_addr_r}:fdt@${kernel_fdt}\0" \
 	"net_nfs="							\
 		"run fdtimg netload nfsargs addip addargs ; "			\
 		"bootm ${kernel_addr_r}:kernel@1 - ${kernel_addr_r}:fdt@${kernel_fdt}\0" \
 	"try_bootscript="						\
 		"mmc rescan;"						\
 		"if test -e mmc 1:1 ${bootscript} ; then "		\
 		"if load mmc 1:1 ${kernel_addr_r} ${bootscript};"	\
 		"then ; "						\
 			"echo Running bootscript... ; "			\
 			"source ${kernel_addr_r} ; "			\
 		"fi ; "							\
 		"fi\0"
 /* SPL */
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_TEXT_BASE		0x200000
 #define CONFIG_SPL_MAX_SIZE		0x10000
 #define CONFIG_SPL_BSS_START_ADDR	0x20000000
 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000
 #define CONFIG_SYS_SPL_MALLOC_START	0x20080000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000

 #define CONFIG_SYS_MONITOR_LEN		(512 << 10)

 #define CONFIG_SPL_SPI_LOAD
 #define CONFIG_SYS_SPI_U_BOOT_OFFS	0x10000

 #define CONFIG_SYS_USE_MMC
 #define CONFIG_SPL_MMC_SUPPORT
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"
 #define CONFIG_SPL_FAT_SUPPORT
 #define CONFIG_SPL_LIBDISK_SUPPORT

 #endif	/* __MA5D4EVK_CONFIG_H__ */
	/*
	* Aries MA5D4 configuration
	* Copyright (C) 2015 Marek Vasut <marex@denx.de>
	*
	* SPDX-License-Identifier: GPL-2.0+
	*/

	#ifndef __MA5D4EVK_CONFIG_H__
	#define __MA5D4EVK_CONFIG_H__

	#define CONFIG_TIMESTAMP /* Print image info with timestamp */

	#include "at91-sama5_common.h"
	#define CONFIG_SYS_USE_SERIALFLASH 1
	#define CONFIG_BOARD_LATE_INIT

	/* Timer */
	#define CONFIG_SYS_TIMER_COUNTER 0xfc06863c

	/*
	* Memory configurations
	*/
	#define CONFIG_NR_DRAM_BANKS 1
	#define CONFIG_SYS_SDRAM_BASE 0x20000000
	#define CONFIG_SYS_SDRAM_SIZE 0x10000000

	#ifdef CONFIG_SPL_BUILD
	#define CONFIG_SYS_INIT_SP_ADDR 0x210000
	#else
	#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
	#endif

	/*
	* Environment
	*/
	#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
	#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE
	#define CONFIG_ENV_SIZE 0x4000
	#define CONFIG_SYS_MMC_ENV_DEV 0 /* eMMC */
	#define CONFIG_ENV_OFFSET 512 /* just after the MBR */

	/*
	* U-Boot general configurations
	*/

	/*
	* Serial Driver
	*/
	#define CONFIG_ATMEL_USART
	#define CONFIG_USART_BASE 0xf802c000
	#define CONFIG_USART_ID 6

	/*
	* Ethernet
	*/
	#ifdef CONFIG_CMD_NET
	#define CONFIG_MACB
	#define CONFIG_RMII
	#define CONFIG_NET_RETRY_COUNT 20
	#define CONFIG_MACB_SEARCH_PHY
	#define CONFIG_ARP_TIMEOUT 200UL
	#define CONFIG_IP_DEFRAG
	#endif

	/*
	* LCD
	*/
	#ifdef CONFIG_LCD
	#define CONFIG_BMP_16BPP
	#define CONFIG_BMP_24BPP
	#define CONFIG_BMP_32BPP
	#define LCD_BPP LCD_COLOR16
	#define LCD_OUTPUT_BPP 24
	#define CONFIG_ATMEL_HLCD
	#endif

	/*
	* SD/MMC
	*/
	#ifdef CONFIG_CMD_MMC
	#define CONFIG_GENERIC_ATMEL_MCI
	#endif

	/*
	* SPI NOR (boot memory)
	*/
	#ifdef CONFIG_CMD_SF
	#define CONFIG_ATMEL_SPI
	#define CONFIG_ATMEL_SPI0
	#define CONFIG_SPI_FLASH_ATMEL
	#define CONFIG_SF_DEFAULT_BUS 0
	#define CONFIG_SF_DEFAULT_CS 0
	#define CONFIG_SF_DEFAULT_SPEED 30000000
	#endif

	/*
	* USB
	*/
	#ifdef CONFIG_CMD_USB

	/* USB device */
	#define CONFIG_USB_ETHER
	#define CONFIG_USB_ETH_RNDIS
	#define CONFIG_USBNET_MANUFACTURER "AriesEmbedded"
	#define CONFIG_USB_FUNCTION_MASS_STORAGE
	#define CONFIG_SYS_DFU_DATA_BUF_SIZE (1 * 1024 * 1024)
	#define DFU_DEFAULT_POLL_TIMEOUT 300
	#endif

	/*
	* Boot Linux
	*/
	#define CONFIG_CMDLINE_TAG
	#define CONFIG_INITRD_TAG
	#define CONFIG_SETUP_MEMORY_TAGS
	#define CONFIG_BOOTFILE "fitImage"
	#define CONFIG_LOADADDR 0x20800000
	#define CONFIG_BOOTCOMMAND "run mmc_mmc"
	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR

	/*
	* Extra Environments
	*/
	#define CONFIG_PREBOOT "run try_bootscript"
	#define CONFIG_HOSTNAME ma5d4evk

	#define CONFIG_EXTRA_ENV_SETTINGS \
	"consdev=ttyS3\0" \
	"baudrate=115200\0" \
	"bootscript=boot.scr\0" \
	"bootdev=/dev/mmcblk0p1\0" \
	"bootpart=0:1\0" \
	"rootdev=/dev/mmcblk0p2\0" \
	"netdev=eth0\0" \
	"dfu_alt_info=mmc raw 0 3867148288\0" \
	"kernel_addr_r=0x22000000\0" \
	"update_spi_firmware_spl_addr=0x21000000\0" \
	"update_spi_firmware_spl_filename=boot.bin\0" \
	"update_spi_firmware_addr=0x22000000\0" \
	"update_spi_firmware_filename=u-boot.img\0" \
	"update_spi_firmware=" /* Update the SPI flash firmware */ \
	"if sf probe ; then " \
	"if tftp ${update_spi_firmware_spl_addr} " \
	"${update_spi_firmware_spl_filename} ; then " \
	"setenv update_spi_firmware_spl_filesize ${filesize} ; "\
	"if tftp ${update_spi_firmware_addr} " \
	"${update_spi_firmware_filename} ; then " \
	"setenv update_spi_firmware_filesize ${filesize} ; " \
	"sf update ${update_spi_firmware_spl_addr} 0x0 " \
	"${update_spi_firmware_spl_filesize} ; " \
	"sf update ${update_spi_firmware_addr} 0x10000 " \
	"${update_spi_firmware_filesize} ; " \
	"fi ; " \
	"fi ; " \
	"fi\0" \
	"addcons=" \
	"setenv bootargs ${bootargs} " \
	"console=${consdev},${baudrate}\0" \
	"addip=" \
	"setenv bootargs ${bootargs} " \
	"ip=${ipaddr}:${serverip}:${gatewayip}:" \
	"${netmask}:${hostname}:${netdev}:off\0" \
	"addmisc=" \
	"setenv bootargs ${bootargs} ${miscargs}\0" \
	"addargs=run addcons addmisc\0" \
	"mmcload=" \
	"mmc rescan ; " \
	"load mmc ${bootpart} ${kernel_addr_r} ${bootfile}\0" \
	"netload=" \
	"tftp ${kernel_addr_r} ${hostname}/${bootfile}\0" \
	"miscargs=nohlt panic=1\0" \
	"mmcargs=setenv bootargs root=${rootdev} rw rootwait\0" \
	"nfsargs=" \
	"setenv bootargs root=/dev/nfs rw " \
	"nfsroot=${serverip}:${rootpath},v3,tcp\0" \
	"fdtimg=if test ${bootmode} = \"sf\" ; then " \
	"setenv kernel_fdt 1 ; " \
	"else ; " \
	"setenv kernel_fdt 2 ; " \
	"fi\0" \
	"mmc_mmc=" \
	"run fdtimg mmcload mmcargs addargs ; " \
	"bootm ${kernel_addr_r}:kernel@1 - ${kernel_addr_r}:fdt@${kernel_fdt}\0" \
	"mmc_nfs=" \
	"run fdtimg mmcload nfsargs addip addargs ; " \
	"bootm ${kernel_addr_r}:kernel@1 - ${kernel_addr_r}:fdt@${kernel_fdt}\0" \
	"net_mmc=" \
	"run fdtimg netload mmcargs addargs ; " \
	"bootm ${kernel_addr_r}:kernel@1 - ${kernel_addr_r}:fdt@${kernel_fdt}\0" \
	"net_nfs=" \
	"run fdtimg netload nfsargs addip addargs ; " \
	"bootm ${kernel_addr_r}:kernel@1 - ${kernel_addr_r}:fdt@${kernel_fdt}\0" \
	"try_bootscript=" \
	"mmc rescan;" \
	"if test -e mmc 1:1 ${bootscript} ; then " \
	"if load mmc 1:1 ${kernel_addr_r} ${bootscript};" \
	"then ; " \
	"echo Running bootscript... ; " \
	"source ${kernel_addr_r} ; " \
	"fi ; " \
	"fi\0"
	/* SPL */
	#define CONFIG_SPL_FRAMEWORK
	#define CONFIG_SPL_TEXT_BASE 0x200000
	#define CONFIG_SPL_MAX_SIZE 0x10000
	#define CONFIG_SPL_BSS_START_ADDR 0x20000000
	#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
	#define CONFIG_SYS_SPL_MALLOC_START 0x20080000
	#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000

	#define CONFIG_SYS_MONITOR_LEN (512 << 10)

	#define CONFIG_SPL_SPI_LOAD
	#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x10000

	#define CONFIG_SYS_USE_MMC
	#define CONFIG_SPL_MMC_SUPPORT
	#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
	#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
	#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
	#define CONFIG_SPL_FAT_SUPPORT
	#define CONFIG_SPL_LIBDISK_SUPPORT

	#endif /* __MA5D4EVK_CONFIG_H__ */