| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Copyright 2017 Beckhoff Automation GmbH & Co. KG |
| * based on imx53-qsb.dts |
| */ |
| |
| /dts-v1/; |
| #include "imx53.dtsi" |
| |
| / { |
| model = "Beckhoff CX9020 Embedded PC"; |
| compatible = "bhf,cx9020", "fsl,imx53"; |
| |
| chosen { |
| stdout-path = &uart2; |
| }; |
| |
| memory@70000000 { |
| device_type = "memory"; |
| reg = <0x70000000 0x20000000>, |
| <0xb0000000 0x20000000>; |
| }; |
| |
| display-0 { |
| #address-cells =<1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx-parallel-display"; |
| interface-pix-fmt = "rgb24"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ipu_disp0>; |
| |
| port@0 { |
| reg = <0>; |
| |
| display0_in: endpoint { |
| remote-endpoint = <&ipu_di0_disp0>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| |
| display0_out: endpoint { |
| remote-endpoint = <&tfp410_in>; |
| }; |
| }; |
| }; |
| |
| dvi-connector { |
| compatible = "dvi-connector"; |
| ddc-i2c-bus = <&i2c2>; |
| digital; |
| |
| port { |
| dvi_connector_in: endpoint { |
| remote-endpoint = <&tfp410_out>; |
| }; |
| }; |
| }; |
| |
| dvi-converter { |
| compatible = "ti,tfp410"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| |
| tfp410_in: endpoint { |
| remote-endpoint = <&display0_out>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| |
| tfp410_out: endpoint { |
| remote-endpoint = <&dvi_connector_in>; |
| }; |
| }; |
| }; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| |
| led-pwr-r { |
| gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| led-pwr-g { |
| gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; |
| default-state = "on"; |
| }; |
| |
| led-pwr-b { |
| gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| led-sd1-b { |
| linux,default-trigger = "mmc0"; |
| gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| led-sd2-b { |
| linux,default-trigger = "mmc1"; |
| gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
| |
| regulator-3p2v { |
| compatible = "regulator-fixed"; |
| regulator-name = "3P2V"; |
| regulator-min-microvolt = <3200000>; |
| regulator-max-microvolt = <3200000>; |
| regulator-always-on; |
| }; |
| |
| reg_usb_vbus: regulator-vbus { |
| compatible = "regulator-fixed"; |
| regulator-name = "usb_vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| }; |
| |
| &esdhc1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_esdhc1>; |
| cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; |
| bus-width = <4>; |
| status = "okay"; |
| }; |
| |
| &esdhc2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_esdhc2>; |
| cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; |
| bus-width = <4>; |
| status = "okay"; |
| }; |
| |
| &fec { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_fec>; |
| phy-mode = "rmii"; |
| phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; |
| status = "okay"; |
| }; |
| |
| &i2c2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c2>; |
| status = "okay"; |
| }; |
| |
| &ipu_di0_disp0 { |
| remote-endpoint = <&display0_in>; |
| }; |
| |
| &uart2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart2>; |
| fsl,dte-mode; |
| status = "okay"; |
| }; |
| |
| &usbh1 { |
| vbus-supply = <®_usb_vbus>; |
| phy_type = "utmi"; |
| status = "okay"; |
| }; |
| |
| &usbotg { |
| dr_mode = "peripheral"; |
| status = "okay"; |
| }; |
| |
| &vpu { |
| status = "okay"; |
| }; |
| |
| &iomuxc { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_hog>; |
| |
| pinctrl_hog: hoggrp { |
| fsl,pins = < |
| MX53_PAD_GPIO_0__CCM_CLKO 0x1c4 |
| MX53_PAD_GPIO_16__I2C3_SDA 0x1c4 |
| MX53_PAD_EIM_D22__GPIO3_22 0x1c4 |
| MX53_PAD_EIM_D23__GPIO3_23 0x1e4 |
| MX53_PAD_EIM_D24__GPIO3_24 0x1e4 |
| >; |
| }; |
| |
| pinctrl_esdhc1: esdhc1grp { |
| fsl,pins = < |
| MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5 |
| MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5 |
| MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5 |
| MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5 |
| MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5 |
| MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5 |
| MX53_PAD_GPIO_1__ESDHC1_CD 0x1c4 |
| MX53_PAD_EIM_D17__GPIO3_17 0x1e4 |
| MX53_PAD_GPIO_3__GPIO1_3 0x1c4 |
| >; |
| }; |
| |
| pinctrl_esdhc2: esdhc2grp { |
| fsl,pins = < |
| MX53_PAD_SD2_DATA0__ESDHC2_DAT0 0x1d5 |
| MX53_PAD_SD2_DATA1__ESDHC2_DAT1 0x1d5 |
| MX53_PAD_SD2_DATA2__ESDHC2_DAT2 0x1d5 |
| MX53_PAD_SD2_DATA3__ESDHC2_DAT3 0x1d5 |
| MX53_PAD_SD2_CMD__ESDHC2_CMD 0x1d5 |
| MX53_PAD_SD2_CLK__ESDHC2_CLK 0x1d5 |
| MX53_PAD_GPIO_4__ESDHC2_CD 0x1e4 |
| MX53_PAD_EIM_D20__GPIO3_20 0x1e4 |
| MX53_PAD_GPIO_8__GPIO1_8 0x1c4 |
| >; |
| }; |
| |
| pinctrl_fec: fecgrp { |
| fsl,pins = < |
| MX53_PAD_FEC_MDC__FEC_MDC 0x4 |
| MX53_PAD_FEC_MDIO__FEC_MDIO 0x1fc |
| MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x180 |
| MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x180 |
| MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x180 |
| MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x180 |
| MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x180 |
| MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x4 |
| MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x4 |
| MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x4 |
| >; |
| }; |
| |
| pinctrl_i2c2: i2c2grp { |
| fsl,pins = < |
| MX53_PAD_KEY_ROW3__I2C2_SDA 0xc0000000 |
| MX53_PAD_KEY_COL3__I2C2_SCL 0xc0000000 |
| >; |
| }; |
| |
| pinctrl_ipu_disp0: ipudisp0grp { |
| fsl,pins = < |
| MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK 0x5 |
| MX53_PAD_DI0_PIN15__IPU_DI0_PIN15 0x5 |
| MX53_PAD_DI0_PIN2__IPU_DI0_PIN2 0x5 |
| MX53_PAD_DI0_PIN3__IPU_DI0_PIN3 0x5 |
| MX53_PAD_DI0_PIN4__IPU_DI0_PIN4 0x5 |
| MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0 0x5 |
| MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1 0x5 |
| MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2 0x5 |
| MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3 0x5 |
| MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4 0x5 |
| MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5 0x5 |
| MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6 0x5 |
| MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7 0x5 |
| MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8 0x5 |
| MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9 0x5 |
| MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10 0x5 |
| MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11 0x5 |
| MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12 0x5 |
| MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13 0x5 |
| MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14 0x5 |
| MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15 0x5 |
| MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16 0x5 |
| MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17 0x5 |
| MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18 0x5 |
| MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19 0x5 |
| MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20 0x5 |
| MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21 0x5 |
| MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22 0x5 |
| MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23 0x5 |
| >; |
| }; |
| |
| pinctrl_uart2: uart2grp { |
| fsl,pins = < |
| MX53_PAD_EIM_D26__UART2_RXD_MUX 0x1e4 |
| MX53_PAD_EIM_D27__UART2_TXD_MUX 0x1e4 |
| MX53_PAD_EIM_D28__UART2_RTS 0x1e4 |
| MX53_PAD_EIM_D29__UART2_CTS 0x1e4 |
| >; |
| }; |
| }; |