| /* |
| * Copyright (C) 2012 Samsung Electronics |
| * |
| * Author: Donghwa Lee <dh09.lee@samsung.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <config.h> |
| #include <common.h> |
| #include <malloc.h> |
| #include <linux/err.h> |
| #include <asm/arch/clk.h> |
| #include <asm/arch/cpu.h> |
| #include <asm/arch/dp_info.h> |
| #include <asm/arch/dp.h> |
| |
| #include "exynos_dp_lowlevel.h" |
| |
| static struct exynos_dp_platform_data *dp_pd; |
| |
| void __exynos_set_dp_phy(unsigned int onoff) |
| { |
| } |
| void exynos_set_dp_phy(unsigned int onoff) |
| __attribute__((weak, alias("__exynos_set_dp_phy"))); |
| |
| static void exynos_dp_disp_info(struct edp_disp_info *disp_info) |
| { |
| disp_info->h_total = disp_info->h_res + disp_info->h_sync_width + |
| disp_info->h_back_porch + disp_info->h_front_porch; |
| disp_info->v_total = disp_info->v_res + disp_info->v_sync_width + |
| disp_info->v_back_porch + disp_info->v_front_porch; |
| |
| return; |
| } |
| |
| static int exynos_dp_init_dp(void) |
| { |
| int ret; |
| exynos_dp_reset(); |
| |
| /* SW defined function Normal operation */ |
| exynos_dp_enable_sw_func(DP_ENABLE); |
| |
| ret = exynos_dp_init_analog_func(); |
| if (ret != EXYNOS_DP_SUCCESS) |
| return ret; |
| |
| exynos_dp_init_hpd(); |
| exynos_dp_init_aux(); |
| |
| return ret; |
| } |
| |
| static unsigned char exynos_dp_calc_edid_check_sum(unsigned char *edid_data) |
| { |
| int i; |
| unsigned char sum = 0; |
| |
| for (i = 0; i < EDID_BLOCK_LENGTH; i++) |
| sum = sum + edid_data[i]; |
| |
| return sum; |
| } |
| |
| static unsigned int exynos_dp_read_edid(void) |
| { |
| unsigned char edid[EDID_BLOCK_LENGTH * 2]; |
| unsigned int extend_block = 0; |
| unsigned char sum; |
| unsigned char test_vector; |
| int retval; |
| |
| /* |
| * EDID device address is 0x50. |
| * However, if necessary, you must have set upper address |
| * into E-EDID in I2C device, 0x30. |
| */ |
| |
| /* Read Extension Flag, Number of 128-byte EDID extension blocks */ |
| exynos_dp_read_byte_from_i2c(I2C_EDID_DEVICE_ADDR, EDID_EXTENSION_FLAG, |
| &extend_block); |
| |
| if (extend_block > 0) { |
| printf("DP EDID data includes a single extension!\n"); |
| |
| /* Read EDID data */ |
| retval = exynos_dp_read_bytes_from_i2c(I2C_EDID_DEVICE_ADDR, |
| EDID_HEADER_PATTERN, |
| EDID_BLOCK_LENGTH, |
| &edid[EDID_HEADER_PATTERN]); |
| if (retval != 0) { |
| printf("DP EDID Read failed!\n"); |
| return -1; |
| } |
| sum = exynos_dp_calc_edid_check_sum(edid); |
| if (sum != 0) { |
| printf("DP EDID bad checksum!\n"); |
| return -1; |
| } |
| |
| /* Read additional EDID data */ |
| retval = exynos_dp_read_bytes_from_i2c(I2C_EDID_DEVICE_ADDR, |
| EDID_BLOCK_LENGTH, |
| EDID_BLOCK_LENGTH, |
| &edid[EDID_BLOCK_LENGTH]); |
| if (retval != 0) { |
| printf("DP EDID Read failed!\n"); |
| return -1; |
| } |
| sum = exynos_dp_calc_edid_check_sum(&edid[EDID_BLOCK_LENGTH]); |
| if (sum != 0) { |
| printf("DP EDID bad checksum!\n"); |
| return -1; |
| } |
| |
| exynos_dp_read_byte_from_dpcd(DPCD_TEST_REQUEST, |
| &test_vector); |
| if (test_vector & DPCD_TEST_EDID_READ) { |
| exynos_dp_write_byte_to_dpcd(DPCD_TEST_EDID_CHECKSUM, |
| edid[EDID_BLOCK_LENGTH + EDID_CHECKSUM]); |
| exynos_dp_write_byte_to_dpcd(DPCD_TEST_RESPONSE, |
| DPCD_TEST_EDID_CHECKSUM_WRITE); |
| } |
| } else { |
| debug("DP EDID data does not include any extensions.\n"); |
| |
| /* Read EDID data */ |
| retval = exynos_dp_read_bytes_from_i2c(I2C_EDID_DEVICE_ADDR, |
| EDID_HEADER_PATTERN, |
| EDID_BLOCK_LENGTH, |
| &edid[EDID_HEADER_PATTERN]); |
| |
| if (retval != 0) { |
| printf("DP EDID Read failed!\n"); |
| return -1; |
| } |
| sum = exynos_dp_calc_edid_check_sum(edid); |
| if (sum != 0) { |
| printf("DP EDID bad checksum!\n"); |
| return -1; |
| } |
| |
| exynos_dp_read_byte_from_dpcd(DPCD_TEST_REQUEST, |
| &test_vector); |
| if (test_vector & DPCD_TEST_EDID_READ) { |
| exynos_dp_write_byte_to_dpcd(DPCD_TEST_EDID_CHECKSUM, |
| edid[EDID_CHECKSUM]); |
| exynos_dp_write_byte_to_dpcd(DPCD_TEST_RESPONSE, |
| DPCD_TEST_EDID_CHECKSUM_WRITE); |
| } |
| } |
| |
| debug("DP EDID Read success!\n"); |
| |
| return 0; |
| } |
| |
| static unsigned int exynos_dp_handle_edid(struct edp_device_info *edp_info) |
| { |
| unsigned char buf[12]; |
| unsigned int ret; |
| unsigned char temp; |
| unsigned char retry_cnt; |
| unsigned char dpcd_rev[16]; |
| unsigned char lane_bw[16]; |
| unsigned char lane_cnt[16]; |
| |
| memset(dpcd_rev, 0, 16); |
| memset(lane_bw, 0, 16); |
| memset(lane_cnt, 0, 16); |
| memset(buf, 0, 12); |
| |
| retry_cnt = 5; |
| while (retry_cnt) { |
| /* Read DPCD 0x0000-0x000b */ |
| ret = exynos_dp_read_bytes_from_dpcd(DPCD_DPCD_REV, 12, |
| buf); |
| if (ret != EXYNOS_DP_SUCCESS) { |
| if (retry_cnt == 0) { |
| printf("DP read_byte_from_dpcd() failed\n"); |
| return ret; |
| } |
| retry_cnt--; |
| } else |
| break; |
| } |
| |
| /* */ |
| temp = buf[DPCD_DPCD_REV]; |
| if (temp == DP_DPCD_REV_10 || temp == DP_DPCD_REV_11) |
| edp_info->dpcd_rev = temp; |
| else { |
| printf("DP Wrong DPCD Rev : %x\n", temp); |
| return -ENODEV; |
| } |
| |
| temp = buf[DPCD_MAX_LINK_RATE]; |
| if (temp == DP_LANE_BW_1_62 || temp == DP_LANE_BW_2_70) |
| edp_info->lane_bw = temp; |
| else { |
| printf("DP Wrong MAX LINK RATE : %x\n", temp); |
| return -EINVAL; |
| } |
| |
| /*Refer VESA Display Port Stnadard Ver1.1a Page 120 */ |
| if (edp_info->dpcd_rev == DP_DPCD_REV_11) { |
| temp = buf[DPCD_MAX_LANE_COUNT] & 0x1f; |
| if (buf[DPCD_MAX_LANE_COUNT] & 0x80) |
| edp_info->dpcd_efc = 1; |
| else |
| edp_info->dpcd_efc = 0; |
| } else { |
| temp = buf[DPCD_MAX_LANE_COUNT]; |
| edp_info->dpcd_efc = 0; |
| } |
| |
| if (temp == DP_LANE_CNT_1 || temp == DP_LANE_CNT_2 || |
| temp == DP_LANE_CNT_4) { |
| edp_info->lane_cnt = temp; |
| } else { |
| printf("DP Wrong MAX LANE COUNT : %x\n", temp); |
| return -EINVAL; |
| } |
| |
| ret = exynos_dp_read_edid(); |
| if (ret != EXYNOS_DP_SUCCESS) { |
| printf("DP exynos_dp_read_edid() failed\n"); |
| return -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| static void exynos_dp_init_training(void) |
| { |
| /* |
| * MACRO_RST must be applied after the PLL_LOCK to avoid |
| * the DP inter pair skew issue for at least 10 us |
| */ |
| exynos_dp_reset_macro(); |
| |
| /* All DP analog module power up */ |
| exynos_dp_set_analog_power_down(POWER_ALL, 0); |
| } |
| |
| static unsigned int exynos_dp_link_start(struct edp_device_info *edp_info) |
| { |
| unsigned char buf[5]; |
| unsigned int ret = 0; |
| |
| debug("DP: %s was called\n", __func__); |
| |
| edp_info->lt_info.lt_status = DP_LT_CR; |
| edp_info->lt_info.ep_loop = 0; |
| edp_info->lt_info.cr_loop[0] = 0; |
| edp_info->lt_info.cr_loop[1] = 0; |
| edp_info->lt_info.cr_loop[2] = 0; |
| edp_info->lt_info.cr_loop[3] = 0; |
| |
| /* Set sink to D0 (Sink Not Ready) mode. */ |
| ret = exynos_dp_write_byte_to_dpcd(DPCD_SINK_POWER_STATE, |
| DPCD_SET_POWER_STATE_D0); |
| if (ret != EXYNOS_DP_SUCCESS) { |
| printf("DP write_dpcd_byte failed\n"); |
| return ret; |
| } |
| |
| /* Set link rate and count as you want to establish*/ |
| exynos_dp_set_link_bandwidth(edp_info->lane_bw); |
| exynos_dp_set_lane_count(edp_info->lane_cnt); |
| |
| /* Setup RX configuration */ |
| buf[0] = edp_info->lane_bw; |
| buf[1] = edp_info->lane_cnt; |
| |
| ret = exynos_dp_write_bytes_to_dpcd(DPCD_LINK_BW_SET, 2, |
| buf); |
| if (ret != EXYNOS_DP_SUCCESS) { |
| printf("DP write_dpcd_byte failed\n"); |
| return ret; |
| } |
| |
| exynos_dp_set_lane_pre_emphasis(PRE_EMPHASIS_LEVEL_0, |
| edp_info->lane_cnt); |
| |
| /* Set training pattern 1 */ |
| exynos_dp_set_training_pattern(TRAINING_PTN1); |
| |
| /* Set RX training pattern */ |
| buf[0] = DPCD_SCRAMBLING_DISABLED | DPCD_TRAINING_PATTERN_1; |
| |
| buf[1] = DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_0 | |
| DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_0; |
| buf[2] = DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_0 | |
| DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_0; |
| buf[3] = DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_0 | |
| DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_0; |
| buf[4] = DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_0 | |
| DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_0; |
| |
| ret = exynos_dp_write_bytes_to_dpcd(DPCD_TRAINING_PATTERN_SET, |
| 5, buf); |
| if (ret != EXYNOS_DP_SUCCESS) { |
| printf("DP write_dpcd_byte failed\n"); |
| return ret; |
| } |
| |
| return ret; |
| } |
| |
| static unsigned int exynos_dp_training_pattern_dis(void) |
| { |
| unsigned int ret = EXYNOS_DP_SUCCESS; |
| |
| exynos_dp_set_training_pattern(DP_NONE); |
| |
| ret = exynos_dp_write_byte_to_dpcd(DPCD_TRAINING_PATTERN_SET, |
| DPCD_TRAINING_PATTERN_DISABLED); |
| if (ret != EXYNOS_DP_SUCCESS) { |
| printf("DP requst_link_traninig_req failed\n"); |
| return -EAGAIN; |
| } |
| |
| return ret; |
| } |
| |
| static unsigned int exynos_dp_enable_rx_to_enhanced_mode(unsigned char enable) |
| { |
| unsigned char data; |
| unsigned int ret = EXYNOS_DP_SUCCESS; |
| |
| ret = exynos_dp_read_byte_from_dpcd(DPCD_LANE_COUNT_SET, |
| &data); |
| if (ret != EXYNOS_DP_SUCCESS) { |
| printf("DP read_from_dpcd failed\n"); |
| return -EAGAIN; |
| } |
| |
| if (enable) |
| data = DPCD_ENHANCED_FRAME_EN | DPCD_LN_COUNT_SET(data); |
| else |
| data = DPCD_LN_COUNT_SET(data); |
| |
| ret = exynos_dp_write_byte_to_dpcd(DPCD_LANE_COUNT_SET, |
| data); |
| if (ret != EXYNOS_DP_SUCCESS) { |
| printf("DP write_to_dpcd failed\n"); |
| return -EAGAIN; |
| |
| } |
| |
| return ret; |
| } |
| |
| static unsigned int exynos_dp_set_enhanced_mode(unsigned char enhance_mode) |
| { |
| unsigned int ret = EXYNOS_DP_SUCCESS; |
| |
| ret = exynos_dp_enable_rx_to_enhanced_mode(enhance_mode); |
| if (ret != EXYNOS_DP_SUCCESS) { |
| printf("DP rx_enhance_mode failed\n"); |
| return -EAGAIN; |
| } |
| |
| exynos_dp_enable_enhanced_mode(enhance_mode); |
| |
| return ret; |
| } |
| |
| static int exynos_dp_read_dpcd_lane_stat(struct edp_device_info *edp_info, |
| unsigned char *status) |
| { |
| unsigned int ret, i; |
| unsigned char buf[2]; |
| unsigned char lane_stat[DP_LANE_CNT_4] = {0,}; |
| unsigned char shift_val[DP_LANE_CNT_4] = {0,}; |
| |
| shift_val[0] = 0; |
| shift_val[1] = 4; |
| shift_val[2] = 0; |
| shift_val[3] = 4; |
| |
| ret = exynos_dp_read_bytes_from_dpcd(DPCD_LANE0_1_STATUS, 2, buf); |
| if (ret != EXYNOS_DP_SUCCESS) { |
| printf("DP read lane status failed\n"); |
| return ret; |
| } |
| |
| for (i = 0; i < edp_info->lane_cnt; i++) { |
| lane_stat[i] = (buf[(i / 2)] >> shift_val[i]) & 0x0f; |
| if (lane_stat[0] != lane_stat[i]) { |
| printf("Wrong lane status\n"); |
| return -EINVAL; |
| } |
| } |
| |
| *status = lane_stat[0]; |
| |
| return ret; |
| } |
| |
| static unsigned int exynos_dp_read_dpcd_adj_req(unsigned char lane_num, |
| unsigned char *sw, unsigned char *em) |
| { |
| unsigned int ret = EXYNOS_DP_SUCCESS; |
| unsigned char buf; |
| unsigned int dpcd_addr; |
| unsigned char shift_val[DP_LANE_CNT_4] = {0, 4, 0, 4}; |
| |
| /*lane_num value is used as arry index, so this range 0 ~ 3 */ |
| dpcd_addr = DPCD_ADJUST_REQUEST_LANE0_1 + (lane_num / 2); |
| |
| ret = exynos_dp_read_byte_from_dpcd(dpcd_addr, &buf); |
| if (ret != EXYNOS_DP_SUCCESS) { |
| printf("DP read adjust request failed\n"); |
| return -EAGAIN; |
| } |
| |
| *sw = ((buf >> shift_val[lane_num]) & 0x03); |
| *em = ((buf >> shift_val[lane_num]) & 0x0c) >> 2; |
| |
| return ret; |
| } |
| |
| static int exynos_dp_equalizer_err_link(struct edp_device_info *edp_info) |
| { |
| int ret; |
| |
| ret = exynos_dp_training_pattern_dis(); |
| if (ret != EXYNOS_DP_SUCCESS) { |
| printf("DP training_patter_disable() failed\n"); |
| edp_info->lt_info.lt_status = DP_LT_FAIL; |
| } |
| |
| ret = exynos_dp_set_enhanced_mode(edp_info->dpcd_efc); |
| if (ret != EXYNOS_DP_SUCCESS) { |
| printf("DP set_enhanced_mode() failed\n"); |
| edp_info->lt_info.lt_status = DP_LT_FAIL; |
| } |
| |
| return ret; |
| } |
| |
| static int exynos_dp_reduce_link_rate(struct edp_device_info *edp_info) |
| { |
| int ret; |
| |
| if (edp_info->lane_bw == DP_LANE_BW_2_70) { |
| edp_info->lane_bw = DP_LANE_BW_1_62; |
| printf("DP Change lane bw to 1.62Gbps\n"); |
| edp_info->lt_info.lt_status = DP_LT_START; |
| ret = EXYNOS_DP_SUCCESS; |
| } else { |
| ret = exynos_dp_training_pattern_dis(); |
| if (ret != EXYNOS_DP_SUCCESS) |
| printf("DP training_patter_disable() failed\n"); |
| |
| ret = exynos_dp_set_enhanced_mode(edp_info->dpcd_efc); |
| if (ret != EXYNOS_DP_SUCCESS) |
| printf("DP set_enhanced_mode() failed\n"); |
| |
| edp_info->lt_info.lt_status = DP_LT_FAIL; |
| } |
| |
| return ret; |
| } |
| |
| static unsigned int exynos_dp_process_clock_recovery(struct edp_device_info |
| *edp_info) |
| { |
| unsigned int ret = EXYNOS_DP_SUCCESS; |
| unsigned char lane_stat; |
| unsigned char lt_ctl_val[DP_LANE_CNT_4] = {0, }; |
| unsigned int i; |
| unsigned char adj_req_sw; |
| unsigned char adj_req_em; |
| unsigned char buf[5]; |
| |
| debug("DP: %s was called\n", __func__); |
| mdelay(1); |
| |
| ret = exynos_dp_read_dpcd_lane_stat(edp_info, &lane_stat); |
| if (ret != EXYNOS_DP_SUCCESS) { |
| printf("DP read lane status failed\n"); |
| edp_info->lt_info.lt_status = DP_LT_FAIL; |
| return ret; |
| } |
| |
| if (lane_stat & DP_LANE_STAT_CR_DONE) { |
| debug("DP clock Recovery training succeed\n"); |
| exynos_dp_set_training_pattern(TRAINING_PTN2); |
| |
| for (i = 0; i < edp_info->lane_cnt; i++) { |
| ret = exynos_dp_read_dpcd_adj_req(i, &adj_req_sw, |
| &adj_req_em); |
| if (ret != EXYNOS_DP_SUCCESS) { |
| edp_info->lt_info.lt_status = DP_LT_FAIL; |
| return ret; |
| } |
| |
| lt_ctl_val[i] = 0; |
| lt_ctl_val[i] = adj_req_em << 3 | adj_req_sw; |
| |
| if ((adj_req_sw == VOLTAGE_LEVEL_3) |
| || (adj_req_em == PRE_EMPHASIS_LEVEL_3)) { |
| lt_ctl_val[i] |= MAX_DRIVE_CURRENT_REACH_3 | |
| MAX_PRE_EMPHASIS_REACH_3; |
| } |
| exynos_dp_set_lanex_pre_emphasis(lt_ctl_val[i], i); |
| } |
| |
| buf[0] = DPCD_SCRAMBLING_DISABLED | DPCD_TRAINING_PATTERN_2; |
| buf[1] = lt_ctl_val[0]; |
| buf[2] = lt_ctl_val[1]; |
| buf[3] = lt_ctl_val[2]; |
| buf[4] = lt_ctl_val[3]; |
| |
| ret = exynos_dp_write_bytes_to_dpcd( |
| DPCD_TRAINING_PATTERN_SET, 5, buf); |
| if (ret != EXYNOS_DP_SUCCESS) { |
| printf("DP write traning pattern1 failed\n"); |
| edp_info->lt_info.lt_status = DP_LT_FAIL; |
| return ret; |
| } else |
| edp_info->lt_info.lt_status = DP_LT_ET; |
| } else { |
| for (i = 0; i < edp_info->lane_cnt; i++) { |
| lt_ctl_val[i] = exynos_dp_get_lanex_pre_emphasis(i); |
| ret = exynos_dp_read_dpcd_adj_req(i, |
| &adj_req_sw, &adj_req_em); |
| if (ret != EXYNOS_DP_SUCCESS) { |
| printf("DP read adj req failed\n"); |
| edp_info->lt_info.lt_status = DP_LT_FAIL; |
| return ret; |
| } |
| |
| if ((adj_req_sw == VOLTAGE_LEVEL_3) || |
| (adj_req_em == PRE_EMPHASIS_LEVEL_3)) |
| ret = exynos_dp_reduce_link_rate(edp_info); |
| |
| if ((DRIVE_CURRENT_SET_0_GET(lt_ctl_val[i]) == |
| adj_req_sw) && |
| (PRE_EMPHASIS_SET_0_GET(lt_ctl_val[i]) == |
| adj_req_em)) { |
| edp_info->lt_info.cr_loop[i]++; |
| if (edp_info->lt_info.cr_loop[i] == MAX_CR_LOOP) |
| ret = exynos_dp_reduce_link_rate( |
| edp_info); |
| } |
| |
| lt_ctl_val[i] = 0; |
| lt_ctl_val[i] = adj_req_em << 3 | adj_req_sw; |
| |
| if ((adj_req_sw == VOLTAGE_LEVEL_3) || |
| (adj_req_em == PRE_EMPHASIS_LEVEL_3)) { |
| lt_ctl_val[i] |= MAX_DRIVE_CURRENT_REACH_3 | |
| MAX_PRE_EMPHASIS_REACH_3; |
| } |
| exynos_dp_set_lanex_pre_emphasis(lt_ctl_val[i], i); |
| } |
| |
| ret = exynos_dp_write_bytes_to_dpcd( |
| DPCD_TRAINING_LANE0_SET, 4, lt_ctl_val); |
| if (ret != EXYNOS_DP_SUCCESS) { |
| printf("DP write traning pattern2 failed\n"); |
| edp_info->lt_info.lt_status = DP_LT_FAIL; |
| return ret; |
| } |
| } |
| |
| return ret; |
| } |
| |
| static unsigned int exynos_dp_process_equalizer_training(struct edp_device_info |
| *edp_info) |
| { |
| unsigned int ret = EXYNOS_DP_SUCCESS; |
| unsigned char lane_stat, adj_req_sw, adj_req_em, i; |
| unsigned char lt_ctl_val[DP_LANE_CNT_4] = {0,}; |
| unsigned char interlane_aligned = 0; |
| unsigned char f_bw; |
| unsigned char f_lane_cnt; |
| unsigned char sink_stat; |
| |
| mdelay(1); |
| |
| ret = exynos_dp_read_dpcd_lane_stat(edp_info, &lane_stat); |
| if (ret != EXYNOS_DP_SUCCESS) { |
| printf("DP read lane status failed\n"); |
| edp_info->lt_info.lt_status = DP_LT_FAIL; |
| return ret; |
| } |
| |
| debug("DP lane stat : %x\n", lane_stat); |
| |
| if (lane_stat & DP_LANE_STAT_CR_DONE) { |
| ret = exynos_dp_read_byte_from_dpcd(DPCD_LN_ALIGN_UPDATED, |
| &sink_stat); |
| if (ret != EXYNOS_DP_SUCCESS) { |
| edp_info->lt_info.lt_status = DP_LT_FAIL; |
| |
| return ret; |
| } |
| |
| interlane_aligned = (sink_stat & DPCD_INTERLANE_ALIGN_DONE); |
| |
| for (i = 0; i < edp_info->lane_cnt; i++) { |
| ret = exynos_dp_read_dpcd_adj_req(i, |
| &adj_req_sw, &adj_req_em); |
| if (ret != EXYNOS_DP_SUCCESS) { |
| printf("DP read adj req 1 failed\n"); |
| edp_info->lt_info.lt_status = DP_LT_FAIL; |
| |
| return ret; |
| } |
| |
| lt_ctl_val[i] = 0; |
| lt_ctl_val[i] = adj_req_em << 3 | adj_req_sw; |
| |
| if ((adj_req_sw == VOLTAGE_LEVEL_3) || |
| (adj_req_em == PRE_EMPHASIS_LEVEL_3)) { |
| lt_ctl_val[i] |= MAX_DRIVE_CURRENT_REACH_3; |
| lt_ctl_val[i] |= MAX_PRE_EMPHASIS_REACH_3; |
| } |
| } |
| |
| if (((lane_stat&DP_LANE_STAT_CE_DONE) && |
| (lane_stat&DP_LANE_STAT_SYM_LOCK)) |
| && (interlane_aligned == DPCD_INTERLANE_ALIGN_DONE)) { |
| debug("DP Equalizer training succeed\n"); |
| |
| f_bw = exynos_dp_get_link_bandwidth(); |
| f_lane_cnt = exynos_dp_get_lane_count(); |
| |
| debug("DP final BandWidth : %x\n", f_bw); |
| debug("DP final Lane Count : %x\n", f_lane_cnt); |
| |
| edp_info->lt_info.lt_status = DP_LT_FINISHED; |
| |
| exynos_dp_equalizer_err_link(edp_info); |
| |
| } else { |
| edp_info->lt_info.ep_loop++; |
| |
| if (edp_info->lt_info.ep_loop > MAX_EQ_LOOP) { |
| if (edp_info->lane_bw == DP_LANE_BW_2_70) { |
| ret = exynos_dp_reduce_link_rate( |
| edp_info); |
| } else { |
| edp_info->lt_info.lt_status = |
| DP_LT_FAIL; |
| exynos_dp_equalizer_err_link(edp_info); |
| } |
| } else { |
| for (i = 0; i < edp_info->lane_cnt; i++) |
| exynos_dp_set_lanex_pre_emphasis( |
| lt_ctl_val[i], i); |
| |
| ret = exynos_dp_write_bytes_to_dpcd( |
| DPCD_TRAINING_LANE0_SET, |
| 4, lt_ctl_val); |
| if (ret != EXYNOS_DP_SUCCESS) { |
| printf("DP set lt pattern failed\n"); |
| edp_info->lt_info.lt_status = |
| DP_LT_FAIL; |
| exynos_dp_equalizer_err_link(edp_info); |
| } |
| } |
| } |
| } else if (edp_info->lane_bw == DP_LANE_BW_2_70) { |
| ret = exynos_dp_reduce_link_rate(edp_info); |
| } else { |
| edp_info->lt_info.lt_status = DP_LT_FAIL; |
| exynos_dp_equalizer_err_link(edp_info); |
| } |
| |
| return ret; |
| } |
| |
| static unsigned int exynos_dp_sw_link_training(struct edp_device_info *edp_info) |
| { |
| unsigned int ret = 0; |
| int training_finished; |
| |
| /* Turn off unnecessary lane */ |
| if (edp_info->lane_cnt == 1) |
| exynos_dp_set_analog_power_down(CH1_BLOCK, 1); |
| |
| training_finished = 0; |
| |
| edp_info->lt_info.lt_status = DP_LT_START; |
| |
| /* Process here */ |
| while (!training_finished) { |
| switch (edp_info->lt_info.lt_status) { |
| case DP_LT_START: |
| ret = exynos_dp_link_start(edp_info); |
| if (ret != EXYNOS_DP_SUCCESS) { |
| printf("DP LT:link start failed\n"); |
| return ret; |
| } |
| break; |
| case DP_LT_CR: |
| ret = exynos_dp_process_clock_recovery(edp_info); |
| if (ret != EXYNOS_DP_SUCCESS) { |
| printf("DP LT:clock recovery failed\n"); |
| return ret; |
| } |
| break; |
| case DP_LT_ET: |
| ret = exynos_dp_process_equalizer_training(edp_info); |
| if (ret != EXYNOS_DP_SUCCESS) { |
| printf("DP LT:equalizer training failed\n"); |
| return ret; |
| } |
| break; |
| case DP_LT_FINISHED: |
| training_finished = 1; |
| break; |
| case DP_LT_FAIL: |
| return -1; |
| } |
| } |
| |
| return ret; |
| } |
| |
| static unsigned int exynos_dp_set_link_train(struct edp_device_info *edp_info) |
| { |
| unsigned int ret; |
| |
| exynos_dp_init_training(); |
| |
| ret = exynos_dp_sw_link_training(edp_info); |
| if (ret != EXYNOS_DP_SUCCESS) |
| printf("DP dp_sw_link_traning() failed\n"); |
| |
| return ret; |
| } |
| |
| static void exynos_dp_enable_scramble(unsigned int enable) |
| { |
| unsigned char data; |
| |
| if (enable) { |
| exynos_dp_enable_scrambling(DP_ENABLE); |
| |
| exynos_dp_read_byte_from_dpcd(DPCD_TRAINING_PATTERN_SET, |
| &data); |
| exynos_dp_write_byte_to_dpcd(DPCD_TRAINING_PATTERN_SET, |
| (u8)(data & ~DPCD_SCRAMBLING_DISABLED)); |
| } else { |
| exynos_dp_enable_scrambling(DP_DISABLE); |
| exynos_dp_read_byte_from_dpcd(DPCD_TRAINING_PATTERN_SET, |
| &data); |
| exynos_dp_write_byte_to_dpcd(DPCD_TRAINING_PATTERN_SET, |
| (u8)(data | DPCD_SCRAMBLING_DISABLED)); |
| } |
| } |
| |
| static unsigned int exynos_dp_config_video(struct edp_device_info *edp_info) |
| { |
| unsigned int ret = 0; |
| unsigned int retry_cnt; |
| |
| mdelay(1); |
| |
| if (edp_info->video_info.master_mode) { |
| printf("DP does not support master mode\n"); |
| return -ENODEV; |
| } else { |
| /* debug slave */ |
| exynos_dp_config_video_slave_mode(&edp_info->video_info); |
| } |
| |
| exynos_dp_set_video_color_format(&edp_info->video_info); |
| |
| if (edp_info->video_info.bist_mode) { |
| if (exynos_dp_config_video_bist(edp_info) != 0) |
| return -1; |
| } |
| |
| ret = exynos_dp_get_pll_lock_status(); |
| if (ret != PLL_LOCKED) { |
| printf("DP PLL is not locked yet\n"); |
| return -EIO; |
| } |
| |
| if (edp_info->video_info.master_mode == 0) { |
| retry_cnt = 10; |
| while (retry_cnt) { |
| ret = exynos_dp_is_slave_video_stream_clock_on(); |
| if (ret != EXYNOS_DP_SUCCESS) { |
| if (retry_cnt == 0) { |
| printf("DP stream_clock_on failed\n"); |
| return ret; |
| } |
| retry_cnt--; |
| mdelay(1); |
| } else |
| break; |
| } |
| } |
| |
| /* Set to use the register calculated M/N video */ |
| exynos_dp_set_video_cr_mn(CALCULATED_M, 0, 0); |
| |
| /* For video bist, Video timing must be generated by register */ |
| exynos_dp_set_video_timing_mode(VIDEO_TIMING_FROM_CAPTURE); |
| |
| /* Enable video bist */ |
| if (edp_info->video_info.bist_pattern != COLOR_RAMP && |
| edp_info->video_info.bist_pattern != BALCK_WHITE_V_LINES && |
| edp_info->video_info.bist_pattern != COLOR_SQUARE) |
| exynos_dp_enable_video_bist(edp_info->video_info.bist_mode); |
| else |
| exynos_dp_enable_video_bist(DP_DISABLE); |
| |
| /* Disable video mute */ |
| exynos_dp_enable_video_mute(DP_DISABLE); |
| |
| /* Configure video Master or Slave mode */ |
| exynos_dp_enable_video_master(edp_info->video_info.master_mode); |
| |
| /* Enable video */ |
| exynos_dp_start_video(); |
| |
| if (edp_info->video_info.master_mode == 0) { |
| retry_cnt = 100; |
| while (retry_cnt) { |
| ret = exynos_dp_is_video_stream_on(); |
| if (ret != EXYNOS_DP_SUCCESS) { |
| if (retry_cnt == 0) { |
| printf("DP Timeout of video stream\n"); |
| return ret; |
| } |
| retry_cnt--; |
| mdelay(5); |
| } else |
| break; |
| } |
| } |
| |
| return ret; |
| } |
| |
| unsigned int exynos_init_dp(void) |
| { |
| unsigned int ret; |
| struct edp_device_info *edp_info; |
| |
| edp_info = kzalloc(sizeof(struct edp_device_info), GFP_KERNEL); |
| if (!edp_info) { |
| debug("failed to allocate edp device object.\n"); |
| return -EFAULT; |
| } |
| |
| edp_info = dp_pd->edp_dev_info; |
| if (edp_info == NULL) { |
| debug("failed to get edp_info data.\n"); |
| return -EFAULT; |
| } |
| |
| exynos_dp_disp_info(&edp_info->disp_info); |
| |
| exynos_set_dp_phy(1); |
| |
| ret = exynos_dp_init_dp(); |
| if (ret != EXYNOS_DP_SUCCESS) { |
| printf("DP exynos_dp_init_dp() failed\n"); |
| return ret; |
| } |
| |
| ret = exynos_dp_handle_edid(edp_info); |
| if (ret != EXYNOS_DP_SUCCESS) { |
| printf("EDP handle_edid fail\n"); |
| return ret; |
| } |
| |
| ret = exynos_dp_set_link_train(edp_info); |
| if (ret != EXYNOS_DP_SUCCESS) { |
| printf("DP link training fail\n"); |
| return ret; |
| } |
| |
| exynos_dp_enable_scramble(DP_ENABLE); |
| exynos_dp_enable_rx_to_enhanced_mode(DP_ENABLE); |
| exynos_dp_enable_enhanced_mode(DP_ENABLE); |
| |
| exynos_dp_set_link_bandwidth(edp_info->lane_bw); |
| exynos_dp_set_lane_count(edp_info->lane_cnt); |
| |
| exynos_dp_init_video(); |
| ret = exynos_dp_config_video(edp_info); |
| if (ret != EXYNOS_DP_SUCCESS) { |
| printf("Exynos DP init failed\n"); |
| return ret; |
| } |
| |
| printf("Exynos DP init done\n"); |
| |
| return ret; |
| } |
| |
| void exynos_set_dp_platform_data(struct exynos_dp_platform_data *pd) |
| { |
| if (pd == NULL) { |
| debug("pd is NULL\n"); |
| return; |
| } |
| |
| dp_pd = pd; |
| } |