blob: 2d4b51316aef322031cac219bf7eeccc1e591d20 [file] [log] [blame]
#
# (C) Copyright 2000-2008
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundatio; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
VERSION = 1
PATCHLEVEL = 3
SUBLEVEL = 4
EXTRAVERSION =
U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
VERSION_FILE = $(obj)include/version_autogenerated.h
HOSTARCH := $(shell uname -m | \
sed -e s/i.86/i386/ \
-e s/sun4u/sparc64/ \
-e s/arm.*/arm/ \
-e s/sa110/arm/ \
-e s/powerpc/ppc/ \
-e s/ppc64/ppc/ \
-e s/macppc/ppc/)
HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
sed -e 's/\(cygwin\).*/cygwin/')
export HOSTARCH HOSTOS
# Deal with colliding definitions from tcsh etc.
VENDOR=
#########################################################################
# Allow for silent builds
ifeq (,$(findstring s,$(MAKEFLAGS)))
XECHO = echo
else
XECHO = :
endif
#########################################################################
#
# U-boot build supports producing a object files to the separate external
# directory. Two use cases are supported:
#
# 1) Add O= to the make command line
# 'make O=/tmp/build all'
#
# 2) Set environement variable BUILD_DIR to point to the desired location
# 'export BUILD_DIR=/tmp/build'
# 'make'
#
# The second approach can also be used with a MAKEALL script
# 'export BUILD_DIR=/tmp/build'
# './MAKEALL'
#
# Command line 'O=' setting overrides BUILD_DIR environent variable.
#
# When none of the above methods is used the local build is performed and
# the object files are placed in the source directory.
#
ifdef O
ifeq ("$(origin O)", "command line")
BUILD_DIR := $(O)
endif
endif
ifneq ($(BUILD_DIR),)
saved-output := $(BUILD_DIR)
# Attempt to create a output directory.
$(shell [ -d ${BUILD_DIR} ] || mkdir -p ${BUILD_DIR})
# Verify if it was successful.
BUILD_DIR := $(shell cd $(BUILD_DIR) && /bin/pwd)
$(if $(BUILD_DIR),,$(error output directory "$(saved-output)" does not exist))
endif # ifneq ($(BUILD_DIR),)
OBJTREE := $(if $(BUILD_DIR),$(BUILD_DIR),$(CURDIR))
SRCTREE := $(CURDIR)
TOPDIR := $(SRCTREE)
LNDIR := $(OBJTREE)
export TOPDIR SRCTREE OBJTREE
MKCONFIG := $(SRCTREE)/mkconfig
export MKCONFIG
ifneq ($(OBJTREE),$(SRCTREE))
REMOTE_BUILD := 1
export REMOTE_BUILD
endif
# $(obj) and (src) are defined in config.mk but here in main Makefile
# we also need them before config.mk is included which is the case for
# some targets like unconfig, clean, clobber, distclean, etc.
ifneq ($(OBJTREE),$(SRCTREE))
obj := $(OBJTREE)/
src := $(SRCTREE)/
else
obj :=
src :=
endif
export obj src
# Make sure CDPATH settings don't interfere
unexport CDPATH
#########################################################################
ifeq ($(ARCH),powerpc)
ARCH = ppc
endif
ifeq ($(obj)include/config.mk,$(wildcard $(obj)include/config.mk))
# load ARCH, BOARD, and CPU configuration
include $(obj)include/config.mk
export ARCH CPU BOARD VENDOR SOC
ifndef CROSS_COMPILE
ifeq ($(HOSTARCH),$(ARCH))
CROSS_COMPILE =
else
ifeq ($(ARCH),ppc)
CROSS_COMPILE = ppc_8xx-
endif
ifeq ($(ARCH),arm)
CROSS_COMPILE = arm-linux-
endif
ifeq ($(ARCH),i386)
CROSS_COMPILE = i386-linux-
endif
ifeq ($(ARCH),mips)
CROSS_COMPILE = mips_4KC-
endif
ifeq ($(ARCH),nios)
CROSS_COMPILE = nios-elf-
endif
ifeq ($(ARCH),nios2)
CROSS_COMPILE = nios2-elf-
endif
ifeq ($(ARCH),m68k)
CROSS_COMPILE = m68k-elf-
endif
ifeq ($(ARCH),microblaze)
CROSS_COMPILE = mb-
endif
ifeq ($(ARCH),blackfin)
CROSS_COMPILE = bfin-uclinux-
endif
ifeq ($(ARCH),avr32)
CROSS_COMPILE = avr32-linux-
endif
ifeq ($(ARCH),sh)
CROSS_COMPILE = sh4-linux-
endif
ifeq ($(ARCH),sparc)
CROSS_COMPILE = sparc-elf-
endif # sparc
endif # HOSTARCH,ARCH
endif # CROSS_COMPILE
export CROSS_COMPILE
# load other configuration
include $(TOPDIR)/config.mk
#########################################################################
# U-Boot objects....order is important (i.e. start must be first)
OBJS = cpu/$(CPU)/start.o
ifeq ($(CPU),i386)
OBJS += cpu/$(CPU)/start16.o
OBJS += cpu/$(CPU)/reset.o
endif
ifeq ($(CPU),ppc4xx)
OBJS += cpu/$(CPU)/resetvec.o
endif
ifeq ($(CPU),mpc85xx)
OBJS += cpu/$(CPU)/resetvec.o
endif
OBJS := $(addprefix $(obj),$(OBJS))
LIBS = lib_generic/libgeneric.a
LIBS += $(shell if [ -f board/$(VENDOR)/common/Makefile ]; then echo \
"board/$(VENDOR)/common/lib$(VENDOR).a"; fi)
LIBS += cpu/$(CPU)/lib$(CPU).a
ifdef SOC
LIBS += cpu/$(CPU)/$(SOC)/lib$(SOC).a
endif
ifeq ($(CPU),ixp)
LIBS += cpu/ixp/npe/libnpe.a
endif
LIBS += lib_$(ARCH)/lib$(ARCH).a
LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a \
fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a fs/yaffs2/libyaffs2.a
LIBS += net/libnet.a
LIBS += disk/libdisk.a
LIBS += drivers/bios_emulator/libatibiosemu.a
LIBS += drivers/block/libblock.a
LIBS += drivers/dma/libdma.a
LIBS += drivers/hwmon/libhwmon.a
LIBS += drivers/i2c/libi2c.a
LIBS += drivers/input/libinput.a
LIBS += drivers/misc/libmisc.a
LIBS += drivers/mmc/libmmc.a
LIBS += drivers/mtd/libmtd.a
LIBS += drivers/mtd/nand/libnand.a
LIBS += drivers/mtd/nand_legacy/libnand_legacy.a
LIBS += drivers/mtd/onenand/libonenand.a
LIBS += drivers/mtd/spi/libspi_flash.a
LIBS += drivers/net/libnet.a
LIBS += drivers/net/phy/libphy.a
LIBS += drivers/net/sk98lin/libsk98lin.a
LIBS += drivers/pci/libpci.a
LIBS += drivers/pcmcia/libpcmcia.a
LIBS += drivers/spi/libspi.a
ifeq ($(CPU),mpc83xx)
LIBS += drivers/qe/qe.a
endif
ifeq ($(CPU),mpc85xx)
LIBS += drivers/qe/qe.a
LIBS += cpu/mpc8xxx/ddr/libddr.a
endif
ifeq ($(CPU),mpc86xx)
LIBS += cpu/mpc8xxx/ddr/libddr.a
endif
LIBS += drivers/rtc/librtc.a
LIBS += drivers/serial/libserial.a
LIBS += drivers/usb/libusb.a
LIBS += drivers/video/libvideo.a
LIBS += common/libcommon.a
LIBS += libfdt/libfdt.a
LIBS += api/libapi.a
LIBS += post/libpost.a
LIBS := $(addprefix $(obj),$(LIBS))
.PHONY : $(LIBS) $(VERSION_FILE)
LIBBOARD = board/$(BOARDDIR)/lib$(BOARD).a
LIBBOARD := $(addprefix $(obj),$(LIBBOARD))
# Add GCC lib
PLATFORM_LIBS += -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc
# The "tools" are needed early, so put this first
# Don't include stuff already done in $(LIBS)
SUBDIRS = tools \
examples \
api_examples
.PHONY : $(SUBDIRS)
ifeq ($(CONFIG_NAND_U_BOOT),y)
NAND_SPL = nand_spl
U_BOOT_NAND = $(obj)u-boot-nand.bin
endif
ifeq ($(CONFIG_ONENAND_U_BOOT),y)
ONENAND_IPL = onenand_ipl
U_BOOT_ONENAND = $(obj)u-boot-onenand.bin
endif
__OBJS := $(subst $(obj),,$(OBJS))
__LIBS := $(subst $(obj),,$(LIBS)) $(subst $(obj),,$(LIBBOARD))
#########################################################################
#########################################################################
ALL += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map $(U_BOOT_NAND) $(U_BOOT_ONENAND)
ifeq ($(ARCH),blackfin)
ALL += $(obj)u-boot.ldr
endif
all: $(ALL)
$(obj)u-boot.hex: $(obj)u-boot
$(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@
$(obj)u-boot.srec: $(obj)u-boot
$(OBJCOPY) ${OBJCFLAGS} -O srec $< $@
$(obj)u-boot.bin: $(obj)u-boot
$(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
$(obj)u-boot.ldr: $(obj)u-boot
$(LDR) -T $(CONFIG_BFIN_CPU) -f -c $@ $< $(LDR_FLAGS)
$(obj)u-boot.ldr.hex: $(obj)u-boot.ldr
$(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ -I binary
$(obj)u-boot.ldr.srec: $(obj)u-boot.ldr
$(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ -I binary
$(obj)u-boot.img: $(obj)u-boot.bin
./tools/mkimage -A $(ARCH) -T firmware -C none \
-a $(TEXT_BASE) -e 0 \
-n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \
sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \
-d $< $@
$(obj)u-boot.sha1: $(obj)u-boot.bin
$(obj)tools/ubsha1 $(obj)u-boot.bin
$(obj)u-boot.dis: $(obj)u-boot
$(OBJDUMP) -d $< > $@
$(obj)u-boot: depend $(SUBDIRS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT)
UNDEF_SYM=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \
sed -n -e 's/.*\($(SYM_PREFIX)__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \
--start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \
-Map u-boot.map -o u-boot
$(OBJS): depend $(obj)include/autoconf.mk
$(MAKE) -C cpu/$(CPU) $(if $(REMOTE_BUILD),$@,$(notdir $@))
$(LIBS): depend $(obj)include/autoconf.mk
$(MAKE) -C $(dir $(subst $(obj),,$@))
$(LIBBOARD): depend $(LIBS) $(obj)include/autoconf.mk
$(MAKE) -C $(dir $(subst $(obj),,$@))
$(SUBDIRS): depend $(obj)include/autoconf.mk
$(MAKE) -C $@ all
$(LDSCRIPT): depend $(obj)include/autoconf.mk
$(MAKE) -C $(dir $@) $(notdir $@)
$(NAND_SPL): $(VERSION_FILE) $(obj)include/autoconf.mk
$(MAKE) -C nand_spl/board/$(BOARDDIR) all
$(U_BOOT_NAND): $(NAND_SPL) $(obj)u-boot.bin $(obj)include/autoconf.mk
cat $(obj)nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin
$(ONENAND_IPL): $(VERSION_FILE) $(obj)include/autoconf.mk
$(MAKE) -C onenand_ipl/board/$(BOARDDIR) all
$(U_BOOT_ONENAND): $(ONENAND_IPL) $(obj)u-boot.bin $(obj)include/autoconf.mk
cat $(obj)onenand_ipl/onenand-ipl-2k.bin $(obj)u-boot.bin > $(obj)u-boot-onenand.bin
cat $(obj)onenand_ipl/onenand-ipl-4k.bin $(obj)u-boot.bin > $(obj)u-boot-flexonenand.bin
$(VERSION_FILE):
@( printf '#define U_BOOT_VERSION "U-Boot %s%s"\n' "$(U_BOOT_VERSION)" \
'$(shell $(CONFIG_SHELL) $(TOPDIR)/tools/setlocalversion $(TOPDIR))' \
) > $@.tmp
@cmp -s $@ $@.tmp && rm -f $@.tmp || mv -f $@.tmp $@
gdbtools:
$(MAKE) -C tools/gdb all || exit 1
updater:
$(MAKE) -C tools/updater all || exit 1
env:
$(MAKE) -C tools/env all MTD_VERSION=${MTD_VERSION} || exit 1
depend dep: $(VERSION_FILE)
for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir _depend ; done
TAG_SUBDIRS += include
TAG_SUBDIRS += lib_generic board/$(BOARDDIR)
TAG_SUBDIRS += cpu/$(CPU)
TAG_SUBDIRS += lib_$(ARCH)
TAG_SUBDIRS += fs/cramfs
TAG_SUBDIRS += fs/fat
TAG_SUBDIRS += fs/fdos
TAG_SUBDIRS += fs/jffs2
TAG_SUBDIRS += fs/yaffs2
TAG_SUBDIRS += net
TAG_SUBDIRS += disk
TAG_SUBDIRS += common
TAG_SUBDIRS += drivers/bios_emulator
TAG_SUBDIRS += drivers/block
TAG_SUBDIRS += drivers/hwmon
TAG_SUBDIRS += drivers/i2c
TAG_SUBDIRS += drivers/input
TAG_SUBDIRS += drivers/misc
TAG_SUBDIRS += drivers/mmc
TAG_SUBDIRS += drivers/mtd
TAG_SUBDIRS += drivers/mtd/nand
TAG_SUBDIRS += drivers/mtd/nand_legacy
TAG_SUBDIRS += drivers/mtd/onenand
TAG_SUBDIRS += drivers/mtd/spi
TAG_SUBDIRS += drivers/net
TAG_SUBDIRS += drivers/net/sk98lin
TAG_SUBDIRS += drivers/pci
TAG_SUBDIRS += drivers/pcmcia
TAG_SUBDIRS += drivers/qe
TAG_SUBDIRS += drivers/rtc
TAG_SUBDIRS += drivers/serial
TAG_SUBDIRS += drivers/spi
TAG_SUBDIRS += drivers/usb
TAG_SUBDIRS += drivers/video
tags ctags:
ctags -w -o $(obj)ctags `find $(SUBDIRS) $(TAG_SUBDIRS) \
-name '*.[ch]' -print`
etags:
etags -a -o $(obj)etags `find $(SUBDIRS) $(TAG_SUBDIRS) \
-name '*.[ch]' -print`
cscope:
find $(SUBDIRS) $(TAG_SUBDIRS) -name '*.[ch]' -print \
> cscope.files
cscope -b -q -k
$(obj)System.map: $(obj)u-boot
@$(NM) $< | \
grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
sort > $(obj)System.map
#
# Auto-generate the autoconf.mk file (which is included by all makefiles)
#
# This target actually generates 2 files; autoconf.mk and autoconf.mk.dep.
# the dep file is only include in this top level makefile to determine when
# to regenerate the autoconf.mk file.
$(obj)include/autoconf.mk.dep: $(obj)include/config.h include/common.h
@$(XECHO) Generating $@ ; \
set -e ; \
: Generate the dependancies ; \
$(CC) -x c -DDO_DEPS_ONLY -M $(HOST_CFLAGS) $(CPPFLAGS) \
-MQ $(obj)include/autoconf.mk include/common.h > $@
$(obj)include/autoconf.mk: $(obj)include/config.h
@$(XECHO) Generating $@ ; \
set -e ; \
: Extract the config macros ; \
$(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h | \
sed -n -f tools/scripts/define2mk.sed > $@
sinclude $(obj)include/autoconf.mk.dep
#########################################################################
else # !config.mk
all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin \
$(obj)u-boot.img $(obj)u-boot.dis $(obj)u-boot \
$(SUBDIRS) $(VERSION_FILE) gdbtools updater env depend \
dep tags ctags etags cscope $(obj)System.map:
@echo "System not configured - see README" >&2
@ exit 1
endif # config.mk
.PHONY : CHANGELOG
CHANGELOG:
git log --no-merges U-Boot-1_1_5.. | \
unexpand -a | sed -e 's/\s\s*$$//' > $@
include/license.h: tools/bin2header COPYING
cat COPYING | gzip -9 -c | ./tools/bin2header license_gzip > include/license.h
#########################################################################
unconfig:
@rm -f $(obj)include/config.h $(obj)include/config.mk \
$(obj)board/*/config.tmp $(obj)board/*/*/config.tmp \
$(obj)include/autoconf.mk $(obj)include/autoconf.mk.dep
#========================================================================
# PowerPC
#========================================================================
#########################################################################
## MPC5xx Systems
#########################################################################
canmb_config: unconfig
@$(MKCONFIG) -a canmb ppc mpc5xxx canmb
cmi_mpc5xx_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc5xx cmi
PATI_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc5xx pati mpl
#########################################################################
## MPC5xxx Systems
#########################################################################
aev_config: unconfig
@$(MKCONFIG) -a aev ppc mpc5xxx tqm5200 tqc
BC3450_config: unconfig
@$(MKCONFIG) -a BC3450 ppc mpc5xxx bc3450
cm5200_config: unconfig
@$(MKCONFIG) -a cm5200 ppc mpc5xxx cm5200
cpci5200_config: unconfig
@$(MKCONFIG) -a cpci5200 ppc mpc5xxx cpci5200 esd
hmi1001_config: unconfig
@$(MKCONFIG) hmi1001 ppc mpc5xxx hmi1001
Lite5200_config \
Lite5200_LOWBOOT_config \
Lite5200_LOWBOOT08_config \
icecube_5200_config \
icecube_5200_LOWBOOT_config \
icecube_5200_LOWBOOT08_config \
icecube_5200_DDR_config \
icecube_5200_DDR_LOWBOOT_config \
icecube_5200_DDR_LOWBOOT08_config \
icecube_5100_config: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/icecube
@[ -z "$(findstring LOWBOOT_,$@)" ] || \
{ if [ "$(findstring DDR,$@)" ] ; \
then echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \
else echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \
fi ; \
$(XECHO) "... with LOWBOOT configuration" ; \
}
@[ -z "$(findstring LOWBOOT08,$@)" ] || \
{ echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \
echo "... with 8 MB flash only" ; \
$(XECHO) "... with LOWBOOT configuration" ; \
}
@[ -z "$(findstring DDR,$@)" ] || \
{ echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h ; \
$(XECHO) "... DDR memory revision" ; \
}
@[ -z "$(findstring 5200,$@)" ] || \
{ echo "#define CONFIG_MPC5200" >>$(obj)include/config.h ; \
$(XECHO) "... with MPC5200 processor" ; \
}
@[ -z "$(findstring 5100,$@)" ] || \
{ echo "#define CONFIG_MGT5100" >>$(obj)include/config.h ; \
$(XECHO) "... with MGT5100 processor" ; \
}
@$(MKCONFIG) -a IceCube ppc mpc5xxx icecube
jupiter_config: unconfig
@$(MKCONFIG) jupiter ppc mpc5xxx jupiter
inka4x0_config: unconfig
@$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0
lite5200b_config \
lite5200b_PM_config \
lite5200b_LOWBOOT_config: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/icecube
@ echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h
@ $(XECHO) "... DDR memory revision"
@ echo "#define CONFIG_MPC5200" >>$(obj)include/config.h
@ echo "#define CONFIG_LITE5200B" >>$(obj)include/config.h
@[ -z "$(findstring _PM_,$@)" ] || \
{ echo "#define CONFIG_LITE5200B_PM" >>$(obj)include/config.h ; \
$(XECHO) "... with power management (low-power mode) support" ; \
}
@[ -z "$(findstring LOWBOOT_,$@)" ] || \
{ echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \
$(XECHO) "... with LOWBOOT configuration" ; \
}
@ $(XECHO) "... with MPC5200B processor"
@$(MKCONFIG) -a IceCube ppc mpc5xxx icecube
mcc200_config \
mcc200_SDRAM_config \
mcc200_highboot_config \
mcc200_COM12_config \
mcc200_COM12_SDRAM_config \
mcc200_COM12_highboot_config \
mcc200_COM12_highboot_SDRAM_config \
mcc200_highboot_SDRAM_config \
prs200_config \
prs200_DDR_config \
prs200_highboot_config \
prs200_highboot_DDR_config: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/mcc200
@[ -n "$(findstring highboot,$@)" ] || \
{ $(XECHO) "... with lowboot configuration" ; \
}
@[ -z "$(findstring highboot,$@)" ] || \
{ echo "TEXT_BASE = 0xFFF00000" >$(obj)board/mcc200/config.tmp ; \
$(XECHO) "... with highboot configuration" ; \
}
@[ -n "$(findstring _SDRAM,$@)" ] || \
{ if [ -n "$(findstring mcc200,$@)" ]; \
then \
$(XECHO) "... with DDR" ; \
else \
if [ -n "$(findstring _DDR,$@)" ];\
then \
$(XECHO) "... with DDR" ; \
else \
echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ;\
$(XECHO) "... with SDRAM" ; \
fi; \
fi; \
}
@[ -z "$(findstring _SDRAM,$@)" ] || \
{ echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ; \
$(XECHO) "... with SDRAM" ; \
}
@[ -z "$(findstring COM12,$@)" ] || \
{ echo "#define CONFIG_CONSOLE_COM12" >>$(obj)include/config.h ; \
$(XECHO) "... with console on COM12" ; \
}
@[ -z "$(findstring prs200,$@)" ] || \
{ echo "#define CONFIG_PRS200" >>$(obj)include/config.h ;\
}
@$(MKCONFIG) -n $@ -a mcc200 ppc mpc5xxx mcc200
mecp5200_config: unconfig
@$(MKCONFIG) mecp5200 ppc mpc5xxx mecp5200 esd
motionpro_config: unconfig
@$(MKCONFIG) motionpro ppc mpc5xxx motionpro
mucmc52_config: unconfig
@$(MKCONFIG) mucmc52 ppc mpc5xxx mucmc52
munices_config: unconfig
@$(MKCONFIG) munices ppc mpc5xxx munices
MVBC_P_config: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/mvbc_p
@ >$(obj)include/config.h
@[ -z "$(findstring MVBC_P,$@)" ] || \
{ echo "#define CONFIG_MVBC_P" >>$(obj)include/config.h; }
@$(MKCONFIG) -n $@ -a MVBC_P ppc mpc5xxx mvbc_p matrix_vision
o2dnt_config: unconfig
@$(MKCONFIG) o2dnt ppc mpc5xxx o2dnt
pf5200_config: unconfig
@$(MKCONFIG) pf5200 ppc mpc5xxx pf5200 esd
PM520_config \
PM520_DDR_config \
PM520_ROMBOOT_config \
PM520_ROMBOOT_DDR_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring DDR,$@)" ] || \
{ echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h ; \
$(XECHO) "... DDR memory revision" ; \
}
@[ -z "$(findstring ROMBOOT,$@)" ] || \
{ echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
$(XECHO) "... booting from 8-bit flash" ; \
}
@$(MKCONFIG) -a PM520 ppc mpc5xxx pm520
smmaco4_config: unconfig
@$(MKCONFIG) -a smmaco4 ppc mpc5xxx tqm5200 tqc
spieval_config: unconfig
@$(MKCONFIG) -a spieval ppc mpc5xxx tqm5200 tqc
TB5200_B_config \
TB5200_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring _B,$@)" ] || \
{ echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \
$(XECHO) "... with MPC5200B processor" ; \
}
@$(MKCONFIG) -n $@ -a TB5200 ppc mpc5xxx tqm5200 tqc
MINI5200_config \
EVAL5200_config \
TOP5200_config: unconfig
@mkdir -p $(obj)include
@ echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
@$(MKCONFIG) -n $@ -a TOP5200 ppc mpc5xxx top5200 emk
Total5100_config \
Total5200_config \
Total5200_lowboot_config \
Total5200_Rev2_config \
Total5200_Rev2_lowboot_config: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/total5200
@[ -z "$(findstring 5100,$@)" ] || \
{ echo "#define CONFIG_MGT5100" >>$(obj)include/config.h ; \
$(XECHO) "... with MGT5100 processor" ; \
}
@[ -z "$(findstring 5200,$@)" ] || \
{ echo "#define CONFIG_MPC5200" >>$(obj)include/config.h ; \
$(XECHO) "... with MPC5200 processor" ; \
}
@[ -n "$(findstring Rev,$@)" ] || \
{ echo "#define CONFIG_TOTAL5200_REV 1" >>$(obj)include/config.h ; \
$(XECHO) "... revision 1 board" ; \
}
@[ -z "$(findstring Rev2_,$@)" ] || \
{ echo "#define CONFIG_TOTAL5200_REV 2" >>$(obj)include/config.h ; \
$(XECHO) "... revision 2 board" ; \
}
@[ -z "$(findstring lowboot_,$@)" ] || \
{ echo "TEXT_BASE = 0xFE000000" >$(obj)board/total5200/config.tmp ; \
$(XECHO) "... with lowboot configuration" ; \
}
@$(MKCONFIG) -a Total5200 ppc mpc5xxx total5200
cam5200_config \
cam5200_niosflash_config \
fo300_config \
MiniFAP_config \
TQM5200S_config \
TQM5200S_HIGHBOOT_config \
TQM5200_B_config \
TQM5200_B_HIGHBOOT_config \
TQM5200_config \
TQM5200_STK100_config: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/tqc/tqm5200
@[ -z "$(findstring cam5200,$@)" ] || \
{ echo "#define CONFIG_CAM5200" >>$(obj)include/config.h ; \
echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \
echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \
$(XECHO) "... TQM5200S on Cam5200" ; \
}
@[ -z "$(findstring niosflash,$@)" ] || \
{ echo "#define CONFIG_CAM5200_NIOSFLASH" >>$(obj)include/config.h ; \
$(XECHO) "... with NIOS flash driver" ; \
}
@[ -z "$(findstring fo300,$@)" ] || \
{ echo "#define CONFIG_FO300" >>$(obj)include/config.h ; \
$(XECHO) "... TQM5200 on FO300" ; \
}
@[ -z "$(findstring MiniFAP,$@)" ] || \
{ echo "#define CONFIG_MINIFAP" >>$(obj)include/config.h ; \
$(XECHO) "... TQM5200_AC on MiniFAP" ; \
}
@[ -z "$(findstring STK100,$@)" ] || \
{ echo "#define CONFIG_STK52XX_REV100" >>$(obj)include/config.h ; \
$(XECHO) "... on a STK52XX.100 base board" ; \
}
@[ -z "$(findstring TQM5200_B,$@)" ] || \
{ echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring TQM5200S,$@)" ] || \
{ echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \
echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring HIGHBOOT,$@)" ] || \
{ echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp ; \
}
@$(MKCONFIG) -n $@ -a TQM5200 ppc mpc5xxx tqm5200 tqc
uc101_config: unconfig
@$(MKCONFIG) uc101 ppc mpc5xxx uc101
v38b_config: unconfig
@$(MKCONFIG) -a v38b ppc mpc5xxx v38b
#########################################################################
## MPC512x Systems
#########################################################################
ads5121_config \
ads5121_rev2_config \
: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring rev2,$@)" ] ; then \
echo "#define CONFIG_ADS5121_REV2 1" > $(obj)include/config.h; \
fi
@$(MKCONFIG) -a ads5121 ppc mpc512x ads5121
#########################################################################
## MPC8xx Systems
#########################################################################
Adder_config \
Adder87x_config \
AdderII_config \
: unconfig
@mkdir -p $(obj)include
$(if $(findstring AdderII,$@), \
@echo "#define CONFIG_MPC852T" > $(obj)include/config.h)
@$(MKCONFIG) -a Adder ppc mpc8xx adder
AdderUSB_config: unconfig
@$(MKCONFIG) -a AdderUSB ppc mpc8xx adder
ADS860_config \
FADS823_config \
FADS850SAR_config \
MPC86xADS_config \
MPC885ADS_config \
FADS860T_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx fads
AMX860_config : unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx amx860 westel
c2mon_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx c2mon
CCM_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx CCM siemens
cogent_mpc8xx_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx cogent
ELPT860_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx elpt860 LEOX
EP88x_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx ep88x
ESTEEM192E_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx esteem192e
ETX094_config : unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx etx094
FLAGADM_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx flagadm
xtract_GEN860T = $(subst _SC,,$(subst _config,,$1))
GEN860T_SC_config \
GEN860T_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring _SC,$@)" ] || \
{ echo "#define CONFIG_SC" >>$(obj)include/config.h ; \
$(XECHO) "With reduced H/W feature set (SC)..." ; \
}
@$(MKCONFIG) -a $(call xtract_GEN860T,$@) ppc mpc8xx gen860t
GENIETV_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx genietv
GTH_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx gth
hermes_config : unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx hermes
HMI10_config : unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx tqc
IAD210_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx IAD210 siemens
xtract_ICU862 = $(subst _100MHz,,$(subst _config,,$1))
ICU862_100MHz_config \
ICU862_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring _100MHz,$@)" ] || \
{ echo "#define CONFIG_100MHz" >>$(obj)include/config.h ; \
$(XECHO) "... with 100MHz system clock" ; \
}
@$(MKCONFIG) -a $(call xtract_ICU862,$@) ppc mpc8xx icu862
IP860_config : unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx ip860
IVML24_256_config \
IVML24_128_config \
IVML24_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring IVML24_config,$@)" ] || \
{ echo "#define CONFIG_IVML24_16M" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring IVML24_128_config,$@)" ] || \
{ echo "#define CONFIG_IVML24_32M" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring IVML24_256_config,$@)" ] || \
{ echo "#define CONFIG_IVML24_64M" >>$(obj)include/config.h ; \
}
@$(MKCONFIG) -a IVML24 ppc mpc8xx ivm
IVMS8_256_config \
IVMS8_128_config \
IVMS8_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring IVMS8_config,$@)" ] || \
{ echo "#define CONFIG_IVMS8_16M" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring IVMS8_128_config,$@)" ] || \
{ echo "#define CONFIG_IVMS8_32M" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring IVMS8_256_config,$@)" ] || \
{ echo "#define CONFIG_IVMS8_64M" >>$(obj)include/config.h ; \
}
@$(MKCONFIG) -a IVMS8 ppc mpc8xx ivm
KUP4K_config : unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4k kup
KUP4X_config : unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4x kup
LANTEC_config : unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx lantec
lwmon_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx lwmon
MBX_config \
MBX860T_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx mbx8xx
mgsuvd_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx mgsuvd
MHPC_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx mhpc eltec
xtract_NETVIA = $(subst _V2,,$(subst _config,,$1))
NETVIA_V2_config \
NETVIA_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring NETVIA_config,$@)" ] || \
{ echo "#define CONFIG_NETVIA_VERSION 1" >>$(obj)include/config.h ; \
$(XECHO) "... Version 1" ; \
}
@[ -z "$(findstring NETVIA_V2_config,$@)" ] || \
{ echo "#define CONFIG_NETVIA_VERSION 2" >>$(obj)include/config.h ; \
$(XECHO) "... Version 2" ; \
}
@$(MKCONFIG) -a $(call xtract_NETVIA,$@) ppc mpc8xx netvia
xtract_NETPHONE = $(subst _V2,,$(subst _config,,$1))
NETPHONE_V2_config \
NETPHONE_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring NETPHONE_config,$@)" ] || \
{ echo "#define CONFIG_NETPHONE_VERSION 1" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring NETPHONE_V2_config,$@)" ] || \
{ echo "#define CONFIG_NETPHONE_VERSION 2" >>$(obj)include/config.h ; \
}
@$(MKCONFIG) -a $(call xtract_NETPHONE,$@) ppc mpc8xx netphone
xtract_NETTA = $(subst _SWAPHOOK,,$(subst _6412,,$(subst _ISDN,,$(subst _config,,$1))))
NETTA_ISDN_6412_SWAPHOOK_config \
NETTA_ISDN_SWAPHOOK_config \
NETTA_6412_SWAPHOOK_config \
NETTA_SWAPHOOK_config \
NETTA_ISDN_6412_config \
NETTA_ISDN_config \
NETTA_6412_config \
NETTA_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring ISDN_,$@)" ] || \
{ echo "#define CONFIG_NETTA_ISDN 1" >>$(obj)include/config.h ; \
}
@[ -n "$(findstring ISDN_,$@)" ] || \
{ echo "#undef CONFIG_NETTA_ISDN" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring 6412_,$@)" ] || \
{ echo "#define CONFIG_NETTA_6412 1" >>$(obj)include/config.h ; \
}
@[ -n "$(findstring 6412_,$@)" ] || \
{ echo "#undef CONFIG_NETTA_6412" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring SWAPHOOK_,$@)" ] || \
{ echo "#define CONFIG_NETTA_SWAPHOOK 1" >>$(obj)include/config.h ; \
}
@[ -n "$(findstring SWAPHOOK_,$@)" ] || \
{ echo "#undef CONFIG_NETTA_SWAPHOOK" >>$(obj)include/config.h ; \
}
@$(MKCONFIG) -a $(call xtract_NETTA,$@) ppc mpc8xx netta
xtract_NETTA2 = $(subst _V2,,$(subst _config,,$1))
NETTA2_V2_config \
NETTA2_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring NETTA2_config,$@)" ] || \
{ echo "#define CONFIG_NETTA2_VERSION 1" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring NETTA2_V2_config,$@)" ] || \
{ echo "#define CONFIG_NETTA2_VERSION 2" >>$(obj)include/config.h ; \
}
@$(MKCONFIG) -a $(call xtract_NETTA2,$@) ppc mpc8xx netta2
NC650_Rev1_config \
NC650_Rev2_config \
CP850_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring CP850,$@)" ] || \
{ echo "#define CONFIG_CP850 1" >>$(obj)include/config.h ; \
echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring Rev1,$@)" ] || \
{ echo "#define CONFIG_IDS852_REV1 1" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring Rev2,$@)" ] || \
{ echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \
}
@$(MKCONFIG) -a NC650 ppc mpc8xx nc650
NX823_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx nx823
pcu_e_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx pcu_e siemens
QS850_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmc
QS823_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmc
QS860T_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx qs860t snmc
quantum_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx quantum
R360MPI_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx r360mpi
RBC823_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx rbc823
RPXClassic_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXClassic
RPXlite_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXlite
RPXlite_DW_64_config \
RPXlite_DW_LCD_config \
RPXlite_DW_64_LCD_config \
RPXlite_DW_NVRAM_config \
RPXlite_DW_NVRAM_64_config \
RPXlite_DW_NVRAM_LCD_config \
RPXlite_DW_NVRAM_64_LCD_config \
RPXlite_DW_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring _64,$@)" ] || \
{ echo "#define RPXlite_64MHz" >>$(obj)include/config.h ; \
$(XECHO) "... with 64MHz system clock ..."; \
}
@[ -z "$(findstring _LCD,$@)" ] || \
{ echo "#define CONFIG_LCD" >>$(obj)include/config.h ; \
echo "#define CONFIG_NEC_NL6448BC20" >>$(obj)include/config.h ; \
$(XECHO) "... with LCD display ..."; \
}
@[ -z "$(findstring _NVRAM,$@)" ] || \
{ echo "#define CFG_ENV_IS_IN_NVRAM" >>$(obj)include/config.h ; \
$(XECHO) "... with ENV in NVRAM ..."; \
}
@$(MKCONFIG) -a RPXlite_DW ppc mpc8xx RPXlite_dw
rmu_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx rmu
RRvision_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx RRvision
RRvision_LCD_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_LCD" >$(obj)include/config.h
@echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h
@$(MKCONFIG) -a RRvision ppc mpc8xx RRvision
SM850_config : unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx tqc
spc1920_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx spc1920
SPD823TS_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx spd8xx
stxxtc_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx stxxtc
svm_sc8xx_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx svm_sc8xx
SXNI855T_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx sixnet
# EMK MPC8xx based modules
TOP860_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx top860 emk
# Play some tricks for configuration selection
# Only 855 and 860 boards may come with FEC
# and only 823 boards may have LCD support
xtract_8xx = $(subst _LCD,,$(subst _config,,$1))
FPS850L_config \
FPS860L_config \
NSCU_config \
TQM823L_config \
TQM823L_LCD_config \
TQM850L_config \
TQM855L_config \
TQM860L_config \
TQM862L_config \
TQM823M_config \
TQM850M_config \
TQM855M_config \
TQM860M_config \
TQM862M_config \
TQM866M_config \
TQM885D_config \
TK885D_config \
virtlab2_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring _LCD,$@)" ] || \
{ echo "#define CONFIG_LCD" >>$(obj)include/config.h ; \
echo "#define CONFIG_NEC_NL6448BC20" >>$(obj)include/config.h ; \
$(XECHO) "... with LCD display" ; \
}
@$(MKCONFIG) -a $(call xtract_8xx,$@) ppc mpc8xx tqm8xx tqc
TTTech_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_LCD" >$(obj)include/config.h
@echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h
@$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx tqc
uc100_config : unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx uc100
v37_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_LCD" >$(obj)include/config.h
@echo "#define CONFIG_SHARP_LQ084V1DG21" >>$(obj)include/config.h
@$(MKCONFIG) $(@:_config=) ppc mpc8xx v37
wtk_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_LCD" >$(obj)include/config.h
@echo "#define CONFIG_SHARP_LQ065T9DR51U" >>$(obj)include/config.h
@$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx tqc
#########################################################################
## PPC4xx Systems
#########################################################################
xtract_4xx = $(subst _25,,$(subst _33,,$(subst _BA,,$(subst _ME,,$(subst _HI,,$(subst _config,,$1))))))
acadia_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx acadia amcc
acadia_nand_config: unconfig
@mkdir -p $(obj)include $(obj)board/amcc/acadia
@mkdir -p $(obj)nand_spl/board/amcc/acadia
@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
@$(MKCONFIG) -n $@ -a acadia ppc ppc4xx acadia amcc
@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/acadia/config.tmp
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
ADCIOP_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx adciop esd
alpr_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx alpr prodrive
AP1000_config:unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx ap1000 amirix
APC405_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx apc405 esd
AR405_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx ar405 esd
ASH405_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx ash405 esd
bamboo_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx bamboo amcc
bamboo_nand_config: unconfig
@mkdir -p $(obj)include $(obj)board/amcc/bamboo
@mkdir -p $(obj)nand_spl/board/amcc/bamboo
@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
@$(MKCONFIG) -n $@ -a bamboo ppc ppc4xx bamboo amcc
@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/bamboo/config.tmp
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
bubinga_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx bubinga amcc
CANBT_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx canbt esd
# Canyonlands & Glacier use different U-Boot images
canyonlands_config \
glacier_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
@$(MKCONFIG) -n $@ -a canyonlands ppc ppc4xx canyonlands amcc
canyonlands_nand_config \
glacier_nand_config: unconfig
@mkdir -p $(obj)include $(obj)board/amcc/canyonlands
@mkdir -p $(obj)nand_spl/board/amcc/canyonlands
@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
@echo "#define CONFIG_$$(echo $(subst ,,$(@:_nand_config=)) | \
tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
@$(MKCONFIG) -n $@ -a canyonlands ppc ppc4xx canyonlands amcc
@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/canyonlands/config.tmp
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
CATcenter_config \
CATcenter_25_config \
CATcenter_33_config: unconfig
@mkdir -p $(obj)include
@ echo "/* CATcenter uses PPChameleon Model ME */" > $(obj)include/config.h
@ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> $(obj)include/config.h
@[ -z "$(findstring _25,$@)" ] || \
{ echo "#define CONFIG_PPCHAMELEON_CLK_25" >> $(obj)include/config.h ; \
$(XECHO) "SysClk = 25MHz" ; \
}
@[ -z "$(findstring _33,$@)" ] || \
{ echo "#define CONFIG_PPCHAMELEON_CLK_33" >> $(obj)include/config.h ; \
$(XECHO) "SysClk = 33MHz" ; \
}
@$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
CMS700_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx cms700 esd
CPCI2DP_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci2dp esd
CPCI405_config \
CPCI4052_config \
CPCI405DT_config \
CPCI405AB_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd
@echo "BOARD_REVISION = $(@:_config=)" >> $(obj)include/config.mk
CPCIISER4_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx cpciiser4 esd
CRAYL1_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx L1 cray
csb272_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx csb272
csb472_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx csb472
DASA_SIM_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx dasa_sim esd
DP405_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx dp405 esd
DU405_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx du405 esd
DU440_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx du440 esd
ebony_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx ebony amcc
ERIC_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx eric
EXBITGEN_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx exbitgen
G2000_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx g2000
hcu4_config: unconfig
@mkdir -p $(obj)board/netstal/common
@$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu4 netstal
hcu5_config: unconfig
@mkdir -p $(obj)board/netstal/common
@$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu5 netstal
HH405_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx hh405 esd
HUB405_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx hub405 esd
JSE_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx jse
KAREF_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx karef sandburst
katmai_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx katmai amcc
# Kilauea & Haleakala images are identical (recognized via PVR)
kilauea_config \
haleakala_config: unconfig
@$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcc
kilauea_nand_config \
haleakala_nand_config: unconfig
@mkdir -p $(obj)include $(obj)board/amcc/kilauea
@mkdir -p $(obj)nand_spl/board/amcc/kilauea
@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
@$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcc
@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/kilauea/config.tmp
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
korat_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx korat
luan_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx luan amcc
lwmon5_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx lwmon5
makalu_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx makalu amcc
mcu25_config: unconfig
@mkdir -p $(obj)board/netstal/common
@$(MKCONFIG) $(@:_config=) ppc ppc4xx mcu25 netstal
METROBOX_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx metrobox sandburst
MIP405_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx mip405 mpl
MIP405T_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_MIP405T" >$(obj)include/config.h
@$(XECHO) "Enable subset config for MIP405T"
@$(MKCONFIG) -a MIP405 ppc ppc4xx mip405 mpl
ML2_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx ml2
ml300_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx ml300 xilinx
ml507_flash_config: unconfig
@mkdir -p $(obj)include $(obj)board/xilinx/ml507
@cp $(obj)board/xilinx/ml507/u-boot-rom.lds $(obj)board/xilinx/ml507/u-boot.lds
@echo "TEXT_BASE = 0xFE360000" > $(obj)board/xilinx/ml507/config.tmp
@$(MKCONFIG) $(@:_flash_config=) ppc ppc4xx ml507 xilinx
ml507_config: unconfig
@mkdir -p $(obj)include $(obj)board/xilinx/ml507
@cp $(obj)board/xilinx/ml507/u-boot-ram.lds $(obj)board/xilinx/ml507/u-boot.lds
@$(MKCONFIG) $(@:_config=) ppc ppc4xx ml507 xilinx
ocotea_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx ocotea amcc
OCRTC_config \
ORSG_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx ocrtc esd
p3p440_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx p3p440 prodrive
PCI405_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx pci405 esd
pcs440ep_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx pcs440ep
PIP405_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx pip405 mpl
PLU405_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx plu405 esd
PMC405_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc405 esd
PMC440_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc440 esd
PPChameleonEVB_config \
PPChameleonEVB_BA_25_config \
PPChameleonEVB_ME_25_config \
PPChameleonEVB_HI_25_config \
PPChameleonEVB_BA_33_config \
PPChameleonEVB_ME_33_config \
PPChameleonEVB_HI_33_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring EVB_BA,$@)" ] || \
{ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>$(obj)include/config.h ; \
$(XECHO) "... BASIC model" ; \
}
@[ -z "$(findstring EVB_ME,$@)" ] || \
{ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>$(obj)include/config.h ; \
$(XECHO) "... MEDIUM model" ; \
}
@[ -z "$(findstring EVB_HI,$@)" ] || \
{ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>$(obj)include/config.h ; \
$(XECHO) "... HIGH-END model" ; \
}
@[ -z "$(findstring _25,$@)" ] || \
{ echo "#define CONFIG_PPCHAMELEON_CLK_25" >>$(obj)include/config.h ; \
$(XECHO) "SysClk = 25MHz" ; \
}
@[ -z "$(findstring _33,$@)" ] || \
{ echo "#define CONFIG_PPCHAMELEON_CLK_33" >>$(obj)include/config.h ; \
$(XECHO) "SysClk = 33MHz" ; \
}
@$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
quad100hd_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx quad100hd
redwood_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx redwood amcc
sbc405_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx sbc405
sc3_config:unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx sc3
sequoia_config \
rainier_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
@$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc
sequoia_nand_config \
rainier_nand_config: unconfig
@mkdir -p $(obj)include $(obj)board/amcc/sequoia
@mkdir -p $(obj)nand_spl/board/amcc/sequoia
@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
@$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc
@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
taihu_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx taihu amcc
taishan_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx taishan amcc
VOH405_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx voh405 esd
VOM405_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx vom405 esd
W7OLMC_config \
W7OLMG_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx w7o
# Walnut & Sycamore images are identical (recognized via PVR)
walnut_config \
sycamore_config: unconfig
@$(MKCONFIG) -n $@ -a walnut ppc ppc4xx walnut amcc
WUH405_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx wuh405 esd
XPEDITE1K_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx xpedite1k
yosemite_config \
yellowstone_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
@$(MKCONFIG) -n $@ -a yosemite ppc ppc4xx yosemite amcc
yucca_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx yucca amcc
zeus_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx zeus
#########################################################################
## MPC8220 Systems
#########################################################################
Alaska8220_config \
Yukon8220_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8220 alaska
sorcery_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8220 sorcery
#########################################################################
## MPC824x Systems
#########################################################################
xtract_82xx = $(subst _BIGFLASH,,$(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1))))))
A3000_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc824x a3000
barco_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc824x barco
BMW_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc824x bmw
CPC45_config \
CPC45_ROMBOOT_config: unconfig
@$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc824x cpc45
@cd $(obj)include ; \
if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
$(XECHO) "... booting from 8-bit flash" ; \
else \
echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
$(XECHO) "... booting from 64-bit flash" ; \
fi; \
echo "export CONFIG_BOOT_ROM" >> config.mk;
CU824_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc824x cu824
debris_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc824x debris etin
eXalion_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc824x eXalion
HIDDEN_DRAGON_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc824x hidden_dragon
kvme080_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc824x kvme080 etin
# HDLAN is broken ATM. Should be fixed as soon as hardware is available and as
# time permits.
#linkstation_HDLAN_config \
# Remove this line when HDLAN is fixed
linkstation_HGLAN_config: unconfig
@mkdir -p $(obj)include
@case $@ in \
*HGLAN*) echo "#define CONFIG_HGLAN 1" >$(obj)include/config.h; ;; \
*HDLAN*) echo "#define CONFIG_HLAN 1" >$(obj)include/config.h; ;; \
esac
@$(MKCONFIG) -n $@ -a linkstation ppc mpc824x linkstation
MOUSSE_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc824x mousse
MUSENKI_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc824x musenki
MVBLUE_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc824x mvblue
OXC_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc824x oxc
PN62_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc824x pn62
Sandpoint8240_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint
Sandpoint8245_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint
sbc8240_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc824x sbc8240
SL8245_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc824x sl8245
utx8245_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc824x utx8245
#########################################################################
## MPC8260 Systems
#########################################################################
atc_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8260 atc
cogent_mpc8260_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8260 cogent
CPU86_config \
CPU86_ROMBOOT_config: unconfig
@$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu86
@cd $(obj)include ; \
if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
$(XECHO) "... booting from 8-bit flash" ; \
else \
echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
$(XECHO) "... booting from 64-bit flash" ; \
fi; \
echo "export CONFIG_BOOT_ROM" >> config.mk;
CPU87_config \
CPU87_ROMBOOT_config: unconfig
@$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu87
@cd $(obj)include ; \
if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
$(XECHO) "... booting from 8-bit flash" ; \
else \
echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
$(XECHO) "... booting from 64-bit flash" ; \
fi; \
echo "export CONFIG_BOOT_ROM" >> config.mk;
ep8248_config \
ep8248E_config : unconfig
@$(MKCONFIG) ep8248 ppc mpc8260 ep8248
ep8260_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8260 ep8260
ep82xxm_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8260 ep82xxm
gw8260_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8260 gw8260
hymod_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8260 hymod
IDS8247_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8260 ids8247
IPHASE4539_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8260 iphase4539
ISPAN_config \
ISPAN_REVB_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _REVB_,$@)" ] ; then \
echo "#define CFG_REV_B" > $(obj)include/config.h ; \
fi
@$(MKCONFIG) -a ISPAN ppc mpc8260 ispan
mgcoge_config : unconfig
@$(MKCONFIG) mgcoge ppc mpc8260 mgcoge
MPC8260ADS_config \
MPC8260ADS_lowboot_config \
MPC8260ADS_33MHz_config \
MPC8260ADS_33MHz_lowboot_config \
MPC8260ADS_40MHz_config \
MPC8260ADS_40MHz_lowboot_config \
MPC8272ADS_config \
MPC8272ADS_lowboot_config \
PQ2FADS_config \
PQ2FADS_lowboot_config \
PQ2FADS-VR_config \
PQ2FADS-VR_lowboot_config \
PQ2FADS-ZU_config \
PQ2FADS-ZU_lowboot_config \
PQ2FADS-ZU_66MHz_config \
PQ2FADS-ZU_66MHz_lowboot_config \
: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/freescale/mpc8260ads
$(if $(findstring PQ2FADS,$@), \
@echo "#define CONFIG_ADSTYPE CFG_PQ2FADS" > $(obj)include/config.h, \
@echo "#define CONFIG_ADSTYPE CFG_"$(subst MPC,,$(word 1,$(subst _, ,$@))) > $(obj)include/config.h)
$(if $(findstring MHz,$@), \
@echo "#define CONFIG_8260_CLKIN" $(subst MHz,,$(word 2,$(subst _, ,$@)))"000000" >> $(obj)include/config.h, \
$(if $(findstring VR,$@), \
@echo "#define CONFIG_8260_CLKIN 66000000" >> $(obj)include/config.h))
@[ -z "$(findstring lowboot_,$@)" ] || \
{ echo "TEXT_BASE = 0xFF800000" >$(obj)board/freescale/mpc8260ads/config.tmp ; \
$(XECHO) "... with lowboot configuration" ; \
}
@$(MKCONFIG) -a MPC8260ADS ppc mpc8260 mpc8260ads freescale
MPC8266ADS_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8260 mpc8266ads freescale
muas3001_dev_config \
muas3001_config : unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/muas3001
@if [ "$(findstring dev,$@)" ] ; then \
echo "#define CONFIG_MUAS_DEV_BOARD" > $(obj)include/config.h ; \
fi
@$(MKCONFIG) -a muas3001 ppc mpc8260 muas3001
# PM825/PM826 default configuration: small (= 8 MB) Flash / boot from 64-bit flash
PM825_config \
PM825_ROMBOOT_config \
PM825_BIGFLASH_config \
PM825_ROMBOOT_BIGFLASH_config \
PM826_config \
PM826_ROMBOOT_config \
PM826_BIGFLASH_config \
PM826_ROMBOOT_BIGFLASH_config: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/pm826
@if [ "$(findstring PM825_,$@)" ] ; then \
echo "#define CONFIG_PCI" >$(obj)include/config.h ; \
else \
>$(obj)include/config.h ; \
fi
@if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
$(XECHO) "... booting from 8-bit flash" ; \
echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
$(XECHO) "... with 32 MB Flash" ; \
echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \
fi; \
else \
$(XECHO) "... booting from 64-bit flash" ; \
if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
$(XECHO) "... with 32 MB Flash" ; \
echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \
echo "TEXT_BASE = 0x40000000" >$(obj)board/pm826/config.tmp ; \
else \
echo "TEXT_BASE = 0xFF000000" >$(obj)board/pm826/config.tmp ; \
fi; \
fi
@$(MKCONFIG) -a PM826 ppc mpc8260 pm826
PM828_config \
PM828_PCI_config \
PM828_ROMBOOT_config \
PM828_ROMBOOT_PCI_config: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/pm826
@if [ "$(findstring _PCI_,$@)" ] ; then \
echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
$(XECHO) "... with PCI enabled" ; \
fi
@if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
$(XECHO) "... booting from 8-bit flash" ; \
echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
fi
@$(MKCONFIG) -a PM828 ppc mpc8260 pm828
ppmc8260_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8260 ppmc8260
Rattler8248_config \
Rattler_config: unconfig
@mkdir -p $(obj)include
$(if $(findstring 8248,$@), \
@echo "#define CONFIG_MPC8248" > $(obj)include/config.h)
@$(MKCONFIG) -a Rattler ppc mpc8260 rattler
RPXsuper_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8260 rpxsuper
rsdproto_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8260 rsdproto
sacsng_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8260 sacsng
sbc8260_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8260 sbc8260
SCM_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8260 SCM siemens
TQM8255_AA_config \
TQM8260_AA_config \
TQM8260_AB_config \
TQM8260_AC_config \
TQM8260_AD_config \
TQM8260_AE_config \
TQM8260_AF_config \
TQM8260_AG_config \
TQM8260_AH_config \
TQM8260_AI_config \
TQM8265_AA_config: unconfig
@mkdir -p $(obj)include
@case "$@" in \
TQM8255_AA_config) CTYPE=MPC8255; CFREQ=300; CACHE=no; BMODE=8260;; \
TQM8260_AA_config) CTYPE=MPC8260; CFREQ=200; CACHE=no; BMODE=8260;; \
TQM8260_AB_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;; \
TQM8260_AC_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;; \
TQM8260_AD_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \
TQM8260_AE_config) CTYPE=MPC8260; CFREQ=266; CACHE=no; BMODE=8260;; \
TQM8260_AF_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \
TQM8260_AG_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=8260;; \
TQM8260_AH_config) CTYPE=MPC8260; CFREQ=300; CACHE=yes; BMODE=60x;; \
TQM8260_AI_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \
TQM8265_AA_config) CTYPE=MPC8265; CFREQ=300; CACHE=no; BMODE=60x;; \
esac; \
if [ "$${CTYPE}" != "MPC8260" ] ; then \
echo "#define CONFIG_$${CTYPE}" >>$(obj)include/config.h ; \
fi; \
echo "#define CONFIG_$${CFREQ}MHz" >>$(obj)include/config.h ; \
echo "... with $${CFREQ}MHz system clock" ; \
if [ "$${CACHE}" = "yes" ] ; then \
echo "#define CONFIG_L2_CACHE" >>$(obj)include/config.h ; \
$(XECHO) "... with L2 Cache support" ; \
else \
echo "#undef CONFIG_L2_CACHE" >>$(obj)include/config.h ; \
$(XECHO) "... without L2 Cache support" ; \
fi; \
if [ "$${BMODE}" = "60x" ] ; then \
echo "#define CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \
$(XECHO) "... with 60x Bus Mode" ; \
else \
echo "#undef CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \
$(XECHO) "... without 60x Bus Mode" ; \
fi
@$(MKCONFIG) -a TQM8260 ppc mpc8260 tqm8260 tqc
TQM8272_config: unconfig
@$(MKCONFIG) TQM8272 ppc mpc8260 tqm8272 tqc
VoVPN-GW_66MHz_config \
VoVPN-GW_100MHz_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > $(obj)include/config.h
@$(MKCONFIG) -a VoVPN-GW ppc mpc8260 vovpn-gw funkwerk
ZPC1900_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8260 zpc1900
#########################################################################
## Coldfire
#########################################################################
M52277EVB_config: unconfig
@$(MKCONFIG) -a M52277EVB m68k mcf5227x m52277evb freescale
M5235EVB_config \
M5235EVB_Flash16_config \
M5235EVB_Flash32_config: unconfig
@case "$@" in \
M5235EVB_config) FLASH=16;; \
M5235EVB_Flash16_config) FLASH=16;; \
M5235EVB_Flash32_config) FLASH=32;; \
esac; \
if [ "$${FLASH}" != "16" ] ; then \
echo "#define NORFLASH_PS32BIT 1" >> $(obj)include/config.h ; \
echo "TEXT_BASE = 0xFFC00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
cp $(obj)board/freescale/m5235evb/u-boot.32 $(obj)board/freescale/m5235evb/u-boot.lds ; \
else \
echo "TEXT_BASE = 0xFFE00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
cp $(obj)board/freescale/m5235evb/u-boot.16 $(obj)board/freescale/m5235evb/u-boot.lds ; \
fi
@$(MKCONFIG) -a M5235EVB m68k mcf523x m5235evb freescale
M5249EVB_config : unconfig
@$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5249evb freescale
M5253DEMO_config : unconfig
@$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5253demo freescale
M5253EVBE_config : unconfig
@$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5253evbe freescale
cobra5272_config : unconfig
@$(MKCONFIG) $(@:_config=) m68k mcf52x2 cobra5272
EB+MCF-EV123_config : unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/BuS/EB+MCF-EV123
@echo "TEXT_BASE = 0xFFE00000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
@$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
EB+MCF-EV123_internal_config : unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/BuS/EB+MCF-EV123
@echo "TEXT_BASE = 0xF0000000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
@$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
idmr_config : unconfig
@$(MKCONFIG) $(@:_config=) m68k mcf52x2 idmr
M5271EVB_config : unconfig
@$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5271evb freescale
M5272C3_config : unconfig
@$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5272c3 freescale
M5275EVB_config : unconfig
@$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5275evb freescale
M5282EVB_config : unconfig
@$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5282evb freescale
M5329AFEE_config \
M5329BFEE_config : unconfig
@case "$@" in \
M5329AFEE_config) NAND=0;; \
M5329BFEE_config) NAND=16;; \
esac; \
if [ "$${NAND}" != "0" ] ; then \
echo "#define NANDFLASH_SIZE $${NAND}" > $(obj)include/config.h ; \
fi
@$(MKCONFIG) -a M5329EVB m68k mcf532x m5329evb freescale
M5373EVB_config : unconfig
@case "$@" in \
M5373EVB_config) NAND=16;; \
esac; \
if [ "$${NAND}" != "0" ] ; then \
echo "#define NANDFLASH_SIZE $${NAND}" > $(obj)include/config.h ; \
fi
@$(MKCONFIG) -a M5373EVB m68k mcf532x m5373evb freescale
M54451EVB_config \
M54451EVB_spansion_config \
M54451EVB_stmicro_config : unconfig
@case "$@" in \
M54451EVB_config) FLASH=SPANSION;; \
M54451EVB_spansion_config) FLASH=SPANSION;; \
M54451EVB_stmicro_config) FLASH=STMICRO;; \
esac; \
if [ "$${FLASH}" = "SPANSION" ] ; then \
echo "#define CFG_SPANSION_BOOT" >> $(obj)include/config.h ; \
echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54451evb/config.tmp ; \
cp $(obj)board/freescale/m54451evb/u-boot.spa $(obj)board/freescale/m54451evb/u-boot.lds ; \
$(XECHO) "... with SPANSION boot..." ; \
fi; \
if [ "$${FLASH}" = "STMICRO" ] ; then \
echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \
echo "#define CFG_STMICRO_BOOT" >> $(obj)include/config.h ; \
echo "TEXT_BASE = 0x47E00000" > $(obj)board/freescale/m54451evb/config.tmp ; \
cp $(obj)board/freescale/m54451evb/u-boot.stm $(obj)board/freescale/m54451evb/u-boot.lds ; \
$(XECHO) "... with ST Micro boot..." ; \
fi; \
echo "#define CFG_INPUT_CLKSRC 24000000" >> $(obj)include/config.h ;
@$(MKCONFIG) -a M54451EVB m68k mcf5445x m54451evb freescale
M54455EVB_config \
M54455EVB_atmel_config \
M54455EVB_intel_config \
M54455EVB_a33_config \
M54455EVB_a66_config \
M54455EVB_i33_config \
M54455EVB_i66_config \
M54455EVB_stm33_config : unconfig
@case "$@" in \
M54455EVB_config) FLASH=ATMEL; FREQ=33333333;; \
M54455EVB_atmel_config) FLASH=ATMEL; FREQ=33333333;; \
M54455EVB_intel_config) FLASH=INTEL; FREQ=33333333;; \
M54455EVB_a33_config) FLASH=ATMEL; FREQ=33333333;; \
M54455EVB_a66_config) FLASH=ATMEL; FREQ=66666666;; \
M54455EVB_i33_config) FLASH=INTEL; FREQ=33333333;; \
M54455EVB_i66_config) FLASH=INTEL; FREQ=66666666;; \
M54455EVB_stm33_config) FLASH=STMICRO; FREQ=33333333;; \
esac; \
if [ "$${FLASH}" = "INTEL" ] ; then \
echo "#define CFG_INTEL_BOOT" >> $(obj)include/config.h ; \
echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \
$(XECHO) "... with INTEL boot..." ; \
fi; \
if [ "$${FLASH}" = "ATMEL" ] ; then \
echo "#define CFG_ATMEL_BOOT" >> $(obj)include/config.h ; \
echo "TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
cp $(obj)board/freescale/m54455evb/u-boot.atm $(obj)board/freescale/m54455evb/u-boot.lds ; \
$(XECHO) "... with ATMEL boot..." ; \
fi; \
if [ "$${FLASH}" = "STMICRO" ] ; then \
echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \
echo "#define CFG_STMICRO_BOOT" >> $(obj)include/config.h ; \
echo "TEXT_BASE = 0x4FE00000" > $(obj)board/freescale/m54455evb/config.tmp ; \
cp $(obj)board/freescale/m54455evb/u-boot.stm $(obj)board/freescale/m54455evb/u-boot.lds ; \
$(XECHO) "... with ST Micro boot..." ; \
fi; \
echo "#define CFG_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \
$(XECHO) "... with $${FREQ}Hz input clock"
@$(MKCONFIG) -a M54455EVB m68k mcf5445x m54455evb freescale
M5475AFE_config \
M5475BFE_config \
M5475CFE_config \
M5475DFE_config \
M5475EFE_config \
M5475FFE_config \
M5475GFE_config : unconfig
@case "$@" in \
M5475AFE_config) BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
M5475BFE_config) BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \
M5475CFE_config) BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \
M5475DFE_config) BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \
M5475EFE_config) BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \
M5475FFE_config) BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \
M5475GFE_config) BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
esac; \
echo "#define CFG_BUSCLK 133333333" > $(obj)include/config.h ; \
echo "#define CFG_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \
echo "#define CFG_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \
if [ "$${RAM1}" != "0" ] ; then \
echo "#define CFG_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \
fi; \
if [ "$${CODE}" != "0" ] ; then \
echo "#define CFG_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \
fi; \
if [ "$${VID}" == "1" ] ; then \
echo "#define CFG_VIDEO" >> $(obj)include/config.h ; \
fi; \
if [ "$${USB}" == "1" ] ; then \
echo "#define CFG_USBCTRL" >> $(obj)include/config.h ; \
fi
@$(MKCONFIG) -a M5475EVB m68k mcf547x_8x m547xevb freescale
M5485AFE_config \
M5485BFE_config \
M5485CFE_config \
M5485DFE_config \
M5485EFE_config \
M5485FFE_config \
M5485GFE_config \
M5485HFE_config : unconfig
@case "$@" in \
M5485AFE_config) BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
M5485BFE_config) BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \
M5485CFE_config) BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \
M5485DFE_config) BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \
M5485EFE_config) BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \
M5485FFE_config) BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \
M5485GFE_config) BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
M5485HFE_config) BOOT=2;CODE=16;VID=1;USB=0;RAM=64;RAM1=0;; \
esac; \
echo "#define CFG_BUSCLK 100000000" > $(obj)include/config.h ; \
echo "#define CFG_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \
echo "#define CFG_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \
if [ "$${RAM1}" != "0" ] ; then \
echo "#define CFG_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \
fi; \
if [ "$${CODE}" != "0" ] ; then \
echo "#define CFG_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \
fi; \
if [ "$${VID}" == "1" ] ; then \
echo "#define CFG_VIDEO" >> $(obj)include/config.h ; \
fi; \
if [ "$${USB}" == "1" ] ; then \
echo "#define CFG_USBCTRL" >> $(obj)include/config.h ; \
fi
@$(MKCONFIG) -a M5485EVB m68k mcf547x_8x m548xevb freescale
TASREG_config : unconfig
@$(MKCONFIG) $(@:_config=) m68k mcf52x2 tasreg esd
#########################################################################
## MPC83xx Systems
#########################################################################
MPC8313ERDB_33_config \
MPC8313ERDB_66_config \
MPC8313ERDB_NAND_33_config \
MPC8313ERDB_NAND_66_config: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/freescale/mpc8313erdb
@if [ "$(findstring _33_,$@)" ] ; then \
$(XECHO) -n "...33M ..." ; \
echo "#define CFG_33MHZ" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _66_,$@)" ] ; then \
$(XECHO) -n "...66M..." ; \
echo "#define CFG_66MHZ" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _NAND_,$@)" ] ; then \
$(XECHO) -n "...NAND..." ; \
echo "TEXT_BASE = 0x00100000" > $(obj)board/freescale/mpc8313erdb/config.tmp ; \
echo "#define CONFIG_NAND_U_BOOT" >>$(obj)include/config.h ; \
fi ;
@$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb freescale
MPC8315ERDB_config: unconfig
@$(MKCONFIG) -a MPC8315ERDB ppc mpc83xx mpc8315erdb freescale
MPC8323ERDB_config: unconfig
@$(MKCONFIG) -a MPC8323ERDB ppc mpc83xx mpc8323erdb freescale
MPC832XEMDS_config \
MPC832XEMDS_HOST_33_config \
MPC832XEMDS_HOST_66_config \
MPC832XEMDS_SLAVE_config \
MPC832XEMDS_ATM_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _HOST_,$@)" ] ; then \
$(XECHO) -n "... PCI HOST " ; \
echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _SLAVE_,$@)" ] ; then \
$(XECHO) "...PCI SLAVE 66M" ; \
echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _33_,$@)" ] ; then \
$(XECHO) -n "...33M ..." ; \
echo "#define PCI_33M" >>$(obj)include/config.h ; \
echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _66_,$@)" ] ; then \
$(XECHO) -n "...66M..." ; \
echo "#define PCI_66M" >>$(obj)include/config.h ; \
echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _ATM_,$@)" ] ; then \
$(XECHO) -n "...ATM..." ; \
echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
echo "#define CONFIG_PQ_MDS_PIB_ATM 1" >>$(obj)include/config.h ; \
fi ;
@$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds freescale
MPC8349EMDS_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349emds freescale
MPC8349ITX_config \
MPC8349ITX_LOWBOOT_config \
MPC8349ITXGP_config: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/freescale/mpc8349itx
@echo "#define CONFIG_$(subst _LOWBOOT,,$(@:_config=))" >> $(obj)include/config.h
@if [ "$(findstring GP,$@)" ] ; then \
echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \
fi
@if [ "$(findstring LOWBOOT,$@)" ] ; then \
echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \
fi
@$(MKCONFIG) -a -n $(@:_config=) MPC8349ITX ppc mpc83xx mpc8349itx freescale
MPC8360EMDS_config \
MPC8360EMDS_HOST_33_config \
MPC8360EMDS_HOST_66_config \
MPC8360EMDS_SLAVE_config \
MPC8360EMDS_ATM_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _HOST_,$@)" ] ; then \
$(XECHO) -n "... PCI HOST " ; \
echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _SLAVE_,$@)" ] ; then \
$(XECHO) "...PCI SLAVE 66M" ; \
echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _33_,$@)" ] ; then \
$(XECHO) -n "...33M ..." ; \
echo "#define PCI_33M" >>$(obj)include/config.h ; \
echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _66_,$@)" ] ; then \
$(XECHO) -n "...66M..." ; \
echo "#define PCI_66M" >>$(obj)include/config.h ; \
echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _ATM_,$@)" ] ; then \
$(XECHO) -n "...ATM..." ; \
echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
echo "#define CONFIG_PQ_MDS_PIB_ATM 1" >>$(obj)include/config.h ; \
fi ;
@$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds freescale
MPC8360ERDK_33_config \
MPC8360ERDK_66_config \
MPC8360ERDK_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _33_,$@)" ] ; then \
$(XECHO) -n "... CLKIN 33MHz " ; \
echo "#define CONFIG_CLKIN_33MHZ" >>$(obj)include/config.h ;\
fi ;
@$(MKCONFIG) -a MPC8360ERDK ppc mpc83xx mpc8360erdk freescale
MPC837XEMDS_config \
MPC837XEMDS_HOST_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _HOST_,$@)" ] ; then \
$(XECHO) -n "... PCI HOST " ; \
echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
fi ;
@$(MKCONFIG) -a MPC837XEMDS ppc mpc83xx mpc837xemds freescale
MPC837XERDB_config: unconfig
@$(MKCONFIG) -a MPC837XERDB ppc mpc83xx mpc837xerdb freescale
MVBLM7_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc83xx mvblm7 matrix_vision
sbc8349_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc83xx sbc8349
TQM834x_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc83xx tqm834x tqc
#########################################################################
## MPC85xx Systems
#########################################################################
ATUM8548_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc85xx atum8548
MPC8536DS_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8536ds freescale
MPC8540ADS_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8540ads freescale
MPC8540EVAL_config \
MPC8540EVAL_33_config \
MPC8540EVAL_66_config \
MPC8540EVAL_33_slave_config \
MPC8540EVAL_66_slave_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _33_,$@)" ] ; then \
$(XECHO) "... 33 MHz PCI" ; \
else \
echo "#define CONFIG_SYSCLK_66M" >>$(obj)include/config.h ; \
$(XECHO) "... 66 MHz PCI" ; \
fi ; \
if [ "$(findstring _slave_,$@)" ] ; then \
echo "#define CONFIG_PCI_SLAVE" >>$(obj)include/config.h ; \
$(XECHO) " slave" ; \
else \
$(XECHO) " host" ; \
fi
@$(MKCONFIG) -a MPC8540EVAL ppc mpc85xx mpc8540eval
MPC8560ADS_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8560ads freescale
MPC8541CDS_legacy_config \
MPC8541CDS_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _legacy_,$@)" ] ; then \
echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
$(XECHO) "... legacy" ; \
fi
@$(MKCONFIG) -a MPC8541CDS ppc mpc85xx mpc8541cds freescale
MPC8544DS_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8544ds freescale
MPC8548CDS_legacy_config \
MPC8548CDS_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _legacy_,$@)" ] ; then \
echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
$(XECHO) "... legacy" ; \
fi
@$(MKCONFIG) -a MPC8548CDS ppc mpc85xx mpc8548cds freescale
MPC8555CDS_legacy_config \
MPC8555CDS_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _legacy_,$@)" ] ; then \
echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
$(XECHO) "... legacy" ; \
fi
@$(MKCONFIG) -a MPC8555CDS ppc mpc85xx mpc8555cds freescale
MPC8568MDS_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8568mds freescale
MPC8572DS_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8572ds freescale
PM854_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc85xx pm854
PM856_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc85xx pm856
sbc8540_config \
sbc8540_33_config \
sbc8540_66_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _66_,$@)" ] ; then \
echo "#define CONFIG_PCI_66" >>$(obj)include/config.h ; \
$(XECHO) "... 66 MHz PCI" ; \
else \
$(XECHO) "... 33 MHz PCI" ; \
fi
@$(MKCONFIG) -a SBC8540 ppc mpc85xx sbc8560
sbc8548_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc85xx sbc8548
sbc8560_config \
sbc8560_33_config \
sbc8560_66_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _66_,$@)" ] ; then \
echo "#define CONFIG_PCI_66" >>$(obj)include/config.h ; \
$(XECHO) "... 66 MHz PCI" ; \
else \
$(XECHO) "... 33 MHz PCI" ; \
fi
@$(MKCONFIG) -a sbc8560 ppc mpc85xx sbc8560
socrates_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc85xx socrates
stxgp3_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc85xx stxgp3
stxssa_config \
stxssa_4M_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _4M_,$@)" ] ; then \
echo "#define CONFIG_STXSSA_4M" >>$(obj)include/config.h ; \
$(XECHO) "... with 4 MiB flash memory" ; \
fi
@$(MKCONFIG) -a stxssa ppc mpc85xx stxssa
TQM8540_config \
TQM8541_config \
TQM8548_config \
TQM8555_config \
TQM8560_config: unconfig
@mkdir -p $(obj)include
@CTYPE=$(subst TQM,,$(@:_config=)); \
$(XECHO) "... TQM"$${CTYPE}; \
echo "#define CONFIG_MPC$${CTYPE}">>$(obj)include/config.h; \
echo "#define CONFIG_TQM$${CTYPE}">>$(obj)include/config.h; \
echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>$(obj)include/config.h; \
echo "#define CONFIG_BOARDNAME \"TQM$${CTYPE}\"">>$(obj)include/config.h;
@$(MKCONFIG) -a TQM85xx ppc mpc85xx tqm85xx tqc
#########################################################################
## MPC86xx Systems
#########################################################################
MPC8610HPCD_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8610hpcd freescale
MPC8641HPCN_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8641hpcn freescale
sbc8641d_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc86xx sbc8641d
#########################################################################
## 74xx/7xx Systems
#########################################################################
AmigaOneG3SE_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx AmigaOneG3SE MAI
BAB7xx_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx bab7xx eltec
CPCI750_config: unconfig
@$(MKCONFIG) CPCI750 ppc 74xx_7xx cpci750 esd
DB64360_config: unconfig
@$(MKCONFIG) DB64360 ppc 74xx_7xx db64360 Marvell
DB64460_config: unconfig
@$(MKCONFIG) DB64460 ppc 74xx_7xx db64460 Marvell
ELPPC_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx elppc eltec
EVB64260_config \
EVB64260_750CX_config: unconfig
@$(MKCONFIG) EVB64260 ppc 74xx_7xx evb64260
mpc7448hpc2_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx mpc7448hpc2 freescale
P3G4_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260
p3m750_config \
p3m7448_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring 750_,$@)" ] ; then \
echo "#define CONFIG_P3M750" >>$(obj)include/config.h ; \
else \
echo "#define CONFIG_P3M7448" >>$(obj)include/config.h ; \
fi
@$(MKCONFIG) -a p3mx ppc 74xx_7xx p3mx prodrive
PCIPPC2_config \
PCIPPC6_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx pcippc2
ppmc7xx_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx ppmc7xx
ZUMA_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260
#========================================================================
# ARM
#========================================================================
#########################################################################
## StrongARM Systems
#########################################################################
assabet_config : unconfig
@$(MKCONFIG) $(@:_config=) arm sa1100 assabet
dnp1110_config : unconfig
@$(MKCONFIG) $(@:_config=) arm sa1100 dnp1110
gcplus_config : unconfig
@$(MKCONFIG) $(@:_config=) arm sa1100 gcplus
lart_config : unconfig
@$(MKCONFIG) $(@:_config=) arm sa1100 lart
shannon_config : unconfig
@$(MKCONFIG) $(@:_config=) arm sa1100 shannon
#########################################################################
## ARM92xT Systems
#########################################################################
#########################################################################
## Atmel AT91RM9200 Systems
#########################################################################
at91rm9200dk_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200
at91sam9261ek_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9261ek atmel at91
at91sam9263ek_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9263ek atmel at91
at91sam9rlek_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9rlek atmel at91
cmc_pu2_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200
csb637_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t csb637 NULL at91rm9200
kb9202_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t kb9202 NULL at91rm9200
m501sk_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t m501sk NULL at91rm9200
mp2usb_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t mp2usb NULL at91rm9200
#########################################################################
## Atmel ARM926EJ-S Systems
#########################################################################
at91cap9adk_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs at91cap9adk atmel at91
at91sam9260ek_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9260ek atmel at91
########################################################################
## ARM Integrator boards - see doc/README-integrator for more info.
integratorap_config \
ap_config \
ap966_config \
ap922_config \
ap922_XA10_config \
ap7_config \
ap720t_config \
ap920t_config \
ap926ejs_config \
ap946es_config: unconfig
@board/integratorap/split_by_variant.sh $@
integratorcp_config \
cp_config \
cp920t_config \
cp926ejs_config \
cp946es_config \
cp1136_config \
cp966_config \
cp922_config \
cp922_XA10_config \
cp1026_config: unconfig
@board/integratorcp/split_by_variant.sh $@
davinci_dvevm_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs dvevm davinci davinci
davinci_schmoogie_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs schmoogie davinci davinci
davinci_sffsdr_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs sffsdr davinci davinci
davinci_sonata_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs sonata davinci davinci
lpd7a400_config \
lpd7a404_config: unconfig
@$(MKCONFIG) $(@:_config=) arm lh7a40x lpd7a40x
mx1ads_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t mx1ads NULL imx
mx1fs2_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t mx1fs2 NULL imx
netstar_config: unconfig
@$(MKCONFIG) $(@:_config=) arm arm925t netstar
omap1510inn_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm925t omap1510inn
xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1))))
omap1610inn_config \
omap1610inn_cs0boot_config \
omap1610inn_cs3boot_config \
omap1610inn_cs_autoboot_config \
omap1610h2_config \
omap1610h2_cs0boot_config \
omap1610h2_cs3boot_config \
omap1610h2_cs_autoboot_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _cs0boot_, $@)" ] ; then \
echo "#define CONFIG_CS0_BOOT" >> .$(obj)include/config.h ; \
$(XECHO) "... configured for CS0 boot"; \
elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \
echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)include/config.h ; \
$(XECHO) "... configured for CS_AUTO boot"; \
else \
echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
$(XECHO) "... configured for CS3 boot"; \
fi;
@$(MKCONFIG) -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn NULL omap
omap5912osk_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs omap5912osk NULL omap
xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1)))
omap730p2_config \
omap730p2_cs0boot_config \
omap730p2_cs3boot_config : unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _cs0boot_, $@)" ] ; then \
echo "#define CONFIG_CS0_BOOT" >> $(obj)include/config.h ; \
$(XECHO) "... configured for CS0 boot"; \
else \
echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
$(XECHO) "... configured for CS3 boot"; \
fi;
@$(MKCONFIG) -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 NULL omap
sbc2410x_config: unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t sbc2410x NULL s3c24x0
scb9328_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t scb9328 NULL imx
smdk2400_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t smdk2400 NULL s3c24x0
smdk2410_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t smdk2410 NULL s3c24x0
SX1_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm925t sx1
# TRAB default configuration: 8 MB Flash, 32 MB RAM
xtract_trab = $(subst _bigram,,$(subst _bigflash,,$(subst _old,,$(subst _config,,$1))))
trab_config \
trab_bigram_config \
trab_bigflash_config \
trab_old_config: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/trab
@[ -z "$(findstring _bigram,$@)" ] || \
{ echo "#define CONFIG_FLASH_8MB" >>$(obj)include/config.h ; \
echo "#define CONFIG_RAM_32MB" >>$(obj)include/config.h ; \
$(XECHO) "... with 8 MB Flash, 32 MB RAM" ; \
}
@[ -z "$(findstring _bigflash,$@)" ] || \
{ echo "#define CONFIG_FLASH_16MB" >>$(obj)include/config.h ; \
echo "#define CONFIG_RAM_16MB" >>$(obj)include/config.h ; \
$(XECHO) "... with 16 MB Flash, 16 MB RAM" ; \
echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \
}
@[ -z "$(findstring _old,$@)" ] || \
{ echo "#define CONFIG_FLASH_8MB" >>$(obj)include/config.h ; \
echo "#define CONFIG_RAM_16MB" >>$(obj)include/config.h ; \
$(XECHO) "... with 8 MB Flash, 16 MB RAM" ; \
echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \
}
@$(MKCONFIG) -a $(call xtract_trab,$@) arm arm920t trab NULL s3c24x0
VCMA9_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t vcma9 mpl s3c24x0
#########################################################################
# ARM supplied Versatile development boards
#########################################################################
cm4008_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t cm4008 NULL ks8695
cm41xx_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t cm41xx NULL ks8695
versatile_config \
versatileab_config \
versatilepb_config : unconfig
@board/versatile/split_by_variant.sh $@
voiceblue_config: unconfig
@$(MKCONFIG) $(@:_config=) arm arm925t voiceblue
#########################################################################
## S3C44B0 Systems
#########################################################################
B2_config : unconfig
@$(MKCONFIG) $(@:_config=) arm s3c44b0 B2 dave
#########################################################################
## ARM720T Systems
#########################################################################
armadillo_config: unconfig
@$(MKCONFIG) $(@:_config=) arm arm720t armadillo
ep7312_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm720t ep7312
impa7_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm720t impa7
modnet50_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm720t modnet50
evb4510_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm720t evb4510
lpc2292sodimm_config: unconfig
@$(MKCONFIG) $(@:_config=) arm arm720t lpc2292sodimm NULL lpc2292
SMN42_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm720t SMN42 siemens lpc2292
#########################################################################
## XScale Systems
#########################################################################
actux1_config : unconfig
@$(MKCONFIG) $(@:_config=) arm ixp actux1
actux2_config : unconfig
@$(MKCONFIG) $(@:_config=) arm ixp actux2
actux3_config : unconfig
@$(MKCONFIG) $(@:_config=) arm ixp actux3
actux4_config : unconfig
@$(MKCONFIG) $(@:_config=) arm ixp actux4
cerf250_config : unconfig
@$(MKCONFIG) $(@:_config=) arm pxa cerf250
cradle_config : unconfig
@$(MKCONFIG) $(@:_config=) arm pxa cradle
csb226_config : unconfig
@$(MKCONFIG) $(@:_config=) arm pxa csb226
delta_config : unconfig
@$(MKCONFIG) $(@:_config=) arm pxa delta
innokom_config : unconfig
@$(MKCONFIG) $(@:_config=) arm pxa innokom
ixdp425_config : unconfig
@$(MKCONFIG) $(@:_config=) arm ixp ixdp425
ixdpg425_config : unconfig
@$(MKCONFIG) $(@:_config=) arm ixp ixdp425
lubbock_config : unconfig
@$(MKCONFIG) $(@:_config=) arm pxa lubbock
pleb2_config : unconfig
@$(MKCONFIG) $(@:_config=) arm pxa pleb2
logodl_config : unconfig
@$(MKCONFIG) $(@:_config=) arm pxa logodl
pdnb3_config \
scpu_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring scpu_,$@)" ] ; then \
echo "#define CONFIG_SCPU" >>$(obj)include/config.h ; \
$(XECHO) "... on SCPU board variant" ; \
fi
@$(MKCONFIG) -a pdnb3 arm ixp pdnb3 prodrive
pxa255_idp_config: unconfig
@$(MKCONFIG) $(@:_config=) arm pxa pxa255_idp
trizepsiv_config : unconfig
@$(MKCONFIG) $(@:_config=) arm pxa trizepsiv
wepep250_config : unconfig
@$(MKCONFIG) $(@:_config=) arm pxa wepep250
xaeniax_config : unconfig
@$(MKCONFIG) $(@:_config=) arm pxa xaeniax
xm250_config : unconfig
@$(MKCONFIG) $(@:_config=) arm pxa xm250
xsengine_config : unconfig
@$(MKCONFIG) $(@:_config=) arm pxa xsengine
zylonite_config :
@$(MKCONFIG) $(@:_config=) arm pxa zylonite
#########################################################################
## ARM1136 Systems
#########################################################################
apollon_config : unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)onenand_ipl/board/apollon
@echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h
@$(MKCONFIG) $(@:_config=) arm arm1136 apollon NULL omap24xx
@echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk
imx31_litekit_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm1136 imx31_litekit NULL mx31
imx31_phycore_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm1136 imx31_phycore NULL mx31
mx31ads_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads freescale mx31
omap2420h4_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 NULL omap24xx
#########################################################################
## ARM1176 Systems
#########################################################################
smdk6400_noUSB_config \
smdk6400_config : unconfig
@mkdir -p $(obj)include $(obj)board/samsung/smdk6400
@mkdir -p $(obj)nand_spl/board/samsung/smdk6400
@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
@if [ -z "$(findstring smdk6400_noUSB_config,$@)" ]; then \
echo "RAM_TEXT = 0x57e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\
$(MKCONFIG) $(@:_config=) arm arm1176 smdk6400 samsung s3c64xx; \
else \
echo "RAM_TEXT = 0xc7e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\
$(MKCONFIG) $(@:_noUSB_config=) arm arm1176 smdk6400 samsung s3c64xx; \
fi
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
#========================================================================
# i386
#========================================================================
#########################################################################
## AMD SC520 CDP
#########################################################################
sc520_cdp_config : unconfig
@$(MKCONFIG) $(@:_config=) i386 i386 sc520_cdp
sc520_spunk_config : unconfig
@$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk
sc520_spunk_rel_config : unconfig
@$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk
#========================================================================
# MIPS
#========================================================================
#########################################################################
## MIPS32 4Kc
#########################################################################
xtract_incaip = $(subst _100MHz,,$(subst _133MHz,,$(subst _150MHz,,$(subst _config,,$1))))
incaip_100MHz_config \
incaip_133MHz_config \
incaip_150MHz_config \
incaip_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring _100MHz,$@)" ] || \
{ echo "#define CPU_CLOCK_RATE 100000000" >>$(obj)include/config.h ; \
$(XECHO) "... with 100MHz system clock" ; \
}
@[ -z "$(findstring _133MHz,$@)" ] || \
{ echo "#define CPU_CLOCK_RATE 133000000" >>$(obj)include/config.h ; \
$(XECHO) "... with 133MHz system clock" ; \
}
@[ -z "$(findstring _150MHz,$@)" ] || \
{ echo "#define CPU_CLOCK_RATE 150000000" >>$(obj)include/config.h ; \
$(XECHO) "... with 150MHz system clock" ; \
}
@$(MKCONFIG) -a $(call xtract_incaip,$@) mips mips incaip
tb0229_config: unconfig
@$(MKCONFIG) $(@:_config=) mips mips tb0229
#########################################################################
## MIPS32 AU1X00
#########################################################################
dbau1000_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_DBAU1000 1" >$(obj)include/config.h
@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
dbau1100_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_DBAU1100 1" >$(obj)include/config.h
@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
dbau1500_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_DBAU1500 1" >$(obj)include/config.h
@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
dbau1550_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h
@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
dbau1550_el_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h
@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
gth2_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_GTH2 1" >$(obj)include/config.h
@$(MKCONFIG) -a gth2 mips mips gth2
pb1000_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_PB1000 1" >$(obj)include/config.h
@$(MKCONFIG) -a pb1x00 mips mips pb1x00
qemu_mips_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_QEMU_MIPS 1" >$(obj)include/config.h
@$(MKCONFIG) -a qemu-mips mips mips qemu-mips
#########################################################################
## MIPS64 5Kc
#########################################################################
purple_config : unconfig
@$(MKCONFIG) $(@:_config=) mips mips purple
#========================================================================
# Nios
#========================================================================
#########################################################################
## Nios32
#########################################################################
ADNPESC1_DNPEVA2_base_32_config \
ADNPESC1_base_32_config \
ADNPESC1_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring _DNPEVA2,$@)" ] || \
{ echo "#define CONFIG_DNPEVA2 1" >>$(obj)include/config.h ; \
$(XECHO) "... DNP/EVA2 configuration" ; \
}
@[ -z "$(findstring _base_32,$@)" ] || \
{ echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \
$(XECHO) "... NIOS 'base_32' configuration" ; \
}
@[ -z "$(findstring ADNPESC1_config,$@)" ] || \
{ echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \
$(XECHO) "... NIOS 'base_32' configuration (DEFAULT)" ; \
}
@$(MKCONFIG) -a ADNPESC1 nios nios adnpesc1 ssv
DK1C20_safe_32_config \
DK1C20_standard_32_config \
DK1C20_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring _safe_32,$@)" ] || \
{ echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \
$(XECHO) "... NIOS 'safe_32' configuration" ; \
}
@[ -z "$(findstring _standard_32,$@)" ] || \
{ echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
$(XECHO) "... NIOS 'standard_32' configuration" ; \
}
@[ -z "$(findstring DK1C20_config,$@)" ] || \
{ echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
$(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \
}
@$(MKCONFIG) -a DK1C20 nios nios dk1c20 altera
DK1S10_safe_32_config \
DK1S10_standard_32_config \
DK1S10_mtx_ldk_20_config \
DK1S10_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring _safe_32,$@)" ] || \
{ echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \
$(XECHO) "... NIOS 'safe_32' configuration" ; \
}
@[ -z "$(findstring _standard_32,$@)" ] || \
{ echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
$(XECHO) "... NIOS 'standard_32' configuration" ; \
}
@[ -z "$(findstring _mtx_ldk_20,$@)" ] || \
{ echo "#define CONFIG_NIOS_MTX_LDK_20 1" >>$(obj)include/config.h ; \
$(XECHO) "... NIOS 'mtx_ldk_20' configuration" ; \
}
@[ -z "$(findstring DK1S10_config,$@)" ] || \
{ echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
$(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \
}
@$(MKCONFIG) -a DK1S10 nios nios dk1s10 altera
#########################################################################
## Nios-II
#########################################################################
EP1C20_config : unconfig
@$(MKCONFIG) EP1C20 nios2 nios2 ep1c20 altera
EP1S10_config : unconfig
@$(MKCONFIG) EP1S10 nios2 nios2 ep1s10 altera
EP1S40_config : unconfig
@$(MKCONFIG) EP1S40 nios2 nios2 ep1s40 altera
PK1C20_config : unconfig
@$(MKCONFIG) PK1C20 nios2 nios2 pk1c20 psyent
PCI5441_config : unconfig
@$(MKCONFIG) PCI5441 nios2 nios2 pci5441 psyent
#========================================================================
## Microblaze
#========================================================================
ml401_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_ML401 1" > $(obj)include/config.h
@$(MKCONFIG) -a $(@:_config=) microblaze microblaze ml401 xilinx
suzaku_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_SUZAKU 1" > $(obj)include/config.h
@$(MKCONFIG) -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno
xupv2p_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_XUPV2P 1" > $(obj)include/config.h
@$(MKCONFIG) -a $(@:_config=) microblaze microblaze xupv2p xilinx
#========================================================================
# Blackfin
#========================================================================
# Analog Devices boards
BFIN_BOARDS = bf533-ezkit bf533-stamp bf537-stamp bf561-ezkit
$(BFIN_BOARDS:%=%_config) : unconfig
@$(MKCONFIG) $(@:_config=) blackfin blackfin $(@:_config=)
$(BFIN_BOARDS):
$(MAKE) $@_config
$(MAKE)
#========================================================================
# AVR32
#========================================================================
atngw100_config : unconfig
@$(MKCONFIG) $(@:_config=) avr32 at32ap atngw100 atmel at32ap700x
atstk1002_config : unconfig
@$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
atstk1003_config : unconfig
@$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
atstk1004_config : unconfig
@$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
atstk1006_config : unconfig
@$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
favr-32-ezkit_config : unconfig
@$(MKCONFIG) $(@:_config=) avr32 at32ap favr-32-ezkit earthlcd at32ap700x
hammerhead_config : unconfig
@$(MKCONFIG) $(@:_config=) avr32 at32ap hammerhead miromico at32ap700x
mimc200_config : unconfig
@$(MKCONFIG) $(@:_config=) avr32 at32ap mimc200 mimc at32ap700x
#========================================================================
# SH3 (SuperH)
#========================================================================
#########################################################################
## sh2 (Renesas SuperH)
#########################################################################
rsk7203_config: unconfig
@ >include/config.h
@echo "#define CONFIG_RSK7203 1" >> include/config.h
@./mkconfig -a $(@:_config=) sh sh2 rsk7203
#########################################################################
## sh3 (Renesas SuperH)
#########################################################################
mpr2_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_MPR2 1" > $(obj)include/config.h
@$(MKCONFIG) -a $(@:_config=) sh sh3 mpr2
ms7720se_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_MS7720SE 1" > $(obj)include/config.h
@$(MKCONFIG) -a $(@:_config=) sh sh3 ms7720se
#########################################################################
## sh4 (Renesas SuperH)
#########################################################################
MigoR_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_MIGO_R 1" > $(obj)include/config.h
@./mkconfig -a $(@:_config=) sh sh4 MigoR
ms7750se_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_MS7750SE 1" > $(obj)include/config.h
@$(MKCONFIG) -a $(@:_config=) sh sh4 ms7750se
ms7722se_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_MS7722SE 1" > $(obj)include/config.h
@$(MKCONFIG) -a $(@:_config=) sh sh4 ms7722se
r2dplus_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_R2DPLUS 1" > $(obj)include/config.h
@$(MKCONFIG) -a $(@:_config=) sh sh4 r2dplus
r7780mp_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_R7780MP 1" > $(obj)include/config.h
@$(MKCONFIG) -a $(@:_config=) sh sh4 r7780mp
sh7763rdp_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_SH7763RDP 1" > $(obj)include/config.h
@$(MKCONFIG) -a $(@:_config=) sh sh4 sh7763rdp
sh7785lcr_config : unconfig
@ >include/config.h
@echo "#define CONFIG_SH7785LCR 1" >> include/config.h
@$(MKCONFIG) -a $(@:_config=) sh sh4 sh7785lcr
ap325rxa_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_AP325RXA 1" > $(obj)include/config.h
@$(MKCONFIG) -a $(@:_config=) sh sh4 ap325rxa
#========================================================================
# SPARC
#========================================================================
#########################################################################
## LEON3
#########################################################################
# Gaisler GR-XC3S-1500 board
gr_xc3s_1500_config : unconfig
@$(MKCONFIG) $(@:_config=) sparc leon3 gr_xc3s_1500 gaisler
# Gaisler GR-CPCI-AX2000 board, a General purpose FPGA-AX system
gr_cpci_ax2000_config : unconfig
@$(MKCONFIG) $(@:_config=) sparc leon3 gr_cpci_ax2000 gaisler
# Gaisler GRLIB template design (GPL SPARC/LEON3) for Altera NIOS
# Development board Stratix II edition, FPGA Device EP2S60.
gr_ep2s60_config: unconfig
@$(MKCONFIG) $(@:_config=) sparc leon3 gr_ep2s60 gaisler
# Gaisler LEON3 GRSIM simulator
grsim_config : unconfig
@$(MKCONFIG) $(@:_config=) sparc leon3 grsim gaisler
#########################################################################
## LEON2
#########################################################################
# Gaisler LEON2 GRSIM simulator
grsim_leon2_config : unconfig
@$(MKCONFIG) $(@:_config=) sparc leon2 grsim_leon2 gaisler
#########################################################################
#########################################################################
#########################################################################
clean:
@rm -f $(obj)examples/82559_eeprom $(obj)examples/eepro100_eeprom \
$(obj)examples/hello_world $(obj)examples/interrupt \
$(obj)examples/mem_to_mem_idma2intr \
$(obj)examples/sched $(obj)examples/smc91111_eeprom \
$(obj)examples/test_burst $(obj)examples/timer
@rm -f $(obj)tools/bmp_logo $(obj)tools/easylogo/easylogo \
$(obj)tools/env/{fw_printenv,fw_setenv} \
$(obj)tools/envcrc \
$(obj)tools/gdb/{astest,gdbcont,gdbsend} \
$(obj)tools/gen_eth_addr $(obj)tools/img2srec \
$(obj)tools/mkimage $(obj)tools/mpc86x_clk \
$(obj)tools/ncb $(obj)tools/ubsha1
@rm -f $(obj)board/cray/L1/{bootscript.c,bootscript.image} \
$(obj)board/netstar/{eeprom,crcek,crcit,*.srec,*.bin} \
$(obj)board/trab/trab_fkt $(obj)board/voiceblue/eeprom \
$(obj)board/{integratorap,integratorcp}/u-boot.lds \
$(obj)board/{bf533-ezkit,bf533-stamp,bf537-stamp,bf561-ezkit}/u-boot.lds \
$(obj)cpu/blackfin/bootrom-asm-offsets.[chs]
@rm -f $(obj)include/bmp_logo.h
@rm -f $(obj)nand_spl/{u-boot-spl,u-boot-spl.map,System.map}
@rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl-2k.bin,ipl-4k.bin,ipl.map}
@rm -f $(obj)api_examples/demo $(VERSION_FILE)
@find $(OBJTREE) -type f \
\( -name 'core' -o -name '*.bak' -o -name '*~' \
-o -name '*.o' -o -name '*.a' \) -print \
| xargs rm -f
clobber: clean
@find $(OBJTREE) -type f \( -name .depend \
-o -name '*.srec' -o -name '*.bin' -o -name u-boot.img \) \
-print0 \
| xargs -0 rm -f
@rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS \
$(obj)cscope.* $(obj)*.*~
@rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL)
@rm -f $(obj)tools/{crc32.c,environment.c,env/crc32.c,md5.c,sha1.c,inca-swap-bytes}
@rm -f $(obj)tools/{image.c,fdt.c,fdt_ro.c,fdt_rw.c,fdt_strerror.c,zlib.h}
@rm -f $(obj)tools/{fdt_wip.c,libfdt_internal.h}
@rm -f $(obj)cpu/mpc824x/bedbug_603e.c
@rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
@[ ! -d $(obj)nand_spl ] || find $(obj)nand_spl -name "*" -type l -print | xargs rm -f
@[ ! -d $(obj)onenand_ipl ] || find $(obj)onenand_ipl -name "*" -type l -print | xargs rm -f
@[ ! -d $(obj)api_examples ] || find $(obj)api_examples -name "*" -type l -print | xargs rm -f
ifeq ($(OBJTREE),$(SRCTREE))
mrproper \
distclean: clobber unconfig
else
mrproper \
distclean: clobber unconfig
rm -rf $(obj)*
endif
backup:
F=`basename $(TOPDIR)` ; cd .. ; \
gtar --force-local -zcvf `date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
#########################################################################