blob: 5862acdc459fcc284ee21cfdca8c03b0e8665cb3 [file] [log] [blame]
/*
* Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/*
* CPU specific code for the MPC83xx family.
*
* Derived from the MPC8260 and MPC85xx.
*/
#include <common.h>
#include <watchdog.h>
#include <command.h>
#include <mpc83xx.h>
#include <asm/processor.h>
#include <libfdt.h>
#include <tsec.h>
DECLARE_GLOBAL_DATA_PTR;
int checkcpu(void)
{
volatile immap_t *immr;
ulong clock = gd->cpu_clk;
u32 pvr = get_pvr();
u32 spridr;
char buf[32];
int i;
const struct cpu_type {
char name[15];
u32 partid;
} cpu_type_list [] = {
CPU_TYPE_ENTRY(8311),
CPU_TYPE_ENTRY(8313),
CPU_TYPE_ENTRY(8314),
CPU_TYPE_ENTRY(8315),
CPU_TYPE_ENTRY(8321),
CPU_TYPE_ENTRY(8323),
CPU_TYPE_ENTRY(8343),
CPU_TYPE_ENTRY(8347_TBGA_),
CPU_TYPE_ENTRY(8347_PBGA_),
CPU_TYPE_ENTRY(8349),
CPU_TYPE_ENTRY(8358_TBGA_),
CPU_TYPE_ENTRY(8358_PBGA_),
CPU_TYPE_ENTRY(8360),
CPU_TYPE_ENTRY(8377),
CPU_TYPE_ENTRY(8378),
CPU_TYPE_ENTRY(8379),
};
immr = (immap_t *)CFG_IMMR;
puts("CPU: ");
switch (pvr & 0xffff0000) {
case PVR_E300C1:
printf("e300c1, ");
break;
case PVR_E300C2:
printf("e300c2, ");
break;
case PVR_E300C3:
printf("e300c3, ");
break;
case PVR_E300C4:
printf("e300c4, ");
break;
default:
printf("Unknown core, ");
}
spridr = immr->sysconf.spridr;
for (i = 0; i < ARRAY_SIZE(cpu_type_list); i++)
if (cpu_type_list[i].partid == PARTID_NO_E(spridr)) {
puts("MPC");
puts(cpu_type_list[i].name);
if (IS_E_PROCESSOR(spridr))
puts("E");
if (REVID_MAJOR(spridr) >= 2)
puts("A");
printf(", Rev: %d.%d", REVID_MAJOR(spridr),
REVID_MINOR(spridr));
break;
}
if (i == ARRAY_SIZE(cpu_type_list))
printf("(SPRIDR %08x unknown), ", spridr);
printf(" at %s MHz, ", strmhz(buf, clock));
printf("CSB: %s MHz\n", strmhz(buf, gd->csb_clk));
return 0;
}
/*
* Program a UPM with the code supplied in the table.
*
* The 'dummy' variable is used to increment the MAD. 'dummy' is
* supposed to be a pointer to the memory of the device being
* programmed by the UPM. The data in the MDR is written into
* memory and the MAD is incremented every time there's a read
* from 'dummy'. Unfortunately, the current prototype for this
* function doesn't allow for passing the address of this
* device, and changing the prototype will break a number lots
* of other code, so we need to use a round-about way of finding
* the value for 'dummy'.
*
* The value can be extracted from the base address bits of the
* Base Register (BR) associated with the specific UPM. To find
* that BR, we need to scan all 8 BRs until we find the one that
* has its MSEL bits matching the UPM we want. Once we know the
* right BR, we can extract the base address bits from it.
*
* The MxMR and the BR and OR of the chosen bank should all be
* configured before calling this function.
*
* Parameters:
* upm: 0=UPMA, 1=UPMB, 2=UPMC
* table: Pointer to an array of values to program
* size: Number of elements in the array. Must be 64 or less.
*/
void upmconfig (uint upm, uint *table, uint size)
{
#if defined(CONFIG_MPC834X)
volatile immap_t *immap = (immap_t *) CFG_IMMR;
volatile lbus83xx_t *lbus = &immap->lbus;
volatile uchar *dummy = NULL;
const u32 msel = (upm + 4) << BR_MSEL_SHIFT; /* What the MSEL field in BRn should be */
volatile u32 *mxmr = &lbus->mamr + upm; /* Pointer to mamr, mbmr, or mcmr */
uint i;
/* Scan all the banks to determine the base address of the device */
for (i = 0; i < 8; i++) {
if ((lbus->bank[i].br & BR_MSEL) == msel) {
dummy = (uchar *) (lbus->bank[i].br & BR_BA);
break;
}
}
if (!dummy) {
printf("Error: %s() could not find matching BR\n", __FUNCTION__);
hang();
}
/* Set the OP field in the MxMR to "write" and the MAD field to 000000 */
*mxmr = (*mxmr & 0xCFFFFFC0) | 0x10000000;
for (i = 0; i < size; i++) {
lbus->mdr = table[i];
__asm__ __volatile__ ("sync");
*dummy; /* Write the value to memory and increment MAD */
__asm__ __volatile__ ("sync");
}
/* Set the OP field in the MxMR to "normal" and the MAD field to 000000 */
*mxmr &= 0xCFFFFFC0;
#else
printf("Error: %s() not defined for this configuration.\n", __FUNCTION__);
hang();
#endif
}
int
do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
ulong msr;
#ifndef MPC83xx_RESET
ulong addr;
#endif
volatile immap_t *immap = (immap_t *) CFG_IMMR;
#ifdef MPC83xx_RESET
/* Interrupts and MMU off */
__asm__ __volatile__ ("mfmsr %0":"=r" (msr):);
msr &= ~( MSR_EE | MSR_IR | MSR_DR);
__asm__ __volatile__ ("mtmsr %0"::"r" (msr));
/* enable Reset Control Reg */
immap->reset.rpr = 0x52535445;
__asm__ __volatile__ ("sync");
__asm__ __volatile__ ("isync");
/* confirm Reset Control Reg is enabled */
while(!((immap->reset.rcer) & RCER_CRE));
printf("Resetting the board.");
printf("\n");
udelay(200);
/* perform reset, only one bit */
immap->reset.rcr = RCR_SWHR;
#else /* ! MPC83xx_RESET */
immap->reset.rmr = RMR_CSRE; /* Checkstop Reset enable */
/* Interrupts and MMU off */
__asm__ __volatile__ ("mfmsr %0":"=r" (msr):);
msr &= ~(MSR_ME | MSR_EE | MSR_IR | MSR_DR);
__asm__ __volatile__ ("mtmsr %0"::"r" (msr));
/*
* Trying to execute the next instruction at a non-existing address
* should cause a machine check, resulting in reset
*/
addr = CFG_RESET_ADDRESS;
printf("resetting the board.");
printf("\n");
((void (*)(void)) addr) ();
#endif /* MPC83xx_RESET */
return 1;
}
/*
* Get timebase clock frequency (like cpu_clk in Hz)
*/
unsigned long get_tbclk(void)
{
ulong tbclk;
tbclk = (gd->bus_clk + 3L) / 4L;
return tbclk;
}
#if defined(CONFIG_WATCHDOG)
void watchdog_reset (void)
{
int re_enable = disable_interrupts();
/* Reset the 83xx watchdog */
volatile immap_t *immr = (immap_t *) CFG_IMMR;
immr->wdt.swsrr = 0x556c;
immr->wdt.swsrr = 0xaa39;
if (re_enable)
enable_interrupts ();
}
#endif
#if defined(CONFIG_DDR_ECC)
void dma_init(void)
{
volatile immap_t *immap = (immap_t *)CFG_IMMR;
volatile dma83xx_t *dma = &immap->dma;
volatile u32 status = swab32(dma->dmasr0);
volatile u32 dmamr0 = swab32(dma->dmamr0);
debug("DMA-init\n");
/* initialize DMASARn, DMADAR and DMAABCRn */
dma->dmadar0 = (u32)0;
dma->dmasar0 = (u32)0;
dma->dmabcr0 = 0;
__asm__ __volatile__ ("sync");
__asm__ __volatile__ ("isync");
/* clear CS bit */
dmamr0 &= ~DMA_CHANNEL_START;
dma->dmamr0 = swab32(dmamr0);
__asm__ __volatile__ ("sync");
__asm__ __volatile__ ("isync");
/* while the channel is busy, spin */
while(status & DMA_CHANNEL_BUSY) {
status = swab32(dma->dmasr0);
}
debug("DMA-init end\n");
}
uint dma_check(void)
{
volatile immap_t *immap = (immap_t *)CFG_IMMR;
volatile dma83xx_t *dma = &immap->dma;
volatile u32 status = swab32(dma->dmasr0);
volatile u32 byte_count = swab32(dma->dmabcr0);
/* while the channel is busy, spin */
while (status & DMA_CHANNEL_BUSY) {
status = swab32(dma->dmasr0);
}
if (status & DMA_CHANNEL_TRANSFER_ERROR) {
printf ("DMA Error: status = %x @ %d\n", status, byte_count);
}
return status;
}
int dma_xfer(void *dest, u32 count, void *src)
{
volatile immap_t *immap = (immap_t *)CFG_IMMR;
volatile dma83xx_t *dma = &immap->dma;
volatile u32 dmamr0;
/* initialize DMASARn, DMADAR and DMAABCRn */
dma->dmadar0 = swab32((u32)dest);
dma->dmasar0 = swab32((u32)src);
dma->dmabcr0 = swab32(count);
__asm__ __volatile__ ("sync");
__asm__ __volatile__ ("isync");
/* init direct transfer, clear CS bit */
dmamr0 = (DMA_CHANNEL_TRANSFER_MODE_DIRECT |
DMA_CHANNEL_SOURCE_ADDRESS_HOLD_8B |
DMA_CHANNEL_SOURCE_ADRESSS_HOLD_EN);
dma->dmamr0 = swab32(dmamr0);
__asm__ __volatile__ ("sync");
__asm__ __volatile__ ("isync");
/* set CS to start DMA transfer */
dmamr0 |= DMA_CHANNEL_START;
dma->dmamr0 = swab32(dmamr0);
__asm__ __volatile__ ("sync");
__asm__ __volatile__ ("isync");
return ((int)dma_check());
}
#endif /*CONFIG_DDR_ECC*/
/*
* Initializes on-chip ethernet controllers.
* to override, implement board_eth_init()
*/
int cpu_eth_init(bd_t *bis)
{
#if defined(CONFIG_TSEC_ENET)
tsec_standard_init(bis);
#endif
return 0;
}