| /* |
| * Andesboot - Startup Code for Whitiger core |
| * |
| * Copyright (C) 2006 Andes Technology Corporation |
| * Copyright (C) 2006 Shawn Lin <nobuhiro@andestech.com> |
| * Copyright (C) 2011 Macpaul Lin <macpaul@andestech.com> |
| * Greentime Hu <greentime@andestech.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| .pic |
| |
| #include <asm-offsets.h> |
| #include <config.h> |
| #include <common.h> |
| #include <asm/macro.h> |
| |
| /* |
| * Jump vector table for EVIC mode |
| */ |
| #define ENA_DCAC 2UL |
| #define DIS_DCAC ~ENA_DCAC |
| #define ICAC_MEM_KBF_ISET (0x07) ! I Cache sets per way |
| #define ICAC_MEM_KBF_IWAY (0x07<<3) ! I cache ways |
| #define ICAC_MEM_KBF_ISZ (0x07<<6) ! I cache line size |
| #define DCAC_MEM_KBF_DSET (0x07) ! D Cache sets per way |
| #define DCAC_MEM_KBF_DWAY (0x07<<3) ! D cache ways |
| #define DCAC_MEM_KBF_DSZ (0x07<<6) ! D cache line size |
| |
| #define PSW $ir0 |
| #define EIT_INTR_PSW $ir1 ! interruption $PSW |
| #define EIT_PREV_IPSW $ir2 ! previous $IPSW |
| #define EIT_IVB $ir3 ! intr vector base address |
| #define EIT_EVA $ir4 ! MMU related Exception VA reg |
| #define EIT_PREV_EVA $ir5 ! previous $eva |
| #define EIT_ITYPE $ir6 ! interruption type |
| #define EIT_PREV_ITYPE $ir7 ! prev intr type |
| #define EIT_MACH_ERR $ir8 ! machine error log |
| #define EIT_INTR_PC $ir9 ! Interruption PC |
| #define EIT_PREV_IPC $ir10 ! previous $IPC |
| #define EIT_OVL_INTR_PC $ir11 ! overflow interruption PC |
| #define EIT_PREV_P0 $ir12 ! prev $P0 |
| #define EIT_PREV_P1 $ir13 ! prev $p1 |
| #define CR_ICAC_MEM $cr1 ! I-cache/memory config reg |
| #define CR_DCAC_MEM $cr2 ! D-cache/memory config reg |
| #define MR_CAC_CTL $mr8 |
| |
| .globl _start |
| |
| _start: j reset |
| j tlb_fill |
| j tlb_not_present |
| j tlb_misc |
| j tlb_vlpt_miss |
| j machine_error |
| j debug |
| j general_exception |
| j syscall |
| j internal_interrupt ! H0I |
| j internal_interrupt ! H1I |
| j internal_interrupt ! H2I |
| j internal_interrupt ! H3I |
| j internal_interrupt ! H4I |
| j internal_interrupt ! H5I |
| j software_interrupt ! S0I |
| |
| .balign 16 |
| |
| /* |
| * Andesboot Startup Code (reset vector) |
| * |
| * 1. bootstrap |
| * 1.1 reset - start of u-boot |
| * 1.2 to superuser mode - as is when reset |
| * 1.4 Do lowlevel_init |
| * - (this will jump out to lowlevel_init.S in SoC) |
| * - (lowlevel_init) |
| * 1.3 Turn off watchdog timer |
| * - (this will jump out to watchdog.S in SoC) |
| * - (turnoff_watchdog) |
| * 2. Do critical init when reboot (not from mem) |
| * 3. Relocate andesboot to ram |
| * 4. Setup stack |
| * 5. Jump to second stage (board_init_r) |
| */ |
| |
| /* Note: TEXT_BASE is defined by the (board-dependent) linker script */ |
| .globl _TEXT_BASE |
| _TEXT_BASE: |
| .word CONFIG_SYS_TEXT_BASE |
| |
| /* IRQ stack memory (calculated at run-time) + 8 bytes */ |
| .globl IRQ_STACK_START_IN |
| IRQ_STACK_START_IN: |
| .word 0x0badc0de |
| |
| /* |
| * The bootstrap code of nds32 core |
| */ |
| |
| reset: |
| |
| /* |
| * gp = ~0 for burn mode |
| * = ~load_address for load mode |
| */ |
| reset_gp: |
| .relax_hint 0 |
| sethi $gp, hi20(_GLOBAL_OFFSET_TABLE_-8) |
| .relax_hint 0 |
| ori $gp, $gp, lo12(_GLOBAL_OFFSET_TABLE_-4) |
| add5.pc $gp |
| |
| set_ivb: |
| li $r0, 0x0 |
| /* turn on BTB */ |
| mtsr $r0, $misc_ctl |
| /* set IVIC, vector size: 4 bytes, base: 0x0 */ |
| mtsr $r0, $ivb |
| /* |
| * MMU_CTL NTC0 Non-cacheable |
| */ |
| li $r0, ~0x6 |
| mfsr $r1, $mr0 |
| and $r1, $r1, $r0 |
| mtsr $r1, $mr0 |
| |
| li $r0, ~0x3 |
| mfsr $r1, $mr8 |
| and $r1, $r1, $r0 |
| mtsr $r1, $mr8 |
| #if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)) |
| /* |
| * MMU_CTL NTC0 Cacheable/Write-Back |
| */ |
| li $r0, 0x4 |
| mfsr $r1, $mr0 |
| or $r1, $r1, $r0 |
| mtsr $r1, $mr0 |
| #endif |
| |
| #ifndef CONFIG_SYS_DCACHE_OFF |
| #ifdef CONFIG_ARCH_MAP_SYSMEM |
| /* |
| * MMU_CTL NTC1 Non-cacheable |
| */ |
| li $r0, ~0x18 |
| mfsr $r1, $mr0 |
| and $r1, $r1, $r0 |
| mtsr $r1, $mr0 |
| /* |
| * MMU_CTL NTM1 mapping for partition 0 |
| */ |
| li $r0, ~0x6000 |
| mfsr $r1, $mr0 |
| and $r1, $r1, $r0 |
| mtsr $r1, $mr0 |
| #endif |
| #endif |
| |
| #if !defined(CONFIG_SYS_ICACHE_OFF) |
| li $r0, 0x1 |
| mfsr $r1, $mr8 |
| or $r1, $r1, $r0 |
| mtsr $r1, $mr8 |
| #endif |
| |
| #if !defined(CONFIG_SYS_DCACHE_OFF) |
| li $r0, 0x2 |
| mfsr $r1, $mr8 |
| or $r1, $r1, $r0 |
| mtsr $r1, $mr8 |
| #endif |
| |
| jal mem_init |
| |
| #ifndef CONFIG_SKIP_LOWLEVEL_INIT |
| jal lowlevel_init |
| /* |
| * gp = ~VMA for burn mode |
| * = ~load_address for load mode |
| */ |
| update_gp: |
| .relax_hint 0 |
| sethi $gp, hi20(_GLOBAL_OFFSET_TABLE_-8) |
| .relax_hint 0 |
| ori $gp, $gp, lo12(_GLOBAL_OFFSET_TABLE_-4) |
| add5.pc $gp |
| #endif |
| /* |
| * do critical initializations first (shall be in short time) |
| * do self_relocation ASAP. |
| */ |
| |
| /* |
| * Set the N1213 (Whitiger) core to superuser mode |
| * According to spec, it is already when reset |
| */ |
| #ifndef CONFIG_SKIP_TRUNOFF_WATCHDOG |
| jal turnoff_watchdog |
| #endif |
| |
| /* |
| * Do CPU critical regs init only at reboot, |
| * not when booting from ram |
| */ |
| #ifdef CONFIG_INIT_CRITICAL |
| jal cpu_init_crit ! Do CPU critical regs init |
| #endif |
| |
| /* |
| * Set stackpointer in internal RAM to call board_init_f |
| * $sp must be 8-byte alignment for ABI compliance. |
| */ |
| call_board_init_f: |
| li $sp, CONFIG_SYS_INIT_SP_ADDR |
| move $r0, $sp |
| bal board_init_f_alloc_reserve |
| move $sp, $r0 |
| bal board_init_f_init_reserve |
| #ifdef CONFIG_DEBUG_UART |
| bal debug_uart_init |
| #endif |
| li $r0, 0x00000000 |
| #ifdef __PIC__ |
| #ifdef __NDS32_N1213_43U1H__ |
| /* __NDS32_N1213_43U1H__ implies NDS32 V0 ISA */ |
| la $r15, board_init_f ! store function address into $r15 |
| #endif |
| #endif |
| j board_init_f ! jump to board_init_f() in lib/board.c |
| |
| /* |
| * void relocate_code (addr_sp, gd, addr_moni) |
| * |
| * This "function" does not return, instead it continues in RAM |
| * after relocating the monitor code. |
| * |
| */ |
| |
| /* |
| * gp = ~RAM_SIZE - TEXT_SIZE for burn/load mode |
| */ |
| |
| .globl relocate_code |
| relocate_code: |
| move $r4, $r0 /* save addr_sp */ |
| move $r5, $r1 /* save addr of gd */ |
| move $r6, $r2 /* save addr of destination */ |
| |
| /* Set up the stack */ |
| stack_setup: |
| move $sp, $r4 |
| |
| la $r0, _start@GOTOFF |
| beq $r0, $r6, clear_bss /* skip relocation */ |
| |
| la $r1, _end@GOTOFF |
| move $r2, $r6 /* r2 <- scratch for copy_loop */ |
| copy_loop: |
| lmw.bim $r11, [$r0], $r18 |
| smw.bim $r11, [$r2], $r18 |
| blt $r0, $r1, copy_loop |
| /* |
| * fix relocations related issues |
| */ |
| fix_relocations: |
| l.w $r0, _TEXT_BASE@GOTOFF /* r0 <- Text base */ |
| sub $r9, $r6, $r0 /* r9 <- relocation offset */ |
| |
| la $r7, __rel_dyn_start@GOTOFF |
| add $r7, $r7, $r9 /* r2 <- rel __got_start in RAM */ |
| la $r8, __rel_dyn_end@GOTOFF |
| add $r8, $r8, $r9 /* r2 <- rel __got_start in RAM */ |
| li $r3, #0x2a /* R_NDS32_RELATIVE */ |
| 1: |
| lmw.bim $r0, [$r7], $r2 /* r0,r1,r2 <- adr,type,addend */ |
| bne $r1, $r3, 2f |
| |
| add $r0, $r0, $r9 |
| add $r2, $r2, $r9 |
| sw $r2, [$r0] |
| 2: |
| blt $r7, $r8, 1b |
| |
| clear_bss: |
| la $r0, __bss_start@GOTOFF /* r0 <- rel __bss_start in FLASH */ |
| add $r0, $r0, $r9 /* r0 <- rel __bss_start in FLASH */ |
| la $r1, __bss_end@GOTOFF /* r1 <- rel __bss_end in RAM */ |
| add $r1, $r1, $r9 /* r0 <- rel __bss_end in RAM */ |
| li $r2, 0x00000000 /* clear */ |
| |
| clbss_l: |
| sw $r2, [$r0] /* clear loop... */ |
| addi $r0, $r0, #4 |
| bne $r0, $r1, clbss_l |
| |
| /* |
| * We are done. Do not return, instead branch to second part of board |
| * initialization, now running from RAM. |
| */ |
| call_board_init_r: |
| bal invalidate_icache_all |
| bal flush_dcache_all |
| la $r0, board_init_r@GOTOFF |
| move $lp, $r0 /* offset of board_init_r() */ |
| add $lp, $lp, $r9 /* real address of board_init_r() */ |
| /* setup parameters for board_init_r */ |
| move $r0, $r5 /* gd_t */ |
| move $r1, $r6 /* dest_addr */ |
| |
| #ifdef __PIC__ |
| #ifdef __NDS32_N1213_43U1H__ /* NDS32 V0 ISA */ |
| move $r15, $lp /* store function address into $r15 */ |
| #endif |
| #endif |
| |
| /* jump to it ... */ |
| jr $lp /* jump to board_init_r() */ |
| |
| /* |
| * Initialize CPU critical registers |
| * |
| * 1. Setup control registers |
| * 1.1 Mask all IRQs |
| * 1.2 Flush cache and TLB |
| * 1.3 Disable MMU and cache |
| * 2. Setup memory timing |
| */ |
| |
| cpu_init_crit: |
| |
| move $r0, $lp /* push ra */ |
| |
| /* Disable Interrupts by clear GIE in $PSW reg */ |
| setgie.d |
| |
| /* Flush caches and TLB */ |
| /* Invalidate caches */ |
| jal invalidate_icac |
| jal invalidate_dcac |
| |
| /* Flush TLB */ |
| mfsr $p0, $MMU_CFG |
| andi $p0, $p0, 0x3 ! MMPS |
| li $p1, 0x2 ! TLB MMU |
| bne $p0, $p1, 1f |
| tlbop flushall ! Flush TLB |
| |
| 1: |
| ! Disable MMU, Dcache |
| ! Whitiger is MMU disabled when reset |
| ! Disable the D$ |
| mfsr $p0, MR_CAC_CTL ! Get the $CACHE_CTL reg |
| li $p1, DIS_DCAC |
| and $p0, $p0, $p1 ! Set DC_EN bit |
| mtsr $p0, MR_CAC_CTL ! write back the $CACHE_CTL reg |
| isb |
| |
| move $lp, $r0 |
| 2: |
| ret |
| |
| /* |
| * Invalidate I$ |
| */ |
| invalidate_icac: |
| ! read $cr1(I CAC/MEM cfg. reg.) configuration |
| mfsr $t0, CR_ICAC_MEM |
| |
| ! Get the ISZ field |
| andi $p0, $t0, ICAC_MEM_KBF_ISZ |
| |
| ! if $p0=0, then no I CAC existed |
| beqz $p0, end_flush_icache |
| |
| ! get $p0 the index of I$ block |
| srli $p0, $p0, 6 |
| |
| ! $t1= bit width of I cache line size(ISZ) |
| addi $t1, $p0, 2 |
| |
| li $t4, 1 |
| sll $t5, $t4, $t1 ! get $t5 cache line size |
| andi $p1, $t0, ICAC_MEM_KBF_ISET ! get the ISET field |
| addi $t2, $p1, 6 ! $t2= bit width of ISET |
| andi $p1, $t0, ICAC_MEM_KBF_IWAY ! get bitfield of Iway |
| srli $p1, $p1, 3 |
| addi $p1, $p1, 1 ! then $p1 is I way number |
| add $t3, $t2, $t1 ! SHIFT |
| sll $p1, $p1, $t3 ! GET the total cache size |
| ICAC_LOOP: |
| sub $p1, $p1, $t5 |
| cctl $p1, L1I_IX_INVAL |
| bnez $p1, ICAC_LOOP |
| end_flush_icache: |
| ret |
| |
| /* |
| * Invalidate D$ |
| */ |
| invalidate_dcac: |
| ! read $cr2(D CAC/MEM cfg. reg.) configuration |
| mfsr $t0, CR_DCAC_MEM |
| |
| ! Get the DSZ field |
| andi $p0, $t0, DCAC_MEM_KBF_DSZ |
| |
| ! if $p0=0, then no D CAC existed |
| beqz $p0, end_flush_dcache |
| |
| ! get $p0 the index of D$ block |
| srli $p0, $p0, 6 |
| |
| ! $t1= bit width of D cache line size(DSZ) |
| addi $t1, $p0, 2 |
| |
| li $t4, 1 |
| sll $t5, $t4, $t1 ! get $t5 cache line size |
| andi $p1, $t0, DCAC_MEM_KBF_DSET ! get the DSET field |
| addi $t2, $p1, 6 ! $t2= bit width of DSET |
| andi $p1, $t0, DCAC_MEM_KBF_DWAY ! get bitfield of D way |
| srli $p1, $p1, 3 |
| addi $p1, $p1, 1 ! then $p1 is D way number |
| add $t3, $t2, $t1 ! SHIFT |
| sll $p1, $p1, $t3 ! GET the total cache size |
| DCAC_LOOP: |
| sub $p1, $p1, $t5 |
| cctl $p1, L1D_IX_INVAL |
| bnez $p1, DCAC_LOOP |
| end_flush_dcache: |
| ret |
| |
| /* |
| * Interrupt handling |
| */ |
| |
| /* |
| * exception handlers |
| */ |
| .align 5 |
| |
| .macro SAVE_ALL |
| ! FIXME: Other way to get PC? |
| ! FIXME: Update according to the newest spec!! |
| 1: |
| li $r28, 1 |
| push $r28 |
| mfsr $r28, PSW ! $PSW |
| push $r28 |
| mfsr $r28, EIT_EVA ! $ir1 $EVA |
| push $r28 |
| mfsr $r28, EIT_ITYPE ! $ir2 $ITYPE |
| push $r28 |
| mfsr $r28, EIT_MACH_ERR ! $ir3 Mach Error |
| push $r28 |
| mfsr $r28, EIT_INTR_PSW ! $ir5 $IPSW |
| push $r28 |
| mfsr $r28, EIT_PREV_IPSW ! $ir6 prev $IPSW |
| push $r28 |
| mfsr $r28, EIT_PREV_EVA ! $ir7 prev $EVA |
| push $r28 |
| mfsr $r28, EIT_PREV_ITYPE ! $ir8 prev $ITYPE |
| push $r28 |
| mfsr $r28, EIT_INTR_PC ! $ir9 Interruption PC |
| push $r28 |
| mfsr $r28, EIT_PREV_IPC ! $ir10 prev INTR_PC |
| push $r28 |
| mfsr $r28, EIT_OVL_INTR_PC ! $ir11 Overflowed INTR_PC |
| push $r28 |
| mfusr $r28, $d1.lo |
| push $r28 |
| mfusr $r28, $d1.hi |
| push $r28 |
| mfusr $r28, $d0.lo |
| push $r28 |
| mfusr $r28, $d0.hi |
| push $r28 |
| pushm $r0, $r30 ! store $sp-$r31, ra-$r30, $gp-$r29, $r28-$fp |
| addi $sp, $sp, -4 ! make room for implicit pt_regs parameters |
| .endm |
| |
| .align 5 |
| tlb_fill: |
| SAVE_ALL |
| move $r0, $sp ! To get the kernel stack |
| li $r1, 1 ! Determine interruption type |
| bal do_interruption |
| |
| .align 5 |
| tlb_not_present: |
| SAVE_ALL |
| move $r0, $sp ! To get the kernel stack |
| li $r1, 2 ! Determine interruption type |
| bal do_interruption |
| |
| .align 5 |
| tlb_misc: |
| SAVE_ALL |
| move $r0, $sp ! To get the kernel stack |
| li $r1, 3 ! Determine interruption type |
| bal do_interruption |
| |
| .align 5 |
| tlb_vlpt_miss: |
| SAVE_ALL |
| move $r0, $sp ! To get the kernel stack |
| li $r1, 4 ! Determine interruption type |
| bal do_interruption |
| |
| .align 5 |
| machine_error: |
| SAVE_ALL |
| move $r0, $sp ! To get the kernel stack |
| li $r1, 5 ! Determine interruption type |
| bal do_interruption |
| |
| .align 5 |
| debug: |
| SAVE_ALL |
| move $r0, $sp ! To get the kernel stack |
| li $r1, 6 ! Determine interruption type |
| bal do_interruption |
| |
| .align 5 |
| general_exception: |
| SAVE_ALL |
| move $r0, $sp ! To get the kernel stack |
| li $r1, 7 ! Determine interruption type |
| bal do_interruption |
| |
| .align 5 |
| syscall: |
| SAVE_ALL |
| move $r0, $sp ! To get the kernel stack |
| li $r1, 8 ! Determine interruption type |
| bal do_interruption |
| |
| .align 5 |
| internal_interrupt: |
| SAVE_ALL |
| move $r0, $sp ! To get the kernel stack |
| li $r1, 9 ! Determine interruption type |
| bal do_interruption |
| |
| .align 5 |
| software_interrupt: |
| SAVE_ALL |
| move $r0, $sp ! To get the kernel stack |
| li $r1, 10 ! Determine interruption type |
| bal do_interruption |
| |
| .align 5 |
| |
| /* |
| * void reset_cpu(ulong addr); |
| * $r0: input address to jump to |
| */ |
| .globl reset_cpu |
| reset_cpu: |
| /* No need to disable MMU because we never enable it */ |
| |
| bal invalidate_icac |
| bal invalidate_dcac |
| mfsr $p0, $MMU_CFG |
| andi $p0, $p0, 0x3 ! MMPS |
| li $p1, 0x2 ! TLB MMU |
| bne $p0, $p1, 1f |
| tlbop flushall ! Flush TLB |
| 1: |
| mfsr $p0, MR_CAC_CTL ! Get the $CACHE_CTL reg |
| li $p1, DIS_DCAC |
| and $p0, $p0, $p1 ! Clear the DC_EN bit |
| mtsr $p0, MR_CAC_CTL ! Write back the $CACHE_CTL reg |
| br $r0 ! Jump to the input address |