| /* |
| * dfu_nand.c -- DFU for NAND routines. |
| * |
| * Copyright (C) 2012-2013 Texas Instruments, Inc. |
| * |
| * Based on dfu_mmc.c which is: |
| * Copyright (C) 2012 Samsung Electronics |
| * author: Lukasz Majewski <l.majewski@samsung.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <malloc.h> |
| #include <errno.h> |
| #include <div64.h> |
| #include <dfu.h> |
| #include <linux/mtd/mtd.h> |
| #include <jffs2/load_kernel.h> |
| #include <nand.h> |
| |
| static int nand_block_op(enum dfu_op op, struct dfu_entity *dfu, |
| u64 offset, void *buf, long *len) |
| { |
| loff_t start, lim; |
| size_t count, actual; |
| int ret; |
| struct mtd_info *mtd; |
| |
| /* if buf == NULL return total size of the area */ |
| if (buf == NULL) { |
| *len = dfu->data.nand.size; |
| return 0; |
| } |
| |
| start = dfu->data.nand.start + offset + dfu->bad_skip; |
| lim = dfu->data.nand.start + dfu->data.nand.size - start; |
| count = *len; |
| |
| mtd = get_nand_dev_by_index(nand_curr_device); |
| |
| if (nand_curr_device < 0 || |
| nand_curr_device >= CONFIG_SYS_MAX_NAND_DEVICE || |
| !mtd) { |
| printf("%s: invalid nand device\n", __func__); |
| return -1; |
| } |
| |
| if (op == DFU_OP_READ) { |
| ret = nand_read_skip_bad(mtd, start, &count, &actual, |
| lim, buf); |
| } else { |
| nand_erase_options_t opts; |
| |
| memset(&opts, 0, sizeof(opts)); |
| opts.offset = start; |
| opts.length = count; |
| opts.spread = 1; |
| opts.quiet = 1; |
| opts.lim = lim; |
| /* first erase */ |
| ret = nand_erase_opts(mtd, &opts); |
| if (ret) |
| return ret; |
| /* then write */ |
| ret = nand_write_skip_bad(mtd, start, &count, &actual, |
| lim, buf, WITH_WR_VERIFY); |
| } |
| |
| if (ret != 0) { |
| printf("%s: nand_%s_skip_bad call failed at %llx!\n", |
| __func__, op == DFU_OP_READ ? "read" : "write", |
| start); |
| return ret; |
| } |
| |
| /* |
| * Find out where we stopped writing data. This can be deeper into |
| * the NAND than we expected due to having to skip bad blocks. So |
| * we must take this into account for the next write, if any. |
| */ |
| if (actual > count) |
| dfu->bad_skip += actual - count; |
| |
| return ret; |
| } |
| |
| static inline int nand_block_write(struct dfu_entity *dfu, |
| u64 offset, void *buf, long *len) |
| { |
| return nand_block_op(DFU_OP_WRITE, dfu, offset, buf, len); |
| } |
| |
| static inline int nand_block_read(struct dfu_entity *dfu, |
| u64 offset, void *buf, long *len) |
| { |
| return nand_block_op(DFU_OP_READ, dfu, offset, buf, len); |
| } |
| |
| static int dfu_write_medium_nand(struct dfu_entity *dfu, |
| u64 offset, void *buf, long *len) |
| { |
| int ret = -1; |
| |
| switch (dfu->layout) { |
| case DFU_RAW_ADDR: |
| ret = nand_block_write(dfu, offset, buf, len); |
| break; |
| default: |
| printf("%s: Layout (%s) not (yet) supported!\n", __func__, |
| dfu_get_layout(dfu->layout)); |
| } |
| |
| return ret; |
| } |
| |
| long dfu_get_medium_size_nand(struct dfu_entity *dfu) |
| { |
| return dfu->data.nand.size; |
| } |
| |
| static int dfu_read_medium_nand(struct dfu_entity *dfu, u64 offset, void *buf, |
| long *len) |
| { |
| int ret = -1; |
| |
| switch (dfu->layout) { |
| case DFU_RAW_ADDR: |
| ret = nand_block_read(dfu, offset, buf, len); |
| break; |
| default: |
| printf("%s: Layout (%s) not (yet) supported!\n", __func__, |
| dfu_get_layout(dfu->layout)); |
| } |
| |
| return ret; |
| } |
| |
| static int dfu_flush_medium_nand(struct dfu_entity *dfu) |
| { |
| int ret = 0; |
| u64 off; |
| |
| /* in case of ubi partition, erase rest of the partition */ |
| if (dfu->data.nand.ubi) { |
| struct mtd_info *mtd = get_nand_dev_by_index(nand_curr_device); |
| nand_erase_options_t opts; |
| |
| if (nand_curr_device < 0 || |
| nand_curr_device >= CONFIG_SYS_MAX_NAND_DEVICE || |
| !mtd) { |
| printf("%s: invalid nand device\n", __func__); |
| return -1; |
| } |
| |
| memset(&opts, 0, sizeof(opts)); |
| off = dfu->offset; |
| if ((off & (mtd->erasesize - 1)) != 0) { |
| /* |
| * last write ended with unaligned length |
| * sector is erased, jump to next |
| */ |
| off = off & ~((mtd->erasesize - 1)); |
| off += mtd->erasesize; |
| } |
| opts.offset = dfu->data.nand.start + off + |
| dfu->bad_skip; |
| opts.length = dfu->data.nand.start + |
| dfu->data.nand.size - opts.offset; |
| ret = nand_erase_opts(mtd, &opts); |
| if (ret != 0) |
| printf("Failure erase: %d\n", ret); |
| } |
| |
| return ret; |
| } |
| |
| unsigned int dfu_polltimeout_nand(struct dfu_entity *dfu) |
| { |
| /* |
| * Currently, Poll Timeout != 0 is only needed on nand |
| * ubi partition, as the not used sectors need an erase |
| */ |
| if (dfu->data.nand.ubi) |
| return DFU_MANIFEST_POLL_TIMEOUT; |
| |
| return DFU_DEFAULT_POLL_TIMEOUT; |
| } |
| |
| int dfu_fill_entity_nand(struct dfu_entity *dfu, char *devstr, char *s) |
| { |
| char *st; |
| int ret, dev, part; |
| |
| dfu->data.nand.ubi = 0; |
| dfu->dev_type = DFU_DEV_NAND; |
| st = strsep(&s, " "); |
| if (!strcmp(st, "raw")) { |
| dfu->layout = DFU_RAW_ADDR; |
| dfu->data.nand.start = simple_strtoul(s, &s, 16); |
| s++; |
| dfu->data.nand.size = simple_strtoul(s, &s, 16); |
| } else if ((!strcmp(st, "part")) || (!strcmp(st, "partubi"))) { |
| char mtd_id[32]; |
| struct mtd_device *mtd_dev; |
| u8 part_num; |
| struct part_info *pi; |
| |
| dfu->layout = DFU_RAW_ADDR; |
| |
| dev = simple_strtoul(s, &s, 10); |
| s++; |
| part = simple_strtoul(s, &s, 10); |
| |
| sprintf(mtd_id, "%s%d,%d", "nand", dev, part - 1); |
| printf("using id '%s'\n", mtd_id); |
| |
| mtdparts_init(); |
| |
| ret = find_dev_and_part(mtd_id, &mtd_dev, &part_num, &pi); |
| if (ret != 0) { |
| printf("Could not locate '%s'\n", mtd_id); |
| return -1; |
| } |
| |
| dfu->data.nand.start = pi->offset; |
| dfu->data.nand.size = pi->size; |
| if (!strcmp(st, "partubi")) |
| dfu->data.nand.ubi = 1; |
| } else { |
| printf("%s: Memory layout (%s) not supported!\n", __func__, st); |
| return -1; |
| } |
| |
| dfu->get_medium_size = dfu_get_medium_size_nand; |
| dfu->read_medium = dfu_read_medium_nand; |
| dfu->write_medium = dfu_write_medium_nand; |
| dfu->flush_medium = dfu_flush_medium_nand; |
| dfu->poll_timeout = dfu_polltimeout_nand; |
| |
| /* initial state */ |
| dfu->inited = 0; |
| |
| return 0; |
| } |