blob: 3289f286f05cec9e0e56117ef25bb34dbb829202 [file] [log] [blame]
/*
* DENX M53 module
*
* Copyright (C) 2012-2013 Marek Vasut <marex@denx.de>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/mx5x_pins.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/crm_regs.h>
#include <asm/arch/clock.h>
#include <asm/arch/iomux.h>
#include <asm/arch/spl.h>
#include <asm/errno.h>
#include <netdev.h>
#include <i2c.h>
#include <mmc.h>
#include <spl.h>
#include <fsl_esdhc.h>
#include <asm/gpio.h>
#include <usb/ehci-fsl.h>
DECLARE_GLOBAL_DATA_PTR;
int dram_init(void)
{
u32 size1, size2;
size1 = get_ram_size((void *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE);
size2 = get_ram_size((void *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE);
gd->ram_size = size1 + size2;
return 0;
}
void dram_init_banksize(void)
{
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
}
static void setup_iomux_uart(void)
{
mxc_request_iomux(MX53_PIN_ATA_BUFFER_EN, IOMUX_CONFIG_ALT3);
mxc_request_iomux(MX53_PIN_ATA_DMARQ, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX53_PIN_ATA_BUFFER_EN,
PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH |
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
PAD_CTL_HYS_ENABLE);
mxc_iomux_set_pad(MX53_PIN_ATA_DMARQ,
PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH |
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
PAD_CTL_HYS_ENABLE);
mxc_iomux_set_input(MX53_UART2_IPP_UART_RXD_MUX_SELECT_INPUT, 0x3);
}
#ifdef CONFIG_USB_EHCI_MX5
int board_ehci_hcd_init(int port)
{
if (port == 0) {
/* USB OTG PWRON */
mxc_request_iomux(MX53_PIN_GPIO_4, IOMUX_CONFIG_ALT1);
mxc_iomux_set_pad(MX53_PIN_GPIO_4,
PAD_CTL_PKE_ENABLE |
PAD_CTL_100K_PD |
PAD_CTL_DRV_HIGH
);
gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_GPIO_4), 0);
/* USB OTG Over Current */
mxc_request_iomux(MX53_PIN_GPIO_18, IOMUX_CONFIG_ALT1);
mxc_iomux_set_input(MX53_USBOH3_IPP_IND_OTG_OC_SELECT_INPUT, 1);
} else if (port == 1) {
/* USB Host PWRON */
mxc_request_iomux(MX53_PIN_GPIO_2, IOMUX_CONFIG_ALT1);
mxc_iomux_set_pad(MX53_PIN_GPIO_2,
PAD_CTL_PKE_ENABLE |
PAD_CTL_100K_PD |
PAD_CTL_DRV_HIGH
);
gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_GPIO_2), 0);
/* USB Host Over Current */
mxc_request_iomux(MX53_PIN_GPIO_3, IOMUX_CONFIG_ALT6);
mxc_iomux_set_input(MX53_USBOH3_IPP_IND_UH1_OC_SELECT_INPUT, 1);
}
return 0;
}
#endif
static void setup_iomux_fec(void)
{
/* MDIO IOMUX */
mxc_request_iomux(MX53_PIN_FEC_MDIO, IOMUX_CONFIG_ALT0);
mxc_request_iomux(MX53_PIN_FEC_MDC, IOMUX_CONFIG_ALT0);
/* FEC 0 IOMUX */
mxc_request_iomux(MX53_PIN_FEC_CRS_DV, IOMUX_CONFIG_ALT0);
mxc_request_iomux(MX53_PIN_FEC_REF_CLK, IOMUX_CONFIG_ALT0);
mxc_request_iomux(MX53_PIN_FEC_RX_ER, IOMUX_CONFIG_ALT0);
mxc_request_iomux(MX53_PIN_FEC_TX_EN, IOMUX_CONFIG_ALT0);
mxc_request_iomux(MX53_PIN_FEC_RXD0, IOMUX_CONFIG_ALT0);
mxc_request_iomux(MX53_PIN_FEC_RXD1, IOMUX_CONFIG_ALT0);
mxc_request_iomux(MX53_PIN_FEC_TXD0, IOMUX_CONFIG_ALT0);
mxc_request_iomux(MX53_PIN_FEC_TXD1, IOMUX_CONFIG_ALT0);
/* FEC 1 IOMUX */
mxc_request_iomux(MX53_PIN_KEY_COL0, IOMUX_CONFIG_ALT6); /* RXD3 */
mxc_request_iomux(MX53_PIN_KEY_ROW0, IOMUX_CONFIG_ALT6); /* TX_ER */
mxc_request_iomux(MX53_PIN_KEY_COL1, IOMUX_CONFIG_ALT6); /* RX_CLK */
mxc_request_iomux(MX53_PIN_KEY_ROW1, IOMUX_CONFIG_ALT6); /* COL */
mxc_request_iomux(MX53_PIN_KEY_COL2, IOMUX_CONFIG_ALT6); /* RXD2 */
mxc_request_iomux(MX53_PIN_KEY_ROW2, IOMUX_CONFIG_ALT6); /* TXD2 */
mxc_request_iomux(MX53_PIN_KEY_COL3, IOMUX_CONFIG_ALT6); /* CRS */
mxc_request_iomux(MX53_PIN_GPIO_19, IOMUX_CONFIG_ALT6); /* TXD3 */
/* MDIO PADs */
mxc_iomux_set_pad(MX53_PIN_FEC_MDIO,
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
PAD_CTL_22K_PU | PAD_CTL_ODE_OPENDRAIN_ENABLE);
mxc_iomux_set_input(MX53_FEC_FEC_MDI_SELECT_INPUT, 0x1);
mxc_iomux_set_pad(MX53_PIN_FEC_MDC, PAD_CTL_DRV_HIGH);
/* FEC 0 PADs */
mxc_iomux_set_pad(MX53_PIN_FEC_CRS_DV,
PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
mxc_iomux_set_pad(MX53_PIN_FEC_REF_CLK,
PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
mxc_iomux_set_pad(MX53_PIN_FEC_RX_ER,
PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
mxc_iomux_set_pad(MX53_PIN_FEC_TX_EN, PAD_CTL_DRV_HIGH);
mxc_iomux_set_pad(MX53_PIN_FEC_RXD0,
PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
mxc_iomux_set_pad(MX53_PIN_FEC_RXD1,
PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
mxc_iomux_set_pad(MX53_PIN_FEC_TXD0, PAD_CTL_DRV_HIGH);
mxc_iomux_set_pad(MX53_PIN_FEC_TXD1, PAD_CTL_DRV_HIGH);
/* FEC 1 PADs */
mxc_iomux_set_pad(MX53_PIN_KEY_COL0, /* RXD3 */
PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
mxc_iomux_set_pad(MX53_PIN_KEY_ROW0, /* TX_ER */
PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
mxc_iomux_set_pad(MX53_PIN_KEY_COL1, /* RX_CLK */
PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
mxc_iomux_set_pad(MX53_PIN_KEY_ROW1, /* COL */
PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
mxc_iomux_set_pad(MX53_PIN_KEY_COL2, /* RXD2 */
PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
mxc_iomux_set_pad(MX53_PIN_KEY_ROW2, /* TXD2 */
PAD_CTL_DRV_HIGH);
mxc_iomux_set_pad(MX53_PIN_KEY_COL3, /* CRS */
PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
mxc_iomux_set_pad(MX53_PIN_GPIO_19, /* TXD3 */
PAD_CTL_DRV_HIGH);
}
#ifdef CONFIG_FSL_ESDHC
struct fsl_esdhc_cfg esdhc_cfg = {
MMC_SDHC1_BASE_ADDR,
};
int board_mmc_getcd(struct mmc *mmc)
{
mxc_request_iomux(MX53_PIN_GPIO_1, IOMUX_CONFIG_ALT1);
gpio_direction_input(IMX_GPIO_NR(1, 1));
return !gpio_get_value(IMX_GPIO_NR(1, 1));
}
int board_mmc_init(bd_t *bis)
{
esdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
mxc_request_iomux(MX53_PIN_SD1_CMD, IOMUX_CONFIG_ALT0);
mxc_request_iomux(MX53_PIN_SD1_CLK, IOMUX_CONFIG_ALT0);
mxc_request_iomux(MX53_PIN_SD1_DATA0,
IOMUX_CONFIG_ALT0);
mxc_request_iomux(MX53_PIN_SD1_DATA1,
IOMUX_CONFIG_ALT0);
mxc_request_iomux(MX53_PIN_SD1_DATA2,
IOMUX_CONFIG_ALT0);
mxc_request_iomux(MX53_PIN_SD1_DATA3,
IOMUX_CONFIG_ALT0);
mxc_request_iomux(MX53_PIN_EIM_DA13,
IOMUX_CONFIG_ALT1);
mxc_iomux_set_pad(MX53_PIN_SD1_CMD,
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU);
mxc_iomux_set_pad(MX53_PIN_SD1_CLK,
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
PAD_CTL_DRV_HIGH);
mxc_iomux_set_pad(MX53_PIN_SD1_DATA0,
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
mxc_iomux_set_pad(MX53_PIN_SD1_DATA1,
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
mxc_iomux_set_pad(MX53_PIN_SD1_DATA2,
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
mxc_iomux_set_pad(MX53_PIN_SD1_DATA3,
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
/* GPIO 2_31 is SD power */
mxc_request_iomux(MX53_PIN_EIM_EB3, IOMUX_CONFIG_ALT1);
gpio_direction_output(IMX_GPIO_NR(2, 31), 0);
return fsl_esdhc_initialize(bis, &esdhc_cfg);
}
#endif
static void setup_iomux_i2c(void)
{
mxc_request_iomux(MX53_PIN_EIM_D16,
IOMUX_CONFIG_ALT5 | IOMUX_CONFIG_SION);
mxc_request_iomux(MX53_PIN_EIM_EB2,
IOMUX_CONFIG_ALT5 | IOMUX_CONFIG_SION);
mxc_iomux_set_pad(MX53_PIN_EIM_D16,
PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH |
PAD_CTL_100K_PU | PAD_CTL_PKE_ENABLE |
PAD_CTL_PUE_PULL |
PAD_CTL_ODE_OPENDRAIN_ENABLE);
mxc_iomux_set_pad(MX53_PIN_EIM_EB2,
PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH |
PAD_CTL_100K_PU | PAD_CTL_PKE_ENABLE |
PAD_CTL_PUE_PULL |
PAD_CTL_ODE_OPENDRAIN_ENABLE);
mxc_iomux_set_input(MX53_I2C2_IPP_SDA_IN_SELECT_INPUT, 0x1);
mxc_iomux_set_input(MX53_I2C2_IPP_SCL_IN_SELECT_INPUT, 0x1);
}
static void setup_iomux_nand(void)
{
mxc_request_iomux(MX53_PIN_NANDF_WE_B, IOMUX_CONFIG_ALT0);
mxc_request_iomux(MX53_PIN_NANDF_RE_B, IOMUX_CONFIG_ALT0);
mxc_request_iomux(MX53_PIN_NANDF_CLE, IOMUX_CONFIG_ALT0);
mxc_request_iomux(MX53_PIN_NANDF_ALE, IOMUX_CONFIG_ALT0);
mxc_request_iomux(MX53_PIN_NANDF_WP_B, IOMUX_CONFIG_ALT0);
mxc_request_iomux(MX53_PIN_NANDF_RB0, IOMUX_CONFIG_ALT0);
mxc_request_iomux(MX53_PIN_NANDF_CS0, IOMUX_CONFIG_ALT0);
mxc_request_iomux(MX53_PIN_ATA_DATA0, IOMUX_CONFIG_ALT3);
mxc_request_iomux(MX53_PIN_ATA_DATA1, IOMUX_CONFIG_ALT3);
mxc_request_iomux(MX53_PIN_ATA_DATA2, IOMUX_CONFIG_ALT3);
mxc_request_iomux(MX53_PIN_ATA_DATA3, IOMUX_CONFIG_ALT3);
mxc_request_iomux(MX53_PIN_ATA_DATA4, IOMUX_CONFIG_ALT3);
mxc_request_iomux(MX53_PIN_ATA_DATA5, IOMUX_CONFIG_ALT3);
mxc_request_iomux(MX53_PIN_ATA_DATA6, IOMUX_CONFIG_ALT3);
mxc_request_iomux(MX53_PIN_ATA_DATA7, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX53_PIN_NANDF_WE_B, PAD_CTL_DRV_HIGH);
mxc_iomux_set_pad(MX53_PIN_NANDF_RE_B, PAD_CTL_DRV_HIGH);
mxc_iomux_set_pad(MX53_PIN_NANDF_CLE, PAD_CTL_DRV_HIGH);
mxc_iomux_set_pad(MX53_PIN_NANDF_ALE, PAD_CTL_DRV_HIGH);
mxc_iomux_set_pad(MX53_PIN_NANDF_WP_B, PAD_CTL_PUE_PULL |
PAD_CTL_100K_PU | PAD_CTL_PKE_ENABLE);
mxc_iomux_set_pad(MX53_PIN_NANDF_RB0, PAD_CTL_PUE_PULL |
PAD_CTL_100K_PU | PAD_CTL_PKE_ENABLE);
mxc_iomux_set_pad(MX53_PIN_NANDF_CS0, PAD_CTL_DRV_HIGH);
mxc_iomux_set_pad(MX53_PIN_ATA_DATA0, PAD_CTL_DRV_HIGH |
PAD_CTL_100K_PU | PAD_CTL_PKE_ENABLE);
mxc_iomux_set_pad(MX53_PIN_ATA_DATA1, PAD_CTL_DRV_HIGH |
PAD_CTL_100K_PU | PAD_CTL_PKE_ENABLE);
mxc_iomux_set_pad(MX53_PIN_ATA_DATA2, PAD_CTL_DRV_HIGH |
PAD_CTL_100K_PU | PAD_CTL_PKE_ENABLE);
mxc_iomux_set_pad(MX53_PIN_ATA_DATA3, PAD_CTL_DRV_HIGH |
PAD_CTL_100K_PU | PAD_CTL_PKE_ENABLE);
mxc_iomux_set_pad(MX53_PIN_ATA_DATA4, PAD_CTL_DRV_HIGH |
PAD_CTL_100K_PU | PAD_CTL_PKE_ENABLE);
mxc_iomux_set_pad(MX53_PIN_ATA_DATA5, PAD_CTL_DRV_HIGH |
PAD_CTL_100K_PU | PAD_CTL_PKE_ENABLE);
mxc_iomux_set_pad(MX53_PIN_ATA_DATA6, PAD_CTL_DRV_HIGH |
PAD_CTL_100K_PU | PAD_CTL_PKE_ENABLE);
mxc_iomux_set_pad(MX53_PIN_ATA_DATA7, PAD_CTL_DRV_HIGH |
PAD_CTL_100K_PU | PAD_CTL_PKE_ENABLE);
}
static void m53_set_clock(void)
{
int ret;
const uint32_t ref_clk = MXC_HCLK;
const uint32_t dramclk = 400;
uint32_t cpuclk;
mxc_request_iomux(MX53_PIN_GPIO_10, IOMUX_CONFIG_GPIO);
mxc_iomux_set_pad(MX53_PIN_GPIO_10, PAD_CTL_DRV_HIGH |
PAD_CTL_100K_PU | PAD_CTL_PKE_ENABLE);
gpio_direction_input(IOMUX_TO_GPIO(MX53_PIN_GPIO_10));
/* GPIO10 selects modules' CPU speed, 1 = 1200MHz ; 0 = 800MHz */
cpuclk = gpio_get_value(IOMUX_TO_GPIO(MX53_PIN_GPIO_10)) ? 1200 : 800;
ret = mxc_set_clock(ref_clk, cpuclk, MXC_ARM_CLK);
if (ret)
printf("CPU: Switch CPU clock to %dMHz failed\n", cpuclk);
ret = mxc_set_clock(ref_clk, dramclk, MXC_PERIPH_CLK);
if (ret) {
printf("CPU: Switch peripheral clock to %dMHz failed\n",
dramclk);
}
ret = mxc_set_clock(ref_clk, dramclk, MXC_DDR_CLK);
if (ret)
printf("CPU: Switch DDR clock to %dMHz failed\n", dramclk);
}
static void m53_set_nand(void)
{
u32 i;
/* NAND flash is muxed on ATA pins */
setbits_le32(M4IF_BASE_ADDR + 0xc, M4IF_GENP_WEIM_MM_MASK);
/* Wait for Grant/Ack sequence (see EIM_CSnGCR2:MUX16_BYP_GRANT) */
for (i = 0x4; i < 0x94; i += 0x18) {
clrbits_le32(WEIM_BASE_ADDR + i,
WEIM_GCR2_MUX16_BYP_GRANT_MASK);
}
mxc_set_clock(0, 33, MXC_NFC_CLK);
enable_nfc_clk(1);
}
int board_early_init_f(void)
{
setup_iomux_uart();
setup_iomux_fec();
setup_iomux_i2c();
setup_iomux_nand();
m53_set_clock();
mxc_set_sata_internal_clock();
/* NAND clock @ 33MHz */
m53_set_nand();
return 0;
}
int board_init(void)
{
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
return 0;
}
int checkboard(void)
{
puts("Board: DENX M53EVK\n");
return 0;
}
/*
* NAND SPL
*/
#ifdef CONFIG_SPL_BUILD
void spl_board_init(void)
{
setup_iomux_nand();
m53_set_clock();
m53_set_nand();
}
u32 spl_boot_device(void)
{
return BOOT_DEVICE_NAND;
}
#endif