| /* |
| * (C) Copyright 2002 |
| * Brad Kemp, Seranoa Networks, Brad.Kemp@seranoa.com |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #include <asm/processor.h> |
| |
| #undef DEBUG_FLASH |
| /* |
| * This file implements a Common Flash Interface (CFI) driver for ppcboot. |
| * The width of the port and the width of the chips are determined at initialization. |
| * These widths are used to calculate the address for access CFI data structures. |
| * It has been tested on an Intel Strataflash implementation. |
| * |
| * References |
| * JEDEC Standard JESD68 - Common Flash Interface (CFI) |
| * JEDEC Standard JEP137-A Common Flash Interface (CFI) ID Codes |
| * Intel Application Note 646 Common Flash Interface (CFI) and Command Sets |
| * Intel 290667-008 3 Volt Intel StrataFlash Memory datasheet |
| * |
| * TODO |
| * Use Primary Extended Query table (PRI) and Alternate Algorithm Query Table (ALT) to determine if protection is available |
| * Add support for other command sets Use the PRI and ALT to determine command set |
| * Verify erase and program timeouts. |
| */ |
| |
| #define FLASH_CMD_CFI 0x98 |
| #define FLASH_CMD_READ_ID 0x90 |
| #define FLASH_CMD_RESET 0xff |
| #define FLASH_CMD_BLOCK_ERASE 0x20 |
| #define FLASH_CMD_ERASE_CONFIRM 0xD0 |
| #define FLASH_CMD_WRITE 0x40 |
| #define FLASH_CMD_PROTECT 0x60 |
| #define FLASH_CMD_PROTECT_SET 0x01 |
| #define FLASH_CMD_PROTECT_CLEAR 0xD0 |
| #define FLASH_CMD_CLEAR_STATUS 0x50 |
| #define FLASH_CMD_WRITE_TO_BUFFER 0xE8 |
| #define FLASH_CMD_WRITE_BUFFER_CONFIRM 0xD0 |
| |
| #define FLASH_STATUS_DONE 0x80 |
| #define FLASH_STATUS_ESS 0x40 |
| #define FLASH_STATUS_ECLBS 0x20 |
| #define FLASH_STATUS_PSLBS 0x10 |
| #define FLASH_STATUS_VPENS 0x08 |
| #define FLASH_STATUS_PSS 0x04 |
| #define FLASH_STATUS_DPS 0x02 |
| #define FLASH_STATUS_R 0x01 |
| #define FLASH_STATUS_PROTECT 0x01 |
| |
| #define FLASH_OFFSET_CFI 0x55 |
| #define FLASH_OFFSET_CFI_RESP 0x10 |
| #define FLASH_OFFSET_WTOUT 0x1F |
| #define FLASH_OFFSET_WBTOUT 0x20 |
| #define FLASH_OFFSET_ETOUT 0x21 |
| #define FLASH_OFFSET_CETOUT 0x22 |
| #define FLASH_OFFSET_WMAX_TOUT 0x23 |
| #define FLASH_OFFSET_WBMAX_TOUT 0x24 |
| #define FLASH_OFFSET_EMAX_TOUT 0x25 |
| #define FLASH_OFFSET_CEMAX_TOUT 0x26 |
| #define FLASH_OFFSET_SIZE 0x27 |
| #define FLASH_OFFSET_INTERFACE 0x28 |
| #define FLASH_OFFSET_BUFFER_SIZE 0x2A |
| #define FLASH_OFFSET_NUM_ERASE_REGIONS 0x2C |
| #define FLASH_OFFSET_ERASE_REGIONS 0x2D |
| #define FLASH_OFFSET_PROTECT 0x02 |
| #define FLASH_OFFSET_USER_PROTECTION 0x85 |
| #define FLASH_OFFSET_INTEL_PROTECTION 0x81 |
| |
| #define FLASH_MAN_CFI 0x01000000 |
| |
| typedef union { |
| unsigned char c; |
| unsigned short w; |
| unsigned long l; |
| } cfiword_t; |
| |
| typedef union { |
| unsigned char * cp; |
| unsigned short *wp; |
| unsigned long *lp; |
| } cfiptr_t; |
| |
| #define NUM_ERASE_REGIONS 4 |
| |
| flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ |
| |
| /*----------------------------------------------------------------------- |
| * Functions |
| */ |
| |
| static void flash_add_byte(flash_info_t *info, cfiword_t * cword, uchar c); |
| static void flash_make_cmd(flash_info_t * info, uchar cmd, void * cmdbuf); |
| static void flash_write_cmd(flash_info_t * info, int sect, uchar offset, uchar cmd); |
| static int flash_isequal(flash_info_t * info, int sect, uchar offset, uchar cmd); |
| static int flash_isset(flash_info_t * info, int sect, uchar offset, uchar cmd); |
| static int flash_detect_cfi(flash_info_t * info); |
| static ulong flash_get_size (ulong base, int banknum); |
| static int flash_write_cfiword (flash_info_t *info, ulong dest, cfiword_t cword); |
| static int flash_full_status_check(flash_info_t * info, ulong sector, ulong tout, char * prompt); |
| #ifdef CFG_FLASH_USE_BUFFER_WRITE |
| static int flash_write_cfibuffer(flash_info_t * info, ulong dest, uchar * cp, int len); |
| #endif |
| /*----------------------------------------------------------------------- |
| * create an address based on the offset and the port width |
| */ |
| inline uchar * flash_make_addr(flash_info_t * info, int sect, int offset) |
| { |
| return ((uchar *)(info->start[sect] + (offset * info->portwidth))); |
| } |
| /*----------------------------------------------------------------------- |
| * read a character at a port width address |
| */ |
| inline uchar flash_read_uchar(flash_info_t * info, uchar offset) |
| { |
| uchar *cp; |
| cp = flash_make_addr(info, 0, offset); |
| return (cp[info->portwidth - 1]); |
| } |
| |
| /*----------------------------------------------------------------------- |
| * read a short word by swapping for ppc format. |
| */ |
| ushort flash_read_ushort(flash_info_t * info, int sect, uchar offset) |
| { |
| uchar * addr; |
| |
| addr = flash_make_addr(info, sect, offset); |
| return ((addr[(2*info->portwidth) - 1] << 8) | addr[info->portwidth - 1]); |
| |
| } |
| |
| /*----------------------------------------------------------------------- |
| * read a long word by picking the least significant byte of each maiximum |
| * port size word. Swap for ppc format. |
| */ |
| ulong flash_read_long(flash_info_t * info, int sect, uchar offset) |
| { |
| uchar * addr; |
| |
| addr = flash_make_addr(info, sect, offset); |
| return ( (addr[(2*info->portwidth) - 1] << 24 ) | (addr[(info->portwidth) -1] << 16) | |
| (addr[(4*info->portwidth) - 1] << 8) | addr[(3*info->portwidth) - 1]); |
| |
| } |
| |
| /*----------------------------------------------------------------------- |
| */ |
| unsigned long flash_init (void) |
| { |
| unsigned long size; |
| int i; |
| unsigned long address; |
| |
| |
| /* The flash is positioned back to back, with the demultiplexing of the chip |
| * based on the A24 address line. |
| * |
| */ |
| |
| address = CFG_FLASH_BASE; |
| size = 0; |
| |
| /* Init: no FLASHes known */ |
| for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) { |
| flash_info[i].flash_id = FLASH_UNKNOWN; |
| size += flash_info[i].size = flash_get_size(address, i); |
| address += CFG_FLASH_INCREMENT; |
| if (flash_info[0].flash_id == FLASH_UNKNOWN) { |
| printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",i, |
| flash_info[0].size, flash_info[i].size<<20); |
| } |
| } |
| |
| #if 0 /* test-only */ |
| /* Monitor protection ON by default */ |
| #if (CFG_MONITOR_BASE >= CFG_FLASH_BASE) |
| for(i=0; flash_info[0].start[i] < CFG_MONITOR_BASE+CFG_MONITOR_LEN-1; i++) |
| (void)flash_real_protect(&flash_info[0], i, 1); |
| #endif |
| #else |
| /* monitor protection ON by default */ |
| flash_protect (FLAG_PROTECT_SET, |
| - CFG_MONITOR_LEN, |
| - 1, &flash_info[1]); |
| #endif |
| |
| return (size); |
| } |
| |
| /*----------------------------------------------------------------------- |
| */ |
| int flash_erase (flash_info_t *info, int s_first, int s_last) |
| { |
| int rcode = 0; |
| int prot; |
| int sect; |
| |
| if( info->flash_id != FLASH_MAN_CFI) { |
| printf ("Can't erase unknown flash type - aborted\n"); |
| return 1; |
| } |
| if ((s_first < 0) || (s_first > s_last)) { |
| printf ("- no sectors to erase\n"); |
| return 1; |
| } |
| |
| prot = 0; |
| for (sect=s_first; sect<=s_last; ++sect) { |
| if (info->protect[sect]) { |
| prot++; |
| } |
| } |
| if (prot) { |
| printf ("- Warning: %d protected sectors will not be erased!\n", |
| prot); |
| } else { |
| printf ("\n"); |
| } |
| |
| |
| for (sect = s_first; sect<=s_last; sect++) { |
| if (info->protect[sect] == 0) { /* not protected */ |
| flash_write_cmd(info, sect, 0, FLASH_CMD_CLEAR_STATUS); |
| flash_write_cmd(info, sect, 0, FLASH_CMD_BLOCK_ERASE); |
| flash_write_cmd(info, sect, 0, FLASH_CMD_ERASE_CONFIRM); |
| |
| if(flash_full_status_check(info, sect, info->erase_blk_tout, "erase")) { |
| rcode = 1; |
| } else |
| printf("."); |
| } |
| } |
| printf (" done\n"); |
| return rcode; |
| } |
| |
| /*----------------------------------------------------------------------- |
| */ |
| void flash_print_info (flash_info_t *info) |
| { |
| int i; |
| |
| if (info->flash_id != FLASH_MAN_CFI) { |
| printf ("missing or unknown FLASH type\n"); |
| return; |
| } |
| |
| printf("CFI conformant FLASH (%d x %d)", |
| (info->portwidth << 3 ), (info->chipwidth << 3 )); |
| printf (" Size: %ld MB in %d Sectors\n", |
| info->size >> 20, info->sector_count); |
| printf(" Erase timeout %ld ms, write timeout %ld ms, buffer write timeout %ld ms, buffer size %d\n", |
| info->erase_blk_tout, info->write_tout, info->buffer_write_tout, info->buffer_size); |
| |
| printf (" Sector Start Addresses:"); |
| for (i=0; i<info->sector_count; ++i) { |
| #ifdef CFG_FLASH_EMPTY_INFO |
| int k; |
| int size; |
| int erased; |
| volatile unsigned long *flash; |
| |
| /* |
| * Check if whole sector is erased |
| */ |
| if (i != (info->sector_count-1)) |
| size = info->start[i+1] - info->start[i]; |
| else |
| size = info->start[0] + info->size - info->start[i]; |
| erased = 1; |
| flash = (volatile unsigned long *)info->start[i]; |
| size = size >> 2; /* divide by 4 for longword access */ |
| for (k=0; k<size; k++) |
| { |
| if (*flash++ != 0xffffffff) |
| { |
| erased = 0; |
| break; |
| } |
| } |
| |
| if ((i % 5) == 0) |
| printf ("\n "); |
| /* print empty and read-only info */ |
| printf (" %08lX%s%s", |
| info->start[i], |
| erased ? " E" : " ", |
| info->protect[i] ? "RO " : " "); |
| #else |
| if ((i % 5) == 0) |
| printf ("\n "); |
| printf (" %08lX%s", |
| info->start[i], |
| info->protect[i] ? " (RO)" : " "); |
| #endif |
| } |
| printf ("\n"); |
| return; |
| } |
| |
| /*----------------------------------------------------------------------- |
| * Copy memory to flash, returns: |
| * 0 - OK |
| * 1 - write timeout |
| * 2 - Flash not erased |
| */ |
| int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) |
| { |
| ulong wp; |
| ulong cp; |
| int aln; |
| cfiword_t cword; |
| int i, rc; |
| |
| /* get lower aligned address */ |
| wp = (addr & ~(info->portwidth - 1)); |
| |
| /* handle unaligned start */ |
| if((aln = addr - wp) != 0) { |
| cword.l = 0; |
| cp = wp; |
| for(i=0;i<aln; ++i, ++cp) |
| flash_add_byte(info, &cword, (*(uchar *)cp)); |
| |
| for(; (i< info->portwidth) && (cnt > 0) ; i++) { |
| flash_add_byte(info, &cword, *src++); |
| cnt--; |
| cp++; |
| } |
| for(; (cnt == 0) && (i < info->portwidth); ++i, ++cp) |
| flash_add_byte(info, &cword, (*(uchar *)cp)); |
| if((rc = flash_write_cfiword(info, wp, cword)) != 0) |
| return rc; |
| wp = cp; |
| } |
| |
| #ifdef CFG_FLASH_USE_BUFFER_WRITE |
| while(cnt >= info->portwidth) { |
| i = info->buffer_size > cnt? cnt: info->buffer_size; |
| if((rc = flash_write_cfibuffer(info, wp, src,i)) != ERR_OK) |
| return rc; |
| wp += i; |
| src += i; |
| cnt -=i; |
| } |
| #else |
| /* handle the aligned part */ |
| while(cnt >= info->portwidth) { |
| cword.l = 0; |
| for(i = 0; i < info->portwidth; i++) { |
| flash_add_byte(info, &cword, *src++); |
| } |
| if((rc = flash_write_cfiword(info, wp, cword)) != 0) |
| return rc; |
| wp += info->portwidth; |
| cnt -= info->portwidth; |
| } |
| #endif /* CFG_FLASH_USE_BUFFER_WRITE */ |
| if (cnt == 0) { |
| return (0); |
| } |
| |
| /* |
| * handle unaligned tail bytes |
| */ |
| cword.l = 0; |
| for (i=0, cp=wp; (i<info->portwidth) && (cnt>0); ++i, ++cp) { |
| flash_add_byte(info, &cword, *src++); |
| --cnt; |
| } |
| for (; i<info->portwidth; ++i, ++cp) { |
| flash_add_byte(info, & cword, (*(uchar *)cp)); |
| } |
| |
| return flash_write_cfiword(info, wp, cword); |
| } |
| |
| /*----------------------------------------------------------------------- |
| */ |
| int flash_real_protect(flash_info_t *info, long sector, int prot) |
| { |
| int retcode = 0; |
| |
| flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS); |
| flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT); |
| if(prot) |
| flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT_SET); |
| else |
| flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT_CLEAR); |
| |
| if((retcode = flash_full_status_check(info, sector, info->erase_blk_tout, |
| prot?"protect":"unprotect")) == 0) { |
| |
| info->protect[sector] = prot; |
| /* Intel's unprotect unprotects all locking */ |
| if(prot == 0) { |
| int i; |
| for(i = 0 ; i<info->sector_count; i++) { |
| if(info->protect[i]) |
| flash_real_protect(info, i, 1); |
| } |
| } |
| } |
| |
| return retcode; |
| } |
| /*----------------------------------------------------------------------- |
| * wait for XSR.7 to be set. Time out with an error if it does not. |
| * This routine does not set the flash to read-array mode. |
| */ |
| static int flash_status_check(flash_info_t * info, ulong sector, ulong tout, char * prompt) |
| { |
| ulong start; |
| |
| /* Wait for command completion */ |
| start = get_timer (0); |
| while(!flash_isset(info, sector, 0, FLASH_STATUS_DONE)) { |
| if (get_timer(start) > info->erase_blk_tout) { |
| printf("Flash %s timeout at address %lx\n", prompt, info->start[sector]); |
| flash_write_cmd(info, sector, 0, FLASH_CMD_RESET); |
| return ERR_TIMOUT; |
| } |
| } |
| return ERR_OK; |
| } |
| /*----------------------------------------------------------------------- |
| * Wait for XSR.7 to be set, if it times out print an error, otherwise do a full status check. |
| * This routine sets the flash to read-array mode. |
| */ |
| static int flash_full_status_check(flash_info_t * info, ulong sector, ulong tout, char * prompt) |
| { |
| int retcode; |
| retcode = flash_status_check(info, sector, tout, prompt); |
| if((retcode == ERR_OK) && !flash_isequal(info,sector, 0, FLASH_STATUS_DONE)) { |
| retcode = ERR_INVAL; |
| printf("Flash %s error at address %lx\n", prompt,info->start[sector]); |
| if(flash_isset(info, sector, 0, FLASH_STATUS_ECLBS | FLASH_STATUS_PSLBS)){ |
| printf("Command Sequence Error.\n"); |
| } else if(flash_isset(info, sector, 0, FLASH_STATUS_ECLBS)){ |
| printf("Block Erase Error.\n"); |
| retcode = ERR_NOT_ERASED; |
| } else if (flash_isset(info, sector, 0, FLASH_STATUS_PSLBS)) { |
| printf("Locking Error\n"); |
| } |
| if(flash_isset(info, sector, 0, FLASH_STATUS_DPS)){ |
| printf("Block locked.\n"); |
| retcode = ERR_PROTECTED; |
| } |
| if(flash_isset(info, sector, 0, FLASH_STATUS_VPENS)) |
| printf("Vpp Low Error.\n"); |
| } |
| flash_write_cmd(info, sector, 0, FLASH_CMD_RESET); |
| return retcode; |
| } |
| /*----------------------------------------------------------------------- |
| */ |
| static void flash_add_byte(flash_info_t *info, cfiword_t * cword, uchar c) |
| { |
| switch(info->portwidth) { |
| case FLASH_CFI_8BIT: |
| cword->c = c; |
| break; |
| case FLASH_CFI_16BIT: |
| cword->w = (cword->w << 8) | c; |
| break; |
| case FLASH_CFI_32BIT: |
| cword->l = (cword->l << 8) | c; |
| } |
| } |
| |
| |
| /*----------------------------------------------------------------------- |
| * make a proper sized command based on the port and chip widths |
| */ |
| static void flash_make_cmd(flash_info_t * info, uchar cmd, void * cmdbuf) |
| { |
| int i; |
| uchar *cp = (uchar *)cmdbuf; |
| for(i=0; i< info->portwidth; i++) |
| *cp++ = ((i+1) % info->chipwidth) ? '\0':cmd; |
| } |
| |
| /* |
| * Write a proper sized command to the correct address |
| */ |
| static void flash_write_cmd(flash_info_t * info, int sect, uchar offset, uchar cmd) |
| { |
| |
| volatile cfiptr_t addr; |
| cfiword_t cword; |
| addr.cp = flash_make_addr(info, sect, offset); |
| flash_make_cmd(info, cmd, &cword); |
| switch(info->portwidth) { |
| case FLASH_CFI_8BIT: |
| *addr.cp = cword.c; |
| break; |
| case FLASH_CFI_16BIT: |
| *addr.wp = cword.w; |
| break; |
| case FLASH_CFI_32BIT: |
| *addr.lp = cword.l; |
| break; |
| } |
| } |
| |
| /*----------------------------------------------------------------------- |
| */ |
| static int flash_isequal(flash_info_t * info, int sect, uchar offset, uchar cmd) |
| { |
| cfiptr_t cptr; |
| cfiword_t cword; |
| int retval; |
| cptr.cp = flash_make_addr(info, sect, offset); |
| flash_make_cmd(info, cmd, &cword); |
| switch(info->portwidth) { |
| case FLASH_CFI_8BIT: |
| retval = (cptr.cp[0] == cword.c); |
| break; |
| case FLASH_CFI_16BIT: |
| retval = (cptr.wp[0] == cword.w); |
| break; |
| case FLASH_CFI_32BIT: |
| retval = (cptr.lp[0] == cword.l); |
| break; |
| default: |
| retval = 0; |
| break; |
| } |
| return retval; |
| } |
| /*----------------------------------------------------------------------- |
| */ |
| static int flash_isset(flash_info_t * info, int sect, uchar offset, uchar cmd) |
| { |
| cfiptr_t cptr; |
| cfiword_t cword; |
| int retval; |
| cptr.cp = flash_make_addr(info, sect, offset); |
| flash_make_cmd(info, cmd, &cword); |
| switch(info->portwidth) { |
| case FLASH_CFI_8BIT: |
| retval = ((cptr.cp[0] & cword.c) == cword.c); |
| break; |
| case FLASH_CFI_16BIT: |
| retval = ((cptr.wp[0] & cword.w) == cword.w); |
| break; |
| case FLASH_CFI_32BIT: |
| retval = ((cptr.lp[0] & cword.l) == cword.l); |
| break; |
| default: |
| retval = 0; |
| break; |
| } |
| return retval; |
| } |
| |
| /*----------------------------------------------------------------------- |
| * detect if flash is compatible with the Common Flash Interface (CFI) |
| * http://www.jedec.org/download/search/jesd68.pdf |
| * |
| */ |
| static int flash_detect_cfi(flash_info_t * info) |
| { |
| |
| for(info->portwidth=FLASH_CFI_8BIT; info->portwidth <= FLASH_CFI_32BIT; |
| info->portwidth <<= 1) { |
| for(info->chipwidth =FLASH_CFI_BY8; |
| info->chipwidth <= info->portwidth; |
| info->chipwidth <<= 1) { |
| flash_write_cmd(info, 0, 0, FLASH_CMD_RESET); |
| flash_write_cmd(info, 0, FLASH_OFFSET_CFI, FLASH_CMD_CFI); |
| if(flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP,'Q') && |
| flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP + 1, 'R') && |
| flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP + 2, 'Y')) |
| return 1; |
| } |
| } |
| return 0; |
| } |
| /* |
| * The following code cannot be run from FLASH! |
| * |
| */ |
| static ulong flash_get_size (ulong base, int banknum) |
| { |
| flash_info_t * info = &flash_info[banknum]; |
| int i, j; |
| int sect_cnt; |
| unsigned long sector; |
| unsigned long tmp; |
| int size_ratio; |
| uchar num_erase_regions; |
| int erase_region_size; |
| int erase_region_count; |
| |
| info->start[0] = base; |
| |
| if(flash_detect_cfi(info)){ |
| #ifdef DEBUG_FLASH |
| printf("portwidth=%d chipwidth=%d\n", info->portwidth, info->chipwidth); /* test-only */ |
| #endif |
| size_ratio = info->portwidth / info->chipwidth; |
| num_erase_regions = flash_read_uchar(info, FLASH_OFFSET_NUM_ERASE_REGIONS); |
| #ifdef DEBUG_FLASH |
| printf("found %d erase regions\n", num_erase_regions); |
| #endif |
| sect_cnt = 0; |
| sector = base; |
| for(i = 0 ; i < num_erase_regions; i++) { |
| if(i > NUM_ERASE_REGIONS) { |
| printf("%d erase regions found, only %d used\n", |
| num_erase_regions, NUM_ERASE_REGIONS); |
| break; |
| } |
| tmp = flash_read_long(info, 0, FLASH_OFFSET_ERASE_REGIONS); |
| erase_region_size = (tmp & 0xffff)? ((tmp & 0xffff) * 256): 128; |
| tmp >>= 16; |
| erase_region_count = (tmp & 0xffff) +1; |
| for(j = 0; j< erase_region_count; j++) { |
| info->start[sect_cnt] = sector; |
| sector += (erase_region_size * size_ratio); |
| info->protect[sect_cnt] = flash_isset(info, sect_cnt, FLASH_OFFSET_PROTECT, FLASH_STATUS_PROTECT); |
| sect_cnt++; |
| } |
| } |
| |
| info->sector_count = sect_cnt; |
| /* multiply the size by the number of chips */ |
| info->size = (1 << flash_read_uchar(info, FLASH_OFFSET_SIZE)) * size_ratio; |
| info->buffer_size = (1 << flash_read_ushort(info, 0, FLASH_OFFSET_BUFFER_SIZE)); |
| tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_ETOUT); |
| info->erase_blk_tout = (tmp * (1 << flash_read_uchar(info, FLASH_OFFSET_EMAX_TOUT))); |
| tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_WBTOUT); |
| info->buffer_write_tout = (tmp * (1 << flash_read_uchar(info, FLASH_OFFSET_WBMAX_TOUT))); |
| tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_WTOUT); |
| info->write_tout = (tmp * (1 << flash_read_uchar(info, FLASH_OFFSET_WMAX_TOUT)))/ 1000; |
| info->flash_id = FLASH_MAN_CFI; |
| } |
| |
| flash_write_cmd(info, 0, 0, FLASH_CMD_RESET); |
| return(info->size); |
| } |
| |
| |
| /*----------------------------------------------------------------------- |
| */ |
| static int flash_write_cfiword (flash_info_t *info, ulong dest, cfiword_t cword) |
| { |
| |
| cfiptr_t ctladdr; |
| cfiptr_t cptr; |
| int flag; |
| |
| ctladdr.cp = flash_make_addr(info, 0, 0); |
| cptr.cp = (uchar *)dest; |
| |
| |
| /* Check if Flash is (sufficiently) erased */ |
| switch(info->portwidth) { |
| case FLASH_CFI_8BIT: |
| flag = ((cptr.cp[0] & cword.c) == cword.c); |
| break; |
| case FLASH_CFI_16BIT: |
| flag = ((cptr.wp[0] & cword.w) == cword.w); |
| break; |
| case FLASH_CFI_32BIT: |
| flag = ((cptr.lp[0] & cword.l) == cword.l); |
| break; |
| default: |
| return 2; |
| } |
| if(!flag) |
| return 2; |
| |
| /* Disable interrupts which might cause a timeout here */ |
| flag = disable_interrupts(); |
| |
| flash_write_cmd(info, 0, 0, FLASH_CMD_CLEAR_STATUS); |
| flash_write_cmd(info, 0, 0, FLASH_CMD_WRITE); |
| |
| switch(info->portwidth) { |
| case FLASH_CFI_8BIT: |
| cptr.cp[0] = cword.c; |
| break; |
| case FLASH_CFI_16BIT: |
| cptr.wp[0] = cword.w; |
| break; |
| case FLASH_CFI_32BIT: |
| cptr.lp[0] = cword.l; |
| break; |
| } |
| |
| /* re-enable interrupts if necessary */ |
| if(flag) |
| enable_interrupts(); |
| |
| return flash_full_status_check(info, 0, info->write_tout, "write"); |
| } |
| |
| #ifdef CFG_FLASH_USE_BUFFER_WRITE |
| |
| /* loop through the sectors from the highest address |
| * when the passed address is greater or equal to the sector address |
| * we have a match |
| */ |
| static int find_sector(flash_info_t *info, ulong addr) |
| { |
| int sector; |
| for(sector = info->sector_count - 1; sector >= 0; sector--) { |
| if(addr >= info->start[sector]) |
| break; |
| } |
| return sector; |
| } |
| |
| static int flash_write_cfibuffer(flash_info_t * info, ulong dest, uchar * cp, int len) |
| { |
| |
| int sector; |
| int cnt; |
| int retcode; |
| volatile cfiptr_t src; |
| volatile cfiptr_t dst; |
| |
| src.cp = cp; |
| dst.cp = (uchar *)dest; |
| sector = find_sector(info, dest); |
| flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS); |
| flash_write_cmd(info, sector, 0, FLASH_CMD_WRITE_TO_BUFFER); |
| if((retcode = flash_status_check(info, sector, info->buffer_write_tout, |
| "write to buffer")) == ERR_OK) { |
| switch(info->portwidth) { |
| case FLASH_CFI_8BIT: |
| cnt = len; |
| break; |
| case FLASH_CFI_16BIT: |
| cnt = len >> 1; |
| break; |
| case FLASH_CFI_32BIT: |
| cnt = len >> 2; |
| break; |
| default: |
| return ERR_INVAL; |
| break; |
| } |
| flash_write_cmd(info, sector, 0, (uchar)cnt-1); |
| while(cnt-- > 0) { |
| switch(info->portwidth) { |
| case FLASH_CFI_8BIT: |
| *dst.cp++ = *src.cp++; |
| break; |
| case FLASH_CFI_16BIT: |
| *dst.wp++ = *src.wp++; |
| break; |
| case FLASH_CFI_32BIT: |
| *dst.lp++ = *src.lp++; |
| break; |
| default: |
| return ERR_INVAL; |
| break; |
| } |
| } |
| flash_write_cmd(info, sector, 0, FLASH_CMD_WRITE_BUFFER_CONFIRM); |
| retcode = flash_full_status_check(info, sector, info->buffer_write_tout, |
| "buffer write"); |
| } |
| flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS); |
| return retcode; |
| } |
| #endif /* CFG_USE_FLASH_BUFFER_WRITE */ |