| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com> |
| */ |
| |
| /dts-v1/; |
| |
| #include <dt-bindings/mrc/quark.h> |
| #include <dt-bindings/interrupt-router/intel-irq.h> |
| |
| /include/ "skeleton.dtsi" |
| /include/ "reset.dtsi" |
| /include/ "rtc.dtsi" |
| |
| #include "tsc_timer.dtsi" |
| |
| / { |
| model = "Intel Galileo"; |
| compatible = "intel,galileo", "intel,quark"; |
| |
| aliases { |
| spi0 = &spi; |
| }; |
| |
| config { |
| silent_console = <0>; |
| }; |
| |
| chosen { |
| stdout-path = &pciuart0; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu@0 { |
| device_type = "cpu"; |
| compatible = "cpu-x86"; |
| reg = <0>; |
| intel,apic-id = <0>; |
| }; |
| }; |
| |
| mrc { |
| compatible = "intel,quark-mrc"; |
| flags = <MRC_FLAG_SCRAMBLE_EN>; |
| dram-width = <DRAM_WIDTH_X8>; |
| dram-speed = <DRAM_FREQ_800>; |
| dram-type = <DRAM_TYPE_DDR3>; |
| rank-mask = <DRAM_RANK(0)>; |
| chan-mask = <DRAM_CHANNEL(0)>; |
| chan-width = <DRAM_CHANNEL_WIDTH_X16>; |
| addr-mode = <DRAM_ADDR_MODE0>; |
| refresh-rate = <DRAM_REFRESH_RATE_785US>; |
| sr-temp-range = <DRAM_SRT_RANGE_NORMAL>; |
| ron-value = <DRAM_RON_34OHM>; |
| rtt-nom-value = <DRAM_RTT_NOM_120OHM>; |
| rd-odt-value = <DRAM_RD_ODT_OFF>; |
| dram-density = <DRAM_DENSITY_1G>; |
| dram-cl = <6>; |
| dram-ras = <0x0000927c>; |
| dram-wtr = <0x00002710>; |
| dram-rrd = <0x00002710>; |
| dram-faw = <0x00009c40>; |
| }; |
| |
| pci { |
| #address-cells = <3>; |
| #size-cells = <2>; |
| compatible = "pci-x86"; |
| u-boot,dm-pre-reloc; |
| ranges = <0x02000000 0x0 0x90000000 0x90000000 0 0x20000000 |
| 0x42000000 0x0 0xb0000000 0xb0000000 0 0x20000000 |
| 0x01000000 0x0 0x2000 0x2000 0 0xe000>; |
| |
| pciuart0: uart@14,5 { |
| compatible = "pci8086,0936.00", |
| "pci8086,0936", |
| "pciclass,070002", |
| "pciclass,0700", |
| "ns16550"; |
| u-boot,dm-pre-reloc; |
| reg = <0x0000a500 0x0 0x0 0x0 0x0 |
| 0x0200a510 0x0 0x0 0x0 0x0>; |
| reg-shift = <2>; |
| clock-frequency = <44236800>; |
| current-speed = <115200>; |
| }; |
| |
| pch@1f,0 { |
| reg = <0x0000f800 0 0 0 0>; |
| compatible = "intel,pch7"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| irq-router { |
| compatible = "intel,irq-router"; |
| intel,pirq-config = "pci"; |
| intel,actl-addr = <0x58>; |
| intel,pirq-link = <0x60 8>; |
| intel,pirq-mask = <0xdef8>; |
| intel,pirq-routing = < |
| PCI_BDF(0, 20, 0) INTA PIRQE |
| PCI_BDF(0, 20, 1) INTB PIRQF |
| PCI_BDF(0, 20, 2) INTC PIRQG |
| PCI_BDF(0, 20, 3) INTD PIRQH |
| PCI_BDF(0, 20, 4) INTA PIRQE |
| PCI_BDF(0, 20, 5) INTB PIRQF |
| PCI_BDF(0, 20, 6) INTC PIRQG |
| PCI_BDF(0, 20, 7) INTD PIRQH |
| PCI_BDF(0, 21, 0) INTA PIRQE |
| PCI_BDF(0, 21, 1) INTB PIRQF |
| PCI_BDF(0, 21, 2) INTC PIRQG |
| PCI_BDF(0, 23, 0) INTA PIRQA |
| PCI_BDF(0, 23, 1) INTB PIRQB |
| |
| /* PCIe root ports downstream interrupts */ |
| PCI_BDF(1, 0, 0) INTA PIRQA |
| PCI_BDF(1, 0, 0) INTB PIRQB |
| PCI_BDF(1, 0, 0) INTC PIRQC |
| PCI_BDF(1, 0, 0) INTD PIRQD |
| PCI_BDF(2, 0, 0) INTA PIRQB |
| PCI_BDF(2, 0, 0) INTB PIRQC |
| PCI_BDF(2, 0, 0) INTC PIRQD |
| PCI_BDF(2, 0, 0) INTD PIRQA |
| >; |
| }; |
| |
| spi: spi { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "intel,ich7-spi"; |
| spi-flash@0 { |
| #size-cells = <1>; |
| #address-cells = <1>; |
| reg = <0>; |
| compatible = "winbond,w25q64", |
| "jedec,spi-nor"; |
| memory-map = <0xff800000 0x00800000>; |
| rw-mrc-cache { |
| label = "rw-mrc-cache"; |
| reg = <0x00010000 0x00010000>; |
| }; |
| }; |
| }; |
| |
| gpioa { |
| compatible = "intel,ich6-gpio"; |
| u-boot,dm-pre-reloc; |
| reg = <0 0x20>; |
| bank-name = "A"; |
| }; |
| |
| gpiob { |
| compatible = "intel,ich6-gpio"; |
| u-boot,dm-pre-reloc; |
| reg = <0x20 0x20>; |
| bank-name = "B"; |
| }; |
| }; |
| }; |
| |
| smbios { |
| compatible = "u-boot,sysinfo-smbios"; |
| |
| /* |
| * Override the default product name U-Boot reports in the |
| * SMBIOS table, to be compatible with the Intel provided UEFI |
| * BIOS, as Linux kernel drivers |
| * (drivers/mfd/intel_quark_i2c_gpio.c and |
| * drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c) make use of |
| * it to do different board level configuration. |
| * |
| * This can be "Galileo" for GEN1 Galileo board. |
| */ |
| smbios { |
| system { |
| product = "GalileoGen2"; |
| }; |
| |
| baseboard { |
| product = "GalileoGen2"; |
| }; |
| |
| chassis { |
| product = "GalileoGen2"; |
| }; |
| }; |
| }; |
| |
| }; |