| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright 2019 Google LLC |
| */ |
| |
| #define LOG_CATEGORY UCLASS_ACPI_PMC |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <log.h> |
| #include <acpi/acpi_s3.h> |
| #ifdef CONFIG_X86 |
| #include <asm/intel_pinctrl.h> |
| #endif |
| #include <asm/io.h> |
| #include <power/acpi_pmc.h> |
| |
| struct tco_regs { |
| u32 tco_rld; |
| u32 tco_sts; |
| u32 tco1_cnt; |
| u32 tco_tmr; |
| }; |
| |
| enum { |
| TCO_STS_TIMEOUT = 1 << 3, |
| TCO_STS_SECOND_TO_STS = 1 << 17, |
| TCO1_CNT_HLT = 1 << 11, |
| }; |
| |
| #ifdef CONFIG_X86 |
| static int gpe0_shift(struct acpi_pmc_upriv *upriv, int regnum) |
| { |
| return upriv->gpe0_dwx_shift_base + regnum * 4; |
| } |
| |
| int pmc_gpe_init(struct udevice *dev) |
| { |
| struct acpi_pmc_upriv *upriv = dev_get_uclass_priv(dev); |
| struct udevice *itss; |
| u32 *dw; |
| u32 gpio_cfg_mask; |
| u32 gpio_cfg; |
| int ret, i; |
| u32 mask; |
| |
| if (device_get_uclass_id(dev) != UCLASS_ACPI_PMC) |
| return log_msg_ret("uclass", -EPROTONOSUPPORT); |
| dw = upriv->gpe0_dw; |
| mask = upriv->gpe0_dwx_mask; |
| gpio_cfg_mask = 0; |
| for (i = 0; i < upriv->gpe0_count; i++) { |
| gpio_cfg_mask |= mask << gpe0_shift(upriv, i); |
| if (dw[i] & ~mask) |
| return log_msg_ret("Base GPE0 value", -EINVAL); |
| } |
| |
| /* |
| * Route the GPIOs to the GPE0 block. Determine that all values |
| * are different and if they aren't, use the reset values. |
| */ |
| if (dw[0] == dw[1] || dw[1] == dw[2]) { |
| log_info("PMC: Using default GPE route"); |
| gpio_cfg = readl(upriv->gpe_cfg); |
| for (i = 0; i < upriv->gpe0_count; i++) |
| dw[i] = gpio_cfg >> gpe0_shift(upriv, i); |
| } else { |
| gpio_cfg = 0; |
| for (i = 0; i < upriv->gpe0_count; i++) |
| gpio_cfg |= dw[i] << gpe0_shift(upriv, i); |
| clrsetbits_le32(upriv->gpe_cfg, gpio_cfg_mask, gpio_cfg); |
| } |
| |
| /* Set the routes in the GPIO communities as well */ |
| ret = uclass_first_device_err(UCLASS_IRQ, &itss); |
| if (ret) |
| return log_msg_ret("Cannot find itss", ret); |
| pinctrl_route_gpe(itss, dw[0], dw[1], dw[2]); |
| |
| return 0; |
| } |
| #endif /* CONFIG_X86 */ |
| |
| static void pmc_fill_pm_reg_info(struct udevice *dev) |
| { |
| struct acpi_pmc_upriv *upriv = dev_get_uclass_priv(dev); |
| int i; |
| |
| upriv->pm1_sts = inw(upriv->acpi_base + PM1_STS); |
| upriv->pm1_en = inw(upriv->acpi_base + PM1_EN); |
| upriv->pm1_cnt = inw(upriv->acpi_base + PM1_CNT); |
| |
| log_debug("pm1_sts: %04x pm1_en: %04x pm1_cnt: %08x\n", |
| upriv->pm1_sts, upriv->pm1_en, upriv->pm1_cnt); |
| |
| for (i = 0; i < GPE0_REG_MAX; i++) { |
| upriv->gpe0_sts[i] = inl(upriv->acpi_base + GPE0_STS + i * 4); |
| upriv->gpe0_en[i] = inl(upriv->acpi_base + GPE0_EN + i * 4); |
| log_debug("gpe0_sts[%d]: %08x gpe0_en[%d]: %08x\n", i, |
| upriv->gpe0_sts[i], i, upriv->gpe0_en[i]); |
| } |
| } |
| |
| int pmc_disable_tco_base(ulong tco_base) |
| { |
| struct tco_regs *regs = (struct tco_regs *)tco_base; |
| |
| debug("tco_base %lx = %x\n", (ulong)®s->tco1_cnt, TCO1_CNT_HLT); |
| setio_32(®s->tco1_cnt, TCO1_CNT_HLT); |
| |
| return 0; |
| } |
| |
| int pmc_init(struct udevice *dev) |
| { |
| const struct acpi_pmc_ops *ops = acpi_pmc_get_ops(dev); |
| int ret; |
| |
| pmc_fill_pm_reg_info(dev); |
| if (!ops->init) |
| return -ENOSYS; |
| |
| ret = ops->init(dev); |
| if (ret) |
| return log_msg_ret("Failed to init pmc", ret); |
| |
| #ifdef DEBUG |
| pmc_dump_info(dev); |
| #endif |
| |
| return 0; |
| } |
| |
| int pmc_prev_sleep_state(struct udevice *dev) |
| { |
| struct acpi_pmc_upriv *upriv = dev_get_uclass_priv(dev); |
| const struct acpi_pmc_ops *ops = acpi_pmc_get_ops(dev); |
| int prev_sleep_state = ACPI_S0; /* Default to S0 */ |
| |
| if (upriv->pm1_sts & WAK_STS) { |
| switch (acpi_sleep_from_pm1(upriv->pm1_cnt)) { |
| case ACPI_S3: |
| if (IS_ENABLED(HAVE_ACPI_RESUME)) |
| prev_sleep_state = ACPI_S3; |
| break; |
| case ACPI_S5: |
| prev_sleep_state = ACPI_S5; |
| break; |
| default: |
| break; |
| } |
| |
| /* Clear SLP_TYP */ |
| outl(upriv->pm1_cnt & ~SLP_TYP, upriv->acpi_base + PM1_CNT); |
| } |
| |
| if (!ops->prev_sleep_state) |
| return prev_sleep_state; |
| |
| return ops->prev_sleep_state(dev, prev_sleep_state); |
| } |
| |
| int pmc_disable_tco(struct udevice *dev) |
| { |
| const struct acpi_pmc_ops *ops = acpi_pmc_get_ops(dev); |
| |
| pmc_fill_pm_reg_info(dev); |
| if (!ops->disable_tco) |
| return -ENOSYS; |
| |
| return ops->disable_tco(dev); |
| } |
| |
| int pmc_global_reset_set_enable(struct udevice *dev, bool enable) |
| { |
| const struct acpi_pmc_ops *ops = acpi_pmc_get_ops(dev); |
| |
| if (!ops->global_reset_set_enable) |
| return -ENOSYS; |
| |
| return ops->global_reset_set_enable(dev, enable); |
| } |
| |
| void pmc_dump_info(struct udevice *dev) |
| { |
| struct acpi_pmc_upriv *upriv = dev_get_uclass_priv(dev); |
| int i; |
| |
| printf("Device: %s\n", dev->name); |
| printf("ACPI base %x, pmc_bar0 %p, pmc_bar2 %p, gpe_cfg %p\n", |
| upriv->acpi_base, upriv->pmc_bar0, upriv->pmc_bar2, |
| upriv->gpe_cfg); |
| printf("pm1_sts: %04x pm1_en: %04x pm1_cnt: %08x\n", |
| upriv->pm1_sts, upriv->pm1_en, upriv->pm1_cnt); |
| |
| for (i = 0; i < GPE0_REG_MAX; i++) { |
| printf("gpe0_sts[%d]: %08x gpe0_en[%d]: %08x\n", i, |
| upriv->gpe0_sts[i], i, upriv->gpe0_en[i]); |
| } |
| |
| printf("prsts: %08x\n", upriv->prsts); |
| printf("tco_sts: %04x %04x\n", upriv->tco1_sts, upriv->tco2_sts); |
| printf("gen_pmcon1: %08x gen_pmcon2: %08x gen_pmcon3: %08x\n", |
| upriv->gen_pmcon1, upriv->gen_pmcon2, upriv->gen_pmcon3); |
| } |
| |
| int pmc_ofdata_to_uc_platdata(struct udevice *dev) |
| { |
| struct acpi_pmc_upriv *upriv = dev_get_uclass_priv(dev); |
| int ret; |
| |
| ret = dev_read_u32(dev, "gpe0-dwx-mask", &upriv->gpe0_dwx_mask); |
| if (ret) |
| return log_msg_ret("no gpe0-dwx-mask", ret); |
| ret = dev_read_u32(dev, "gpe0-dwx-shift-base", |
| &upriv->gpe0_dwx_shift_base); |
| if (ret) |
| return log_msg_ret("no gpe0-dwx-shift-base", ret); |
| ret = dev_read_u32(dev, "gpe0-sts", &upriv->gpe0_sts_reg); |
| if (ret) |
| return log_msg_ret("no gpe0-sts", ret); |
| upriv->gpe0_sts_reg += upriv->acpi_base; |
| ret = dev_read_u32(dev, "gpe0-en", &upriv->gpe0_en_reg); |
| if (ret) |
| return log_msg_ret("no gpe0-en", ret); |
| upriv->gpe0_en_reg += upriv->acpi_base; |
| |
| return 0; |
| } |
| |
| UCLASS_DRIVER(acpi_pmc) = { |
| .id = UCLASS_ACPI_PMC, |
| .name = "power-mgr", |
| .per_device_auto_alloc_size = sizeof(struct acpi_pmc_upriv), |
| }; |