include/configs/IceCube.h - platform/external/u-boot - Gitiles

 /*
  * (C) Copyright 2003-2005
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */

 #ifndef __CONFIG_H
 #define __CONFIG_H

 /*
  * High Level Configuration Options
  * (easy to change)
  */

 #define CONFIG_MPC5xxx		1	/* This is an MPC5xxx CPU */
 #define CONFIG_ICECUBE		1	/* ... on IceCube board */

 #define CFG_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz */

 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
 #define BOOTFLAG_WARM		0x02	/* Software reboot	     */

 #define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 #  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif

 /*
  * Serial console configuration
  */
 #define CONFIG_PSC_CONSOLE	1	/* console is on PSC1 */
 #define CONFIG_BAUDRATE		115200	/* ... at 115200 bps */
 #define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }


 #ifdef CONFIG_MPC5200	/* MPC5100 PCI is not supported yet. */
 /*
  * PCI Mapping:
  * 0x40000000 - 0x4fffffff - PCI Memory
  * 0x50000000 - 0x50ffffff - PCI IO Space
  */
 #define CONFIG_PCI

 #if defined(CONFIG_PCI)
 #define CONFIG_PCI_PNP		1
 #define CONFIG_PCI_SCAN_SHOW	1

 #define CONFIG_PCI_MEM_BUS	0x40000000
 #define CONFIG_PCI_MEM_PHYS	CONFIG_PCI_MEM_BUS
 #define CONFIG_PCI_MEM_SIZE	0x10000000

 #define CONFIG_PCI_IO_BUS	0x50000000
 #define CONFIG_PCI_IO_PHYS	CONFIG_PCI_IO_BUS
 #define CONFIG_PCI_IO_SIZE	0x01000000
 #define ADD_PCI_CMD 		CFG_CMD_PCI
 #endif

 #define CFG_XLB_PIPELINING	1

 #define CONFIG_NET_MULTI	1
 #define CONFIG_MII		1
 #define CONFIG_EEPRO100		1
 #define CFG_RX_ETH_BUFFER	8  /* use 8 rx buffer on eepro100  */
 #define CONFIG_NS8382X		1

 #else	/* MPC5100 */

 #define CONFIG_MII		1
 #define ADD_PCI_CMD		0  /* no CFG_CMD_PCI */

 #endif

 /* Partitions */
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
 #define CONFIG_ISO_PARTITION

 /* USB */
 #if 1
 #define CONFIG_USB_OHCI
 #define ADD_USB_CMD             CFG_CMD_USB | CFG_CMD_FAT
 #define CONFIG_USB_STORAGE
 #else
 #define ADD_USB_CMD             0
 #endif

 #define	CONFIG_TIMESTAMP		/* Print image info with timestamp */

 /*
  * Supported commands
  */
 #define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
 				CFG_CMD_EEPROM	| \
 				CFG_CMD_FAT	| \
 				CFG_CMD_I2C	| \
 				CFG_CMD_IDE	| \
 				CFG_CMD_NFS	| \
 				CFG_CMD_SNTP	| \
 				ADD_PCI_CMD	| \
 				ADD_USB_CMD	)

 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>

 #if (TEXT_BASE == 0xFF000000)		/* Boot low with 16 MB Flash */
 #   define CFG_LOWBOOT	        1
 #   define CFG_LOWBOOT16	1
 #endif
 #if (TEXT_BASE == 0xFF800000)		/* Boot low with  8 MB Flash */
 #if defined(CONFIG_LITE5200B)
 #   error CFG_LOWBOOT08 is incompatible with the Lite5200B
 #else
 #   define CFG_LOWBOOT	        1
 #   define CFG_LOWBOOT08	1
 #endif
 #endif

 /*
  * Autobooting
  */
 #define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */

 #define CONFIG_PREBOOT	"echo;"	\
 	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
 	"echo"

 #undef	CONFIG_BOOTARGS

 #define	CONFIG_EXTRA_ENV_SETTINGS					\
 	"netdev=eth0\0"							\
 	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
 		"nfsroot=${serverip}:${rootpath}\0"			\
 	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
 	"addip=setenv bootargs ${bootargs} "				\
 		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
 		":${hostname}:${netdev}:off panic=1\0"			\
 	"flash_nfs=run nfsargs addip;"					\
 		"bootm ${kernel_addr}\0"				\
 	"flash_self=run ramargs addip;"					\
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_82xx\0"					\
 	"bootfile=/tftpboot/MPC5200/uImage\0"				\
 	""

 #define CONFIG_BOOTCOMMAND	"run flash_self"

 #if defined(CONFIG_MPC5200)
 /*
  * IPB Bus clocking configuration.
  */
 #if defined(CONFIG_LITE5200B)
 #define CFG_IPBCLK_EQUALS_XLBCLK 	/* define for 133MHz speed */
 #else
 #undef CFG_IPBCLK_EQUALS_XLBCLK   	/* define for 133MHz speed */
 #endif
 #endif /* CONFIG_MPC5200 */

 /* pass open firmware flat tree */
 #define CONFIG_OF_FLAT_TREE	1
 #define CONFIG_OF_BOARD_SETUP	1

 /* maximum size of the flat tree (8K) */
 #define OF_FLAT_TREE_MAX_SIZE	8192

 #define OF_CPU			"PowerPC,5200@0"
 #define OF_SOC			"soc5200@f0000000"
 #define OF_TBCLK		(bd->bi_busfreq / 4)
 #define OF_STDOUT_PATH		"/soc5200@f0000000/serial@2000"

 /*
  * I2C configuration
  */
 #define CONFIG_HARD_I2C		1	/* I2C with hardware support */
 #define CFG_I2C_MODULE		2	/* Select I2C module #1 or #2 */

 #define CFG_I2C_SPEED		100000 /* 100 kHz */
 #define CFG_I2C_SLAVE		0x7F

 /*
  * EEPROM configuration
  */
 #define CFG_I2C_EEPROM_ADDR		0x50	/* 1010000x */
 #define CFG_I2C_EEPROM_ADDR_LEN		1
 #define CFG_EEPROM_PAGE_WRITE_BITS	3
 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS	70

 /*
  * Flash configuration
  */
 #if defined(CONFIG_LITE5200B)
 #define CFG_FLASH_BASE		0xFE000000
 #define CFG_FLASH_SIZE		0x01000000
 #if !defined(CFG_LOWBOOT)
 #define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x01760000 + 0x00800000)
 #else	/* CFG_LOWBOOT */
 #if defined(CFG_LOWBOOT08)
 # error CFG_LOWBOOT08 is incompatible with the Lite5200B
 #endif
 #if defined(CFG_LOWBOOT16)
 #define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x01060000)
 #endif
 #endif /* CFG_LOWBOOT */
 #else /* !CONFIG_LITE5200B (IceCube)*/
 #define CFG_FLASH_BASE		0xFF000000
 #define CFG_FLASH_SIZE		0x01000000
 #if !defined(CFG_LOWBOOT)
 #define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x00740000 + 0x00800000)
 #else	/* CFG_LOWBOOT */
 #if defined(CFG_LOWBOOT08)
 #define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x00040000 + 0x00800000)
 #endif
 #if defined(CFG_LOWBOOT16)
 #define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x00040000)
 #endif
 #endif	/* CFG_LOWBOOT */
 #endif /* CONFIG_LITE5200B */
 #define CFG_MAX_FLASH_BANKS	2	/* max num of memory banks      */

 #define CFG_MAX_FLASH_SECT	128	/* max num of sects on one chip */

 #define CFG_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)  */
 #define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)  */

 #undef CONFIG_FLASH_16BIT	/* Flash is 8-bit */

 #if defined(CONFIG_LITE5200B)
 #define CFG_FLASH_CFI_DRIVER
 #define CFG_FLASH_CFI
 #define CFG_FLASH_BANKS_LIST	{CFG_CS1_START,CFG_CS0_START}
 #endif


 /*
  * Environment settings
  */
 #define CFG_ENV_IS_IN_FLASH	1
 #define CFG_ENV_SIZE		0x10000
 #if defined(CONFIG_LITE5200B)
 #define CFG_ENV_SECT_SIZE	0x20000
 #else
 #define CFG_ENV_SECT_SIZE	0x10000
 #endif
 #define CONFIG_ENV_OVERWRITE	1

 /*
  * Memory map
  */
 #define CFG_MBAR		0xF0000000
 #define CFG_SDRAM_BASE		0x00000000
 #define CFG_DEFAULT_MBAR	0x80000000

 /* Use SRAM until RAM will be available */
 #define CFG_INIT_RAM_ADDR	MPC5XXX_SRAM
 #define CFG_INIT_RAM_END	MPC5XXX_SRAM_SIZE	/* End of used area in DPRAM */


 #define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 #define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 #define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET

 #define CFG_MONITOR_BASE    TEXT_BASE
 #if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
 #   define CFG_RAMBOOT		1
 #endif

 #define CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
 #define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 #define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */

 /*
  * Ethernet configuration
  */
 #define CONFIG_MPC5xxx_FEC	1
 /*
  * Define CONFIG_FEC_10MBIT to force FEC at 10Mb
  */
 /* #define CONFIG_FEC_10MBIT 1 */
 #define CONFIG_PHY_ADDR		0x00
 #if defined(CONFIG_LITE5200B)
 #define CONFIG_FEC_MII100	1
 #endif

 /*
  * GPIO configuration
  */
 #ifdef CONFIG_MPC5200_DDR
 #define CFG_GPS_PORT_CONFIG	0x90000004
 #else
 #define CFG_GPS_PORT_CONFIG	0x10000004
 #endif

 /*
  * Miscellaneous configurable options
  */
 #define CFG_LONGHELP			/* undef to save memory	    */
 #define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 #define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
 #define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
 #endif
 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
 #define CFG_MAXARGS		16		/* max number of command args	*/
 #define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/

 #define CFG_MEMTEST_START	0x00100000	/* memtest works on */
 #define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/

 #define CFG_LOAD_ADDR		0x100000	/* default load address */

 #define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */

 /*
  * Various low-level settings
  */
 #if defined(CONFIG_MPC5200)
 #define CFG_HID0_INIT		HID0_ICE | HID0_ICFI
 #define CFG_HID0_FINAL		HID0_ICE
 #else
 #define CFG_HID0_INIT		0
 #define CFG_HID0_FINAL		0
 #endif

 #if defined(CONFIG_LITE5200B)
 #define CFG_CS1_START		CFG_FLASH_BASE
 #define CFG_CS1_SIZE		CFG_FLASH_SIZE
 #define CFG_CS1_CFG		0x00047800
 #define CFG_CS0_START		(CFG_FLASH_BASE + CFG_FLASH_SIZE)
 #define CFG_CS0_SIZE		CFG_FLASH_SIZE
 #define CFG_BOOTCS_START	CFG_CS0_START
 #define CFG_BOOTCS_SIZE		CFG_FLASH_SIZE
 #define CFG_BOOTCS_CFG		0x00047800
 #else /* IceCube aka Lite5200 */
 #ifdef CONFIG_MPC5200_DDR

 #define CFG_BOOTCS_START	(CFG_CS1_START + CFG_CS1_SIZE)
 #define CFG_BOOTCS_SIZE		0x00800000
 #define CFG_BOOTCS_CFG		0x00047801
 #define CFG_CS1_START		CFG_FLASH_BASE
 #define CFG_CS1_SIZE		0x00800000
 #define CFG_CS1_CFG		0x00047800

 #else /* !CONFIG_MPC5200_DDR */

 #define CFG_BOOTCS_START	CFG_FLASH_BASE
 #define CFG_BOOTCS_SIZE		CFG_FLASH_SIZE
 #define CFG_BOOTCS_CFG		0x00047801
 #define CFG_CS0_START		CFG_FLASH_BASE
 #define CFG_CS0_SIZE		CFG_FLASH_SIZE

 #endif /* CONFIG_MPC5200_DDR */
 #endif /*CONFIG_LITE5200B */

 #define CFG_CS_BURST		0x00000000
 #define CFG_CS_DEADCYCLE	0x33333333

 #define CFG_RESET_ADDRESS	0xff000000

 /*-----------------------------------------------------------------------
  * USB stuff
  *-----------------------------------------------------------------------
  */
 #define CONFIG_USB_CLOCK	0x0001BBBB
 #define CONFIG_USB_CONFIG	0x00001000

 /*-----------------------------------------------------------------------
  * IDE/ATA stuff Supports IDE harddisk
  *-----------------------------------------------------------------------
  */

 #undef  CONFIG_IDE_8xx_PCCARD		/* Use IDE with PC Card	Adapter	*/

 #undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE    not supported	*/
 #undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/

 #define	CONFIG_IDE_RESET		/* reset for ide supported	*/
 #define CONFIG_IDE_PREINIT

 #define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
 #define CFG_IDE_MAXDEVICE	2	/* max. 1 drive per IDE bus	*/

 #define CFG_ATA_IDE0_OFFSET	0x0000

 #define CFG_ATA_BASE_ADDR	MPC5XXX_ATA

 /* Offset for data I/O			*/
 #define CFG_ATA_DATA_OFFSET	(0x0060)

 /* Offset for normal register accesses	*/
 #define CFG_ATA_REG_OFFSET	(CFG_ATA_DATA_OFFSET)

 /* Offset for alternate registers	*/
 #define CFG_ATA_ALT_OFFSET	(0x005C)

 /* Interval between registers                                                */
 #define CFG_ATA_STRIDE          4

 #define CONFIG_ATAPI            1

 #endif /* __CONFIG_H */
	/*
	* (C) Copyright 2003-2005
	* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/

	#ifndef __CONFIG_H
	#define __CONFIG_H

	/*
	* High Level Configuration Options
	* (easy to change)
	*/

	#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */
	#define CONFIG_ICECUBE 1 /* ... on IceCube board */

	#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */

	#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
	#define BOOTFLAG_WARM 0x02 /* Software reboot */

	#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
	#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
	# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
	#endif

	/*
	* Serial console configuration
	*/
	#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
	#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
	#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }


	#ifdef CONFIG_MPC5200 /* MPC5100 PCI is not supported yet. */
	/*
	* PCI Mapping:
	* 0x40000000 - 0x4fffffff - PCI Memory
	* 0x50000000 - 0x50ffffff - PCI IO Space
	*/
	#define CONFIG_PCI

	#if defined(CONFIG_PCI)
	#define CONFIG_PCI_PNP 1
	#define CONFIG_PCI_SCAN_SHOW 1

	#define CONFIG_PCI_MEM_BUS 0x40000000
	#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
	#define CONFIG_PCI_MEM_SIZE 0x10000000

	#define CONFIG_PCI_IO_BUS 0x50000000
	#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
	#define CONFIG_PCI_IO_SIZE 0x01000000
	#define ADD_PCI_CMD CFG_CMD_PCI
	#endif

	#define CFG_XLB_PIPELINING 1

	#define CONFIG_NET_MULTI 1
	#define CONFIG_MII 1
	#define CONFIG_EEPRO100 1
	#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
	#define CONFIG_NS8382X 1

	#else /* MPC5100 */

	#define CONFIG_MII 1
	#define ADD_PCI_CMD 0 /* no CFG_CMD_PCI */

	#endif

	/* Partitions */
	#define CONFIG_MAC_PARTITION
	#define CONFIG_DOS_PARTITION
	#define CONFIG_ISO_PARTITION

	/* USB */
	#if 1
	#define CONFIG_USB_OHCI
	#define ADD_USB_CMD CFG_CMD_USB \| CFG_CMD_FAT
	#define CONFIG_USB_STORAGE
	#else
	#define ADD_USB_CMD 0
	#endif

	#define CONFIG_TIMESTAMP /* Print image info with timestamp */

	/*
	* Supported commands
	*/
	#define CONFIG_COMMANDS (CONFIG_CMD_DFL \| \
	CFG_CMD_EEPROM \| \
	CFG_CMD_FAT \| \
	CFG_CMD_I2C \| \
	CFG_CMD_IDE \| \
	CFG_CMD_NFS \| \
	CFG_CMD_SNTP \| \
	ADD_PCI_CMD \| \
	ADD_USB_CMD )

	/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
	#include <cmd_confdefs.h>

	#if (TEXT_BASE == 0xFF000000) /* Boot low with 16 MB Flash */
	# define CFG_LOWBOOT 1
	# define CFG_LOWBOOT16 1
	#endif
	#if (TEXT_BASE == 0xFF800000) /* Boot low with 8 MB Flash */
	#if defined(CONFIG_LITE5200B)
	# error CFG_LOWBOOT08 is incompatible with the Lite5200B
	#else
	# define CFG_LOWBOOT 1
	# define CFG_LOWBOOT08 1
	#endif
	#endif

	/*
	* Autobooting
	*/
	#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */

	#define CONFIG_PREBOOT "echo;" \
	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
	"echo"

	#undef CONFIG_BOOTARGS

	#define CONFIG_EXTRA_ENV_SETTINGS \
	"netdev=eth0\0" \
	"nfsargs=setenv bootargs root=/dev/nfs rw " \
	"nfsroot=${serverip}:${rootpath}\0" \
	"ramargs=setenv bootargs root=/dev/ram rw\0" \
	"addip=setenv bootargs ${bootargs} " \
	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
	":${hostname}:${netdev}:off panic=1\0" \
	"flash_nfs=run nfsargs addip;" \
	"bootm ${kernel_addr}\0" \
	"flash_self=run ramargs addip;" \
	"bootm ${kernel_addr} ${ramdisk_addr}\0" \
	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
	"rootpath=/opt/eldk/ppc_82xx\0" \
	"bootfile=/tftpboot/MPC5200/uImage\0" \
	""

	#define CONFIG_BOOTCOMMAND "run flash_self"

	#if defined(CONFIG_MPC5200)
	/*
	* IPB Bus clocking configuration.
	*/
	#if defined(CONFIG_LITE5200B)
	#define CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
	#else
	#undef CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
	#endif
	#endif /* CONFIG_MPC5200 */

	/* pass open firmware flat tree */
	#define CONFIG_OF_FLAT_TREE 1
	#define CONFIG_OF_BOARD_SETUP 1

	/* maximum size of the flat tree (8K) */
	#define OF_FLAT_TREE_MAX_SIZE 8192

	#define OF_CPU "PowerPC,5200@0"
	#define OF_SOC "soc5200@f0000000"
	#define OF_TBCLK (bd->bi_busfreq / 4)
	#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000"

	/*
	* I2C configuration
	*/
	#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
	#define CFG_I2C_MODULE 2 /* Select I2C module #1 or #2 */

	#define CFG_I2C_SPEED 100000 /* 100 kHz */
	#define CFG_I2C_SLAVE 0x7F

	/*
	* EEPROM configuration
	*/
	#define CFG_I2C_EEPROM_ADDR 0x50 /* 1010000x */
	#define CFG_I2C_EEPROM_ADDR_LEN 1
	#define CFG_EEPROM_PAGE_WRITE_BITS 3
	#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 70

	/*
	* Flash configuration
	*/
	#if defined(CONFIG_LITE5200B)
	#define CFG_FLASH_BASE 0xFE000000
	#define CFG_FLASH_SIZE 0x01000000
	#if !defined(CFG_LOWBOOT)
	#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x01760000 + 0x00800000)
	#else /* CFG_LOWBOOT */
	#if defined(CFG_LOWBOOT08)
	# error CFG_LOWBOOT08 is incompatible with the Lite5200B
	#endif
	#if defined(CFG_LOWBOOT16)
	#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x01060000)
	#endif
	#endif /* CFG_LOWBOOT */
	#else /* !CONFIG_LITE5200B (IceCube)*/
	#define CFG_FLASH_BASE 0xFF000000
	#define CFG_FLASH_SIZE 0x01000000
	#if !defined(CFG_LOWBOOT)
	#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00740000 + 0x00800000)
	#else /* CFG_LOWBOOT */
	#if defined(CFG_LOWBOOT08)
	#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00040000 + 0x00800000)
	#endif
	#if defined(CFG_LOWBOOT16)
	#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00040000)
	#endif
	#endif /* CFG_LOWBOOT */
	#endif /* CONFIG_LITE5200B */
	#define CFG_MAX_FLASH_BANKS 2 /* max num of memory banks */

	#define CFG_MAX_FLASH_SECT 128 /* max num of sects on one chip */

	#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
	#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */

	#undef CONFIG_FLASH_16BIT /* Flash is 8-bit */

	#if defined(CONFIG_LITE5200B)
	#define CFG_FLASH_CFI_DRIVER
	#define CFG_FLASH_CFI
	#define CFG_FLASH_BANKS_LIST {CFG_CS1_START,CFG_CS0_START}
	#endif


	/*
	* Environment settings
	*/
	#define CFG_ENV_IS_IN_FLASH 1
	#define CFG_ENV_SIZE 0x10000
	#if defined(CONFIG_LITE5200B)
	#define CFG_ENV_SECT_SIZE 0x20000
	#else
	#define CFG_ENV_SECT_SIZE 0x10000
	#endif
	#define CONFIG_ENV_OVERWRITE 1

	/*
	* Memory map
	*/
	#define CFG_MBAR 0xF0000000
	#define CFG_SDRAM_BASE 0x00000000
	#define CFG_DEFAULT_MBAR 0x80000000

	/* Use SRAM until RAM will be available */
	#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM
	#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE /* End of used area in DPRAM */


	#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
	#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
	#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET

	#define CFG_MONITOR_BASE TEXT_BASE
	#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
	# define CFG_RAMBOOT 1
	#endif

	#define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
	#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
	#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */

	/*
	* Ethernet configuration
	*/
	#define CONFIG_MPC5xxx_FEC 1
	/*
	* Define CONFIG_FEC_10MBIT to force FEC at 10Mb
	*/
	/* #define CONFIG_FEC_10MBIT 1 */
	#define CONFIG_PHY_ADDR 0x00
	#if defined(CONFIG_LITE5200B)
	#define CONFIG_FEC_MII100 1
	#endif

	/*
	* GPIO configuration
	*/
	#ifdef CONFIG_MPC5200_DDR
	#define CFG_GPS_PORT_CONFIG 0x90000004
	#else
	#define CFG_GPS_PORT_CONFIG 0x10000004
	#endif

	/*
	* Miscellaneous configurable options
	*/
	#define CFG_LONGHELP /* undef to save memory */
	#define CFG_PROMPT "=> " /* Monitor Command Prompt */
	#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
	#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
	#else
	#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
	#endif
	#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
	#define CFG_MAXARGS 16 /* max number of command args */
	#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */

	#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
	#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */

	#define CFG_LOAD_ADDR 0x100000 /* default load address */

	#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */

	/*
	* Various low-level settings
	*/
	#if defined(CONFIG_MPC5200)
	#define CFG_HID0_INIT HID0_ICE \| HID0_ICFI
	#define CFG_HID0_FINAL HID0_ICE
	#else
	#define CFG_HID0_INIT 0
	#define CFG_HID0_FINAL 0
	#endif

	#if defined(CONFIG_LITE5200B)
	#define CFG_CS1_START CFG_FLASH_BASE
	#define CFG_CS1_SIZE CFG_FLASH_SIZE
	#define CFG_CS1_CFG 0x00047800
	#define CFG_CS0_START (CFG_FLASH_BASE + CFG_FLASH_SIZE)
	#define CFG_CS0_SIZE CFG_FLASH_SIZE
	#define CFG_BOOTCS_START CFG_CS0_START
	#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE
	#define CFG_BOOTCS_CFG 0x00047800
	#else /* IceCube aka Lite5200 */
	#ifdef CONFIG_MPC5200_DDR

	#define CFG_BOOTCS_START (CFG_CS1_START + CFG_CS1_SIZE)
	#define CFG_BOOTCS_SIZE 0x00800000
	#define CFG_BOOTCS_CFG 0x00047801
	#define CFG_CS1_START CFG_FLASH_BASE
	#define CFG_CS1_SIZE 0x00800000
	#define CFG_CS1_CFG 0x00047800

	#else /* !CONFIG_MPC5200_DDR */

	#define CFG_BOOTCS_START CFG_FLASH_BASE
	#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE
	#define CFG_BOOTCS_CFG 0x00047801
	#define CFG_CS0_START CFG_FLASH_BASE
	#define CFG_CS0_SIZE CFG_FLASH_SIZE

	#endif /* CONFIG_MPC5200_DDR */
	#endif /CONFIG_LITE5200B /

	#define CFG_CS_BURST 0x00000000
	#define CFG_CS_DEADCYCLE 0x33333333

	#define CFG_RESET_ADDRESS 0xff000000

	/*-----------------------------------------------------------------------
	* USB stuff
	*-----------------------------------------------------------------------
	*/
	#define CONFIG_USB_CLOCK 0x0001BBBB
	#define CONFIG_USB_CONFIG 0x00001000

	/*-----------------------------------------------------------------------
	* IDE/ATA stuff Supports IDE harddisk
	*-----------------------------------------------------------------------
	*/

	#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */

	#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
	#undef CONFIG_IDE_LED /* LED for ide not supported */

	#define CONFIG_IDE_RESET /* reset for ide supported */
	#define CONFIG_IDE_PREINIT

	#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */
	#define CFG_IDE_MAXDEVICE 2 /* max. 1 drive per IDE bus */

	#define CFG_ATA_IDE0_OFFSET 0x0000

	#define CFG_ATA_BASE_ADDR MPC5XXX_ATA

	/* Offset for data I/O */
	#define CFG_ATA_DATA_OFFSET (0x0060)

	/* Offset for normal register accesses */
	#define CFG_ATA_REG_OFFSET (CFG_ATA_DATA_OFFSET)

	/* Offset for alternate registers */
	#define CFG_ATA_ALT_OFFSET (0x005C)

	/* Interval between registers */
	#define CFG_ATA_STRIDE 4

	#define CONFIG_ATAPI 1

	#endif /* __CONFIG_H */