| /* |
| * Device Tree file for the Guntermann & Drunck ControlCenter-Compact board |
| * |
| * Copyright (C) 2016 Mario Six <mario.six@gdsys.cc> |
| * |
| * based on the Device Tree file for Marvell Armada 388 evaluation board |
| * (DB-88F6820), which is |
| * |
| * Copyright (C) 2014 Marvell |
| * |
| * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| /dts-v1/; |
| |
| #include "armada-388.dtsi" |
| |
| &gpio0 { |
| u-boot,dm-pre-reloc; |
| }; |
| |
| &gpio1 { |
| u-boot,dm-pre-reloc; |
| }; |
| |
| &uart0 { |
| u-boot,dm-pre-reloc; |
| }; |
| |
| &uart1 { |
| u-boot,dm-pre-reloc; |
| }; |
| |
| / { |
| model = "Controlcenter Digital Compact"; |
| compatible = "marvell,a385-db", "marvell,armada388", |
| "marvell,armada385", "marvell,armada380"; |
| |
| chosen { |
| bootargs = "console=ttyS1,115200 earlyprintk"; |
| stdout-path = "/soc/internal-regs/serial@12100"; |
| }; |
| |
| aliases { |
| ethernet0 = ð0; |
| ethernet2 = ð2; |
| mdio-gpio0 = &MDIO0; |
| mdio-gpio1 = &MDIO1; |
| mdio-gpio2 = &MDIO2; |
| spi0 = &spi0; |
| spi1 = &spi1; |
| i2c0 = &I2C0; |
| i2c1 = &I2C1; |
| }; |
| |
| memory { |
| device_type = "memory"; |
| reg = <0x00000000 0x10000000>; /* 256 MB */ |
| }; |
| |
| clocks { |
| sc16isclk: sc16isclk { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <11059200>; |
| }; |
| }; |
| |
| soc { |
| ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 |
| MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>; |
| |
| internal-regs { |
| spi0: spi@10600 { |
| status = "okay"; |
| sc16is741: sc16is741@0 { |
| compatible = "nxp,sc16is741"; |
| reg = <0>; |
| clocks = <&sc16isclk>; |
| spi-max-frequency = <4000000>; |
| interrupt-parent = <&gpio0>; |
| interrupts = <11 IRQ_TYPE_EDGE_FALLING>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| }; |
| |
| spi1: spi@10680 { |
| status = "okay"; |
| u-boot,dm-pre-reloc; |
| spi-flash@0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "n25q016a"; |
| reg = <0>; /* Chip select 0 */ |
| spi-max-frequency = <108000000>; |
| }; |
| spi-flash@1 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "n25q128a11"; |
| reg = <1>; /* Chip select 1 */ |
| spi-max-frequency = <108000000>; |
| u-boot,dm-pre-reloc; |
| }; |
| }; |
| |
| I2C0: i2c@11000 { |
| status = "okay"; |
| clock-frequency = <1000000>; |
| u-boot,dm-pre-reloc; |
| PCA21: pca9698@21 { |
| compatible = "nxp,pca9698"; |
| reg = <0x21>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| }; |
| PCA22: pca9698@22 { |
| compatible = "nxp,pca9698"; |
| u-boot,dm-pre-reloc; |
| reg = <0x22>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| }; |
| PCA23: pca9698@23 { |
| compatible = "nxp,pca9698"; |
| reg = <0x23>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| }; |
| PCA24: pca9698@24 { |
| compatible = "nxp,pca9698"; |
| reg = <0x24>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| }; |
| PCA25: pca9698@25 { |
| compatible = "nxp,pca9698"; |
| reg = <0x25>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| }; |
| PCA26: pca9698@26 { |
| compatible = "nxp,pca9698"; |
| reg = <0x26>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| }; |
| }; |
| |
| I2C1: i2c@11100 { |
| status = "okay"; |
| clock-frequency = <400000>; |
| at97sc3205t@29 { |
| compatible = "atmel,at97sc3204t"; |
| reg = <0x29>; |
| u-boot,i2c-offset-len = <0>; |
| }; |
| emc2305@2d { |
| compatible = "smsc,emc2305"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x2d>; |
| fan@0 { |
| reg = <0>; |
| }; |
| fan@1 { |
| reg = <1>; |
| }; |
| fan@2 { |
| reg = <2>; |
| }; |
| fan@3 { |
| reg = <3>; |
| }; |
| fan@4 { |
| reg = <4>; |
| }; |
| }; |
| lm77@48 { |
| compatible = "national,lm77"; |
| reg = <0x48>; |
| }; |
| ads1015@49 { |
| compatible = "ti,ads1015"; |
| reg = <0x49>; |
| }; |
| lm77@4a { |
| compatible = "national,lm77"; |
| reg = <0x4a>; |
| }; |
| ads1015@4b { |
| compatible = "ti,ads1015"; |
| reg = <0x4b>; |
| }; |
| emc2305@4c { |
| compatible = "smsc,emc2305"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x4c>; |
| fan@0 { |
| reg = <0>; |
| }; |
| fan@1 { |
| reg = <1>; |
| }; |
| fan@2 { |
| reg = <2>; |
| }; |
| fan@3 { |
| reg = <3>; |
| }; |
| fan@4 { |
| reg = <4>; |
| }; |
| }; |
| at24c512@54 { |
| compatible = "atmel,24c512"; |
| reg = <0x54>; |
| u-boot,i2c-offset-len = <2>; |
| }; |
| ds1339@68 { |
| compatible = "dallas,ds1339"; |
| reg = <0x68>; |
| }; |
| }; |
| |
| serial@12000 { |
| status = "okay"; |
| }; |
| |
| serial@12100 { |
| status = "okay"; |
| }; |
| |
| ethernet@34000 { |
| status = "okay"; |
| phy = <&phy1>; |
| phy-mode = "sgmii"; |
| }; |
| |
| usb@58000 { |
| status = "ok"; |
| }; |
| |
| ethernet@70000 { |
| status = "okay"; |
| phy = <&phy0>; |
| phy-mode = "sgmii"; |
| }; |
| |
| mdio@72004 { |
| phy0: ethernet-phy@0 { |
| reg = <1>; |
| }; |
| |
| phy1: ethernet-phy@1 { |
| reg = <0>; |
| }; |
| }; |
| |
| sata@a8000 { |
| status = "okay"; |
| }; |
| |
| sdhci@d8000 { |
| broken-cd; |
| wp-inverted; |
| bus-width = <4>; |
| status = "okay"; |
| no-1-8-v; |
| }; |
| |
| usb3@f0000 { |
| status = "okay"; |
| }; |
| }; |
| |
| pcie-controller { |
| status = "okay"; |
| /* |
| * The two PCIe units are accessible through |
| * standard PCIe slots on the board. |
| */ |
| pcie@3,0 { |
| /* Port 0, Lane 0 */ |
| status = "okay"; |
| }; |
| }; |
| |
| MDIO0: mdio0 { |
| compatible = "virtual,mdio-gpio"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| gpios = < /*MDC*/ &gpio0 13 0 |
| /*MDIO*/ &gpio0 14 0>; |
| mv88e1240@0 { |
| reg = <0x0>; |
| }; |
| mv88e1240@1 { |
| reg = <0x1>; |
| }; |
| mv88e1240@2 { |
| reg = <0x2>; |
| }; |
| mv88e1240@3 { |
| reg = <0x3>; |
| }; |
| mv88e1240@4 { |
| reg = <0x4>; |
| }; |
| mv88e1240@5 { |
| reg = <0x5>; |
| }; |
| mv88e1240@6 { |
| reg = <0x6>; |
| }; |
| mv88e1240@7 { |
| reg = <0x7>; |
| }; |
| mv88e1240@8 { |
| reg = <0x8>; |
| }; |
| mv88e1240@9 { |
| reg = <0x9>; |
| }; |
| mv88e1240@a { |
| reg = <0xa>; |
| }; |
| mv88e1240@b { |
| reg = <0xb>; |
| }; |
| mv88e1240@c { |
| reg = <0xc>; |
| }; |
| mv88e1240@d { |
| reg = <0xd>; |
| }; |
| mv88e1240@e { |
| reg = <0xe>; |
| }; |
| mv88e1240@f { |
| reg = <0xf>; |
| }; |
| mv88e1240@10 { |
| reg = <0x10>; |
| }; |
| mv88e1240@11 { |
| reg = <0x11>; |
| }; |
| mv88e1240@12 { |
| reg = <0x12>; |
| }; |
| mv88e1240@13 { |
| reg = <0x13>; |
| }; |
| mv88e1240@14 { |
| reg = <0x14>; |
| }; |
| mv88e1240@15 { |
| reg = <0x15>; |
| }; |
| mv88e1240@16 { |
| reg = <0x16>; |
| }; |
| mv88e1240@17 { |
| reg = <0x17>; |
| }; |
| mv88e1240@18 { |
| reg = <0x18>; |
| }; |
| mv88e1240@19 { |
| reg = <0x19>; |
| }; |
| mv88e1240@1a { |
| reg = <0x1a>; |
| }; |
| mv88e1240@1b { |
| reg = <0x1b>; |
| }; |
| mv88e1240@1c { |
| reg = <0x1c>; |
| }; |
| mv88e1240@1d { |
| reg = <0x1d>; |
| }; |
| mv88e1240@1e { |
| reg = <0x1e>; |
| }; |
| mv88e1240@1f { |
| reg = <0x1f>; |
| }; |
| }; |
| |
| MDIO1: mdio1 { |
| compatible = "virtual,mdio-gpio"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| gpios = < /*MDC*/ &gpio0 25 0 |
| /*MDIO*/ &gpio1 13 0>; |
| mv88e1240@0 { |
| reg = <0x0>; |
| }; |
| mv88e1240@1 { |
| reg = <0x1>; |
| }; |
| mv88e1240@2 { |
| reg = <0x2>; |
| }; |
| mv88e1240@3 { |
| reg = <0x3>; |
| }; |
| mv88e1240@4 { |
| reg = <0x4>; |
| }; |
| mv88e1240@5 { |
| reg = <0x5>; |
| }; |
| mv88e1240@6 { |
| reg = <0x6>; |
| }; |
| mv88e1240@7 { |
| reg = <0x7>; |
| }; |
| mv88e1240@8 { |
| reg = <0x8>; |
| }; |
| mv88e1240@9 { |
| reg = <0x9>; |
| }; |
| mv88e1240@a { |
| reg = <0xa>; |
| }; |
| mv88e1240@b { |
| reg = <0xb>; |
| }; |
| mv88e1240@c { |
| reg = <0xc>; |
| }; |
| mv88e1240@d { |
| reg = <0xd>; |
| }; |
| mv88e1240@e { |
| reg = <0xe>; |
| }; |
| mv88e1240@f { |
| reg = <0xf>; |
| }; |
| mv88e1240@10 { |
| reg = <0x10>; |
| }; |
| mv88e1240@11 { |
| reg = <0x11>; |
| }; |
| mv88e1240@12 { |
| reg = <0x12>; |
| }; |
| mv88e1240@13 { |
| reg = <0x13>; |
| }; |
| mv88e1240@14 { |
| reg = <0x14>; |
| }; |
| mv88e1240@15 { |
| reg = <0x15>; |
| }; |
| mv88e1240@16 { |
| reg = <0x16>; |
| }; |
| mv88e1240@17 { |
| reg = <0x17>; |
| }; |
| mv88e1240@18 { |
| reg = <0x18>; |
| }; |
| mv88e1240@19 { |
| reg = <0x19>; |
| }; |
| mv88e1240@1a { |
| reg = <0x1a>; |
| }; |
| mv88e1240@1b { |
| reg = <0x1b>; |
| }; |
| mv88e1240@1c { |
| reg = <0x1c>; |
| }; |
| mv88e1240@1d { |
| reg = <0x1d>; |
| }; |
| mv88e1240@1e { |
| reg = <0x1e>; |
| }; |
| mv88e1240@1f { |
| reg = <0x1f>; |
| }; |
| }; |
| |
| MDIO2: mdio2 { |
| compatible = "virtual,mdio-gpio"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| gpios = < /*MDC*/ &gpio1 14 0 |
| /*MDIO*/ &gpio0 24 0>; |
| mv88e1240@0 { |
| reg = <0x0>; |
| }; |
| mv88e1240@1 { |
| reg = <0x1>; |
| }; |
| mv88e1240@2 { |
| reg = <0x2>; |
| }; |
| mv88e1240@3 { |
| reg = <0x3>; |
| }; |
| mv88e1240@4 { |
| reg = <0x4>; |
| }; |
| mv88e1240@5 { |
| reg = <0x5>; |
| }; |
| mv88e1240@6 { |
| reg = <0x6>; |
| }; |
| mv88e1240@7 { |
| reg = <0x7>; |
| }; |
| mv88e1240@8 { |
| reg = <0x8>; |
| }; |
| mv88e1240@9 { |
| reg = <0x9>; |
| }; |
| mv88e1240@a { |
| reg = <0xa>; |
| }; |
| mv88e1240@b { |
| reg = <0xb>; |
| }; |
| mv88e1240@c { |
| reg = <0xc>; |
| }; |
| mv88e1240@d { |
| reg = <0xd>; |
| }; |
| mv88e1240@e { |
| reg = <0xe>; |
| }; |
| mv88e1240@f { |
| reg = <0xf>; |
| }; |
| mv88e1240@10 { |
| reg = <0x10>; |
| }; |
| mv88e1240@11 { |
| reg = <0x11>; |
| }; |
| mv88e1240@12 { |
| reg = <0x12>; |
| }; |
| mv88e1240@13 { |
| reg = <0x13>; |
| }; |
| mv88e1240@14 { |
| reg = <0x14>; |
| }; |
| mv88e1240@15 { |
| reg = <0x15>; |
| }; |
| }; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| |
| finder_led { |
| label = "finder-led"; |
| gpios = <&PCA22 25 0>; |
| }; |
| |
| status_led { |
| label = "status-led"; |
| gpios = <&gpio0 29 0>; |
| }; |
| }; |
| }; |