| /* |
| * Copyright (C) 2016 Freescale Semiconductor, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| /dts-v1/; |
| |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/input/input.h> |
| #include "imx6sll.dtsi" |
| |
| / { |
| model = "Freescale i.MX6SLL EVK Board"; |
| compatible = "fsl,imx6sll-evk", "fsl,imx6sll"; |
| |
| memory { |
| reg = <0x80000000 0x80000000>; |
| }; |
| |
| backlight { |
| compatible = "pwm-backlight"; |
| pwms = <&pwm1 0 5000000>; |
| brightness-levels = <0 4 8 16 32 64 128 255>; |
| default-brightness-level = <6>; |
| status = "okay"; |
| }; |
| |
| battery: max8903@0 { |
| compatible = "fsl,max8903-charger"; |
| pinctrl-names = "default"; |
| dok_input = <&gpio4 13 1>; |
| uok_input = <&gpio4 13 1>; |
| chg_input = <&gpio4 15 1>; |
| flt_input = <&gpio4 14 1>; |
| fsl,dcm_always_high; |
| fsl,dc_valid; |
| fsl,adc_disable; |
| status = "okay"; |
| }; |
| |
| pxp_v4l2_out { |
| compatible = "fsl,imx6sl-pxp-v4l2"; |
| status = "okay"; |
| }; |
| |
| regulators { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| reg_usb_otg1_vbus: regulator@0 { |
| compatible = "regulator-fixed"; |
| reg = <0>; |
| regulator-name = "usb_otg1_vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_usb_otg2_vbus: regulator@1 { |
| compatible = "regulator-fixed"; |
| reg = <1>; |
| regulator-name = "usb_otg2_vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_aud3v: regulator@2 { |
| compatible = "regulator-fixed"; |
| reg = <2>; |
| regulator-name = "wm8962-supply-3v15"; |
| regulator-min-microvolt = <3150000>; |
| regulator-max-microvolt = <3150000>; |
| regulator-boot-on; |
| }; |
| |
| reg_aud4v: regulator@3 { |
| compatible = "regulator-fixed"; |
| reg = <3>; |
| regulator-name = "wm8962-supply-4v2"; |
| regulator-min-microvolt = <4325000>; |
| regulator-max-microvolt = <4325000>; |
| regulator-boot-on; |
| }; |
| |
| reg_lcd: regulator@4 { |
| compatible = "regulator-fixed"; |
| reg = <4>; |
| regulator-name = "lcd-pwr"; |
| gpio = <&gpio4 8 0>; |
| enable-active-high; |
| }; |
| |
| reg_sd1_vmmc: sd1_vmmc { |
| compatible = "regulator-fixed"; |
| regulator-name = "SD1_SPWR"; |
| regulator-min-microvolt = <3000000>; |
| regulator-max-microvolt = <3000000>; |
| gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_sd2_vmmc: sd2_vmmc { |
| compatible = "regulator-fixed"; |
| regulator-name = "eMMC-VCCQ"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-boot-on; |
| }; |
| |
| reg_sd3_vmmc: sd3_vmmc { |
| compatible = "regulator-fixed"; |
| regulator-name = "SD3_WIFI"; |
| regulator-min-microvolt = <3000000>; |
| regulator-max-microvolt = <3000000>; |
| gpio = <&gpio4 4 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| }; |
| |
| sound { |
| compatible = "fsl,imx6sl-evk-wm8962", "fsl,imx-audio-wm8962"; |
| model = "wm8962-audio"; |
| cpu-dai = <&ssi2>; |
| audio-codec = <&codec>; |
| audio-routing = |
| "Headphone Jack", "HPOUTL", |
| "Headphone Jack", "HPOUTR", |
| "Ext Spk", "SPKOUTL", |
| "Ext Spk", "SPKOUTR", |
| "AMIC", "MICBIAS", |
| "IN3R", "AMIC"; |
| mux-int-port = <2>; |
| mux-ext-port = <3>; |
| codec-master; |
| hp-det-gpios = <&gpio4 24 1>; |
| }; |
| }; |
| |
| &audmux { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_audmux3>; |
| status = "okay"; |
| }; |
| |
| &clks { |
| assigned-clocks = <&clks IMX6SLL_CLK_PLL4_AUDIO_DIV>; |
| assigned-clock-rates = <393216000>; |
| }; |
| |
| &cpu0 { |
| arm-supply = <&sw1a_reg>; |
| soc-supply = <&sw1c_reg>; |
| }; |
| |
| &i2c1 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c1>; |
| status = "okay"; |
| |
| pmic: pfuze100@08 { |
| compatible = "fsl,pfuze100"; |
| reg = <0x08>; |
| |
| regulators { |
| sw1a_reg: sw1ab { |
| regulator-min-microvolt = <300000>; |
| regulator-max-microvolt = <1875000>; |
| regulator-boot-on; |
| regulator-always-on; |
| regulator-ramp-delay = <6250>; |
| }; |
| |
| sw1c_reg: sw1c { |
| regulator-min-microvolt = <300000>; |
| regulator-max-microvolt = <1875000>; |
| regulator-boot-on; |
| regulator-always-on; |
| regulator-ramp-delay = <6250>; |
| }; |
| |
| sw2_reg: sw2 { |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| sw3a_reg: sw3a { |
| regulator-min-microvolt = <400000>; |
| regulator-max-microvolt = <1975000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| sw3b_reg: sw3b { |
| regulator-min-microvolt = <400000>; |
| regulator-max-microvolt = <1975000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| sw4_reg: sw4 { |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| swbst_reg: swbst { |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5150000>; |
| }; |
| |
| snvs_reg: vsnvs { |
| regulator-min-microvolt = <1000000>; |
| regulator-max-microvolt = <3000000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| vref_reg: vrefddr { |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| vgen1_reg: vgen1 { |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <1550000>; |
| regulator-always-on; |
| }; |
| |
| vgen2_reg: vgen2 { |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <1550000>; |
| }; |
| |
| vgen3_reg: vgen3 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| vgen4_reg: vgen4 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| vgen5_reg: vgen5 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| vgen6_reg: vgen6 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| }; |
| }; |
| |
| max17135: max17135@48 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_max17135>; |
| compatible = "maxim,max17135"; |
| reg = <0x48>; |
| status = "okay"; |
| |
| vneg_pwrup = <1>; |
| gvee_pwrup = <2>; |
| vpos_pwrup = <10>; |
| gvdd_pwrup = <12>; |
| gvdd_pwrdn = <1>; |
| vpos_pwrdn = <2>; |
| gvee_pwrdn = <8>; |
| vneg_pwrdn = <10>; |
| gpio_pmic_pwrgood = <&gpio2 13 0>; |
| gpio_pmic_vcom_ctrl = <&gpio2 3 0>; |
| gpio_pmic_wakeup = <&gpio2 14 0>; |
| gpio_pmic_v3p3 = <&gpio2 7 0>; |
| gpio_pmic_intr = <&gpio2 12 0>; |
| |
| regulators { |
| DISPLAY_reg: DISPLAY { |
| regulator-name = "DISPLAY"; |
| }; |
| |
| GVDD_reg: GVDD { |
| /* 20v */ |
| regulator-name = "GVDD"; |
| }; |
| |
| GVEE_reg: GVEE { |
| /* -22v */ |
| regulator-name = "GVEE"; |
| }; |
| |
| HVINN_reg: HVINN { |
| /* -22v */ |
| regulator-name = "HVINN"; |
| }; |
| |
| HVINP_reg: HVINP { |
| /* 20v */ |
| regulator-name = "HVINP"; |
| }; |
| |
| VCOM_reg: VCOM { |
| regulator-name = "VCOM"; |
| /* 2's-compliment, -4325000 */ |
| regulator-min-microvolt = <0xffbe0178>; |
| /* 2's-compliment, -500000 */ |
| regulator-max-microvolt = <0xfff85ee0>; |
| }; |
| |
| VNEG_reg: VNEG { |
| /* -15v */ |
| regulator-name = "VNEG"; |
| }; |
| |
| VPOS_reg: VPOS { |
| /* 15v */ |
| regulator-name = "VPOS"; |
| }; |
| |
| V3P3_reg: V3P3 { |
| regulator-name = "V3P3"; |
| }; |
| }; |
| }; |
| }; |
| |
| &i2c3 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c3>; |
| status = "okay"; |
| |
| codec: wm8962@1a { |
| compatible = "wlf,wm8962"; |
| reg = <0x1a>; |
| clocks = <&clks IMX6SLL_CLK_EXTERN_AUDIO>; |
| DCVDD-supply = <&vgen3_reg>; |
| DBVDD-supply = <®_aud3v>; |
| AVDD-supply = <&vgen3_reg>; |
| CPVDD-supply = <&vgen3_reg>; |
| MICVDD-supply = <®_aud3v>; |
| PLLVDD-supply = <&vgen3_reg>; |
| SPKVDD1-supply = <®_aud4v>; |
| SPKVDD2-supply = <®_aud4v>; |
| amic-mono; |
| }; |
| }; |
| |
| &gpc { |
| fsl,ldo-bypass = <1>; |
| }; |
| |
| &iomuxc { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_hog>; |
| |
| imx6sll-evk { |
| pinctrl_hog: hoggrp { |
| fsl,pins = < |
| MX6SLL_PAD_KEY_ROW7__GPIO4_IO07 0x17059 |
| MX6SLL_PAD_GPIO4_IO22__GPIO4_IO22 0x17059 |
| MX6SLL_PAD_KEY_COL3__GPIO3_IO30 0x17059 |
| /* |
| * Must set the LVE of pad SD2_RESET, otherwise current |
| * leakage through eMMC chip will pull high the VCCQ to |
| * 2.6v, which will impact SD1 and SD3 SD3.0 voltage switch. |
| */ |
| MX6SLL_PAD_SD2_RESET__GPIO4_IO27 0x417059 |
| MX6SLL_PAD_KEY_COL4__GPIO4_IO00 0x17059 |
| MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059 /* SD3 CD */ |
| MX6SLL_PAD_KEY_COL6__GPIO4_IO04 0x17059 /*SD3 RESET */ |
| MX6SLL_PAD_KEY_COL5__GPIO4_IO02 0x17059 |
| MX6SLL_PAD_GPIO4_IO24__GPIO4_IO24 0x17059 /* HP DETECT */ |
| /* CHG_FLT, CHG_UOK/DOK, CHG_STATUS */ |
| MX6SLL_PAD_ECSPI2_MISO__GPIO4_IO14 0x17000 |
| MX6SLL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x17000 |
| MX6SLL_PAD_ECSPI2_SS0__GPIO4_IO15 0x17000 |
| >; |
| }; |
| |
| pinctrl_audmux3: audmux3grp { |
| fsl,pins = < |
| MX6SLL_PAD_AUD_TXC__AUD3_TXC 0x4130b0 |
| MX6SLL_PAD_AUD_TXFS__AUD3_TXFS 0x4130b0 |
| MX6SLL_PAD_AUD_TXD__AUD3_TXD 0x4110b0 |
| MX6SLL_PAD_AUD_RXD__AUD3_RXD 0x4130b0 |
| MX6SLL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x4130b0 |
| >; |
| }; |
| |
| pinctrl_csi1: csi1grp { |
| fsl,pins = < |
| MX6SLL_PAD_EPDC_GDRL__CSI_MCLK 0x1b088 |
| MX6SLL_PAD_EPDC_GDCLK__CSI_PIXCLK 0x1b088 |
| MX6SLL_PAD_EPDC_GDSP__CSI_VSYNC 0x1b088 |
| MX6SLL_PAD_EPDC_GDOE__CSI_HSYNC 0x1b088 |
| MX6SLL_PAD_EPDC_DATA02__CSI_DATA02 0x1b088 |
| MX6SLL_PAD_EPDC_DATA03__CSI_DATA03 0x1b088 |
| MX6SLL_PAD_EPDC_DATA04__CSI_DATA04 0x1b088 |
| MX6SLL_PAD_EPDC_DATA05__CSI_DATA05 0x1b088 |
| MX6SLL_PAD_EPDC_DATA06__CSI_DATA06 0x1b088 |
| MX6SLL_PAD_EPDC_DATA07__CSI_DATA07 0x1b088 |
| MX6SLL_PAD_EPDC_SDCLK__CSI_DATA08 0x1b088 |
| MX6SLL_PAD_EPDC_SDLE__CSI_DATA09 0x1b088 |
| MX6SLL_PAD_EPDC_SDSHR__GPIO1_IO26 0x80000000 |
| MX6SLL_PAD_EPDC_SDOE__GPIO1_IO25 0x80000000 |
| >; |
| }; |
| |
| pinctrl_epdc0: epdcgrp0 { |
| fsl,pins = < |
| MX6SLL_PAD_EPDC_DATA00__EPDC_DATA00 0x100b1 |
| MX6SLL_PAD_EPDC_DATA01__EPDC_DATA01 0x100b1 |
| MX6SLL_PAD_EPDC_DATA02__EPDC_DATA02 0x100b1 |
| MX6SLL_PAD_EPDC_DATA03__EPDC_DATA03 0x100b1 |
| MX6SLL_PAD_EPDC_DATA04__EPDC_DATA04 0x100b1 |
| MX6SLL_PAD_EPDC_DATA05__EPDC_DATA05 0x100b1 |
| MX6SLL_PAD_EPDC_DATA06__EPDC_DATA06 0x100b1 |
| MX6SLL_PAD_EPDC_DATA07__EPDC_DATA07 0x100b1 |
| MX6SLL_PAD_EPDC_DATA08__EPDC_DATA08 0x100b1 |
| MX6SLL_PAD_EPDC_DATA09__EPDC_DATA09 0x100b1 |
| MX6SLL_PAD_EPDC_DATA10__EPDC_DATA10 0x100b1 |
| MX6SLL_PAD_EPDC_DATA11__EPDC_DATA11 0x100b1 |
| MX6SLL_PAD_EPDC_DATA12__EPDC_DATA12 0x100b1 |
| MX6SLL_PAD_EPDC_DATA13__EPDC_DATA13 0x100b1 |
| MX6SLL_PAD_EPDC_DATA14__EPDC_DATA14 0x100b1 |
| MX6SLL_PAD_EPDC_DATA15__EPDC_DATA15 0x100b1 |
| MX6SLL_PAD_EPDC_SDCLK__EPDC_SDCLK_P 0x100b1 |
| MX6SLL_PAD_EPDC_SDLE__EPDC_SDLE 0x100b1 |
| MX6SLL_PAD_EPDC_SDOE__EPDC_SDOE 0x100b1 |
| MX6SLL_PAD_EPDC_SDSHR__EPDC_SDSHR 0x100b1 |
| MX6SLL_PAD_EPDC_SDCE0__EPDC_SDCE0 0x100b1 |
| MX6SLL_PAD_EPDC_GDCLK__EPDC_GDCLK 0x100b1 |
| MX6SLL_PAD_EPDC_GDOE__EPDC_GDOE 0x100b1 |
| MX6SLL_PAD_EPDC_GDRL__EPDC_GDRL 0x100b1 |
| MX6SLL_PAD_EPDC_GDSP__EPDC_GDSP 0x100b1 |
| >; |
| }; |
| |
| pinctrl_lcdif_dat: lcdifdatgrp { |
| fsl,pins = < |
| MX6SLL_PAD_LCD_DATA00__LCD_DATA00 0x79 |
| MX6SLL_PAD_LCD_DATA01__LCD_DATA01 0x79 |
| MX6SLL_PAD_LCD_DATA02__LCD_DATA02 0x79 |
| MX6SLL_PAD_LCD_DATA03__LCD_DATA03 0x79 |
| MX6SLL_PAD_LCD_DATA04__LCD_DATA04 0x79 |
| MX6SLL_PAD_LCD_DATA05__LCD_DATA05 0x79 |
| MX6SLL_PAD_LCD_DATA06__LCD_DATA06 0x79 |
| MX6SLL_PAD_LCD_DATA07__LCD_DATA07 0x79 |
| MX6SLL_PAD_LCD_DATA08__LCD_DATA08 0x79 |
| MX6SLL_PAD_LCD_DATA09__LCD_DATA09 0x79 |
| MX6SLL_PAD_LCD_DATA10__LCD_DATA10 0x79 |
| MX6SLL_PAD_LCD_DATA11__LCD_DATA11 0x79 |
| MX6SLL_PAD_LCD_DATA12__LCD_DATA12 0x79 |
| MX6SLL_PAD_LCD_DATA13__LCD_DATA13 0x79 |
| MX6SLL_PAD_LCD_DATA14__LCD_DATA14 0x79 |
| MX6SLL_PAD_LCD_DATA15__LCD_DATA15 0x79 |
| MX6SLL_PAD_LCD_DATA16__LCD_DATA16 0x79 |
| MX6SLL_PAD_LCD_DATA17__LCD_DATA17 0x79 |
| MX6SLL_PAD_LCD_DATA18__LCD_DATA18 0x79 |
| MX6SLL_PAD_LCD_DATA19__LCD_DATA19 0x79 |
| MX6SLL_PAD_LCD_DATA20__LCD_DATA20 0x79 |
| MX6SLL_PAD_LCD_DATA21__LCD_DATA21 0x79 |
| MX6SLL_PAD_LCD_DATA22__LCD_DATA22 0x79 |
| MX6SLL_PAD_LCD_DATA23__LCD_DATA23 0x79 |
| >; |
| }; |
| |
| pinctrl_lcdif_ctrl: lcdifctrlgrp { |
| fsl,pins = < |
| MX6SLL_PAD_LCD_CLK__LCD_CLK 0x79 |
| MX6SLL_PAD_LCD_ENABLE__LCD_ENABLE 0x79 |
| MX6SLL_PAD_LCD_HSYNC__LCD_HSYNC 0x79 |
| MX6SLL_PAD_LCD_VSYNC__LCD_VSYNC 0x79 |
| MX6SLL_PAD_LCD_RESET__LCD_RESET 0x79 |
| MX6SLL_PAD_ECSPI1_SCLK__GPIO4_IO08 0x79 |
| >; |
| }; |
| |
| pinctrl_max17135: max17135grp-1 { |
| fsl,pins = < |
| MX6SLL_PAD_EPDC_PWR_STAT__GPIO2_IO13 0x80000000 /* pwrgood */ |
| MX6SLL_PAD_EPDC_VCOM0__GPIO2_IO03 0x80000000 /* vcom_ctrl */ |
| MX6SLL_PAD_EPDC_PWR_WAKE__GPIO2_IO14 0x80000000 /* wakeup */ |
| MX6SLL_PAD_EPDC_PWR_CTRL0__GPIO2_IO07 0x80000000 /* v3p3 */ |
| MX6SLL_PAD_EPDC_PWR_IRQ__GPIO2_IO12 0x80000000 /* pwr int */ |
| >; |
| }; |
| |
| pinctrl_spdif: spdifgrp { |
| fsl,pins = < |
| MX6SLL_PAD_SD2_DATA4__SPDIF_OUT 0x4130b0 |
| >; |
| }; |
| |
| pinctrl_uart1: uart1grp { |
| fsl,pins = < |
| MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x1b0b1 |
| MX6SLL_PAD_UART1_RXD__UART1_DCE_RX 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_uart5: uart5grp { |
| fsl,pins = < |
| MX6SLL_PAD_KEY_ROW1__GPIO3_IO27 0x1b0b1 /* bt reg on */ |
| MX6SLL_PAD_ECSPI1_MOSI__UART5_DCE_TX 0x1b0b1 |
| MX6SLL_PAD_ECSPI1_SCLK__UART5_DCE_RX 0x1b0b1 |
| MX6SLL_PAD_ECSPI1_SS0__UART5_DCE_CTS 0x1b0b1 |
| MX6SLL_PAD_ECSPI1_MISO__UART5_DCE_RTS 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_uart5dte: uart5dtegrp { |
| fsl,pins = < |
| MX6SLL_PAD_ECSPI1_MOSI__UART5_DTE_RX 0x1b0b1 |
| MX6SLL_PAD_ECSPI1_SCLK__UART5_DTE_TX 0x1b0b1 |
| MX6SLL_PAD_ECSPI1_SS0__UART5_DTE_RTS 0x1b0b1 |
| MX6SLL_PAD_ECSPI1_MISO__UART5_DTE_CTS 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_usdhc1: usdhc1grp { |
| fsl,pins = < |
| MX6SLL_PAD_SD1_CMD__SD1_CMD 0x17059 |
| MX6SLL_PAD_SD1_CLK__SD1_CLK 0x13059 |
| MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x17059 |
| MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x17059 |
| MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x17059 |
| MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x17059 |
| >; |
| }; |
| |
| pinctrl_usdhc1_100mhz: usdhc1grp_100mhz { |
| fsl,pins = < |
| MX6SLL_PAD_SD1_CMD__SD1_CMD 0x170b9 |
| MX6SLL_PAD_SD1_CLK__SD1_CLK 0x130b9 |
| MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x170b9 |
| MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x170b9 |
| MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x170b9 |
| MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x170b9 |
| >; |
| }; |
| |
| pinctrl_usdhc1_200mhz: usdhc1grp_200mhz { |
| fsl,pins = < |
| MX6SLL_PAD_SD1_CMD__SD1_CMD 0x170f9 |
| MX6SLL_PAD_SD1_CLK__SD1_CLK 0x130f9 |
| MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x170f9 |
| MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x170f9 |
| MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x170f9 |
| MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x170f9 |
| >; |
| }; |
| |
| pinctrl_usdhc2: usdhc2grp { |
| fsl,pins = < |
| MX6SLL_PAD_SD2_CMD__SD2_CMD 0x17059 |
| MX6SLL_PAD_SD2_CLK__SD2_CLK 0x13059 |
| MX6SLL_PAD_SD2_DATA0__SD2_DATA0 0x17059 |
| MX6SLL_PAD_SD2_DATA1__SD2_DATA1 0x17059 |
| MX6SLL_PAD_SD2_DATA2__SD2_DATA2 0x17059 |
| MX6SLL_PAD_SD2_DATA3__SD2_DATA3 0x17059 |
| MX6SLL_PAD_SD2_DATA4__SD2_DATA4 0x17059 |
| MX6SLL_PAD_SD2_DATA5__SD2_DATA5 0x17059 |
| MX6SLL_PAD_SD2_DATA6__SD2_DATA6 0x17059 |
| MX6SLL_PAD_SD2_DATA7__SD2_DATA7 0x17059 |
| MX6SLL_PAD_GPIO4_IO21__SD2_STROBE 0x413059 |
| >; |
| }; |
| |
| pinctrl_usdhc2_100mhz: usdhc2grp_100mhz { |
| fsl,pins = < |
| MX6SLL_PAD_SD2_CMD__SD2_CMD 0x170b9 |
| MX6SLL_PAD_SD2_CLK__SD2_CLK 0x130b9 |
| MX6SLL_PAD_SD2_DATA0__SD2_DATA0 0x170b9 |
| MX6SLL_PAD_SD2_DATA1__SD2_DATA1 0x170b9 |
| MX6SLL_PAD_SD2_DATA2__SD2_DATA2 0x170b9 |
| MX6SLL_PAD_SD2_DATA3__SD2_DATA3 0x170b9 |
| MX6SLL_PAD_SD2_DATA4__SD2_DATA4 0x170b9 |
| MX6SLL_PAD_SD2_DATA5__SD2_DATA5 0x170b9 |
| MX6SLL_PAD_SD2_DATA6__SD2_DATA6 0x170b9 |
| MX6SLL_PAD_SD2_DATA7__SD2_DATA7 0x170b9 |
| MX6SLL_PAD_GPIO4_IO21__SD2_STROBE 0x4130b9 |
| >; |
| }; |
| |
| pinctrl_usdhc2_200mhz: usdhc2grp_200mhz { |
| fsl,pins = < |
| MX6SLL_PAD_SD2_CMD__SD2_CMD 0x170f9 |
| MX6SLL_PAD_SD2_CLK__SD2_CLK 0x130f9 |
| MX6SLL_PAD_SD2_DATA0__SD2_DATA0 0x170f9 |
| MX6SLL_PAD_SD2_DATA1__SD2_DATA1 0x170f9 |
| MX6SLL_PAD_SD2_DATA2__SD2_DATA2 0x170f9 |
| MX6SLL_PAD_SD2_DATA3__SD2_DATA3 0x170f9 |
| MX6SLL_PAD_SD2_DATA4__SD2_DATA4 0x170f9 |
| MX6SLL_PAD_SD2_DATA5__SD2_DATA5 0x170f9 |
| MX6SLL_PAD_SD2_DATA6__SD2_DATA6 0x170f9 |
| MX6SLL_PAD_SD2_DATA7__SD2_DATA7 0x170f9 |
| MX6SLL_PAD_GPIO4_IO21__SD2_STROBE 0x4130f9 |
| >; |
| }; |
| |
| pinctrl_usdhc3: usdhc3grp { |
| fsl,pins = < |
| MX6SLL_PAD_SD3_CMD__SD3_CMD 0x17059 |
| MX6SLL_PAD_SD3_CLK__SD3_CLK 0x13059 |
| MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x17059 |
| MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x17059 |
| MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x17059 |
| MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x17059 |
| >; |
| }; |
| |
| pinctrl_usdhc3_100mhz: usdhc3grp_100mhz { |
| fsl,pins = < |
| MX6SLL_PAD_SD3_CMD__SD3_CMD 0x170b9 |
| MX6SLL_PAD_SD3_CLK__SD3_CLK 0x130b9 |
| MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x170b9 |
| MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x170b9 |
| MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x170b9 |
| MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x170b9 |
| >; |
| }; |
| |
| pinctrl_usdhc3_200mhz: usdhc3grp_200mhz { |
| fsl,pins = < |
| MX6SLL_PAD_SD3_CMD__SD3_CMD 0x170f9 |
| MX6SLL_PAD_SD3_CLK__SD3_CLK 0x130f9 |
| MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x170f9 |
| MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x170f9 |
| MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x170f9 |
| MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x170f9 |
| >; |
| }; |
| |
| pinctrl_usbotg1: usbotg1grp { |
| fsl,pins = < |
| MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x17059 |
| >; |
| }; |
| |
| pinctrl_i2c1: i2c1grp { |
| fsl,pins = < |
| MX6SLL_PAD_I2C1_SCL__I2C1_SCL 0x4001b8b1 |
| MX6SLL_PAD_I2C1_SDA__I2C1_SDA 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_i2c3: i2c3grp { |
| fsl,pins = < |
| MX6SLL_PAD_AUD_RXFS__I2C3_SCL 0x4041b8b1 |
| MX6SLL_PAD_AUD_RXC__I2C3_SDA 0x4041b8b1 |
| >; |
| }; |
| |
| pinctrl_pwm1: pmw1grp { |
| fsl,pins = < |
| MX6SLL_PAD_PWM1__PWM1_OUT 0x110b0 |
| >; |
| }; |
| }; |
| }; |
| |
| &lcdif { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_lcdif_dat |
| &pinctrl_lcdif_ctrl>; |
| lcd-supply = <®_lcd>; |
| display = <&display>; |
| status = "okay"; |
| |
| display: display { |
| bits-per-pixel = <16>; |
| bus-width = <24>; |
| |
| display-timings { |
| native-mode = <&timing0>; |
| timing0: timing0 { |
| clock-frequency = <33500000>; |
| hactive = <800>; |
| vactive = <480>; |
| hback-porch = <89>; |
| hfront-porch = <164>; |
| vback-porch = <23>; |
| vfront-porch = <10>; |
| hsync-len = <10>; |
| vsync-len = <10>; |
| hsync-active = <0>; |
| vsync-active = <0>; |
| de-active = <1>; |
| pixelclk-active = <0>; |
| }; |
| }; |
| }; |
| }; |
| |
| &pxp { |
| status = "okay"; |
| }; |
| |
| &pwm1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm1>; |
| status = "okay"; |
| }; |
| |
| &uart1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart1>; |
| status = "okay"; |
| }; |
| |
| &uart5 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart5>; |
| fsl,uart-has-rtscts; |
| /* for DTE mode, add below change */ |
| /* fsl,dte-mode; */ |
| /* pinctrl-0 = <&pinctrl_uart5dte>; */ |
| status = "disabled"; |
| }; |
| |
| &usdhc1 { |
| pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| pinctrl-0 = <&pinctrl_usdhc1>; |
| pinctrl-1 = <&pinctrl_usdhc1_100mhz>; |
| pinctrl-2 = <&pinctrl_usdhc1_200mhz>; |
| cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; |
| wp-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>; |
| keep-power-in-suspend; |
| enable-sdio-wakeup; |
| vmmc-supply = <®_sd1_vmmc>; |
| status = "okay"; |
| }; |
| |
| &usdhc2 { |
| pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| pinctrl-0 = <&pinctrl_usdhc2>; |
| pinctrl-1 = <&pinctrl_usdhc2_100mhz>; |
| pinctrl-2 = <&pinctrl_usdhc2_200mhz>; |
| vqmmc-supply = <®_sd2_vmmc>; |
| bus-width = <8>; |
| no-removable; |
| status = "okay"; |
| }; |
| |
| &usdhc3 { |
| pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| pinctrl-0 = <&pinctrl_usdhc3>; |
| pinctrl-1 = <&pinctrl_usdhc3_100mhz>; |
| pinctrl-2 = <&pinctrl_usdhc3_200mhz>; |
| cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>; |
| keep-power-in-suspend; |
| enable-sdio-wakeup; |
| vmmc-supply = <®_sd3_vmmc>; |
| status = "okay"; |
| }; |
| |
| &usbotg1 { |
| vbus-supply = <®_usb_otg1_vbus>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usbotg1>; |
| disable-over-current; |
| srp-disable; |
| hnp-disable; |
| adp-disable; |
| status = "okay"; |
| }; |
| |
| &usbotg2 { |
| vbus-supply = <®_usb_otg2_vbus>; |
| dr_mode = "host"; |
| disable-over-current; |
| status = "okay"; |
| }; |
| |
| &epdc { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_epdc0>; |
| V3P3-supply = <&V3P3_reg>; |
| VCOM-supply = <&VCOM_reg>; |
| DISPLAY-supply = <&DISPLAY_reg>; |
| status = "okay"; |
| }; |
| |
| &ssi2 { |
| status = "okay"; |
| }; |