| /dts-v1/; |
| |
| #include "tegra30.dtsi" |
| |
| / { |
| model = "Toradex Colibri T30"; |
| compatible = "toradex,colibri_t30", "nvidia,tegra30"; |
| |
| chosen { |
| stdout-path = &uarta; |
| }; |
| |
| aliases { |
| i2c0 = "/i2c@7000d000"; |
| i2c1 = "/i2c@7000c000"; |
| i2c2 = "/i2c@7000c700"; |
| mmc0 = "/sdhci@78000600"; |
| mmc1 = "/sdhci@78000200"; |
| spi0 = "/spi@7000d400"; |
| usb0 = "/usb@7d000000"; |
| usb1 = "/usb@7d004000"; /* on module only, for ASIX */ |
| usb2 = "/usb@7d008000"; |
| }; |
| |
| memory { |
| device_type = "memory"; |
| reg = <0x80000000 0x40000000>; |
| }; |
| |
| /* |
| * GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier |
| * board) |
| */ |
| i2c@7000c000 { |
| status = "okay"; |
| clock-frequency = <100000>; |
| }; |
| |
| /* GEN2_I2C: unused */ |
| |
| /* CAM_I2C: unused */ |
| |
| /* DDC_CLOCK/DATA on X3 pin 15/16 (e.g. display EDID) */ |
| i2c@7000c700 { |
| status = "okay"; |
| clock-frequency = <100000>; |
| }; |
| |
| /* |
| * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and |
| * touch screen controller |
| */ |
| i2c@7000d000 { |
| status = "okay"; |
| clock-frequency = <100000>; |
| }; |
| |
| /* SPI1: Colibri SSP */ |
| spi@7000d400 { |
| status = "okay"; |
| spi-max-frequency = <25000000>; |
| }; |
| |
| sdhci@78000200 { |
| status = "okay"; |
| bus-width = <4>; |
| cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; /* MMCD */ |
| }; |
| |
| sdhci@78000600 { |
| status = "okay"; |
| bus-width = <8>; |
| non-removable; |
| }; |
| |
| /* EHCI instance 0: USB1_DP/N -> USBC_P/N */ |
| usb@7d000000 { |
| status = "okay"; |
| dr_mode = "otg"; |
| }; |
| |
| /* EHCI instance 1: USB2_DP/N -> AX88772B */ |
| usb@7d004000 { |
| status = "okay"; |
| /* VBUS_LAN */ |
| nvidia,vbus-gpio = <&gpio TEGRA_GPIO(DD, 2) GPIO_ACTIVE_HIGH>; |
| }; |
| |
| /* EHCI instance 2: USB3_DP/N -> USBH_P/N */ |
| usb@7d008000 { |
| status = "okay"; |
| /* USBH_PEN */ |
| nvidia,vbus-gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>; |
| }; |
| |
| clocks { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| clk32k_in: clk@0 { |
| compatible = "fixed-clock"; |
| reg=<0>; |
| #clock-cells = <0>; |
| clock-frequency = <32768>; |
| }; |
| }; |
| }; |
| |
| &uarta { |
| status = "okay"; |
| }; |