| /* |
| * dts file for Xilinx ZynqMP zc1751-xm019-dc5 |
| * |
| * (C) Copyright 2015, Xilinx, Inc. |
| * |
| * Siva Durga Prasad <siva.durga.paladugu@xilinx.com> |
| * Michal Simek <michal.simek@xilinx.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| /dts-v1/; |
| |
| #include "zynqmp.dtsi" |
| #include "zynqmp-clk.dtsi" |
| / { |
| model = "ZynqMP zc1751-xm019-dc5 RevA"; |
| compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp"; |
| |
| aliases { |
| ethernet0 = &gem1; |
| gpio0 = &gpio; |
| i2c0 = &i2c0; |
| i2c1 = &i2c1; |
| mmc0 = &sdhci0; |
| serial0 = &uart0; |
| serial1 = &uart1; |
| }; |
| |
| chosen { |
| bootargs = "earlycon=cdns,mmio,0xff000000,115200n8"; |
| stdout-path = "serial0:115200n8"; |
| }; |
| |
| memory@0 { |
| device_type = "memory"; |
| reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; |
| }; |
| }; |
| |
| /* fpd_dma clk 667MHz, lpd_dma 500MHz */ |
| &fpd_dma_chan1 { |
| status = "okay"; |
| xlnx,include-sg; /* for testing purpose */ |
| xlnx,overfetch; /* for testing purpose */ |
| xlnx,ratectrl = <0>; /* for testing purpose */ |
| xlnx,src-issue = <31>; |
| }; |
| |
| &fpd_dma_chan2 { |
| status = "okay"; |
| xlnx,ratectrl = <100>; /* for testing purpose */ |
| xlnx,src-issue = <4>; /* for testing purpose */ |
| }; |
| |
| &fpd_dma_chan3 { |
| status = "okay"; |
| }; |
| |
| &fpd_dma_chan4 { |
| status = "okay"; |
| xlnx,include-sg; /* for testing purpose */ |
| }; |
| |
| &fpd_dma_chan5 { |
| status = "okay"; |
| }; |
| |
| &fpd_dma_chan6 { |
| status = "okay"; |
| xlnx,include-sg; /* for testing purpose */ |
| }; |
| |
| &fpd_dma_chan7 { |
| status = "okay"; |
| }; |
| |
| &fpd_dma_chan8 { |
| status = "okay"; |
| xlnx,include-sg; /* for testing purpose */ |
| }; |
| |
| &gem1 { |
| status = "okay"; |
| local-mac-address = [00 0a 35 00 02 90]; |
| phy-handle = <&phy0>; |
| phy-mode = "rgmii-id"; |
| phy0: phy@0 { |
| reg = <0>; |
| }; |
| }; |
| |
| &gpio { |
| status = "okay"; |
| }; |
| |
| /* FIXME: Add device */ |
| &i2c0 { |
| status = "okay"; |
| }; |
| |
| /* FIXME: Add device */ |
| &i2c1 { |
| status = "okay"; |
| }; |
| |
| &sdhci0 { |
| status = "okay"; |
| }; |
| |
| &uart0 { |
| status = "okay"; |
| }; |
| |
| &uart1 { |
| status = "okay"; |
| }; |
| |
| &watchdog0 { |
| status = "okay"; |
| }; |