blob: 3b86b9328fc6dd7062ed4112cf055bb32e20b4c2 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* Qualcomm SDM845 chip device tree source
*
* (C) Copyright 2021 Dzmitry Sankouski <dsankouski@gmail.com>
*
*/
/dts-v1/;
#include <dt-bindings/clock/qcom,gcc-sdm845.h>
#include "skeleton64.dtsi"
/ {
soc: soc {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
compatible = "simple-bus";
gcc: clock-controller@100000 {
compatible = "qcom,gcc-sdm845";
reg = <0x100000 0x1f0000>;
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
};
gpio_north: gpio_north@3900000 {
#gpio-cells = <2>;
compatible = "qcom,sdm845-pinctrl";
reg = <0x3900000 0x400000>;
gpio-count = <150>;
gpio-controller;
gpio-ranges = <&gpio_north 0 0 150>;
gpio-bank-name = "soc_north.";
};
tlmm_north: pinctrl_north@3900000 {
compatible = "qcom,sdm845-pinctrl";
reg = <0x3900000 0x400000>;
gpio-count = <150>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&tlmm_north 0 0 150>;
/* DEBUG UART */
qup_uart9: qup-uart9-default {
pins = "GPIO_4", "GPIO_5";
function = "qup9";
};
};
qupv3_id_1: geniqup@ac0000 {
compatible = "qcom,geni-se-qup";
reg = <0x00ac0000 0x6000>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
uart9: serial@a84000 {
compatible = "qcom,geni-debug-uart";
reg = <0xa84000 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_uart9>;
};
};
spmi@c440000 {
compatible = "qcom,spmi-pmic-arb";
reg = <0xc440000 0x1100>,
<0xc600000 0x2000000>,
<0xe600000 0x100000>;
reg-names = "cnfg", "core", "obsrvr";
#address-cells = <0x1>;
#size-cells = <0x1>;
qcom,revid@100 {
compatible = "qcom,qpnp-revid";
reg = <0x100 0x100>;
};
pmic0: pm8998@0 {
compatible = "qcom,spmi-pmic";
reg = <0x0 0x1>;
#address-cells = <0x1>;
#size-cells = <0x1>;
pm8998_pon: pm8998_pon@800 {
compatible = "qcom,pm8998-pwrkey";
reg = <0x800 0x100>;
#gpio-cells = <2>;
gpio-controller;
gpio-bank-name = "pm8998_key.";
};
pm8998_gpios: pm8998_gpios@c000 {
compatible = "qcom,pm8998-gpio";
reg = <0xc000 0x1a00>;
gpio-controller;
gpio-count = <21>;
#gpio-cells = <2>;
gpio-bank-name = "pm8998.";
};
};
pmic1: pm8998@1 {
compatible = "qcom,spmi-pmic";
reg = <0x1 0x0>;
#address-cells = <0x2>;
#size-cells = <0x0>;
};
};
};
};