blob: 1bd93145233e76a7475a7c7f5b14100ae64d90d4 [file] [log] [blame]
/*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/*
* Boot support
*/
#ifndef _CMD_BOOT_H
#define _CMD_BOOT_H
#if (CONFIG_COMMANDS & CFG_CMD_BDI)
#define CMD_TBL_BDINFO MK_CMD_TBL_ENTRY( \
"bdinfo", 2, 1, 1, do_bdinfo, \
"bdinfo - print Board Info structure\n", \
NULL \
),
int do_bdinfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
#else
#define CMD_TBL_BDINFO
#endif
#define CMD_TBL_GO MK_CMD_TBL_ENTRY( \
"go", 2, CFG_MAXARGS, 1, do_go, \
"go - start application at address 'addr'\n", \
"addr [arg ...]\n - start application at address 'addr'\n" \
" passing 'arg' as arguments\n" \
),
int do_go (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
#if (CONFIG_COMMANDS & CFG_CMD_LOADS)
#ifdef CFG_LOADS_BAUD_CHANGE
#define CMD_TBL_LOADS MK_CMD_TBL_ENTRY( \
"loads", 5, 3, 0, do_load_serial, \
"loads - load S-Record file over serial line\n", \
"[ off ] [ baud ]\n" \
" - load S-Record file over serial line" \
" with offset 'off' and baudrate 'baud'\n" \
),
#else /* ! CFG_LOADS_BAUD_CHANGE */
#define CMD_TBL_LOADS MK_CMD_TBL_ENTRY( \
"loads", 5, 2, 0, do_load_serial, \
"loads - load S-Record file over serial line\n", \
"[ off ]\n" \
" - load S-Record file over serial line with offset 'off'\n" \
),
#endif /* CFG_LOADS_BAUD_CHANGE */
int do_load_serial (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
/*
* SAVES always requires LOADS support, but not vice versa
*/
#if (CONFIG_COMMANDS & CFG_CMD_SAVES)
#ifdef CFG_LOADS_BAUD_CHANGE
#define CMD_TBL_SAVES MK_CMD_TBL_ENTRY( \
"saves", 5, 4, 0, do_save_serial, \
"saves - save S-Record file over serial line\n", \
"[ off ] [size] [ baud ]\n" \
" - save S-Record file over serial line" \
" with offset 'off', size 'size' and baudrate 'baud'\n" \
),
#else /* ! CFG_LOADS_BAUD_CHANGE */
#define CMD_TBL_SAVES MK_CMD_TBL_ENTRY( \
"saves", 5, 3, 0, do_save_serial, \
"saves - save S-Record file over serial line\n", \
"[ off ] [size]\n" \
" - save S-Record file over serial line with offset 'off' and size 'size'\n" \
),
#endif /* CFG_LOADS_BAUD_CHANGE */
int do_save_serial (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
#else /* ! CFG_CMD_SAVES */
#define CMD_TBL_SAVES
#endif /* CFG_CMD_SAVES */
#else /* ! CFG_CMD_LOADS */
#define CMD_TBL_LOADS
#define CMD_TBL_SAVES
#endif /* CFG_CMD_LOADS */
#if (CONFIG_COMMANDS & CFG_CMD_LOADB)
#define CMD_TBL_LOADB MK_CMD_TBL_ENTRY( \
"loadb", 5, 3, 0, do_load_serial_bin, \
"loadb - load binary file over serial line (kermit mode)\n", \
"[ off ] [ baud ]\n" \
" - load binary file over serial line" \
" with offset 'off' and baudrate 'baud'\n" \
),
int do_load_serial_bin (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
#else
#define CMD_TBL_LOADB
#endif /* CFG_CMD_LOADB */
#define CMD_TBL_RESET MK_CMD_TBL_ENTRY( \
"reset", 5, 1, 0, do_reset, \
"reset - Perform RESET of the CPU\n", \
NULL \
),
/* Implemented in $(CPU)/cpu.c */
int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
#if (CONFIG_COMMANDS & CFG_CMD_HWFLOW)
#define CMD_TBL_HWFLOW MK_CMD_TBL_ENTRY( \
"hwflow [on|off]", 2, 2, 0, do_hwflow, \
"hwflow - turn the harwdare flow control on/off\n", \
"\n - change RTS/CTS hardware flow control over serial line\n" \
),
int do_hwflow (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
#else
#define CMD_TBL_HWFLOW
#endif
#endif /* _CMD_BOOT_H */