| /* |
| * (C) Copyright 2003 |
| * Texas Instruments. |
| * Kshitij Gupta <kshitij@ti.com> |
| * Configuation settings for the TI OMAP Innovator board. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| /* |
| * If we are developing, we might want to start armboot from ram |
| * so we MUST NOT initialize critical regs like mem-timing ... |
| */ |
| #define CONFIG_INIT_CRITICAL |
| |
| /* |
| * High Level Configuration Options |
| * (easy to change) |
| */ |
| #define CONFIG_ARM926EJS 1 /* This is an arm926ejs CPU core */ |
| #define CONFIG_OMAP 1 /* in a TI OMAP core */ |
| #define CONFIG_OMAP1610 1 /* which is in a 1610 */ |
| #define CONFIG_INNOVATOROMAP1610 1 /* a Innovator Board */ |
| #define CONFIG_MACH_OMAP_INNOVATOR /* Select board mach-type */ |
| |
| /* input clock of PLL */ |
| /* the OMAP1610 Innovator has 12MHz input clock */ |
| #define CONFIG_SYS_CLK_FREQ 12000000 |
| |
| #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ |
| |
| #define CONFIG_MISC_INIT_R |
| |
| #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ |
| #define CONFIG_SETUP_MEMORY_TAGS 1 |
| |
| /* |
| * Size of malloc() pool |
| */ |
| #define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) |
| #define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ |
| |
| /* |
| * Hardware drivers |
| */ |
| /* |
| */ |
| #define CONFIG_DRIVER_LAN91C96 |
| #define CONFIG_LAN91C96_BASE 0x04000300 |
| #define CONFIG_LAN91C96_EXT_PHY |
| |
| /* |
| * NS16550 Configuration |
| */ |
| #define CFG_NS16550 |
| #define CFG_NS16550_SERIAL |
| #define CFG_NS16550_REG_SIZE (-4) |
| #define CFG_NS16550_CLK (48000000) /* can be 12M/32Khz or 48Mhz */ |
| #define CFG_NS16550_COM1 0xfffb0000 /* uart1, bluetooth uart on helen */ |
| |
| /* |
| * select serial console configuration |
| */ |
| #define CONFIG_SERIAL1 1 /* we use SERIAL 1 on OMAP1610 Innovator */ |
| |
| /* allow to overwrite serial and ethaddr */ |
| #define CONFIG_ENV_OVERWRITE |
| #define CONFIG_CONS_INDEX 1 |
| #define CONFIG_BAUDRATE 115200 |
| #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } |
| |
| #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP) |
| #define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT |
| |
| /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ |
| #include <cmd_confdefs.h> |
| #include <configs/omap1510.h> |
| |
| #define CONFIG_BOOTDELAY 3 |
| #define CONFIG_BOOTARGS "mem=32M console=ttyS0,115200n8 noinitrd \ |
| root=/dev/nfs rw nfsroot=157.87.82.48:\ |
| /home/a0875451/mwd/myfs/target ip=dhcp" |
| #define CONFIG_NETMASK 255.255.254.0 /* talk on MY local net */ |
| #define CONFIG_IPADDR 156.117.97.156 /* static IP I currently own */ |
| #define CONFIG_SERVERIP 156.117.97.139 /* current IP of my dev pc */ |
| #define CONFIG_BOOTFILE "uImage" /* file to load */ |
| |
| #if (CONFIG_COMMANDS & CFG_CMD_KGDB) |
| #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ |
| #define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ |
| #endif |
| |
| /* |
| * Miscellaneous configurable options |
| */ |
| #define CFG_LONGHELP /* undef to save memory */ |
| #define CFG_PROMPT "OMAP1610 Innovator # " /* Monitor Command Prompt */ |
| #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ |
| /* Print Buffer Size */ |
| #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) |
| #define CFG_MAXARGS 16 /* max number of command args */ |
| #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ |
| |
| #define CFG_MEMTEST_START 0x10000000 /* memtest works on */ |
| #define CFG_MEMTEST_END 0x12000000 /* 32 MB in DRAM */ |
| |
| #undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ |
| |
| #define CFG_LOAD_ADDR 0x10000000 /* default load address */ |
| |
| /* The 1610 has 6 timers, they can be driven by the RefClk (12Mhz) or by |
| * DPLL1. This time is further subdivided by a local divisor. |
| */ |
| #define CFG_TIMERBASE 0xFFFEC500 /* use timer 1 */ |
| #define CFG_PVT 7 /* 2^(pvt+1), divide by 256 */ |
| #define CFG_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT)) |
| |
| /*----------------------------------------------------------------------- |
| * Stack sizes |
| * |
| * The stack sizes are set up in start.S using the settings below |
| */ |
| #define CONFIG_STACKSIZE (128*1024) /* regular stack */ |
| #ifdef CONFIG_USE_IRQ |
| #define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ |
| #define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ |
| #endif |
| |
| /*----------------------------------------------------------------------- |
| * Physical Memory Map |
| */ |
| #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ |
| #define PHYS_SDRAM_1 0x10000000 /* SDRAM Bank #1 */ |
| #define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ |
| |
| #define PHYS_FLASH_1_BM1 0x00000000 /* Flash Bank #1 if booting from flash */ |
| #define PHYS_FLASH_1_BM0 0x0C000000 /* Flash Bank #1 if booting from RAM */ |
| |
| #ifdef CONFIG_CS_AUTOBOOT /* Determine CS assignment in runtime */ |
| |
| #ifndef __ASSEMBLY__ |
| extern unsigned long omap_flash_base; /* set in flash__init */ |
| #endif |
| #define CFG_FLASH_BASE omap_flash_base |
| |
| #elif defined(CONFIG_CS0_BOOT) |
| |
| #define CFG_FLASH_BASE PHYS_FLASH_1_BM0 |
| |
| #else |
| |
| #define CFG_FLASH_BASE PHYS_FLASH_1_BM1 |
| |
| #endif |
| |
| /*----------------------------------------------------------------------- |
| * FLASH and environment organization |
| */ |
| #define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ |
| #define PHYS_FLASH_SIZE 0x02000000 /* 32MB */ |
| #define CFG_MAX_FLASH_SECT (259) /* max number of sectors on one chip */ |
| /* addr of environment */ |
| #define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x020000) |
| |
| /* timeout values are in ticks */ |
| #define CFG_FLASH_ERASE_TOUT (20*CFG_HZ) /* Timeout for Flash Erase */ |
| #define CFG_FLASH_WRITE_TOUT (20*CFG_HZ) /* Timeout for Flash Write */ |
| |
| #define CFG_ENV_IS_IN_FLASH 1 |
| #define CFG_ENV_SIZE 0x20000 /* Total Size of Environment Sector */ |
| #define CFG_ENV_OFFSET 0x20000 /* environment starts here */ |
| |
| #endif /* __CONFIG_H */ |