blob: d2a352ecbe430f1d3e3bfae3ae05bba5f568417c [file] [log] [blame]
/*
* Copyright (C) 2016 Google, Inc
* Written by Simon Glass <sjg@chromium.org>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <errno.h>
#include <image.h>
#include <libfdt.h>
#include <spl.h>
/**
* spl_fit_get_image_node(): By using the matching configuration subnode,
* retrieve the name of an image, specified by a property name and an index
* into that.
* @fit: Pointer to the FDT blob.
* @images: Offset of the /images subnode.
* @type: Name of the property within the configuration subnode.
* @index: Index into the list of strings in this property.
*
* Return: the node offset of the respective image node or a negative
* error number.
*/
static int spl_fit_get_image_node(const void *fit, int images,
const char *type, int index)
{
const char *name, *str;
int node, conf_node;
int len, i;
conf_node = fit_find_config_node(fit);
if (conf_node < 0) {
#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
printf("No matching DT out of these options:\n");
for (node = fdt_first_subnode(fit, conf_node);
node >= 0;
node = fdt_next_subnode(fit, node)) {
name = fdt_getprop(fit, node, "description", &len);
printf(" %s\n", name);
}
#endif
return conf_node;
}
name = fdt_getprop(fit, conf_node, type, &len);
if (!name) {
debug("cannot find property '%s': %d\n", type, len);
return -EINVAL;
}
str = name;
for (i = 0; i < index; i++) {
str = strchr(str, '\0') + 1;
if (!str || (str - name >= len)) {
debug("no string for index %d\n", index);
return -E2BIG;
}
}
debug("%s: '%s'\n", type, str);
node = fdt_subnode_offset(fit, images, str);
if (node < 0) {
debug("cannot find image node '%s': %d\n", str, node);
return -EINVAL;
}
return node;
}
static int get_aligned_image_offset(struct spl_load_info *info, int offset)
{
/*
* If it is a FS read, get the first address before offset which is
* aligned to ARCH_DMA_MINALIGN. If it is raw read return the
* block number to which offset belongs.
*/
if (info->filename)
return offset & ~(ARCH_DMA_MINALIGN - 1);
return offset / info->bl_len;
}
static int get_aligned_image_overhead(struct spl_load_info *info, int offset)
{
/*
* If it is a FS read, get the difference between the offset and
* the first address before offset which is aligned to
* ARCH_DMA_MINALIGN. If it is raw read return the offset within the
* block.
*/
if (info->filename)
return offset & (ARCH_DMA_MINALIGN - 1);
return offset % info->bl_len;
}
static int get_aligned_image_size(struct spl_load_info *info, int data_size,
int offset)
{
data_size = data_size + get_aligned_image_overhead(info, offset);
if (info->filename)
return data_size;
return (data_size + info->bl_len - 1) / info->bl_len;
}
/**
* spl_load_fit_image(): load the image described in a certain FIT node
* @info: points to information about the device to load data from
* @sector: the start sector of the FIT image on the device
* @fit: points to the flattened device tree blob describing the FIT
* image
* @base_offset: the beginning of the data area containing the actual
* image data, relative to the beginning of the FIT
* @node: offset of the DT node describing the image to load (relative
* to @fit)
* @image_info: will be filled with information about the loaded image
* If the FIT node does not contain a "load" (address) property,
* the image gets loaded to the address pointed to by the
* load_addr member in this struct.
*
* Return: 0 on success or a negative error number.
*/
static int spl_load_fit_image(struct spl_load_info *info, ulong sector,
void *fit, ulong base_offset, int node,
struct spl_image_info *image_info)
{
ulong offset;
size_t length;
ulong load_addr, load_ptr;
void *src;
ulong overhead;
int nr_sectors;
int align_len = ARCH_DMA_MINALIGN - 1;
offset = fdt_getprop_u32(fit, node, "data-offset");
if (offset == FDT_ERROR)
return -ENOENT;
offset += base_offset;
length = fdt_getprop_u32(fit, node, "data-size");
if (length == FDT_ERROR)
return -ENOENT;
load_addr = fdt_getprop_u32(fit, node, "load");
if (load_addr == FDT_ERROR && image_info)
load_addr = image_info->load_addr;
load_ptr = (load_addr + align_len) & ~align_len;
overhead = get_aligned_image_overhead(info, offset);
nr_sectors = get_aligned_image_size(info, length, offset);
if (info->read(info, sector + get_aligned_image_offset(info, offset),
nr_sectors, (void*)load_ptr) != nr_sectors)
return -EIO;
debug("image: dst=%lx, offset=%lx, size=%lx\n", load_ptr, offset,
(unsigned long)length);
src = (void *)load_ptr + overhead;
#ifdef CONFIG_SPL_FIT_IMAGE_POST_PROCESS
board_fit_image_post_process(&src, &length);
#endif
memcpy((void*)load_addr, src, length);
if (image_info) {
image_info->load_addr = load_addr;
image_info->size = length;
image_info->entry_point = fdt_getprop_u32(fit, node, "entry");
}
return 0;
}
int spl_load_simple_fit(struct spl_image_info *spl_image,
struct spl_load_info *info, ulong sector, void *fit)
{
int sectors;
ulong size;
unsigned long count;
struct spl_image_info image_info;
int node, images, ret;
int base_offset, align_len = ARCH_DMA_MINALIGN - 1;
int index = 0;
/*
* Figure out where the external images start. This is the base for the
* data-offset properties in each image.
*/
size = fdt_totalsize(fit);
size = (size + 3) & ~3;
base_offset = (size + 3) & ~3;
/*
* So far we only have one block of data from the FIT. Read the entire
* thing, including that first block, placing it so it finishes before
* where we will load the image.
*
* Note that we will load the image such that its first byte will be
* at the load address. Since that byte may be part-way through a
* block, we may load the image up to one block before the load
* address. So take account of that here by subtracting an addition
* block length from the FIT start position.
*
* In fact the FIT has its own load address, but we assume it cannot
* be before CONFIG_SYS_TEXT_BASE.
*/
fit = (void *)((CONFIG_SYS_TEXT_BASE - size - info->bl_len -
align_len) & ~align_len);
sectors = get_aligned_image_size(info, size, 0);
count = info->read(info, sector, sectors, fit);
debug("fit read sector %lx, sectors=%d, dst=%p, count=%lu\n",
sector, sectors, fit, count);
if (count == 0)
return -EIO;
/* find the node holding the images information */
images = fdt_path_offset(fit, FIT_IMAGES_PATH);
if (images < 0) {
debug("%s: Cannot find /images node: %d\n", __func__, images);
return -1;
}
/* find the U-Boot image */
node = spl_fit_get_image_node(fit, images, "firmware", 0);
if (node < 0) {
debug("could not find firmware image, trying loadables...\n");
node = spl_fit_get_image_node(fit, images, "loadables", 0);
/*
* If we pick the U-Boot image from "loadables", start at
* the second image when later loading additional images.
*/
index = 1;
}
if (node < 0) {
debug("%s: Cannot find u-boot image node: %d\n",
__func__, node);
return -1;
}
/* Load the image and set up the spl_image structure */
ret = spl_load_fit_image(info, sector, fit, base_offset, node,
spl_image);
if (ret)
return ret;
spl_image->os = IH_OS_U_BOOT;
/* Figure out which device tree the board wants to use */
node = spl_fit_get_image_node(fit, images, FIT_FDT_PROP, 0);
if (node < 0) {
debug("%s: cannot find FDT node\n", __func__);
return node;
}
/*
* Read the device tree and place it after the image.
* Align the destination address to ARCH_DMA_MINALIGN.
*/
image_info.load_addr = spl_image->load_addr + spl_image->size;
ret = spl_load_fit_image(info, sector, fit, base_offset, node,
&image_info);
if (ret < 0)
return ret;
/* Now check if there are more images for us to load */
for (; ; index++) {
node = spl_fit_get_image_node(fit, images, "loadables", index);
if (node < 0)
break;
ret = spl_load_fit_image(info, sector, fit, base_offset, node,
&image_info);
if (ret < 0)
continue;
/*
* If the "firmware" image did not provide an entry point,
* use the first valid entry point from the loadables.
*/
if (spl_image->entry_point == FDT_ERROR &&
image_info.entry_point != FDT_ERROR)
spl_image->entry_point = image_info.entry_point;
}
/*
* If a platform does not provide CONFIG_SYS_UBOOT_START, U-Boot's
* Makefile will set it to 0 and it will end up as the entry point
* here. What it actually means is: use the load address.
*/
if (spl_image->entry_point == FDT_ERROR || spl_image->entry_point == 0)
spl_image->entry_point = spl_image->load_addr;
return 0;
}