| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * TI PHY drivers |
| * |
| */ |
| |
| #include <common.h> |
| #include <phy.h> |
| #include <linux/compat.h> |
| #include <malloc.h> |
| |
| #include <dm.h> |
| #include <dt-bindings/net/ti-dp83869.h> |
| |
| /* TI DP83869 */ |
| #define DP83869_DEVADDR 0x1f |
| |
| #define MII_DP83869_PHYCTRL 0x10 |
| #define MII_DP83869_MICR 0x12 |
| #define MII_DP83869_CFG2 0x14 |
| #define MII_DP83869_BISCR 0x16 |
| #define DP83869_CTRL 0x1f |
| #define DP83869_CFG4 0x1e |
| |
| /* Extended Registers */ |
| #define DP83869_GEN_CFG3 0x0031 |
| #define DP83869_RGMIICTL 0x0032 |
| #define DP83869_STRAP_STS1 0x006E |
| #define DP83869_RGMIIDCTL 0x0086 |
| #define DP83869_IO_MUX_CFG 0x0170 |
| #define DP83869_OP_MODE 0x01df |
| #define DP83869_FX_CTRL 0x0c00 |
| |
| #define DP83869_SW_RESET BIT(15) |
| #define DP83869_SW_RESTART BIT(14) |
| |
| /* MICR Interrupt bits */ |
| #define MII_DP83869_MICR_AN_ERR_INT_EN BIT(15) |
| #define MII_DP83869_MICR_SPEED_CHNG_INT_EN BIT(14) |
| #define MII_DP83869_MICR_DUP_MODE_CHNG_INT_EN BIT(13) |
| #define MII_DP83869_MICR_PAGE_RXD_INT_EN BIT(12) |
| #define MII_DP83869_MICR_AUTONEG_COMP_INT_EN BIT(11) |
| #define MII_DP83869_MICR_LINK_STS_CHNG_INT_EN BIT(10) |
| #define MII_DP83869_MICR_FALSE_CARRIER_INT_EN BIT(8) |
| #define MII_DP83869_MICR_SLEEP_MODE_CHNG_INT_EN BIT(4) |
| #define MII_DP83869_MICR_WOL_INT_EN BIT(3) |
| #define MII_DP83869_MICR_XGMII_ERR_INT_EN BIT(2) |
| #define MII_DP83869_MICR_POL_CHNG_INT_EN BIT(1) |
| #define MII_DP83869_MICR_JABBER_INT_EN BIT(0) |
| |
| #define MII_DP83869_BMCR_DEFAULT (BMCR_ANENABLE | \ |
| BMCR_FULLDPLX | \ |
| BMCR_SPEED1000) |
| |
| /* This is the same bit mask as the BMCR so re-use the BMCR default */ |
| #define DP83869_FX_CTRL_DEFAULT MII_DP83869_BMCR_DEFAULT |
| |
| /* CFG1 bits */ |
| #define DP83869_CFG1_DEFAULT (ADVERTISE_1000HALF | \ |
| ADVERTISE_1000FULL | \ |
| CTL1000_AS_MASTER) |
| |
| /* RGMIICTL bits */ |
| #define DP83869_RGMII_TX_CLK_DELAY_EN BIT(1) |
| #define DP83869_RGMII_RX_CLK_DELAY_EN BIT(0) |
| |
| /* STRAP_STS1 bits */ |
| #define DP83869_STRAP_OP_MODE_MASK GENMASK(2, 0) |
| #define DP83869_STRAP_STS1_RESERVED BIT(11) |
| #define DP83869_STRAP_MIRROR_ENABLED BIT(12) |
| |
| /* PHY CTRL bits */ |
| #define DP83869_PHYCR_RX_FIFO_DEPTH_SHIFT 12 |
| #define DP83869_PHYCR_RX_FIFO_DEPTH_MASK GENMASK(13, 12) |
| #define DP83869_PHYCR_TX_FIFO_DEPTH_SHIFT 14 |
| #define DP83869_PHYCR_TX_FIFO_DEPTH_MASK GENMASK(15, 14) |
| #define DP83869_PHYCR_RESERVED_MASK BIT(11) |
| #define DP83869_PHYCR_MDI_CROSSOVER_SHIFT 5 |
| #define DP83869_PHYCR_MDI_CROSSOVER_MDIX 2 |
| #define DP83869_PHY_CTRL_DEFAULT 0x48 |
| |
| /* RGMIIDCTL bits */ |
| #define DP83869_RGMII_TX_CLK_DELAY_SHIFT 4 |
| #define DP83869_CLK_DELAY_STEP 250 |
| #define DP83869_CLK_DELAY_MIN 250 |
| #define DP83869_CLK_DELAY_MAX 4000 |
| #define DP83869_CLK_DELAY_DEFAULT 2000 |
| |
| /* CFG2 bits */ |
| #define MII_DP83869_CFG2_SPEEDOPT_10EN 0x0040 |
| #define MII_DP83869_CFG2_SGMII_AUTONEGEN 0x0080 |
| #define MII_DP83869_CFG2_SPEEDOPT_ENH 0x0100 |
| #define MII_DP83869_CFG2_SPEEDOPT_CNT 0x0800 |
| #define MII_DP83869_CFG2_SPEEDOPT_INTLOW 0x2000 |
| #define MII_DP83869_CFG2_MASK 0x003F |
| |
| /* User setting - can be taken from DTS */ |
| #define DEFAULT_FIFO_DEPTH DP83869_PHYCR_FIFO_DEPTH_4_B_NIB |
| |
| /* IO_MUX_CFG bits */ |
| #define DP83869_IO_MUX_CFG_IO_IMPEDANCE_CTRL 0x1f |
| |
| #define DP83869_IO_MUX_CFG_IO_IMPEDANCE_MAX 0x0 |
| #define DP83869_IO_MUX_CFG_IO_IMPEDANCE_MIN 0x1f |
| #define DP83869_IO_MUX_CFG_CLK_O_DISABLE BIT(6) |
| #define DP83869_IO_MUX_CFG_CLK_O_SEL_SHIFT 8 |
| #define DP83869_IO_MUX_CFG_CLK_O_SEL_MASK \ |
| GENMASK(0x1f, DP83869_IO_MUX_CFG_CLK_O_SEL_SHIFT) |
| |
| /* CFG3 bits */ |
| #define DP83869_CFG3_PORT_MIRROR_EN BIT(0) |
| |
| /* OP MODE bits */ |
| #define DP83869_OP_MODE_MII BIT(5) |
| #define DP83869_SGMII_RGMII_BRIDGE BIT(6) |
| |
| enum { |
| DP83869_PORT_MIRRORING_KEEP, |
| DP83869_PORT_MIRRORING_EN, |
| DP83869_PORT_MIRRORING_DIS, |
| }; |
| |
| struct dp83869_private { |
| int tx_fifo_depth; |
| int rx_fifo_depth; |
| s32 rx_int_delay; |
| s32 tx_int_delay; |
| int io_impedance; |
| int port_mirroring; |
| bool set_clk_output; |
| int clk_output_sel; |
| int mode; |
| }; |
| |
| static int dp83869_readext(struct phy_device *phydev, int addr, int devad, int reg) |
| { |
| return phy_read_mmd(phydev, devad, reg); |
| } |
| |
| static int dp83869_writeext(struct phy_device *phydev, int addr, int devad, int reg, u16 val) |
| { |
| return phy_write_mmd(phydev, devad, reg, val); |
| } |
| |
| static int dp83869_config_port_mirroring(struct phy_device *phydev) |
| { |
| struct dp83869_private *dp83869 = |
| (struct dp83869_private *)phydev->priv; |
| u16 val; |
| |
| val = phy_read_mmd(phydev, DP83869_DEVADDR, DP83869_CFG4); |
| |
| if (dp83869->port_mirroring == DP83869_PORT_MIRRORING_EN) |
| val |= DP83869_CFG3_PORT_MIRROR_EN; |
| else |
| val &= ~DP83869_CFG3_PORT_MIRROR_EN; |
| |
| phy_write_mmd(phydev, DP83869_DEVADDR, DP83869_CFG4, val); |
| |
| return 0; |
| } |
| |
| static int dp83869_set_strapped_mode(struct phy_device *phydev) |
| { |
| struct dp83869_private *dp83869 = phydev->priv; |
| int val; |
| |
| val = phy_read_mmd(phydev, DP83869_DEVADDR, DP83869_STRAP_STS1); |
| if (val < 0) |
| return val; |
| |
| dp83869->mode = val & DP83869_STRAP_OP_MODE_MASK; |
| |
| return 0; |
| } |
| |
| /** |
| * dp83869_data_init - Convenience function for setting PHY specific data |
| * |
| * @phydev: the phy_device struct |
| */ |
| static int dp83869_of_init(struct phy_device *phydev) |
| { |
| struct dp83869_private * const dp83869 = phydev->priv; |
| int ret; |
| ofnode node; |
| |
| node = phy_get_ofnode(phydev); |
| if (!ofnode_valid(node)) |
| return -EINVAL; |
| |
| dp83869->io_impedance = -EINVAL; |
| |
| /* Optional configuration, set to default if required */ |
| dp83869->clk_output_sel = ofnode_read_u32_default(node, "ti,clk-output-sel", |
| DP83869_CLK_O_SEL_CHN_A_RCLK); |
| |
| if (dp83869->clk_output_sel > DP83869_CLK_O_SEL_REF_CLK && |
| dp83869->clk_output_sel != DP83869_CLK_O_SEL_OFF) |
| dp83869->clk_output_sel = DP83869_CLK_O_SEL_REF_CLK; |
| |
| /* If operation mode is not set use setting from straps */ |
| ret = ofnode_read_s32(node, "ti,op-mode", &dp83869->mode); |
| if (ret == 0) { |
| if (dp83869->mode < DP83869_RGMII_COPPER_ETHERNET || |
| dp83869->mode > DP83869_SGMII_COPPER_ETHERNET) |
| return -EINVAL; |
| } else { |
| ret = dp83869_set_strapped_mode(phydev); |
| if (ret) |
| return ret; |
| } |
| |
| if (ofnode_read_bool(node, "ti,max-output-impedance")) |
| dp83869->io_impedance = DP83869_IO_MUX_CFG_IO_IMPEDANCE_MAX; |
| else if (ofnode_read_bool(node, "ti,min-output-impedance")) |
| dp83869->io_impedance = DP83869_IO_MUX_CFG_IO_IMPEDANCE_MIN; |
| |
| if (ofnode_read_bool(node, "enet-phy-lane-swap")) { |
| dp83869->port_mirroring = DP83869_PORT_MIRRORING_EN; |
| } else { |
| ret = phy_read_mmd(phydev, DP83869_DEVADDR, DP83869_STRAP_STS1); |
| |
| if (ret < 0) |
| return ret; |
| |
| if (ret & DP83869_STRAP_MIRROR_ENABLED) |
| dp83869->port_mirroring = DP83869_PORT_MIRRORING_EN; |
| else |
| dp83869->port_mirroring = DP83869_PORT_MIRRORING_DIS; |
| } |
| |
| dp83869->rx_fifo_depth = ofnode_read_s32_default(node, "rx-fifo-depth", |
| DP83869_PHYCR_FIFO_DEPTH_4_B_NIB); |
| |
| dp83869->tx_fifo_depth = ofnode_read_s32_default(node, "tx-fifo-depth", |
| DP83869_PHYCR_FIFO_DEPTH_4_B_NIB); |
| |
| /* Internal clock delay values can be configured in steps of |
| * 250ps (0.25ns). The register field for clock delay is 4-bits wide, |
| * the values range from 0b0000 for 0.25ns to 0b1111 for 4ns. |
| */ |
| |
| /* RX delay *must* be specified if internal delay of RX is used. */ |
| if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID || |
| phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) { |
| dp83869->rx_int_delay = ofnode_read_u32_default(node, |
| "rx-internal-delay-ps", DP83869_CLK_DELAY_DEFAULT); |
| if (dp83869->rx_int_delay > DP83869_CLK_DELAY_MAX || |
| dp83869->rx_int_delay < DP83869_CLK_DELAY_MIN || |
| dp83869->rx_int_delay % DP83869_CLK_DELAY_STEP) { |
| dp83869->rx_int_delay = DP83869_CLK_DELAY_DEFAULT; |
| pr_warn("rx-internal-delay-ps not set/invalid, default" |
| " to %ups\n", DP83869_CLK_DELAY_DEFAULT); |
| } |
| |
| dp83869->rx_int_delay = |
| (dp83869->rx_int_delay - DP83869_CLK_DELAY_STEP) |
| / DP83869_CLK_DELAY_STEP; |
| } |
| |
| /* TX delay *must* be specified if internal delay of TX is used. */ |
| if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID || |
| phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) { |
| dp83869->tx_int_delay = ofnode_read_u32_default(node, |
| "tx-internal-delay-ps", DP83869_CLK_DELAY_DEFAULT); |
| if (dp83869->tx_int_delay > DP83869_CLK_DELAY_MAX || |
| dp83869->tx_int_delay < DP83869_CLK_DELAY_MIN || |
| dp83869->tx_int_delay % DP83869_CLK_DELAY_STEP) { |
| dp83869->tx_int_delay = DP83869_CLK_DELAY_DEFAULT; |
| pr_warn("tx-internal-delay-ps not set/invalid, default" |
| " to %ups\n", DP83869_CLK_DELAY_DEFAULT); |
| } |
| |
| dp83869->tx_int_delay = |
| (dp83869->tx_int_delay - DP83869_CLK_DELAY_STEP) |
| / DP83869_CLK_DELAY_STEP; |
| } |
| |
| return 0; |
| } |
| |
| static int dp83869_configure_rgmii(struct phy_device *phydev, |
| struct dp83869_private *dp83869) |
| { |
| int ret = 0, val; |
| |
| if (phy_interface_is_rgmii(phydev)) { |
| val = phy_read(phydev, MDIO_DEVAD_NONE, MII_DP83869_PHYCTRL); |
| if (val < 0) |
| return val; |
| |
| val &= ~(DP83869_PHYCR_TX_FIFO_DEPTH_MASK | DP83869_PHYCR_RX_FIFO_DEPTH_MASK); |
| val |= (dp83869->tx_fifo_depth << DP83869_PHYCR_TX_FIFO_DEPTH_SHIFT); |
| val |= (dp83869->rx_fifo_depth << DP83869_PHYCR_RX_FIFO_DEPTH_SHIFT); |
| |
| ret = phy_write(phydev, MDIO_DEVAD_NONE, MII_DP83869_PHYCTRL, val); |
| if (ret) |
| return ret; |
| } |
| |
| if (dp83869->io_impedance >= 0) { |
| val = phy_read_mmd(phydev, DP83869_DEVADDR, DP83869_IO_MUX_CFG); |
| |
| val &= ~DP83869_IO_MUX_CFG_IO_IMPEDANCE_CTRL; |
| val |= dp83869->io_impedance & DP83869_IO_MUX_CFG_IO_IMPEDANCE_CTRL; |
| |
| ret = phy_write_mmd(phydev, DP83869_DEVADDR, DP83869_IO_MUX_CFG, val); |
| |
| if (ret) |
| return ret; |
| } |
| |
| return ret; |
| } |
| |
| static int dp83869_configure_mode(struct phy_device *phydev, |
| struct dp83869_private *dp83869) |
| { |
| int phy_ctrl_val; |
| int ret, val; |
| |
| if (dp83869->mode < DP83869_RGMII_COPPER_ETHERNET || |
| dp83869->mode > DP83869_SGMII_COPPER_ETHERNET) |
| return -EINVAL; |
| |
| /* Below init sequence for each operational mode is defined in |
| * section 9.4.8 of the datasheet. |
| */ |
| ret = phy_write_mmd(phydev, DP83869_DEVADDR, DP83869_OP_MODE, |
| dp83869->mode); |
| if (ret) |
| return ret; |
| |
| ret = phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, MII_DP83869_BMCR_DEFAULT); |
| if (ret) |
| return ret; |
| |
| phy_ctrl_val = (dp83869->rx_fifo_depth << DP83869_PHYCR_RX_FIFO_DEPTH_SHIFT | |
| dp83869->tx_fifo_depth << DP83869_PHYCR_TX_FIFO_DEPTH_SHIFT | |
| DP83869_PHY_CTRL_DEFAULT); |
| |
| switch (dp83869->mode) { |
| case DP83869_RGMII_COPPER_ETHERNET: |
| ret = phy_write(phydev, MDIO_DEVAD_NONE, MII_DP83869_PHYCTRL, |
| phy_ctrl_val); |
| if (ret) |
| return ret; |
| |
| ret = phy_write(phydev, MDIO_DEVAD_NONE, MII_CTRL1000, DP83869_CFG1_DEFAULT); |
| if (ret) |
| return ret; |
| |
| ret = dp83869_configure_rgmii(phydev, dp83869); |
| if (ret) |
| return ret; |
| break; |
| case DP83869_RGMII_SGMII_BRIDGE: |
| val = phy_read_mmd(phydev, DP83869_DEVADDR, DP83869_OP_MODE); |
| |
| val |= DP83869_SGMII_RGMII_BRIDGE; |
| |
| ret = phy_write_mmd(phydev, DP83869_DEVADDR, DP83869_OP_MODE, val); |
| |
| if (ret) |
| return ret; |
| |
| ret = phy_write_mmd(phydev, DP83869_DEVADDR, |
| DP83869_FX_CTRL, DP83869_FX_CTRL_DEFAULT); |
| if (ret) |
| return ret; |
| |
| break; |
| case DP83869_1000M_MEDIA_CONVERT: |
| ret = phy_write(phydev, MDIO_DEVAD_NONE, MII_DP83869_PHYCTRL, |
| phy_ctrl_val); |
| if (ret) |
| return ret; |
| |
| ret = phy_write_mmd(phydev, DP83869_DEVADDR, |
| DP83869_FX_CTRL, DP83869_FX_CTRL_DEFAULT); |
| if (ret) |
| return ret; |
| break; |
| case DP83869_100M_MEDIA_CONVERT: |
| ret = phy_write(phydev, MDIO_DEVAD_NONE, MII_DP83869_PHYCTRL, |
| phy_ctrl_val); |
| if (ret) |
| return ret; |
| break; |
| case DP83869_SGMII_COPPER_ETHERNET: |
| ret = phy_write(phydev, MDIO_DEVAD_NONE, MII_DP83869_PHYCTRL, |
| phy_ctrl_val); |
| if (ret) |
| return ret; |
| |
| ret = phy_write(phydev, MDIO_DEVAD_NONE, MII_CTRL1000, DP83869_CFG1_DEFAULT); |
| if (ret) |
| return ret; |
| |
| ret = phy_write_mmd(phydev, DP83869_DEVADDR, |
| DP83869_FX_CTRL, DP83869_FX_CTRL_DEFAULT); |
| if (ret) |
| return ret; |
| |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| static int dp83869_config(struct phy_device *phydev) |
| { |
| struct dp83869_private *dp83869; |
| unsigned int val; |
| int ret; |
| |
| dp83869 = (struct dp83869_private *)phydev->priv; |
| |
| ret = dp83869_of_init(phydev); |
| if (ret) |
| return ret; |
| |
| ret = dp83869_configure_mode(phydev, dp83869); |
| if (ret) |
| return ret; |
| |
| if (dp83869->port_mirroring != DP83869_PORT_MIRRORING_KEEP) |
| dp83869_config_port_mirroring(phydev); |
| |
| /* Clock output selection if muxing property is set */ |
| if (dp83869->clk_output_sel != DP83869_CLK_O_SEL_REF_CLK) { |
| val = phy_read_mmd(phydev, DP83869_DEVADDR, DP83869_IO_MUX_CFG); |
| |
| val &= ~DP83869_IO_MUX_CFG_CLK_O_SEL_MASK; |
| val |= dp83869->clk_output_sel << DP83869_IO_MUX_CFG_CLK_O_SEL_SHIFT; |
| |
| ret = phy_write_mmd(phydev, DP83869_DEVADDR, DP83869_IO_MUX_CFG, val); |
| |
| if (ret) |
| return ret; |
| } |
| |
| if (phy_interface_is_rgmii(phydev)) { |
| ret = phy_write_mmd(phydev, DP83869_DEVADDR, DP83869_RGMIIDCTL, |
| dp83869->rx_int_delay | |
| dp83869->tx_int_delay << DP83869_RGMII_TX_CLK_DELAY_SHIFT); |
| if (ret) |
| return ret; |
| |
| val = phy_read_mmd(phydev, DP83869_DEVADDR, DP83869_RGMIICTL); |
| val |= (DP83869_RGMII_TX_CLK_DELAY_EN | |
| DP83869_RGMII_RX_CLK_DELAY_EN); |
| |
| if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) |
| val &= ~(DP83869_RGMII_TX_CLK_DELAY_EN | |
| DP83869_RGMII_RX_CLK_DELAY_EN); |
| |
| if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) |
| val &= ~DP83869_RGMII_TX_CLK_DELAY_EN; |
| |
| if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) |
| val &= ~DP83869_RGMII_RX_CLK_DELAY_EN; |
| |
| ret = phy_write_mmd(phydev, DP83869_DEVADDR, DP83869_RGMIICTL, |
| val); |
| } |
| |
| genphy_config_aneg(phydev); |
| return 0; |
| } |
| |
| static int dp83869_probe(struct phy_device *phydev) |
| { |
| struct dp83869_private *dp83869; |
| |
| dp83869 = kzalloc(sizeof(*dp83869), GFP_KERNEL); |
| if (!dp83869) |
| return -ENOMEM; |
| |
| phydev->priv = dp83869; |
| return 0; |
| } |
| |
| U_BOOT_PHY_DRIVER(dp83869) = { |
| .name = "TI DP83869", |
| .uid = 0x2000a0f1, |
| .mask = 0xfffffff0, |
| .features = PHY_GBIT_FEATURES, |
| .probe = dp83869_probe, |
| .config = &dp83869_config, |
| .startup = &genphy_startup, |
| .shutdown = &genphy_shutdown, |
| .readext = dp83869_readext, |
| .writeext = dp83869_writeext |
| }; |