blob: d715541bd4cb0e4db81bef95d14346a5bd06bffd [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2018 Álvaro Fernández Rojas <noltari@gmail.com>
*
* Derived from linux/arch/mips/bcm63xx/usb-common.c:
* Copyright 2008 Maxime Bizon <mbizon@freebox.fr>
* Copyright 2013 Florian Fainelli <florian@openwrt.org>
*/
#include <clk.h>
#include <dm.h>
#include <generic-phy.h>
#include <log.h>
#include <malloc.h>
#include <power-domain.h>
#include <reset.h>
#include <asm/io.h>
#include <dm/device.h>
#include <linux/bitops.h>
#include <linux/delay.h>
/* USBH Setup register */
#define USBH_SETUP_REG 0x00
#define USBH_SETUP_IOC BIT(4)
/* USBH PLL Control register */
#define USBH_PLL_REG 0x04
#define USBH_PLL_SUSP_EN BIT(27)
#define USBH_PLL_IDDQ_PWRDN BIT(31)
/* USBH Swap Control register */
#define USBH_SWAP_REG 0x0c
#define USBH_SWAP_OHCI_DATA BIT(0)
#define USBH_SWAP_OHCI_ENDIAN BIT(1)
#define USBH_SWAP_EHCI_DATA BIT(3)
#define USBH_SWAP_EHCI_ENDIAN BIT(4)
/* USBH Sim Control register */
#define USBH_SIM_REG 0x20
#define USBH_SIM_LADDR BIT(5)
struct bcm6318_usbh_priv {
void __iomem *regs;
};
static int bcm6318_usbh_init(struct phy *phy)
{
struct bcm6318_usbh_priv *priv = dev_get_priv(phy->dev);
/* enable pll control susp */
setbits_be32(priv->regs + USBH_PLL_REG, USBH_PLL_SUSP_EN);
/* configure to work in native cpu endian */
clrsetbits_be32(priv->regs + USBH_SWAP_REG,
USBH_SWAP_EHCI_ENDIAN | USBH_SWAP_OHCI_ENDIAN,
USBH_SWAP_EHCI_DATA | USBH_SWAP_OHCI_DATA);
/* setup config */
setbits_be32(priv->regs + USBH_SETUP_REG, USBH_SETUP_IOC);
/* disable pll control pwrdn */
clrbits_be32(priv->regs + USBH_PLL_REG, USBH_PLL_IDDQ_PWRDN);
/* sim control config */
setbits_be32(priv->regs + USBH_SIM_REG, USBH_SIM_LADDR);
return 0;
}
static struct phy_ops bcm6318_usbh_ops = {
.init = bcm6318_usbh_init,
};
static const struct udevice_id bcm6318_usbh_ids[] = {
{ .compatible = "brcm,bcm6318-usbh" },
{ /* sentinel */ }
};
static int bcm6318_usbh_probe(struct udevice *dev)
{
struct bcm6318_usbh_priv *priv = dev_get_priv(dev);
struct power_domain pwr_dom;
struct reset_ctl rst_ctl;
struct clk clk;
int ret;
priv->regs = dev_remap_addr(dev);
if (!priv->regs)
return -EINVAL;
/* enable usbh clock */
ret = clk_get_by_name(dev, "usbh", &clk);
if (ret < 0)
return ret;
ret = clk_enable(&clk);
if (ret < 0)
return ret;
/* enable power domain */
ret = power_domain_get(dev, &pwr_dom);
if (ret < 0)
return ret;
ret = power_domain_on(&pwr_dom);
if (ret < 0)
return ret;
ret = power_domain_free(&pwr_dom);
if (ret < 0)
return ret;
/* perform reset */
ret = reset_get_by_index(dev, 0, &rst_ctl);
if (ret < 0)
return ret;
ret = reset_deassert(&rst_ctl);
if (ret < 0)
return ret;
ret = reset_free(&rst_ctl);
if (ret < 0)
return ret;
mdelay(100);
return 0;
}
U_BOOT_DRIVER(bcm6318_usbh) = {
.name = "bcm6318-usbh",
.id = UCLASS_PHY,
.of_match = bcm6318_usbh_ids,
.ops = &bcm6318_usbh_ops,
.priv_auto = sizeof(struct bcm6318_usbh_priv),
.probe = bcm6318_usbh_probe,
};