drivers/spi/meson_spifc_a1.c - platform/external/u-boot - Gitiles

 // SPDX-License-Identifier: GPL-2.0
 /*
  * Driver for Amlogic A1 SPI flash controller (SPIFC)
  *
  * Copyright (c) 2023, SberDevices. All Rights Reserved.
  *
  * Author: Martin Kurbanov <mmkurbanov@sberdevices.ru>
  *
  * Ported to u-boot:
  * Author: Igor Prusov <ivprusov@sberdevices.ru>
  */

 #include <clk.h>
 #include <dm.h>
 #include <spi.h>
 #include <spi-mem.h>
 #include <asm/io.h>
 #include <linux/log2.h>
 #include <linux/iopoll.h>
 #include <linux/bitfield.h>

 #define SPIFC_A1_AHB_CTRL_REG		0x0
 #define SPIFC_A1_AHB_BUS_EN		BIT(31)

 #define SPIFC_A1_USER_CTRL0_REG		0x200
 #define SPIFC_A1_USER_REQUEST_ENABLE	BIT(31)
 #define SPIFC_A1_USER_REQUEST_FINISH	BIT(30)
 #define SPIFC_A1_USER_DATA_UPDATED	BIT(0)

 #define SPIFC_A1_USER_CTRL1_REG		0x204
 #define SPIFC_A1_USER_CMD_ENABLE	BIT(30)
 #define SPIFC_A1_USER_CMD_MODE		GENMASK(29, 28)
 #define SPIFC_A1_USER_CMD_CODE		GENMASK(27, 20)
 #define SPIFC_A1_USER_ADDR_ENABLE	BIT(19)
 #define SPIFC_A1_USER_ADDR_MODE		GENMASK(18, 17)
 #define SPIFC_A1_USER_ADDR_BYTES	GENMASK(16, 15)
 #define SPIFC_A1_USER_DOUT_ENABLE	BIT(14)
 #define SPIFC_A1_USER_DOUT_MODE		GENMASK(11, 10)
 #define SPIFC_A1_USER_DOUT_BYTES	GENMASK(9, 0)

 #define SPIFC_A1_USER_CTRL2_REG		0x208
 #define SPIFC_A1_USER_DUMMY_ENABLE	BIT(31)
 #define SPIFC_A1_USER_DUMMY_MODE	GENMASK(30, 29)
 #define SPIFC_A1_USER_DUMMY_CLK_SYCLES	GENMASK(28, 23)

 #define SPIFC_A1_USER_CTRL3_REG		0x20c
 #define SPIFC_A1_USER_DIN_ENABLE	BIT(31)
 #define SPIFC_A1_USER_DIN_MODE		GENMASK(28, 27)
 #define SPIFC_A1_USER_DIN_BYTES		GENMASK(25, 16)

 #define SPIFC_A1_USER_ADDR_REG		0x210

 #define SPIFC_A1_AHB_REQ_CTRL_REG	0x214
 #define SPIFC_A1_AHB_REQ_ENABLE		BIT(31)

 #define SPIFC_A1_ACTIMING0_REG		(0x0088 << 2)
 #define SPIFC_A1_TSLCH			GENMASK(31, 30)
 #define SPIFC_A1_TCLSH			GENMASK(29, 28)
 #define SPIFC_A1_TSHWL			GENMASK(20, 16)
 #define SPIFC_A1_TSHSL2			GENMASK(15, 12)
 #define SPIFC_A1_TSHSL1			GENMASK(11, 8)
 #define SPIFC_A1_TWHSL			GENMASK(7, 0)

 #define SPIFC_A1_DBUF_CTRL_REG		0x240
 #define SPIFC_A1_DBUF_DIR		BIT(31)
 #define SPIFC_A1_DBUF_AUTO_UPDATE_ADDR	BIT(30)
 #define SPIFC_A1_DBUF_ADDR		GENMASK(7, 0)

 #define SPIFC_A1_DBUF_DATA_REG		0x244

 #define SPIFC_A1_USER_DBUF_ADDR_REG	0x248

 #define SPIFC_A1_BUFFER_SIZE		512U

 #define SPIFC_A1_MAX_HZ			200000000
 #define SPIFC_A1_MIN_HZ			1000000

 #define SPIFC_A1_USER_CMD(op) ( \
 	SPIFC_A1_USER_CMD_ENABLE | \
 	FIELD_PREP(SPIFC_A1_USER_CMD_CODE, (op)->cmd.opcode) | \
 	FIELD_PREP(SPIFC_A1_USER_CMD_MODE, ilog2((op)->cmd.buswidth)))

 #define SPIFC_A1_USER_ADDR(op) ( \
 	SPIFC_A1_USER_ADDR_ENABLE | \
 	FIELD_PREP(SPIFC_A1_USER_ADDR_MODE, ilog2((op)->addr.buswidth)) | \
 	FIELD_PREP(SPIFC_A1_USER_ADDR_BYTES, (op)->addr.nbytes - 1))

 #define SPIFC_A1_USER_DUMMY(op) ( \
 	SPIFC_A1_USER_DUMMY_ENABLE | \
 	FIELD_PREP(SPIFC_A1_USER_DUMMY_MODE, ilog2((op)->dummy.buswidth)) | \
 	FIELD_PREP(SPIFC_A1_USER_DUMMY_CLK_SYCLES, (op)->dummy.nbytes << 3))

 #define SPIFC_A1_TSLCH_VAL	FIELD_PREP(SPIFC_A1_TSLCH, 1)
 #define SPIFC_A1_TCLSH_VAL	FIELD_PREP(SPIFC_A1_TCLSH, 1)
 #define SPIFC_A1_TSHWL_VAL	FIELD_PREP(SPIFC_A1_TSHWL, 7)
 #define SPIFC_A1_TSHSL2_VAL	FIELD_PREP(SPIFC_A1_TSHSL2, 7)
 #define SPIFC_A1_TSHSL1_VAL	FIELD_PREP(SPIFC_A1_TSHSL1, 7)
 #define SPIFC_A1_TWHSL_VAL	FIELD_PREP(SPIFC_A1_TWHSL, 2)
 #define SPIFC_A1_ACTIMING0_VAL	(SPIFC_A1_TSLCH_VAL | SPIFC_A1_TCLSH_VAL | \
 				 SPIFC_A1_TSHWL_VAL | SPIFC_A1_TSHSL2_VAL | \
 				 SPIFC_A1_TSHSL1_VAL | SPIFC_A1_TWHSL_VAL)

 struct amlogic_spifc_a1 {
 	struct clk clk;
 	void __iomem *base;
 	u32 curr_speed_hz;
 };

 static int amlogic_spifc_a1_request(struct amlogic_spifc_a1 *spifc, bool read)
 {
 	u32 mask = SPIFC_A1_USER_REQUEST_FINISH |
 		   (read ? SPIFC_A1_USER_DATA_UPDATED : 0);
 	u32 val;

 	writel(SPIFC_A1_USER_REQUEST_ENABLE,
 	       spifc->base + SPIFC_A1_USER_CTRL0_REG);

 	return readl_poll_timeout(spifc->base + SPIFC_A1_USER_CTRL0_REG,
 				  val, (val & mask) == mask,
 				  200 * 1000);
 }

 static void amlogic_spifc_a1_drain_buffer(struct amlogic_spifc_a1 *spifc,
 					  char *buf, u32 len)
 {
 	u32 data;
 	const u32 count = len / sizeof(data);
 	const u32 pad = len % sizeof(data);

 	writel(SPIFC_A1_DBUF_AUTO_UPDATE_ADDR,
 	       spifc->base + SPIFC_A1_DBUF_CTRL_REG);
 	readsl(spifc->base + SPIFC_A1_DBUF_DATA_REG, buf, count);

 	if (pad) {
 		data = readl(spifc->base + SPIFC_A1_DBUF_DATA_REG);
 		memcpy(buf + len - pad, &data, pad);
 	}
 }

 static void amlogic_spifc_a1_fill_buffer(struct amlogic_spifc_a1 *spifc,
 					 const char *buf, u32 len)
 {
 	u32 data;
 	const u32 count = len / sizeof(data);
 	const u32 pad = len % sizeof(data);

 	writel(SPIFC_A1_DBUF_DIR | SPIFC_A1_DBUF_AUTO_UPDATE_ADDR,
 	       spifc->base + SPIFC_A1_DBUF_CTRL_REG);
 	writesl(spifc->base + SPIFC_A1_DBUF_DATA_REG, buf, count);

 	if (pad) {
 		memcpy(&data, buf + len - pad, pad);
 		writel(data, spifc->base + SPIFC_A1_DBUF_DATA_REG);
 	}
 }

 static void amlogic_spifc_a1_user_init(struct amlogic_spifc_a1 *spifc)
 {
 	writel(0, spifc->base + SPIFC_A1_USER_CTRL0_REG);
 	writel(0, spifc->base + SPIFC_A1_USER_CTRL1_REG);
 	writel(0, spifc->base + SPIFC_A1_USER_CTRL2_REG);
 	writel(0, spifc->base + SPIFC_A1_USER_CTRL3_REG);
 }

 static void amlogic_spifc_a1_set_cmd(struct amlogic_spifc_a1 *spifc,
 				     u32 cmd_cfg)
 {
 	u32 val;

 	val = readl(spifc->base + SPIFC_A1_USER_CTRL1_REG);
 	val &= ~(SPIFC_A1_USER_CMD_MODE | SPIFC_A1_USER_CMD_CODE);
 	val |= cmd_cfg;
 	writel(val, spifc->base + SPIFC_A1_USER_CTRL1_REG);
 }

 static void amlogic_spifc_a1_set_addr(struct amlogic_spifc_a1 *spifc, u32 addr,
 				      u32 addr_cfg)
 {
 	u32 val;

 	writel(addr, spifc->base + SPIFC_A1_USER_ADDR_REG);

 	val = readl(spifc->base + SPIFC_A1_USER_CTRL1_REG);
 	val &= ~(SPIFC_A1_USER_ADDR_MODE | SPIFC_A1_USER_ADDR_BYTES);
 	val |= addr_cfg;
 	writel(val, spifc->base + SPIFC_A1_USER_CTRL1_REG);
 }

 static void amlogic_spifc_a1_set_dummy(struct amlogic_spifc_a1 *spifc,
 				       u32 dummy_cfg)
 {
 	u32 val = readl(spifc->base + SPIFC_A1_USER_CTRL2_REG);

 	val &= ~(SPIFC_A1_USER_DUMMY_MODE | SPIFC_A1_USER_DUMMY_CLK_SYCLES);
 	val |= dummy_cfg;
 	writel(val, spifc->base + SPIFC_A1_USER_CTRL2_REG);
 }

 static int amlogic_spifc_a1_read(struct amlogic_spifc_a1 *spifc, void *buf,
 				 u32 size, u32 mode)
 {
 	u32 val = readl(spifc->base + SPIFC_A1_USER_CTRL3_REG);
 	int ret;

 	val &= ~(SPIFC_A1_USER_DIN_MODE | SPIFC_A1_USER_DIN_BYTES);
 	val |= SPIFC_A1_USER_DIN_ENABLE;
 	val |= FIELD_PREP(SPIFC_A1_USER_DIN_MODE, mode);
 	val |= FIELD_PREP(SPIFC_A1_USER_DIN_BYTES, size);
 	writel(val, spifc->base + SPIFC_A1_USER_CTRL3_REG);

 	ret = amlogic_spifc_a1_request(spifc, true);
 	if (!ret)
 		amlogic_spifc_a1_drain_buffer(spifc, buf, size);

 	return ret;
 }

 static int amlogic_spifc_a1_write(struct amlogic_spifc_a1 *spifc,
 				  const void *buf, u32 size, u32 mode)
 {
 	u32 val;

 	amlogic_spifc_a1_fill_buffer(spifc, buf, size);

 	val = readl(spifc->base + SPIFC_A1_USER_CTRL1_REG);
 	val &= ~(SPIFC_A1_USER_DOUT_MODE | SPIFC_A1_USER_DOUT_BYTES);
 	val |= FIELD_PREP(SPIFC_A1_USER_DOUT_MODE, mode);
 	val |= FIELD_PREP(SPIFC_A1_USER_DOUT_BYTES, size);
 	val |= SPIFC_A1_USER_DOUT_ENABLE;
 	writel(val, spifc->base + SPIFC_A1_USER_CTRL1_REG);

 	return amlogic_spifc_a1_request(spifc, false);
 }

 static int amlogic_spifc_a1_set_freq(struct amlogic_spifc_a1 *spifc, u32 freq)
 {
 	int ret;

 	if (freq == spifc->curr_speed_hz)
 		return 0;

 	ret = clk_set_rate(&spifc->clk, freq);
 	if (ret)
 		return ret;

 	spifc->curr_speed_hz = freq;
 	return 0;
 }

 static int amlogic_spifc_a1_exec_op(struct spi_slave *slave,
 				    const struct spi_mem_op *op)
 {
 	struct amlogic_spifc_a1 *spifc = dev_get_priv(slave->dev->parent);
 	size_t data_size = op->data.nbytes;
 	int ret;

 	ret = amlogic_spifc_a1_set_freq(spifc, slave->max_hz);
 	if (ret)
 		return ret;

 	amlogic_spifc_a1_user_init(spifc);
 	amlogic_spifc_a1_set_cmd(spifc, SPIFC_A1_USER_CMD(op));

 	if (op->addr.nbytes)
 		amlogic_spifc_a1_set_addr(spifc, op->addr.val,
 					  SPIFC_A1_USER_ADDR(op));

 	if (op->dummy.nbytes)
 		amlogic_spifc_a1_set_dummy(spifc, SPIFC_A1_USER_DUMMY(op));

 	if (data_size) {
 		u32 mode = ilog2(op->data.buswidth);

 		writel(0, spifc->base + SPIFC_A1_USER_DBUF_ADDR_REG);

 		if (op->data.dir == SPI_MEM_DATA_IN)
 			ret = amlogic_spifc_a1_read(spifc, op->data.buf.in,
 						    data_size, mode);
 		else
 			ret = amlogic_spifc_a1_write(spifc, op->data.buf.out,
 						     data_size, mode);
 	} else {
 		ret = amlogic_spifc_a1_request(spifc, false);
 	}

 	return ret;
 }

 static int amlogic_spifc_a1_adjust_op_size(struct spi_slave *slave,
 					   struct spi_mem_op *op)
 {
 	op->data.nbytes = min(op->data.nbytes, SPIFC_A1_BUFFER_SIZE);
 	return 0;
 }

 static void amlogic_spifc_a1_hw_init(struct amlogic_spifc_a1 *spifc)
 {
 	u32 regv;

 	regv = readl(spifc->base + SPIFC_A1_AHB_REQ_CTRL_REG);
 	regv &= ~(SPIFC_A1_AHB_REQ_ENABLE);
 	writel(regv, spifc->base + SPIFC_A1_AHB_REQ_CTRL_REG);

 	regv = readl(spifc->base + SPIFC_A1_AHB_CTRL_REG);
 	regv &= ~(SPIFC_A1_AHB_BUS_EN);
 	writel(regv, spifc->base + SPIFC_A1_AHB_CTRL_REG);

 	writel(SPIFC_A1_ACTIMING0_VAL, spifc->base + SPIFC_A1_ACTIMING0_REG);

 	writel(0, spifc->base + SPIFC_A1_USER_DBUF_ADDR_REG);
 }

 static const struct spi_controller_mem_ops amlogic_spifc_a1_mem_ops = {
 	.exec_op = amlogic_spifc_a1_exec_op,
 	.adjust_op_size = amlogic_spifc_a1_adjust_op_size,
 };

 static int amlogic_spifc_a1_probe(struct udevice *dev)
 {
 	struct amlogic_spifc_a1 *spifc = dev_get_priv(dev);
 	int ret;
 	struct udevice *bus = dev;

 	spifc->base = dev_read_addr_ptr(dev);
 	if (!spifc->base)
 		return -EINVAL;

 	ret = clk_get_by_index(bus, 0, &spifc->clk);
 	if (ret) {
 		pr_err("can't get clk spifc_gate!\n");
 		return ret;
 	}

 	ret = clk_enable(&spifc->clk);
 	if (ret) {
 		pr_err("enable clk fail\n");
 		return ret;
 	}

 	amlogic_spifc_a1_hw_init(spifc);

 	return 0;
 }

 static int amlogic_spifc_a1_remove(struct udevice *dev)
 {
 	struct amlogic_spifc_a1 *spifc = dev_get_priv(dev);

 	clk_free(&spifc->clk);

 	return 0;
 }

 static const struct udevice_id meson_spifc_ids[] = {
 	{ .compatible = "amlogic,a1-spifc", },
 	{ }
 };

 int amlogic_spifc_a1_set_speed(struct udevice *bus, uint hz)
 {
 	return 0;
 }

 int amlogic_spifc_a1_set_mode(struct udevice *bus, uint mode)
 {
 	return 0;
 }

 static const struct dm_spi_ops amlogic_spifc_a1_ops = {
 	.mem_ops = &amlogic_spifc_a1_mem_ops,
 	.set_speed = amlogic_spifc_a1_set_speed,
 	.set_mode = amlogic_spifc_a1_set_mode,
 };

 U_BOOT_DRIVER(meson_spifc_a1) = {
 	.name		= "meson_spifc_a1",
 	.id		= UCLASS_SPI,
 	.of_match	= meson_spifc_ids,
 	.ops		= &amlogic_spifc_a1_ops,
 	.probe		= amlogic_spifc_a1_probe,
 	.remove		= amlogic_spifc_a1_remove,
 	.priv_auto	= sizeof(struct amlogic_spifc_a1),
 };
	// SPDX-License-Identifier: GPL-2.0
	/*
	* Driver for Amlogic A1 SPI flash controller (SPIFC)
	*
	* Copyright (c) 2023, SberDevices. All Rights Reserved.
	*
	* Author: Martin Kurbanov <mmkurbanov@sberdevices.ru>
	*
	* Ported to u-boot:
	* Author: Igor Prusov <ivprusov@sberdevices.ru>
	*/

	#include <clk.h>
	#include <dm.h>
	#include <spi.h>
	#include <spi-mem.h>
	#include <asm/io.h>
	#include <linux/log2.h>
	#include <linux/iopoll.h>
	#include <linux/bitfield.h>

	#define SPIFC_A1_AHB_CTRL_REG 0x0
	#define SPIFC_A1_AHB_BUS_EN BIT(31)

	#define SPIFC_A1_USER_CTRL0_REG 0x200
	#define SPIFC_A1_USER_REQUEST_ENABLE BIT(31)
	#define SPIFC_A1_USER_REQUEST_FINISH BIT(30)
	#define SPIFC_A1_USER_DATA_UPDATED BIT(0)

	#define SPIFC_A1_USER_CTRL1_REG 0x204
	#define SPIFC_A1_USER_CMD_ENABLE BIT(30)
	#define SPIFC_A1_USER_CMD_MODE GENMASK(29, 28)
	#define SPIFC_A1_USER_CMD_CODE GENMASK(27, 20)
	#define SPIFC_A1_USER_ADDR_ENABLE BIT(19)
	#define SPIFC_A1_USER_ADDR_MODE GENMASK(18, 17)
	#define SPIFC_A1_USER_ADDR_BYTES GENMASK(16, 15)
	#define SPIFC_A1_USER_DOUT_ENABLE BIT(14)
	#define SPIFC_A1_USER_DOUT_MODE GENMASK(11, 10)
	#define SPIFC_A1_USER_DOUT_BYTES GENMASK(9, 0)

	#define SPIFC_A1_USER_CTRL2_REG 0x208
	#define SPIFC_A1_USER_DUMMY_ENABLE BIT(31)
	#define SPIFC_A1_USER_DUMMY_MODE GENMASK(30, 29)
	#define SPIFC_A1_USER_DUMMY_CLK_SYCLES GENMASK(28, 23)

	#define SPIFC_A1_USER_CTRL3_REG 0x20c
	#define SPIFC_A1_USER_DIN_ENABLE BIT(31)
	#define SPIFC_A1_USER_DIN_MODE GENMASK(28, 27)
	#define SPIFC_A1_USER_DIN_BYTES GENMASK(25, 16)

	#define SPIFC_A1_USER_ADDR_REG 0x210

	#define SPIFC_A1_AHB_REQ_CTRL_REG 0x214
	#define SPIFC_A1_AHB_REQ_ENABLE BIT(31)

	#define SPIFC_A1_ACTIMING0_REG (0x0088 << 2)
	#define SPIFC_A1_TSLCH GENMASK(31, 30)
	#define SPIFC_A1_TCLSH GENMASK(29, 28)
	#define SPIFC_A1_TSHWL GENMASK(20, 16)
	#define SPIFC_A1_TSHSL2 GENMASK(15, 12)
	#define SPIFC_A1_TSHSL1 GENMASK(11, 8)
	#define SPIFC_A1_TWHSL GENMASK(7, 0)

	#define SPIFC_A1_DBUF_CTRL_REG 0x240
	#define SPIFC_A1_DBUF_DIR BIT(31)
	#define SPIFC_A1_DBUF_AUTO_UPDATE_ADDR BIT(30)
	#define SPIFC_A1_DBUF_ADDR GENMASK(7, 0)

	#define SPIFC_A1_DBUF_DATA_REG 0x244

	#define SPIFC_A1_USER_DBUF_ADDR_REG 0x248

	#define SPIFC_A1_BUFFER_SIZE 512U

	#define SPIFC_A1_MAX_HZ 200000000
	#define SPIFC_A1_MIN_HZ 1000000

	#define SPIFC_A1_USER_CMD(op) ( \
	SPIFC_A1_USER_CMD_ENABLE \| \
	FIELD_PREP(SPIFC_A1_USER_CMD_CODE, (op)->cmd.opcode) \| \
	FIELD_PREP(SPIFC_A1_USER_CMD_MODE, ilog2((op)->cmd.buswidth)))

	#define SPIFC_A1_USER_ADDR(op) ( \
	SPIFC_A1_USER_ADDR_ENABLE \| \
	FIELD_PREP(SPIFC_A1_USER_ADDR_MODE, ilog2((op)->addr.buswidth)) \| \
	FIELD_PREP(SPIFC_A1_USER_ADDR_BYTES, (op)->addr.nbytes - 1))

	#define SPIFC_A1_USER_DUMMY(op) ( \
	SPIFC_A1_USER_DUMMY_ENABLE \| \
	FIELD_PREP(SPIFC_A1_USER_DUMMY_MODE, ilog2((op)->dummy.buswidth)) \| \
	FIELD_PREP(SPIFC_A1_USER_DUMMY_CLK_SYCLES, (op)->dummy.nbytes << 3))

	#define SPIFC_A1_TSLCH_VAL FIELD_PREP(SPIFC_A1_TSLCH, 1)
	#define SPIFC_A1_TCLSH_VAL FIELD_PREP(SPIFC_A1_TCLSH, 1)
	#define SPIFC_A1_TSHWL_VAL FIELD_PREP(SPIFC_A1_TSHWL, 7)
	#define SPIFC_A1_TSHSL2_VAL FIELD_PREP(SPIFC_A1_TSHSL2, 7)
	#define SPIFC_A1_TSHSL1_VAL FIELD_PREP(SPIFC_A1_TSHSL1, 7)
	#define SPIFC_A1_TWHSL_VAL FIELD_PREP(SPIFC_A1_TWHSL, 2)
	#define SPIFC_A1_ACTIMING0_VAL (SPIFC_A1_TSLCH_VAL \| SPIFC_A1_TCLSH_VAL \| \
	SPIFC_A1_TSHWL_VAL \| SPIFC_A1_TSHSL2_VAL \| \
	SPIFC_A1_TSHSL1_VAL \| SPIFC_A1_TWHSL_VAL)

	struct amlogic_spifc_a1 {
	struct clk clk;
	void __iomem *base;
	u32 curr_speed_hz;
	};

	static int amlogic_spifc_a1_request(struct amlogic_spifc_a1 *spifc, bool read)
	{
	u32 mask = SPIFC_A1_USER_REQUEST_FINISH \|
	(read ? SPIFC_A1_USER_DATA_UPDATED : 0);
	u32 val;

	writel(SPIFC_A1_USER_REQUEST_ENABLE,
	spifc->base + SPIFC_A1_USER_CTRL0_REG);

	return readl_poll_timeout(spifc->base + SPIFC_A1_USER_CTRL0_REG,
	val, (val & mask) == mask,
	200 * 1000);
	}

	static void amlogic_spifc_a1_drain_buffer(struct amlogic_spifc_a1 *spifc,
	char *buf, u32 len)
	{
	u32 data;
	const u32 count = len / sizeof(data);
	const u32 pad = len % sizeof(data);

	writel(SPIFC_A1_DBUF_AUTO_UPDATE_ADDR,
	spifc->base + SPIFC_A1_DBUF_CTRL_REG);
	readsl(spifc->base + SPIFC_A1_DBUF_DATA_REG, buf, count);

	if (pad) {
	data = readl(spifc->base + SPIFC_A1_DBUF_DATA_REG);
	memcpy(buf + len - pad, &data, pad);
	}
	}

	static void amlogic_spifc_a1_fill_buffer(struct amlogic_spifc_a1 *spifc,
	const char *buf, u32 len)
	{
	u32 data;
	const u32 count = len / sizeof(data);
	const u32 pad = len % sizeof(data);

	writel(SPIFC_A1_DBUF_DIR \| SPIFC_A1_DBUF_AUTO_UPDATE_ADDR,
	spifc->base + SPIFC_A1_DBUF_CTRL_REG);
	writesl(spifc->base + SPIFC_A1_DBUF_DATA_REG, buf, count);

	if (pad) {
	memcpy(&data, buf + len - pad, pad);
	writel(data, spifc->base + SPIFC_A1_DBUF_DATA_REG);
	}
	}

	static void amlogic_spifc_a1_user_init(struct amlogic_spifc_a1 *spifc)
	{
	writel(0, spifc->base + SPIFC_A1_USER_CTRL0_REG);
	writel(0, spifc->base + SPIFC_A1_USER_CTRL1_REG);
	writel(0, spifc->base + SPIFC_A1_USER_CTRL2_REG);
	writel(0, spifc->base + SPIFC_A1_USER_CTRL3_REG);
	}

	static void amlogic_spifc_a1_set_cmd(struct amlogic_spifc_a1 *spifc,
	u32 cmd_cfg)
	{
	u32 val;

	val = readl(spifc->base + SPIFC_A1_USER_CTRL1_REG);
	val &= ~(SPIFC_A1_USER_CMD_MODE \| SPIFC_A1_USER_CMD_CODE);
	val \|= cmd_cfg;
	writel(val, spifc->base + SPIFC_A1_USER_CTRL1_REG);
	}

	static void amlogic_spifc_a1_set_addr(struct amlogic_spifc_a1 *spifc, u32 addr,
	u32 addr_cfg)
	{
	u32 val;

	writel(addr, spifc->base + SPIFC_A1_USER_ADDR_REG);

	val = readl(spifc->base + SPIFC_A1_USER_CTRL1_REG);
	val &= ~(SPIFC_A1_USER_ADDR_MODE \| SPIFC_A1_USER_ADDR_BYTES);
	val \|= addr_cfg;
	writel(val, spifc->base + SPIFC_A1_USER_CTRL1_REG);
	}

	static void amlogic_spifc_a1_set_dummy(struct amlogic_spifc_a1 *spifc,
	u32 dummy_cfg)
	{
	u32 val = readl(spifc->base + SPIFC_A1_USER_CTRL2_REG);

	val &= ~(SPIFC_A1_USER_DUMMY_MODE \| SPIFC_A1_USER_DUMMY_CLK_SYCLES);
	val \|= dummy_cfg;
	writel(val, spifc->base + SPIFC_A1_USER_CTRL2_REG);
	}

	static int amlogic_spifc_a1_read(struct amlogic_spifc_a1 spifc, void buf,
	u32 size, u32 mode)
	{
	u32 val = readl(spifc->base + SPIFC_A1_USER_CTRL3_REG);
	int ret;

	val &= ~(SPIFC_A1_USER_DIN_MODE \| SPIFC_A1_USER_DIN_BYTES);
	val \|= SPIFC_A1_USER_DIN_ENABLE;
	val \|= FIELD_PREP(SPIFC_A1_USER_DIN_MODE, mode);
	val \|= FIELD_PREP(SPIFC_A1_USER_DIN_BYTES, size);
	writel(val, spifc->base + SPIFC_A1_USER_CTRL3_REG);

	ret = amlogic_spifc_a1_request(spifc, true);
	if (!ret)
	amlogic_spifc_a1_drain_buffer(spifc, buf, size);

	return ret;
	}

	static int amlogic_spifc_a1_write(struct amlogic_spifc_a1 *spifc,
	const void *buf, u32 size, u32 mode)
	{
	u32 val;

	amlogic_spifc_a1_fill_buffer(spifc, buf, size);

	val = readl(spifc->base + SPIFC_A1_USER_CTRL1_REG);
	val &= ~(SPIFC_A1_USER_DOUT_MODE \| SPIFC_A1_USER_DOUT_BYTES);
	val \|= FIELD_PREP(SPIFC_A1_USER_DOUT_MODE, mode);
	val \|= FIELD_PREP(SPIFC_A1_USER_DOUT_BYTES, size);
	val \|= SPIFC_A1_USER_DOUT_ENABLE;
	writel(val, spifc->base + SPIFC_A1_USER_CTRL1_REG);

	return amlogic_spifc_a1_request(spifc, false);
	}

	static int amlogic_spifc_a1_set_freq(struct amlogic_spifc_a1 *spifc, u32 freq)
	{
	int ret;

	if (freq == spifc->curr_speed_hz)
	return 0;

	ret = clk_set_rate(&spifc->clk, freq);
	if (ret)
	return ret;

	spifc->curr_speed_hz = freq;
	return 0;
	}

	static int amlogic_spifc_a1_exec_op(struct spi_slave *slave,
	const struct spi_mem_op *op)
	{
	struct amlogic_spifc_a1 *spifc = dev_get_priv(slave->dev->parent);
	size_t data_size = op->data.nbytes;
	int ret;

	ret = amlogic_spifc_a1_set_freq(spifc, slave->max_hz);
	if (ret)
	return ret;

	amlogic_spifc_a1_user_init(spifc);
	amlogic_spifc_a1_set_cmd(spifc, SPIFC_A1_USER_CMD(op));

	if (op->addr.nbytes)
	amlogic_spifc_a1_set_addr(spifc, op->addr.val,
	SPIFC_A1_USER_ADDR(op));

	if (op->dummy.nbytes)
	amlogic_spifc_a1_set_dummy(spifc, SPIFC_A1_USER_DUMMY(op));

	if (data_size) {
	u32 mode = ilog2(op->data.buswidth);

	writel(0, spifc->base + SPIFC_A1_USER_DBUF_ADDR_REG);

	if (op->data.dir == SPI_MEM_DATA_IN)
	ret = amlogic_spifc_a1_read(spifc, op->data.buf.in,
	data_size, mode);
	else
	ret = amlogic_spifc_a1_write(spifc, op->data.buf.out,
	data_size, mode);
	} else {
	ret = amlogic_spifc_a1_request(spifc, false);
	}

	return ret;
	}

	static int amlogic_spifc_a1_adjust_op_size(struct spi_slave *slave,
	struct spi_mem_op *op)
	{
	op->data.nbytes = min(op->data.nbytes, SPIFC_A1_BUFFER_SIZE);
	return 0;
	}

	static void amlogic_spifc_a1_hw_init(struct amlogic_spifc_a1 *spifc)
	{
	u32 regv;

	regv = readl(spifc->base + SPIFC_A1_AHB_REQ_CTRL_REG);
	regv &= ~(SPIFC_A1_AHB_REQ_ENABLE);
	writel(regv, spifc->base + SPIFC_A1_AHB_REQ_CTRL_REG);

	regv = readl(spifc->base + SPIFC_A1_AHB_CTRL_REG);
	regv &= ~(SPIFC_A1_AHB_BUS_EN);
	writel(regv, spifc->base + SPIFC_A1_AHB_CTRL_REG);

	writel(SPIFC_A1_ACTIMING0_VAL, spifc->base + SPIFC_A1_ACTIMING0_REG);

	writel(0, spifc->base + SPIFC_A1_USER_DBUF_ADDR_REG);
	}

	static const struct spi_controller_mem_ops amlogic_spifc_a1_mem_ops = {
	.exec_op = amlogic_spifc_a1_exec_op,
	.adjust_op_size = amlogic_spifc_a1_adjust_op_size,
	};

	static int amlogic_spifc_a1_probe(struct udevice *dev)
	{
	struct amlogic_spifc_a1 *spifc = dev_get_priv(dev);
	int ret;
	struct udevice *bus = dev;

	spifc->base = dev_read_addr_ptr(dev);
	if (!spifc->base)
	return -EINVAL;

	ret = clk_get_by_index(bus, 0, &spifc->clk);
	if (ret) {
	pr_err("can't get clk spifc_gate!\n");
	return ret;
	}

	ret = clk_enable(&spifc->clk);
	if (ret) {
	pr_err("enable clk fail\n");
	return ret;
	}

	amlogic_spifc_a1_hw_init(spifc);

	return 0;
	}

	static int amlogic_spifc_a1_remove(struct udevice *dev)
	{
	struct amlogic_spifc_a1 *spifc = dev_get_priv(dev);

	clk_free(&spifc->clk);

	return 0;
	}

	static const struct udevice_id meson_spifc_ids[] = {
	{ .compatible = "amlogic,a1-spifc", },
	{ }
	};

	int amlogic_spifc_a1_set_speed(struct udevice *bus, uint hz)
	{
	return 0;
	}

	int amlogic_spifc_a1_set_mode(struct udevice *bus, uint mode)
	{
	return 0;
	}

	static const struct dm_spi_ops amlogic_spifc_a1_ops = {
	.mem_ops = &amlogic_spifc_a1_mem_ops,
	.set_speed = amlogic_spifc_a1_set_speed,
	.set_mode = amlogic_spifc_a1_set_mode,
	};

	U_BOOT_DRIVER(meson_spifc_a1) = {
	.name = "meson_spifc_a1",
	.id = UCLASS_SPI,
	.of_match = meson_spifc_ids,
	.ops = &amlogic_spifc_a1_ops,
	.probe = amlogic_spifc_a1_probe,
	.remove = amlogic_spifc_a1_remove,
	.priv_auto = sizeof(struct amlogic_spifc_a1),
	};